2012 Honda CR V Owners Manual

Menu Display

Selector knob can be scrolled to the direction(s).

to switch between the normal and

Press extended display for some functions.

Selector knob: Rotate left or right to scroll through the available choices. Press your selection. SETUP button: Press to select any mode such as the Auto Select (A.SEL), Radio Data System (RDS), Play Mode, Adjust Clock, or the Title Display.

to set

button: Press to go back to the

previous display.

1Audio System Basic Operation

These indications are used to show how to operate the selector knob. Rotate Press

to select.

to enter.

Press the SOURCE, (+, (-, steering wheel to change any audio setting.

or

button on the

2 Audio Remote Controls P. 209

SETUP Menu Items

2 Auto Select (A.SEL) P. 162
2 Radio Data System (RDS) P. 162
2 Play Mode P. 165
2 Adjust Clock P. 98

159

CR-V-31T0A600.book 160 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuAdjusting the Sound

Adjusting the Sound

Press the the setting.

button, and rotate

to adjust

1Adjusting the Sound

When the adjustment level reaches the center, you will see C in the display.

The SVC has four modes: OFF, LOW, MID, and HIGH. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.

Button

Each time you press the mode switches as follows.

button, a sound

Selector Knob

BASS is selectable.

160

Speed-sensitive Volume Compensation

CR-V-31T0A600.book 161 ページ ２０１１年８月８日　月曜日　午後６時２６分

Playing the AM/FM Radio

uuAudio System Basic OperationuPlaying the AM/FM Radio

Buttons

Press to display and select an RDS category.

SCAN Button Press to sample each of the strongest stations on the selected band for 10 seconds. To turn off scan, press the button again.

FM Button AM Button Press to select a band.

SEEK/SKIP Buttons Press to search up and down the selected band for a station with a strong signal.

(Power) Button

Press to turn the audio system on and off.

Preset Buttons (1-6) To store a station: 1. Tune to the selected station. 2. Pick a preset button and hold it

until you hear a beep.

To listen to a stored station, select a band, then press the preset button.

Selector Knob Turn to adjust the volume. Press and turn to tune the radio frequency.

SETUP Button Press to select Auto Select (A.SEL) or Radio Data System (RDS).

Continued

161

CR-V-31T0A600.book 162 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying the AM/FM Radio

■ Auto Select (A.SEL) Use the auto select feature to scan both bands and store the strongest station in each preset. 1. Press the SETUP button. 2. Press

to enter the auto select mode.

u The system goes into scan mode for several seconds.

To turn off auto select, press

again. This restores the presets you originally set.

■ Radio Data System (RDS) Provides text data information related to your selected RDS capable FM station.

■ RDS INFO ON Press the SETUP button twice then press while listening to an RDS capable station. The station name is displayed. To turn off the RDS information, press again.

■ To find an RDS station from your selected program category

1. Press the

button to display and

select an RDS category.

2. Use SEEK/SKIP or SCAN to select an RDS

station.

1Playing the AM/FM Radio

The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.

Switching the Audio Mode Press the SOURCE button on the steering wheel.

2 Audio Remote Controls P. 209

You can store six AM stations and twelve FM stations into the preset button memory. FM1 and FM2 let you store six stations each.

A.SEL function scans and stores up to six AM stations and twelve FM stations with a strong signal into the preset button memory.

If you do not like the stations auto select has stored, you can manually store your preferred frequencies.

1Radio Data System (RDS)

The display shows up to 16 characters of text data.

RDS Category

162

CR-V-31T0A600.book 163 ページ ２０１１年８月８日　月曜日　午後６時２６分

Playing a CD Your audio system supports audio CDs, CD-Rs, and CD-RWs in either MP3 or WMA format. With the CD loaded, press the CD button.

uuAudio System Basic OperationuPlaying a CD

Buttons

Press to change folders (MP3 or WMA).

SCAN Button You will get a 10-second sampling of each song. ● Press to sample all tracks on the CD (all files in the current folder in MP3 or WMA).

● Press two times to sample the first file in each of the main folders (MP3 or WMA).

● To turn off scan, press and

hold the button.

SEEK/SKIP Buttons Press tracks (files in MP3 or WMA).

to change

or

(Power) Button

Press to turn the audio system on and off.

CD Slot Insert a CD about halfway into the CD slot.

CD Button Press to play a CD.

