2010 Honda Accord Sedan Owners Manual

limits.

The hitch, safety chains, and any other attachments are secure.

All items in or on the trailer are properly secured and cannot shift while you drive.

2010 Accord Sedan０９／０５／１８　１９：０２：０５　３１ＴＡ５６２０　０３０４　

The lights and brakes on your vehicle and the trailer are working properly.

Your vehicle tires and spare are properly inflated, and the trailer tires and spare are inflated as recommended by the trailer maker.

Driving Safely With a Trailer The added weight, length, and height of a trailer will affect your vehicle’s handling and performance, so driving with a trailer requires some special driving skills and techniques.

For your safety and the safety of others, take time to practice driving maneuvers before heading for the open road, and follow the guidelines in this section.

TowingSpeedsandGears Drive slower than normal in all driving situations, and obey posted speed limits for vehicles with trailers. If you have an automatic transmission, use the D position when towing a trailer on level roads. D3 is the proper shift lever position to use when towing a trailer in hilly terrain. (See ‘‘ DrivingonHills next column for additional gear information.)

’’ in the

Towing a Trailer

MakingTurnsandBraking Make turns more slowly and wider than normal. The trailer tracks a smaller arc than your vehicle, and it can hit or run over something the vehicle misses. Allow more time and distance for braking. Do not brake or turn suddenly as this could cause the trailer to jackknife or turn over.

DrivingonHills When climbing hills, closely watch your temperature gauge. If it nears the red (Hot) mark, turn the air conditioning off, reduce speed and, if necessary, pull to the side of the road to let the engine cool.

If the automatic transmission shifts frequently while going up a hill, shift to D3.

CONTINUED

299

2010 Accord SedanTowing Your Vehicle Your vehicle is not designed to be towed behind a motor home. If your vehicle needs to be towed in an emergency, see page

375

０９／０５／１８　１９：０２：１６　３１ＴＡ５６２０　０３０５　

BackingUp Always drive slowly and have someone guide you when backing up. Grip the of the steering wheel, then turn the wheel to the left to get the trailer to move to the left. Turn the wheel to the right to move the trailer to the right.

bottom

Parking Follow all normal precautions when parking, including firmly setting the parking brake and putting the transmission in Park (automatic) or in 1st or reverse (manual). Also, place wheel chocks at each of the trailer’s tires.

Towing a Trailer

When driving down hills, reduce your speed, and shift down to second gear. Do not ‘‘ride’’ the brakes, and remember, it will take longer to slow down and stop when towing a trailer.

If you must stop when facing uphill, use the foot brake or parking brake. Do not try to hold the vehicle in place by pressing on the accelerator, as this can cause the automatic transmission to overheat.

HandlingCrosswindsandBuffeting Crosswinds and air turbulence caused by passing trucks can disrupt your steering and cause the trailer to sway. When being passed by a large vehicle, keep a constant speed, and steer straight ahead. Do not try to make quick steering or braking corrections.

300

2010 Accord Sedan０９／０５／１８　１９：０２：２２　３１ＴＡ５６２０　０３０６　

Maintenance

This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.

This section also includes instructions on how to read the maintenance minder messages on the information display, and instructions for simple maintenance tasks you may want to take care of yourself.

If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.

399

Maintenance Safety Maintenance Minder Fluid Locations Adding Engine Oil Changing the Engine Oil and

...................... .................... .............................. ........................

Filter

Brake Fluid Clutch Fluid

Engine Coolant Windshield Washers Transmission Fluid

Automatic Transmission Manual Transmission Brake and Clutch Fluid

........................................... .............................. .................... ....................... .......... .............. ................ ................................ ............................... .................... .................................... ............................................. ................ ..................................... .................. ................................. ............................................... ................... .............................

Power Steering Fluid Timing Belt Lights Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the Battery Vehicle Storage

. 302
. 303
. 310
. 312

. 314
. 316
. 318
. 319
. 319
. 321
. 322
. 322
. 323
. 323
. 324
. 325
. 334
. 334
. 335
. 336
. 339
. 347
. 348

301

2010 Accord Sedan09/07/08 21:41:48 31TA5620_307

Maintenance Safety

All service items not detailed in this section should be performed by a certified technician or other qualified mechanic.

Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.

Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.

To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.

To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.

Wear eye protection and protective clothing when working with the battery or compressed air.

302

Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.

Potential Vehicle Hazards Carbon Monoxide poison from engine exhaust. there is adequate ventilation whenever you operate the engine.

Be sure

Burns from hot parts. Let the engine and exhaust system cool down before touching any parts.

Injury from moving parts. not run the engine unless instructed to do so.

Do

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner’s manual.

Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

2010 Accord Sedan０９／０５／１８　１９：０２：４７　３１ＴＡ５６２０　０３０８　

Your vehicle displays engine oil life and maintenance service items on the information display to show you when you should have your dealer do engine oil replacement and indicated maintenance service.

Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.

Maintenance Minder

Engine Oil Life Display

SELECT/RESET KNOB

The remaining engine oil life is shown on the display according to this table:

Calculated Engine

Displayed

ENGINE OIL LIFE INDICATOR

U.S. model is shown.

To see the current engine oil life, turn the ignition switch to the ON (II) position, then press and release the select/reset knob repeatedly until the engine oil life indicator appears (see page

64

).

Oil Life (%) 91 % 100 % 81 % 90 % 71 % 80 % 61 % 70 % 60 % 51 % 41 % 50 % 31 % 40 % 21 % 30 % 16 % 20 % 15 % 11 % 6 % 10 % 5 % 1 %

− − − − − − − − − − − − 0 %

Engine Oil Life (%)

100 % 90 % 80 % 70 % 60 % 50 % 40 % 30 % 20 % 15 % 10 % 5 % 0 %

CONTINUED

303

2010 Accord Sedan０９／０５／１８　１９：０２：５５　３１ＴＡ５６２０　０３０９　

Maintenance Minder

MAINTENANCE MINDER INDICATOR

ENGINE OIL LIFE INDICATOR

MAINTENANCE ITEM CODE(S) U.S. model is shown.

If the remaining engine oil life is 15
to 6 percent, you will see the engine oil life indicator every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator will also come on, and the maintenance item code(s) for other scheduled maintenance items needing service will be displayed next to the engine oil life indicator.

304

The 15 and 10 percent oil life indicators remind you that your vehicle will soon be due for scheduled maintenance.

When the remaining engine oil life is 5 to 1 percent, you will see a ‘‘SERVICE’’ message along with the same maintenance item code(s), every time you turn the ignition switch to the ON (II) position.

2010 Accord Sedan０９／０５／１８　１９：０３：０７　３１ＴＡ５６２０　０３１０　

Maintenance Minder

The maintenance item code or codes indicate the main and sub items required at the time of the oil change (see page

309

).

You can switch the information display from the engine oil life display to the odometer or the trip meter. Press and release the select/ reset knob on the instrument panel.

When the engine oil life is 15 to 1
percent, the maintenance minder indicator ( ) comes on every time you turn the ignition switch to the ON (II) position, then it goes out if you switch the information display.

When you see this message, have the indicated maintenance performed by your dealer as soon as possible.

When the remaining engine oil life is 0 percent, the engine oil life indicator will blink. The display comes on every time you turn the ignition switch to the ON (II) position. The maintenance minder indicator on in the instrument panel. When you see this message, immediately have the indicated maintenance done by your dealer.

) also comes on and remains

NEGATIVE DISTANCE TRAVELED

If you do not perform the indicated maintenance, negative distance traveled is displayed and begins to blink after the vehicle has been driven 10 miles (10 km) or more.

Negative distance traveled means your vehicle has passed the maintenance required point. Immediately have the indicated maintenance done by your dealer.

CONTINUED

305

2010 Accord Sedan０９／０５／１８　１９：０３：１８　３１ＴＡ５６２０　０３１１　

Maintenance Minder

To change the information display from the engine oil life display to the odometer or the trip meter, press and release the select/reset knob.

Maintenance Main Items and Sub Items

MAINTENANCE MINDER INDICATOR

MAINTENANCE MAIN ITEM

When the engine oil life is 0 percent or negative distance traveled, the maintenance minder indicator ) remains on even if you change the information display.