(CD Eject) Button

Press to eject a CD.

Selector Knob Turn to adjust the volume. Press and turn to change tracks/ files or select an item, then press to set your selection.

SETUP Button Press to select Play Mode or Title Display.

Continued

163

CR-V-31T0A600.book 164 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a CD

■ How to Select a File from a Folder with the Selector Knob

(MP3/WMA)

1. Press

to switch the display to a folder list.

2. Rotate

to select a folder.

3. Press

to change the display to a list of

files in that folder.

4. Rotate

to select a file, then press

Folder Selection

Track Selection

164

1Playing a CD

NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.

WMA files protected by digital rights management (DRM) cannot be played. The audio system displays UNPLAYABLE, then skips to the next file.

Text data appears on the display under the following circumstances: • When you select a new folder, file, or track. • When you change the audio mode to CD. • When you insert a CD.

The display shows up to 16 characters of text data.

If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.

CR-V-31T0A600.book 165 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a CD

■ How to Select a Play Mode You can select repeat, random, and scan modes when playing a track or file.

1. Press the SETUP button.

1How to Select a Play Mode

button to go back to the previous

Press the display, and press the SETUP button twice to cancel this setting mode.

Play Mode Items

2. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate

to select NORMAL PLAY, then press

Play Mode Menu Items NORMAL PLAY RPT ONE TRK: Repeats the current track/file(s). RPT ONE FLD current folder. RDM IN DISC: Plays all tracks/files in random order. RDM IN FLD : Plays all files in the current MP3/WMA folder in random order.

: Repeats all files in the

MP3/WMA

Continued

165

1How to Select a Title Display

Press the button to go back to the previous display, and press the SETUP button to cancel this setting mode.

: File number and folder number

: Folder name

Title Display Mode Menu Items NORMAL: Track number MP3/WMA FOLDER FILE ALBUM: Album name TRACK: Track name ARTIST: Artist name

: File name

MP3/WMA

MP3/WMA

CR-V-31T0A600.book 166 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a CD

■ How to Select a Title Display You can select an item to be shown on the display if the CD was recorded with text data.

Title Display Mode

1. Press the SETUP button twice. 2. Rotate

to select a title display mode,

then press

166

CR-V-31T0A600.book 167 ページ ２０１１年８月８日　月曜日　午後６時２６分

Playing an iPod® Connect the iPod® using your dock connector to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 157

uuAudio System Basic OperationuPlaying an iPod®

Buttons to go back to the

Press previous display. Press

to set your selection.

SEEK/SKIP Buttons Press songs.

or

to change

(Power) Button

Press to turn the audio system on and off.

AUX Button Press to select iPod® (if connected).

Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

SETUP Button Press to display menu items.

Continued

167

CR-V-31T0A600.book 168 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying an iPod®

■ How to Select a File from the iPod® Menu

1. Press

to display the iPod® menu.

1Playing an iPod®

Available operating functions vary on models or versions. Some functions may not be available on the vehicle's audio system.

If there is a problem, you may see an error message on the audio display.

2 iPod®/USB Flash Drive P. 206

iPod® Menu

2. Rotate

to select a menu.

3. Press 4. Rotate

to display the items on that menu.

to select an item, then press

168

CR-V-31T0A600.book 169 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ How to Select a Play Mode You can select repeat and shuffle modes when playing a file.

1. Press the SETUP button.

Play Mode Items

2. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate

to select NORMAL PLAY, then press

uuAudio System Basic OperationuPlaying an iPod®

1How to Select a Play Mode Play Mode Menu Items NORMAL PLAY SHUFFLE OFF: Turns off the shuffle mode. SHUFFLE: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. SHUFFLE ALBUMS: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. REPEAT OFF: Turns off the repeat mode. REPEAT ONE TRACK: Repeats the current track.

169

CR-V-31T0A600.book 170 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

Playing a USB Flash Drive Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 157

Buttons to skip to the next to skip to the

Press folder, and beginning of the previous folder.

SCAN Button You will get a 10-second sampling of each file. ● Press to sample all files in

the current folder.

● Press two times to sample the first file in each of the main folders.

● To turn off scan, press and

hold the button.

SEEK/SKIP Buttons Press

or

to change files.

*1:Only AAC format files recorded with iTunes® are playable on this unit.

170

(Power) Button

Press to turn the audio system on and off.

Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

AUX Button Press to select USB flash drive (if connected).

SETUP Button Press to display menu items.

CR-V-31T0A600.book 171 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

■ How to Select a File from a Folder with the Selector Knob

1. Press

to switch the display to a folder list.

Folder Selection

2. Rotate

to select a folder.

Track Selection

3. Press

to change the display to a list of

files in that folder.

4. Rotate

to select a file, then press

1Playing a USB Flash Drive

Use the recommended USB flash drives.

2 General Information on the Audio System

P. 210

Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays Unplayable File, and then skips to the next file.

If there is a problem, you may see an error message on the audio display.

2 iPod®/USB Flash Drive P. 206

Continued

171

1How to Select a Play Mode Play Mode Menu Items NORMAL PLAY REPEAT ONE TRACK: Repeats the current file. REPEAT ONE FOLDER: Repeats all files in the current folder. RANDOM IN FOLDER: Plays all files in the current folder in random order. RANDOM ALL: Plays all files in random order.

CR-V-31T0A600.book 172 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

■ How to Select a Play Mode You can select repeat, random, and scan modes when playing a file.

1. Press the SETUP button.

Play Mode Items

2. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate

to select NORMAL PLAY, then press

172

CR-V-31T0A600.book 173 ページ ２０１１年８月８日　月曜日　午後６時２６分

Audio System Basic Operation

Models with multi-information display To use the audio system function, the ignition switch must be in ACCESSORY (q or ON (w.

SETUP Button

Use the selector knob or SETUP button to access some audio functions.

Button

Selector Knob

Menu Display

to switch between the normal and

Press extended display for some functions.

Selector knob: Rotate left or right to scroll through the available choices. Press your selection. SETUP button: Press to select any mode such as the Auto Select, RDS Information, Sound Settings, Play Mode, Resume/Pause *, or Adjust Clock.

to set

button: Press to go back to the

previous display.

* Not available on all models

1Audio System Basic Operation

These indications are used to show how to operate the selector knob. Rotate Press

to select.

to enter.

Press the SOURCE, (+, (-, steering wheel to change any audio setting.

or

button on the

2 Audio Remote Controls P. 209

SETUP Menu Items

2 Auto Select P. 176
2 RDS information P. 177
2 Sound Settings P. 174
2 Play Mode P. 182
2 Resume/Pause P. 192
2 Adjust Clock P. 98

173

CR-V-31T0A600.book 174 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuAdjusting the Sound

Adjusting the Sound

SETUP Button

Press the SETUP button, and rotate select Sound Settings, then press

to

. Rotate

to scroll through the following choices:

1Adjusting the Sound

The SVC has four modes: OFF, LOW, MID, and HIGH. SVC adjusts the volume level based on the vehicle speed. As you go faster, audio volume increases. As you slow down, audio volume decreases.

Selector Knob

TREBLE is selectable.

174

* Not available on all models

Subwoofer *

Speed-sensitive Volume Compensation

CR-V-31T0A600.book 175 ページ ２０１１年８月８日　月曜日　午後６時２６分

Playing the AM/FM Radio

uuAudio System Basic OperationuPlaying the AM/FM Radio

Buttons

Press to display and select an RDS category.

AM Button FM Button Press to select a band.

SCAN Button Press to sample each of the strongest stations on the selected band for 10 seconds. To turn off scan, press the button again.

FM/AM Button * Press to select a band.

SEEK/SKIP Buttons Press to search up and down the selected band for a station with a strong signal.

* Not available on all models

(Power) Button

Press to turn the audio system on and off.

Preset Buttons (1-6) To store a station: 1. Tune to the selected station. 2. Pick a preset button and hold it

until you hear a beep.

To listen to a stored station, select a band, then press the preset button.

Selector Knob Turn to adjust the volume. Press and turn to tune the radio frequency.

SETUP Button Press to display menu items.

Continued

175

CR-V-31T0A600.book 176 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying the AM/FM Radio

■ Auto Select Use the auto select feature to scan both bands and store the strongest station in each preset.

1. Press the SETUP button. 2. Rotate

to select Auto Select, then press

To turn off auto select, press restores the presets you originally set.

again. This

176

1Playing the AM/FM Radio

The ST indicator appears on the display indicating stereo FM broadcasts. Stereo reproduction in AM is not available.

Switching the Audio Mode Press the SOURCE button on the steering wheel.

2 Audio Remote Controls P. 209

You can store six AM stations and twelve FM stations into the preset button memory. FM1 and FM2 let you store six stations each.

Auto Select function scans and stores up to six AM stations and twelve FM stations with a strong signal into the preset button memory.

If you do not like the stations auto select has stored, you can manually store your preferred frequencies.

CR-V-31T0A600.book 177 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying the AM/FM Radio

■ Radio Data System (RDS) Provides text data information related to your selected RDS capable FM station.

■ RDS information

1. Press the SETUP button and rotate

to

select RDS Information.

2. Each time you press

, the RDS

Information switches between on and off.

■ To find an RDS station from your selected program category

RDS Category

1. Press the

button to display and

select an RDS category.

2. Use SEEK/SKIP or SCAN to select an RDS

station.

177

CR-V-31T0A600.book 178 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying the XM® Radio*

Playing the XM® Radio*

Buttons to skip to the next

Press category, and the previous category.

to skip to

SCAN Button Press to sample all channels (in the channel mode), or channels within a category (in the category mode). Each sampling continues for a few seconds. Press SCAN again to cancel scanning and continue listening to the channel.

(XM®) Button

Press to select XM® Radio.

SEEK/SKIP Buttons Press next channel.

or

to previous or

178

* Not available on all models

(Power) Button

Press to turn the audio system on and off.

Preset Buttons (1-6) To store a channel: 1. Tune to the selected channel. 2. Pick a preset button and hold it

until you hear a beep.

To listen to a stored channel, select XM, then press the preset button.

Selector Knob Turn to adjust the volume. Press and turn to select channels.

SETUP Button Press to display menu items.

CR-V-31T0A600.book 179 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying the XM® Radio*

■ To Play the XM® Radio 1. Press the 2. Press the SETUP button, rotate CHANNEL. Each time you press

button to select the XM® radio band (XM1 or XM2).

to select MODE/CATEGORY or MODE , the mode switches between them. Press the

button to enter the setting.

3. Select a channel using the TUNE (

), SKIP,

, SCAN, or Preset buttons.

■ To Select a Channel from a List 1. Press 2. Rotate

to display a channel list.

to select a channel, then press

* Not available on all models

1Playing the XM® Radio*

In the channel mode, all available channels are selectable. In the category mode, you can select a channel within a category (Jazz, Rock, Classical, etc.).

You can store twelve XM® stations in the preset buttons. XM1 and XM2 let you store six stations each.

There may be instances when XM® Radio does not broadcast all the data fields (artist name, title). This does not indicate a problem with your audio system.

179

CR-V-31T0A600.book 180 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a CD

Playing a CD Your audio system supports audio CDs, CD-Rs and CD-RWs in either MP3 or WMA format. With the CD loaded, press the CD button.

SCAN Button You will get a 10-second sampling of each song. ● Press to sample all tracks on the CD (all files in the current folder in MP3 or WMA).

● Press two times to sample the first file in each of the main folders (MP3 or WMA).

● To turn off scan, press and

hold the button.

Buttons to skip to the next to skip to the

Press folder, and beginning of the previous folder in MP3 or WMA.

SEEK/SKIP Buttons Press tracks (files in MP3 or WMA).

to change

or

180

(Power) Button

Press to turn the audio system on and off.

CD Slot Insert a CD about halfway into the CD slot.

CD Button Press to play a CD.

(CD Eject) Button

Press to eject a CD.

Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

SETUP Button Press to display menu items.

CR-V-31T0A600.book 181 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ How to Select a File from a Folder with the Selector Knob

(MP3/WMA)

1. Press

to switch the display to a folder list.

Folder Selection

2. Rotate

to select a folder.

Track Selection

3. Press

to change the display to a list of

files in that folder.

4. Rotate

to select a file, then press

uuAudio System Basic OperationuPlaying a CD

1Playing a CD

NOTICE Do not use CDs with adhesive labels. The label can cause the CD to jam in the unit.

WMA files protected by digital rights management (DRM) cannot be played. The audio system displays Unsupported, then skips to the next file.

Text data appears on the display under the following circumstances: • When you select a new folder, file, or track. • When you change the audio mode to CD. • When you insert a CD.

If you eject the CD but do not remove it from the slot, the system reloads the CD automatically after several seconds.