Immediately have the service performed, and make sure to reset the display as described as follows.

MAINTENANCE SUB ITEM(S)

U.S. model is shown.

All maintenance items displayed on the information display are in code. For an explanation of these maintenance codes, see page

309

Resetting the Engine Oil Life Display Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the information display the next time you turn the ignition switch to the ON (II) position.

If maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:

1.

Turn the ignition switch to the ON (II) position.

2.

Press the select/reset knob repeatedly until the engine oil life indicator is displayed.

306

2010 Accord Sedan０９／０５／１８　１９：０３：２８　３１ＴＡ５６２０　０３１２　

3.

Press the select/reset knob for about 10 seconds. The engine oil life and the maintenance item code(s) will blink.

4.

Press the select/reset knob for another 5 seconds. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’

Maintenance Minder

Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.

Your authorized Honda dealer knows your vehicle best and can provide competent, efficient service.

CONTINUED

307

2010 Accord Sedan０９／０５／１８　１９：０３：４０　３１ＴＡ５６２０　０３１３　

Maintenance Minder

However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log. Check your warranty booklet for more information.

We recommend using Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high quality standards as the original components, so you can be confident of their performance and durability.

308

U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.

＃

According to state and federal regulations, failure to perform maintenance on the items marked with will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the information display.

Owner’s Maintenance Checks You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.

Engine oil level time you fill the fuel tank. See page

Check every

262

−

Engine coolant level radiator reserve tank every time you fill the fuel tank. See page

Check the

−

263

Automatic transmission Check the fluid level monthly. See page 319

−

Brakes monthly. See page

−

Check the fluid level

322

−

Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 339

−

Check the operation of

Lights the headlights, parking lights, taillights, high-mount brake light, and license plate lights monthly. See page

325

2010 Accord Sedan０９／０５／１８　１９：０３：５０　３１ＴＡ５６２０　０３１４　

Maintenance Minder

Symbol

Maintenance Main Items

Replace engine oil ＊ Replace engine oil and oil filter ＊ Inspect front and rear brakes Check parking brake adjustment Inspect these items:

Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS/VSA) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections ＃

＊

1 :

If the message ‘‘SERVICE’’ does not appear more than 12 months after the display is reset, change the engine oil every year.

＃

See information on maintenance and emissions warranty in the center column on page

308

NOTE:

Independent of the maintenance messages in the information display, replace the brake fluid every 3 years.

Inspect idle speed every 160,000 miles (256,000 km).

Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.

Symbol

Maintenance Sub Items

Rotate tires Replace air cleaner element

If you drive in dusty conditions, replace every 15,000
miles (24,000 km).

Replace dust and pollen filter

If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000 miles (24,000 km).

Inspect drive belt Replace transmission fluid Replace spark plugs Replace timing belt and inspect water pump (V6 engine only)

If you drive regularly in very high temperatures (over 110°F, 43°C), or in very low temperatures (under − (Canada).

29°C), replace every 60,000 miles (U.S.)/100,000 km

−

20°F,

Inspect valve clearance Replace engine coolant

309

2010 Accord Sedan０９／０５／１８　１９：０３：５４　３１ＴＡ５６２０　０３１５　

Fluid Locations

4-cylinder models

BRAKE FLUID (Black cap)

ENGINE OIL DIPSTICK (Orange handle)

POWER STEERING FLUID (Red cap)

WASHER FLUID (Blue cap)

ENGINE COOLANT RESERVOIR

RADIATOR CAP

310

CLUTCH FLUID (Manual Transmission only) (Light gray cap)

ENGINE OIL FILL CAP

AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)

2010 Accord Sedan０９／０５／１８　１９：０４：００　３１ＴＡ５６２０　０３１６　

V6 models

ENGINE OIL DIPSTICK (Orange loop)

ENGINE OIL FILL CAP

POWER STEERING FLUID (Red cap)

WASHER FLUID (Blue cap)

ENGINE COOLANT RESERVOIR

Fluid Locations

BRAKE FLUID (Black cap)

AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)

RADIATOR CAP

311

2010 Accord Sedan０９／０５／１８　１９：０４：０７　３１ＴＡ５６２０　０３１７　

Adding Engine Oil

ENGINE OIL FILL CAP

ENGINE OIL FILL CAP

4-cylinder models

V6 models

Unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.

Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick. Do not fill above the upper mark; you could damage the engine.

312

Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 5W-20
detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements.

2010 Accord Sedan０９／０５／１８　１９：０４：１７　３１ＴＡ５６２０　０３１８　

Honda Motor Oil is the preferred 5W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines.’’

The oil viscosity or weight is provided on the container’s label. 5W-20 oil is formulated for year- round protection of your vehicle to improve cold weather starting and fuel economy.

API CERTIFICATION SEAL

Ambient Temperature

Adding Engine Oil

Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal, and it is the proper weight. You must follow the oil and filter change intervals shown on the information display.

Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.

313

2010 Accord Sedan０９／０５／１８　１９：０４：２８　３１ＴＡ５６２０　０３１９　

Changing the Engine Oil and Filter

WASHER

WASHER

4-cylinder models

OIL DRAIN BOLT

2.

Open the hood, and remove the engine oil fill cap. Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.

V6 models

OIL DRAIN BOLT

3.

Remove the oil filter and let the remaining oil drain. A special wrench (available from your dealer) is required.

Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter.

Always change the oil and filter according to the maintenance messages shown on the information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.

Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled technician.

1.

Run the engine until it reaches normal operating temperature, then shut it off.

314

2010 Accord Sedan０９／０５／１８　１９：０４：４１　３１ＴＡ５６２０　０３２０　

OIL FILTER

OIL FILTER

4-cylinder models

V6 models

4.

Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the contacting surface of a new oil filter.

5.

Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to: 29 lbf·ft (39 N·m , 4.0 kgf·m)

6.

Refill the engine with the recom- mended oil.

Engine oil change capacity (including filter):

4-cylindermodels 4.2 US qt (4.0 )

V6models 4.5 US qt (4.3 )

Changing the Engine Oil and Filter

7.

8.

9.

Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine, and check your work.

Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.

Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.

Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.

315

2010 Accord Sedan０９／０５／１８　１９：０４：４９　３１ＴＡ５６２０　０３２１　

Engine Coolant

Adding Engine Coolant

4-cylinder models

RESERVE TANK

V6 models

RESERVE TANK

If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to the MAX line. Inspect the cooling system for leaks.

Always use Honda Long-life Anti- freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.

316

If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

4-cylindermodelsonly

If you regularly drive your vehicle under severe conditions in very low 35°C), a temperature (under higher concentration of coolant should be used. Consult your Honda dealer f or more inf ormation on the proper coolant.

31°F,

−

−

2010 Accord Sedan09/07/08 21:41:58 31TA5620_322

If the reserve tank is completely empty, you should also check the coolant level in the radiator.

RADIATOR CAP

Engine Coolant

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.

1.

Make sure the engine and radiator are cool.

2.

Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down.

3.

Remove the radiator cap by pushing it down and turning it counterclockwise.

4-cylinder models

V6 models

RADIATOR CAP

4.

The coolant level should be up to the base of the filler neck. Add coolant if it is low.

Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.

5.

Put the radiator cap back on, and tighten it fully.

6.

Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank.

Do not add any rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or engine components.

317

2010 Accord Sedan０９／０５／１８　１９：０５：１３　３１ＴＡ５６２０　０３２３　

Windshield Washers

LEVEL GAUGE

LEVEL GAUGE

4-cylinder models

V6 models

Check the level in the windshield washer reservoir at least monthly during normal use.

Check the fluid level by removing the cap and looking at the level gauge.

Canadianmodelsonly The washer level indicator will come on when the level is low (see page 62

).

Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.

When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition the blade edges.

318

Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.

2010 Accord Sedan０９／０５／１８　１９：０５：２３　３１ＴＡ５６２０　０３２４　

Automatic Transmission

DIPSTICK

DIPSTICK

Transmission Fluid

UPPER MARK LOWER MARK

4-cylinder models

V6 models

4-cylinder models

2.

Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth.

3.

Insert the dipstick all the way into the transmission securely as shown in the illustration.

Check the fluid level with the engine at normal operating temperature.

1.

Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine. For accurate results, wait about 60 seconds (but no longer than 90 seconds) before doing step 2.

CONTINUED

319

2010 Accord Sedan０９／０５／１８　１９：０５：３６　３１ＴＡ５６２０　０３２５　

Transmission Fluid

Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.

Always use Honda Genuine ATF-Z1 (automatic transmission fluid).

6.

Insert the dipstick all the way back into the transmission securely as shown in the illustration.

The transmission should be drained and refilled with new fluid according to the maintenance minder (see page 303

).

If you are not sure how to add fluid, contact your dealer.

Use only Honda Genuine ATF-Z1
(automatic transmission f luid). Do not mix with other transmission f luids. Using transmission f luid other than Honda Genuine ATF-Z1 may cause deterioration in transmission operation and durability, and could result in damage to the transmission. Damage resulting f rom the use of transmission f luid other than Honda Genuine ATF-Z1 is not covered by the Honda new vehicle warranty.

UPPER MARK

LOWER MARK

V6 models

4.

5.

Remove the dipstick and check the fluid level. It should be between the upper and lower marks.

If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks.

320

2010 Accord Sedan０９／０５／１８　１９：０５：４９　３１ＴＡ５６２０　０３２６　

Manual Transmission

FILLER BOLT

CLIP

UNDER COVER

Correct level

4-cylindermodels Check the fluid level with the transmission at normal operating temperature and the vehicle sitting on level ground.

To check the transmission fluid level, remove the under cover holding clips with a flat-tip screwdriver, then remove the under cover carefully.

Remove the transmission filler bolt, and carefully feel inside the bolt hole with your finger.

The fluid level should be up to the edge of the bolt hole. If it is not, add Honda Manual Transmission Fluid (MTF) until it starts to run out of the hole. Reinstall the filler bolt, and tighten it securely.

Transmission Fluid

Reinstall the under cover and put the holding clips back in place. Make sure the under cover is installed under the edge of the front bumper.

If Honda MTF is not available, you may use an SAE 10W-30 or 10W-40
viscosity motor oil with the API Certification Seal that says ‘‘FOR GASOLINE ENGINES’’ as a temporary replacement. However, motor oil does not contain the proper additives, and continued use can cause stiffer shifting. Replace as soon as it is convenient.

The transmission should be drained and refilled with new fluid according to the maintenance minder (see page 303

).

If you are not sure how to check and add fluid, contact your dealer.

321

2010 Accord Sedan０９／０５／１８　１９：０５：５９　３１ＴＡ５６２０　０３２７　

Brake and Clutch Fluid

Check the fluid level in the reservoirs monthly. There are up to two reservoirs, depending on the model. They are:

Brake fluid reservoir (all models) Clutch fluid reservoir (manual transmission only)

Independent of the maintenance minder display, replace the brake fluid every 3 years.

322

Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3
or DOT 4 fluid, from a sealed container, as a temporary replacement.

Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.

Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.

Brake Fluid

MAX

MIN

The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.

2010 Accord Sedan０９／０５／１８　１９：０６：０８　３１ＴＡ５６２０　０３２８　

Brake and Clutch Fluid, Power Steering Fluid

Clutch Fluid Onmodelswithmanualtransmission

MAX

A low fluid level can indicate a leak in the clutch system. Have this system inspected as soon as possible.

Power Steering Fluid

UPPER LEVEL

MIN

The fluid level should be between the MIN and MAX marks on the side of the reservoir. If it is not, add brake fluid to bring it up to that level. Use the same fluid specified for the brake system.

4-cylinder models

LOWER LEVEL

Check the level on the side of the reservoir when the engine is cold. The fluid should be between the UPPER LEVEL and LOWER LEVEL. If not, add power steering fluid to the UPPER LEVEL.

CONTINUED

323

2010 Accord Sedan０９／０５／１８　１９：０６：１９　３１ＴＡ５６２０　０３２９　

Power Steering Fluid, Timing Belt

Always use Honda Power Steering Fluid. You may use another power steering fluid as an emergency replacement, but have the power steering system flushed and refilled with Honda PSF as soon as possible.