Continued

181

CR-V-31T0A600.book 182 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a CD

■ How to Select a Play Mode You can select repeat, random, and scan modes when playing a track or file.

1. Press the SETUP button.

1How to Select a Play Mode

Press the button to go back to the previous display, and press the SETUP button to cancel this setting mode.

Play Mode Menu Items Normal Play Repeat One Track: Repeats the current track/file(s). Repeat One Folder : Repeats all files in the current folder. Random in Folder MP3/WMA current folder in random order. Random All: Plays all tracks/files in random order.

: Plays all files in the

MP3/WMA

Play Mode Items

2. Rotate

to select Play Mode, then press

3. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate 3. Rotate

to select Play Mode, then press to select Normal Play, then press

182

CR-V-31T0A600.book 183 ページ ２０１１年８月８日　月曜日　午後６時２６分

Playing an iPod® Connect the iPod® using your dock connector to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 157

uuAudio System Basic OperationuPlaying an iPod®

Album Art

Buttons to go back to the

Press previous display. Press

to set your selection.

SEEK/SKIP Buttons Press

or

to change songs.

USB Indicator Comes on when an iPod® is connected.

(Power) Button

Press to turn the audio system on and off.

AUX Button Press to select iPod® (if connected).

Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

SETUP Button Press to display menu items.

Continued

183

CR-V-31T0A600.book 184 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying an iPod®

■ How to Select a File from the iPod® Menu

1. Press

to display the iPod® menu.

1Playing an iPod®

Available operating functions vary on models or versions. Some functions may not be available on the vehicle's audio system.

If there is a problem, you may see an error message on the multi-information display.

2 iPod®/USB Flash Drive P. 206

iPod® Menu

2. Rotate

to select a menu.

3. Press 4. Rotate

to display the items on that menu.

to select an item, then press

184

CR-V-31T0A600.book 185 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ How to Select a Play Mode You can select repeat and shuffle modes when playing a file.

1. Press the SETUP button.

uuAudio System Basic Operationu

1How to Select a Play Mode Play Mode Menu Items Normal Play Shuffle Off: Turns off the shuffle mode. Shuffle: Plays all available files in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. Shuffle Albums: Plays all available albums in a selected list (playlists, artists, albums, songs, genres, or composers) in random order. Repeat Off: Turns off the repeat mode. Repeat One Track: Repeats the current track.

Play Mode Items

2. Rotate

to select Play Mode, then press

3. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate 3. Rotate

to select Play Mode, then press to select Normal Play, then press

Continued

185

CR-V-31T0A600.book 186 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying Pandora®

U.S. models iPhone® use only Playing Pandora® Activate Pandora®, and connect the iPhone® using your dock connector to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 157

Rating Icon

Album Art

(Power) Button

Press to turn the audio system on and off.

Buttons to the next

to the previous

Press station. Press station.

186

Selector Knob Press to enter PANDORA MENU. Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

AUX Button Press to select iPhone® (if connected when the Pandora® application is activated).

SKIP Button Press

to skip a song.

SETUP Button Press to display menu items.

CR-V-31T0A600.book 187 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying Pandora®

■ Pandora® Menu You can operate some of the Pandora menu items from your vehicle’s audio system. The available items are: • Station List (QuickMix is also available) • Like • Dislike • Resume/Pause • SKIP • Bookmark this song • Bookmark this artist

1Playing Pandora®

Pandora® is a personalized Internet radio service that selects music based on an artist, song, or genre a user enters, and streams what is likely to be of interest.

To use this service in your vehicle, the Pandora® app must first be installed on your iPhone®. Visit www.pandora.com. for more information.

If you cannot operate Pandora® through the audio system, it may be streaming through Bluetooth® Audio. Make sure Pandora® mode on your audio system is selected.

■ Operating a menu item

1. Press 2. Rotate 3. Press

to display the PANDORA MENU.

1Pandora® Menu

to select a menu.

to display the items on that menu.

Available operating functions vary on software versions. Some functions may not be available on the vehicle's audio system.

If there is a problem, you may see an error message on the multi-information display.

2 Pandora® P. 207

You can skip the song or select Dislike only a predetermined number of times in an hour.

187

CR-V-31T0A600.book 188 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

Playing a USB Flash Drive Your audio system reads and plays sound files on a USB flash drive in either MP3, WMA or AAC*1 format. Connect your USB flash drive to the USB adapter cable, then press the AUX button.