A low power steering fluid level can indicate a leak in the system. Check the fluid level frequently, and have the system inspected as soon as possible.

Turning the steering wheel to f ull lef t or right lock and holding it there can damage the power steering pump.

UPPER LEVEL

LOWER LEVEL

V6 models Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; it could damage components in the engine compartment.

324

Timing Belt V6models The timing belt should be replaced according to the maintenance minder (see page

303

).

Replace the timing belt every 60,000
miles (U.S.) or every 100,000 km (Canada) if you regularly drive your vehicle in any of the following conditions:

In very high temperatures (over 110°F, 43°C). In very low temperatures (under 29°C). If you frequently tow a trailer.

20°F,

−

−

2010 Accord Sedan０９／０５／１８　１９：０６：２９　３１ＴＡ５６２０　０３３０　

Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustments should be done by your dealer or another qualified technician.

Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

Lights

HighBeamHeadlight

Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

4-cylinder models

1.

Open the hood.

STAY

To change a bulb on the passenger’s side, remove the engine coolant reserve tank by pulling it out of its stay.

CONTINUED

325

2010 Accord Sedan０９／０５／１８　１９：０６：３８　３１ＴＡ５６２０　０３３１　

Lights

FASTENER

AIR INTAKE COVER

BULB

V6 models

STAY

V6 models

DUCT

TAB

V6models To change a bulb on the driver’s side, undo the fastener and remove the air intake cover and duct.

2.

Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb.

3.

Remove the bulb by turning it approximately one-quarter turn counterclockwise.

326

2010 Accord Sedan０９／０５／１８　１９：０６：５２　３１ＴＡ５６２０　０３３２　

4.

Install the new bulb, and turn it one-quarter turn clockwise to lock it in place.

5.

Push the electrical connector onto the bulb.

6.

Turn on the headlights to test the new bulb.

7.

Driver’ssideonV6models Reinstall the air intake cover and duct securely. Reinstall the fastener and secure it by pushing on the head until it locks.

Passenger’sside Reinstall the engine coolant reserve tank.

LowBeamHeadlight

HOLDING CLIPS

BULB

Lights

TAB

1.

To change the passenger’s side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. To change the driver’s side bulb, turn the steering wheel to the right.

2.

Use a flat-tip screwdriver to remove the two holding clips from the inner fender.

3.

Pull the inner fender cover away from the fender and bumper.

4.

5.

Remove the bulb by turning it approximately one-quarter turn counterclockwise.

Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb.

CONTINUED

327

2010 Accord Sedan０９／０５／１８　１９：０７：０４　３１ＴＡ５６２０　０３３３　

Lights

6.

Install the new bulb, and turn it one-quarter turn clockwise to lock it in place.

7.

Push the electrical connector onto the bulb.

8.

Turn on the headlights to test the new bulb.

9.

Put the inner fender cover in place. Install the two holding clips. Lock each one in place by pushing on the center.

328

Replacing a Front Turn Signal/ Parking Light Bulb

V6 model is shown.

STAY

1.

Open the hood.

To change the turn signal bulb on the passenger’s side, remove the engine coolant reserve tank by pulling it out of its stay.

BULB

2.

3.

Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.

To remove the burned out bulb, push it in and turn it counterclockwise until it unlocks.

2010 Accord Sedan０９／０５／１８　１９：０７：１８　３１ＴＡ５６２０　０３３４　

Lights

4.

Install the new bulb and turn it clockwise to lock it in place.

Replacing a Front Side Marker Light Bulb

HOLDING CLIPS

BULB

5.

Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.

6.

Turn on the lights to make sure the new bulb is working.

7.

Passenger’sside Reinstall the coolant reserve tank.

1.

To change the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, then turn off the engine. To change the bulb on the passenger’s side, turn the steering wheel to the left.

3.

4.

2.

Use a flat-tip screwdriver to remove the two holding clips from the inner fender.

Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.

Pull the burned out bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.

CONTINUED

329

2010 Accord Sedan０９／０５／１８　１９：０７：３２　３１ＴＡ５６２０　０３３５　

Lights

5.

Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.

6.

Turn on the lights to make sure the new bulb is working.

7.

Reinstall the inner fender cover. Then reinstall the holding clips, and lock them in place by pushing on their centers.

330

Replacing Rear Bulbs

BULB

SOCKET

SCREW

1.

Open the trunk.

Remove the screw in the center of the fastener on the side of the trunk lining. Pull the lining back.

2.

Determine which of the three bulbs is burned out: stop/taillight, back-up light or turn signal light.

3.

Remove the socket by turning it one-quarter turn counterclockwise.

4.

5.

Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.

Insert the socket back into the light assembly. Turn it clockwise to lock it in place.

2010 Accord Sedan０９／０５／１８　１９：０７：４２　３１ＴＡ５６２０　０３３６　

6.

Turn on the lights to make sure the new bulb is working.

Replacing a High-mount Brake Light Bulb

7.

Push the trunk lid trim back into position.

8.

Put the fastener into the hole on the side of the trunk lining. Reinstall the screw.

BULB

Lights

3.

Reinstall the socket. Turn it clockwise until it locks. Make sure the new bulb is working.

Rear License Plate Light Bulbs The license plate has two lights above it. The bulbs should be replaced by your dealer.

SOCKET

1.

Open the trunk, and remove the socket from the light assembly by turning it one-quarter turn counter- clockwise.

2.

Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.

331

2010 Accord Sedan０９／０５／１８　１９：０７：５３　３１ＴＡ５６２０　０３３７　

Lights

Replacing a Fog Light Bulb Ifequipped Your vehicle uses halogen light bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

Halogen light bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights were properly aimed when your vehicle was new. If you regularly carry heavy items in the trunk or pull a trailer, readjustment may be required. Adjustment should be done by your dealer or another qualified technician.

332

FASTENERS

ELECTRICAL CONNECTOR

TAB

1.

Passenger’sside Remove the three fasteners with a flat-tip screwdriver.

Pull down the under cover from the bumper carefully.

2.

Remove the electrical connector from the bulb by pushing on the tab to unlock it, then slide the connector off the bulb.

3.

Remove the bulb by turning it about one-quarter turn counterclockwise.

2010 Accord Sedan０９／０５／１８　１９：０８：０６　３１ＴＡ５６２０　０３３８　

HOLDING CLIPS

4.

Driver’sside To change the bulb, start the engine, turn the steering wheel all the way to the right, then turn off the engine.

5.

Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back.

TAB

ELECTRICAL CONNECTOR

6.

Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.

7.

Remove the bulb from the fog light assembly by turning it one- quarter turn counterclockwise.

Lights

8.

9.

Insert the new bulb into the hole, and turn it one-quarter turn clockwise to lock it in place.

Push the electrical connector back onto the bulb. Make sure it is on all the way.

10.

Turn on the fog lights to test the new bulb.

11.

Passenger’sside Reinstall the under cover and put the three fasteners back in place.

Driver’sside Reinstall the inner fender. Make sure it is installed under the edge of the front bumper.

Reinstall the holding clips, and push in the head of each clip.

333

2010 Accord Sedan０９／０５／１８　１９：０８：１５　３１ＴＡ５６２０　０３３９　

Cleaning the Seat Belts, Floor Mats

Cleaning the Seat Belts

OPENING

Dirt build-up around the openings of the seat belt anchors can cause the belts to retract slowly. Wipe the openings with a clean cloth dampened in mild soap and warm water or isopropyl alcohol.

Floor Mats

If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air-dry before you use the vehicle.

334

The driver’s floor mat that came with your vehicle hooks over the floor mat anchors. This keeps the floor mat from sliding forward and possibly interfering with the pedals.

2010 Accord Sedan０９／０５／１８　１９：０８：２２　３１ＴＡ５６２０　０３４０　

Floor Mats, Dust and Pollen Filter

If you remove a floor mat, make sure to re-anchor it when you put it back in your vehicle.

If you use a non-Honda floor mat, make sure it fits properly and that it can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mat.

Make sure the rear floor mats are properly positioned. If not, the floor mat will interfere with the seat operation and make the front passenger’s weight sensors ineffective.

Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the heating and cooling system/climate control system.

Have your dealer replace this filter when this service is indicated by a maintenance message on the information display. It should be