2 USB Adapter Cable P. 157

Buttons to skip to the next to skip to the

Press folder, and beginning of the previous folder.

SCAN Button You will get a 10-second sampling of each file. ● Press to sample all files in

the current folder.

● Press two times to sample the first file in each of the main folders.

● To turn off scan, press and

hold the button.

SEEK/SKIP Buttons Press

or

to change files.

*1:Only AAC format files recorded with iTunes® are playable on this unit.

188

USB Indicator Comes on when a USB flash drive is connected.

(Power) Button

Press to turn the audio system on and off.

Selector Knob Turn to adjust the volume. Press and turn to select an item, then press to set your selection.

AUX Button Press to select USB flash drive (if connected).

SETUP Button Press to display menu items.

CR-V-31T0A600.book 189 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

■ How to Select a File from a Folder with the Selector Knob

1. Press

to switch the display to a folder list.

Folder Selection

2. Rotate

to select a folder.

Track Selection

3. Press

to change the display to a list of

files in that folder.

4. Rotate

to select a file, then press

1Playing a USB Flash Drive

Use the recommended USB flash drives.

2 General Information on the Audio System

P. 210

Files in WMA format protected by digital rights management (DRM) are not played. The audio system displays Unplayable File, and then skips to the next file.

If there is a problem, you may see an error message on the multi-information display.

2 iPod®/USB Flash Drive P. 206

Continued

189

1How to Select a Play Mode Play Mode Menu Items Normal Play Repeat One Track: Repeats the current file. Repeat One Folder: Repeats all files in the current folder. Random in Folder: Plays all files in the current folder in random order. Random All: Plays all files in random order.

CR-V-31T0A600.book 190 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying a USB Flash Drive

■ How to Select a Play Mode You can select repeat, random, and scan modes when playing a file.

1. Press the SETUP button.

Play Mode Items

2. Rotate

to select Play Mode, then press

3. Rotate

to select a mode, then press

■ To turn off a play mode 1. Press the SETUP button. 2. Rotate 3. Rotate

to select Play Mode, then press to select Normal Play, then press

190

CR-V-31T0A600.book 191 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying Bluetooth® Audio

Models with Bluetooth®HandsFreeLink® Playing Bluetooth® Audio Your audio system allows you to listen to music from your Bluetooth®-compatible phone. This function is available when the phone is paired and linked to the vehicle's Bluetooth® HandsFreeLink® (HFL) system.

2 Phone Setup P. 221

(Power) Button

Press to turn the audio system on and off.

Preset 1 Button Press to switch the mode between pause and resume.

SEEK/SKIP Buttons Press or to change files.

Bluetooth Indicator Comes on when your phone is connected to HFL.

Selector Knob Turn to adjust the volume. Press to display the device’s name.

AUX Button Press to select Bluetooth® Audio. SETUP Button Press to display menu items.

1Playing Bluetooth® Audio

Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system. You can find an approved phone by visiting www.handsfreelink.honda.com, or by calling the HandsFreeLink® consumer support at (888) 528 - 7876. In Canada, visit www.handsfreelink.ca, or call (888) 528 -7876.

In some states, it may be illegal to perform some data device functions while driving.

If more than one phone is paired to the HFL system, there will be a delay before the system begins to play.

Continued

191

CR-V-31T0A600.book 192 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio System Basic OperationuPlaying Bluetooth® Audio

■ To Play Bluetooth® Audio Files

1. Make sure that your phone is paired and

linked to HFL.

2. Press the AUX button.

If the phone is not recognized, another HFL- compatible phone, which is not compatible for Bluetooth® Audio, may be already linked.

■ To pause or resume a file 1. Press the SETUP button. 2. Rotate Each time you press

to select Resume/Pause, then press

, the setting switches between Pause and Resume.

■ Switching to HFL

Button

Button

192

* Not available on all models

Press the (pick-up) button on the steering wheel to receive a call when Bluetooth® Audio is playing.

2 Bluetooth® HandsFreeLink®

* P. 214

Press the the call and return to Bluetooth® Audio.

(hang-up/back) button to end

1To Play Bluetooth® Audio Files

To play the audio files, you may need to operate your phone. If so, follow the phone maker's operating instructions.

The pause function may not be available on some phones.

If any audio device is connected to the auxiliary input jack, you may need to press the AUX button repeatedly to select the Bluetooth® Audio system.

Switching to another mode pauses the music playing from your phone.

1Switching to HFL

If you receive a call while Bluetooth® Audio is in the pause mode, it will resume play after ending the call.

CR-V-31T0A600.book 193 ページ ２０１１年８月８日　月曜日　午後６時２６分

Rear Entertainment System *

Optional for U.S. Allows the rear passengers to enjoy a different entertainment source, such as DVD and CD, than the front passengers.

■ Wireless Headphone The rear seat passengers can listen to audio from the rear entertainment system by a wireless headphone that comes with your vehicle.

1Rear Entertainment System *

NOTICE This vehicle’s overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.

To turn on the switch: Pivot the left earpiece outward. To adjust the volume: Turn the dial at the bottom of the right earpiece.

If you want to listen to the audio from the rear entertainment system on the speakers, press the AUX button and change to the AUX mode.

* Not available on all models

Continued

Auxiliary Input Jacks

The system also allows for auxiliary inputs from standard video games. The jacks are in the console compartment. V = Video jack L = Left audio jack R = Right audio jack

1Wireless Headphone

Wear the headphone correctly with the earpiece marked with L goes to your left ear and R goes to your right ear. Wearing the headphone backward may affect the audio reception.

193

CR-V-31T0A600.book 194 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ Overhead Screen

Overhead Screen

Pull down the screen to the first or second detent until it latches.

1Overhead Screen

NOTICE This vehicle's overhead mounted video display, if so equipped, includes mercury-containing components. Upon removal, please reuse, recycle, or dispose of as hazardous waste.

Open Button

Operating the System To operate the system, turn the ignition switch to ON (w or ACCESSORY (q. Press the REAR POWER button to turn on the system (the indicator on).

194

CR-V-31T0A600.book 195 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ Control Panel in the Console Compartment

Play/Pause Button Press to pause the CD/DVD. Press again to resume.

REAR POWER Button Press to turn the rear entertainment system on and off.

(CD/DVD Eject) Button

Press to eject a CD/DVD.

CD/DVD Slot

REAR CTRL OFF Button Press to cancel the operation from the rear seat.

SOURCE Button Press to change the source DVD or AUX. The indicator comes on for the selected source.

AUX VIDEO Jack You can connect other audio or videos.

Continued

195

CR-V-31T0A600.book 196 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ System Controls and Menus for DVD

(Power) Button

, or

Press to turn on the system. TITLE Button Press to display the status of the DVD that is currently playing. Use to highlight a menu item, and press the ENT button to make a selection. CANCEL Button Press to go back to the previous display or operation. SKIP Buttons Press or chapters.

to change

Play/Pause Button Press to pause the DVD. Press to again resume.

Rewind Button Press and hold to reverse to chapters. Stop Button Press to stop a DVD.

Fast-forward Button Press and hold to fast forward to chapters.

196

DVD Button Press to watch a DVD.

AUX Button Press to access AUX mode.

The following options appear when you play a DVD and press the MENU button. Top Menu

Menu

Play Mode

MENU Button

SETUP Button

Search

NumInput Repeat

Return

Disp Adjust

Aspect Ratio

Language

The following options appear when you play a DVD and press the SETUP button:

Audio Subtitle Angle Title Chapter

OFF Chapter Title

Brightness Contrast Black Level Tint Color Reset

Normal Wide Zoom Full

CR-V-31T0A600.book 197 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ Playing a DVD • Insert a DVD into the slot in the console compartment.

u The system automatically starts the DVD.

• To fast forward, press and hold the fast-forward button, and to rewind, press and

hold the rewind button on the remote.

1Playing a DVD

DVD is available for the rear seat passengers only.

• To go to the next chapter, press the

of the current chapter, press the button twice to go to the previous chapter.

(SKIP) button, and to go to the beginning

button on the remote. Quickly press the

■ TITLE button on the remote Press the TITLE button while the DVD is playing to see the current status of title, chapter, elapsed time, angle, subtitle, audio, and sound characteristics.

1TITLE button on the remote

Press the TITLE button again to return.

■ MENU button on the remote

Press the MENU button while the DVD is playing to see the available options. Use the

and

buttons to highlight the option and

then press the ENT button.

Continued

197

CR-V-31T0A600.book 198 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

Top Menu: