Download PDF Manual

. Seeks the next station.


15. © SEEK


. Seeks the previous station.


16. BAND


. Press to scroll through the available bands FM1, FM2, AM, or SiriusXM if equipped.


17. H (Clock)


. Press to set the clock


and date.


Operation


Using the Radio O (Power/Volume) : Press to turn the system on and off. Turn clockwise or counterclockwise to increase or decrease the volume. 4 (Information) : Press to switch the display between the radio station frequency and the time. While the ignition is off, press this button to display the time. Press to display additional text information related to the current FM-RDS station or MP3 song. A choice of additional information such as Channel, Song, Artist, and CAT (category) can display. Continue pressing to highlight the desired tab,


or press the softkey located under any one of the tabs and the information about that tab displays. Speed Compensated Volume (SCV) : Radios with SCV automatically adjust the radio volume to compensate for road and wind noise as the vehicle speed changes while driving, so that the volume level stays consistent. To activate SCV: 1. Set the radio volume to the


desired level.


2. Press the MENU button to


display the radio setup menu.


3. Press the softkey under the


AUTO VOLUM (automatic volume) tab on the radio display.


4. Press the softkey under the


desired Speed Compensated Volume setting (OFF, Low, Med, or High) to select the level of radio volume compensation. The display times out after approximately 10 seconds. Each higher


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


setting allows for more radio volume compensation at faster vehicle speeds.


Setting the Tone (Bass/Treble) To adjust the bass or treble: 1. Press the f knob until Bass or


Treble displays.


2. To adjust the setting, do one of


the following: . Turn the f knob. . Press either ¨ SEEK,


or © SEEK.


EQ (Equalization) : Press this button to choose bass and treble equalization settings designed for different types of music. Selecting MANUAL, or changing bass or treble, returns the EQ to the manual bass and treble settings. Unique EQ settings can be saved for each source.


Adjusting the Speakers (Balance/Fade) BAL/FADE (Balance/Fade) : To adjust the balance or fade: 1. Press the f knob until the


speaker control tabs display. 2. Highlight the desired speaker


control tab by doing one of the following: . Press the f knob. . Press the softkey under the


desired tab.


3. Adjust the setting by doing one


of the following: . Turn the f knob clockwise


or counterclockwise.


. Press ¨ SEEK or © SEEK. . Press \ FWD or s REV.


To quickly adjust all speaker and tone controls to the middle position, press the f knob for more than two seconds.


Infotainment System


135


If the Rear Seat Audio (RSA) is turned on, the radio disables FADE and mutes the rear speakers. Radio Messages Calibration Error : The audio system has been calibrated for the vehicle from the factory. If Calibration Error displays, it means that the radio has not been configured properly for the vehicle and it must be returned to your dealer for service. VIN or NO VIN : One of these messages will display when the TheftLock system has locked up the radio. Take the vehicle to your dealer for service. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


136


Infotainment System


Radio


AM-FM Radio


Radio Data System (RDS) The radio may have an RDS. The RDS feature is available for use only on FM stations that broadcast RDS information. This system relies upon receiving specific information from these stations and only works when the information is available. While the radio is tuned to an FM-RDS station, the station name or call letters display. In rare cases, a radio station could broadcast incorrect information that causes the radio features to work improperly. If this happens, contact the radio station. Finding a Station BAND or SRCE : Press to switch between FM1, FM2, and AM. The selection displays. f (Tune) : Turn clockwise or counterclockwise to increase or decrease the station frequency.


© SEEK or ¨ SEEK : Press © SEEK to go to the previous or ¨ SEEK to go to the next station and stay there. To scan stations, press and hold either button for two seconds until a beep sounds. The radio goes to a station, plays for a few seconds, then goes to the next station. For AM-FM Radio and Radio with CD, the station frequency flashes while the radio is in the scan mode. Press either button again to stop scanning. The radio seeks and scans stations only with a strong signal that are in the selected band. Scan presets within the current selected band by pressing and holding either SEEK button for four seconds until a double beep sounds. The radio goes to a stored preset, plays for a few seconds if a strong signal is present, then goes to the next stored preset. The station frequency flashes while the radio is in the scan mode.


Storing a Radio Station as a Favorite You are encouraged to set up radio station favorites while the vehicle is parked. Tune to favorite stations using the presets, favorites button, and steering wheel controls, if equipped. See Defensive Driving 0 164. FAV (Favorites) : If the vehicle has a FAV button, a maximum of 36 stations can be programmed as favorites using the six softkeys below the radio station frequency tabs and by using the radio favorites page button (FAV button). Press the FAV button to go through up to six pages of favorites, each having six favorite stations available per page. Each page of favorites can contain any combination of AM and FM stations. The balance/fade and tone settings that were previously adjusted, are stored with the favorite stations. To store a station as a favorite: 1. Tune to the desired radio


station.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


2. Press the FAV button to display the page where the station is to be stored.


the process of programming favorites for the chosen number of numbered pages.


3. Press and hold one of the


six softkeys until a beep sounds. When that softkey is pressed and released, the station that was set, returns.


4. Repeat the steps for each softkey radio station to be stored as a favorite.


The number of favorites pages can be set up using the MENU button. To set up the number of favorites pages: 1. Press the MENU button to


display the radio setup menu.


2. Press the softkey below the


FAV 1-6 tab.


3. Select the desired number of


favorites pages by pressing the softkey below the displayed page numbers.


4. Press the FAV button, or let the menu time out, to return to the original main radio screen showing the radio station frequency tabs and to begin


Satellite Radio SiriusXM®, if equipped, is a satellite radio service based in the United States and Canada only. Finding a Category (CAT) Station CAT (Category) : The CAT button is used to find XM channels (if equipped) while the radio is in the XM mode. Finding a Channel BAND or SRCE : Press to switch between FM1, FM2, AM, and XM. The selection displays. f (Tune) : Turn clockwise or counterclockwise to increase or decrease the station frequency. © SEEK or ¨ SEEK : Press © SEEK to go to the previous or ¨ SEEK to go to the next station and stay there.


Infotainment System


137


To scan stations, press and hold either button for two seconds until a beep sounds. The radio goes to a station, plays for a few seconds, then goes to the next station. The station frequency flashes while the radio is in the scan mode. Press either button again to stop scanning. The radio seeks and scans stations only with a strong signal that are in the selected band. To scan presets within the current selected band by pressing and holding either SEEK button for four seconds until a double beep sounds. The radio goes to a stored preset, plays for a few seconds if a strong signal is present, then goes to the next stored preset. The station frequency flashes while the radio is in the scan mode. Storing a Radio Station as a Favorite Drivers are encouraged to set up radio station favorites while the vehicle is parked. Tune to favorite stations using the presets, favorites


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


138


Infotainment System


button, and steering wheel controls, if the vehicle has this feature. See Defensive Driving 0 164. FAV (Favorites) : If the vehicle has a FAV button, a maximum of 36 stations can be programmed as favorites using the six softkeys below the radio station frequency tabs and by using the radio favorites page button (FAV button). Press the FAV button to go through up to six pages of favorites, each having six favorite stations available per page. Each page of favorites can contain any combination of AM and FM stations. The balance/fade and tone settings that were previously adjusted, are stored with the favorite stations. To store a station as a favorite: 1. Tune to the desired radio


station.


2. Press the FAV button to display the page where the station is to be stored.


3. Press and hold one of the


six softkeys until a beep sounds. When that softkey is pressed and released, the station that was set, returns.


4. Repeat the steps for each softkey radio station to be stored as a favorite.


The number of favorites pages can be set up using the MENU button. To set up the number of favorites pages: 1. Press the MENU button to


display the radio setup menu.


2. Press the softkey below the


FAV 1-6 tab.


3. Select the desired number of


favorites pages by pressing the softkey below the displayed page numbers.


4. Press the FAV button, or let the menu time out, to return to the original main radio screen showing the radio station frequency tabs and to begin the process of programming favorites for the chosen number of numbered pages.


Radio Reception Frequency interference and static can occur during normal radio reception if items such as cell phone chargers, vehicle convenience accessories, and external electronic devices are plugged into the accessory power outlet. If there is interference or static, unplug the item from the accessory power outlet. AM The range for most AM stations is greater than for FM, especially at night. The longer range can cause station frequencies to interfere with each other. For better radio reception, most AM radio stations boost the power levels during the day, and then reduce these levels during the night. Static can also occur when things like storms and power lines interfere with radio reception. When this happens, try reducing the treble on the radio.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


FM Stereo FM stereo gives the best sound, but FM signals reach only about 16 to 65 km (10 to 40 mi). Tall buildings or hills can interfere with FM signals, causing the sound to fade in and out. Cellular Phone Usage Cellular phone usage may cause interference with the radio. This interference may occur when making or receiving phone calls, charging the phone's battery, or simply having the phone on. This interference causes an increased level of static while listening to the radio. If static is received while listening to the radio, unplug the cellular phone and turn it off.


Fixed Mast Antenna The fixed mast antenna can withstand most car washes without being damaged as long as it is securely attached to the base. If the mast becomes slightly bent, straighten it out by hand. If the mast is badly bent, replace it. Make sure there is sufficient clearance when entering garages or parking structures. Occasionally check to make sure the antenna is tightened to its base. If tightening is required, tighten by hand.


Infotainment System


139


Audio Players


CD Player


Care of the CD Player Do not add any label to a CD. It could get caught in the CD. If a CD is recorded on a personal computer and a description label is needed, try labeling the top of the recorded CD with a marking pen. The use of CD lens cleaners is not advised, due to the risk of contaminating the lens of the CD optics with lubricants internal to the CD player mechanism.


Caution


If a label is added to a CD, more than one CD is inserted into the slot at a time, or an attempt is made to play scratched or damaged CDs, the CD player could be damaged. While using the CD player, use only CDs in good condition without any label,


(Continued)


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


140


Infotainment System


Caution (Continued)


load one CD at a time, and keep the CD player and the loading slot free of foreign materials, liquids, and debris.


If an error displays, see “CD Player Messages” later in this section. Care of CDs If playing a CD-R, the sound quality can be reduced due to CD-R or CD-RW quality, the method of recording, the quality of the music that has been recorded, and the way the CD-R or CD-RW has been handled. Handle them carefully. Store CD-Rs or CD-RWs in their original cases or other protective cases and away from direct sunlight and dust. The CD player scans the bottom surface of the disc. If the surface of a CD is damaged, such as cracked, broken, or scratched, the CD does not play properly or not at all. Do not touch the bottom side of a CD while handling it; this could


damage the surface. Pick up CDs by the outer edges or the edge of the hole and the outer edge. If the surface of a CD is soiled, clean it with a soft, lint-free cloth or dampen a clean, soft cloth in a mild, neutral detergent solution mixed with water. Make sure the wiping process starts from the center to the edge. Inserting a CD Insert a CD partway into the slot, label side up. The player pulls it in and the CD should begin playing. Ejecting a CD Z EJECT : Press and release to eject the disc. Remove the CD when Remove Disc displays. If the disc is not removed, after several seconds the disc is automatically pulled back into the player. Playing a CD If the ignition or radio is turned off with a CD in the player, it stays in the player. When the ignition or


radio is turned on, the CD starts playing where it stopped, if it was the last selected audio source. When a CD is inserted, the CD symbol displays on the left side of the radio display. As each new track starts to play, the track number displays. The CD player can play the smaller 8 cm (3 in) single CDs with an adapter ring. Full-size CDs and the smaller CDs are loaded in the same manner. CD/AUX (CD/Auxiliary) : Press to cycle between CD or Auxiliary when listening to the radio. The CD icon and a message showing the disc and/or track number will display when a CD is in the player. Press again and the system automatically searches for an auxiliary input device; see Auxiliary Devices 0 144. If a portable audio player is not connected, “No Input Device Found” displays. 4 (Information) : Press to display additional text information related to the current song. If information is available, the song title information


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


displays on the top line of the display and artist information displays on the bottom line. When information is not available, NO INFO displays. f (Tune) : Turn to select tracks on the CD that is currently playing. © SEEK : Press to go to the start of the current track if more than 10 seconds on the CD have played. Press to go to the previous track if less than 10 seconds on the CD have played. Press and hold, or press multiple times, to continue moving backward through the tracks on the CD. ¨ SEEK : Press to go to the next track. Press and hold, or press multiple times, to continue moving forward through the tracks on the CD. s REV (Fast Reverse) : Press and hold to reverse playback quickly within a track. \ FWD (Fast Forward) : Press and hold to advance playback quickly within a track.


RDM (Random) : Press to listen to tracks in random, rather than sequential order. To use random, do one of the following: For the AM-FM Radio with CD/MP3: 1. Press the RDM button until the


random icon displays.


2. Press the RDM button again


until the random icon disappears from the display.


For the Radio with CD/MP3: 1. Press the softkey positioned


under the RDM tab until Random Current Disc displays. 2. Press the softkey again to turn


off random play.


MP3-Supported Files The Radio with CD/MP3 have the capability of playing an MP3 CD-R or CD-RW disc.


Format Radios that have the capability of playing MP3s can play .mp3 or .wma files that were recorded onto a CD-R or CD-RW disc. The files can be recorded with the following fixed


Infotainment System


141


bit rates: 32 kbps, 40 kbps, 56 kbps, 64 kbps, 80 kbps, 96 kbps, 112 kbps, 128 kbps, 160 kbps, 192 kbps, 224 kbps, 256 kbps, and 320 kbps or a variable bit rate.


Compressed Audio or Mixed Mode Discs The radio can play discs that contain both uncompressed CD audio and MP3 files. If both formats are on the disc, the radio reads all MP3 files first, then the uncompressed CD audio files.


CD-R- or CD-RW-Supported File and Folder Structure The radio supports: . Up to 50 folders. . Up to eight folders in depth. . Up to 50 playlists. . Up to 255 files. . Playlists with an .m3u or .wpl


extension.


. Files with an .mp3, .wma, or .cda


file extension.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


142


Infotainment System


Root Directory The root directory is treated as a folder. Files are stored in the root directory when the disc or storage device does not contain folders. Files accessed from the root directory of a CD display as F1 ROOT.


Empty Folder Folders that do not contain files are skipped, and the player advances to the next folder that contains files.


Order of Play Compressed audio files are accessed in the following order: . Playlists (Px). . Files stored in the root directory. . Files stored in folders in the root


directory.


Tracks are played in the following order: . Play begins from the first track in


the first playlist and continues sequentially through all tracks in each playlist. When the last


track of the last playlist has played, play continues from the first track of the first playlist.


. Play begins from the first track in


the first folder and continues sequentially through all tracks in each folder. When the last track of the last folder has played, play continues from the first track of the first folder.


File System and Naming The song name that displays is the song name contained in the ID3 tag. If the song name is not present in the ID3 tag, then the radio displays the file name without the extension (such as .mp3) as the track name. Track names longer than 32
characters or four pages are shortened. The display does not show parts of words on the last page of text, and the extension of the file name is not displayed.


Preprogrammed Playlists CDs that have preprogrammed playlists created using WinAmp™, MusicMatch™, or Real Jukebox™ software can be accessed; however,


there is no playlist-editing capability using the radio. These playlists are treated as special folders containing compressed audio song files. Playlists that have an .m3u or .pls file extension and are stored on a USB device may be supported by the radio with a USB port. Playlists can be changed by using the softkeys below the S c and c T tabs, the f knob, the © SEEK button, or the ¨ SEEK button. An MP3 CD-R or CD-RW that has been recorded without using file folders can be played. If a CD-R or CD-RW contains more than the maximum of 50 folders, 15 playlists, and 512 folders and files, the player allows access and navigates up to the maximum, but all items over the maximum are not accessible. Playing an MP3
4 (Information) : Press to display additional text information related to the current song. If information is available, the song title information displays on the top line of the display and artist information


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


displays on the bottom line. When information is not available, NO INFO displays. f (Tune) : Turn to select MP3s on the CD currently playing. © SEEK : Press to go to the start of the track, if more than 10 seconds have played. Press and hold or press multiple times to continue moving backward through tracks. ¨ SEEK : Press to go to the next track. Press and hold or press multiple times to continue moving forward through tracks. s REV (Reverse) : Press and hold to reverse playback quickly. Sound is heard at a reduced volume and the elapsed time of the file displays. Release s REV to resume playing. \ FWD (Fast Forward) : Press and hold to advance playback quickly. Sound is heard at a reduced volume and the elapsed time of the file displays. Release \ FWD to resume playing. The elapsed time of the file displays.


S c (Previous Folder) : Press the softkey below the S c tab to go to the first track in the previous folder. c T (Next Folder) : Press the softkey below the c T tab to go to the first track in the next folder. RDM (Random) : Press to listen to tracks in random, rather than sequential order. To use random, do one of the following: For the Radio with CD/MP3: 1. Press the softkey under the


RDM tab until Random Current Disc displays.


2. Press the softkey again to turn


off random play.


h (Music Navigator) : Press the softkey below the h tab to play the files in order by artist or album. The player scans the disc to sort the files by artist and album ID3 tag information. It can take several minutes to scan the disc depending


Infotainment System


143


on the number of files on the disc. The radio may begin playing while it is scanning in the background. When the scan is finished, the disc begins playing files in order by artist. The current artist playing is shown on the second line of the display. Once all songs by that artist are played, the player moves to the next artist in alphabetical order and begins playing files by that artist. To listen to files by another artist, press the softkey below either arrow tab. The disc goes to the next or previous artist in alphabetical order. Continue pressing either softkey below the arrow tab until the desired artist displays. To change from playback by artist to playback by album: 1. Press the softkey below the


Sort By tab.


2. Press one of the softkeys


below the Album tab from the sort screen.


3. Press the softkey below the


Back tab to return to the main music navigator screen.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


144


Infotainment System


The album name displays on the second line between the arrows, and songs from the current album begin to play. Once all songs from that album have played, the player moves to the next album in alphabetical order on the CD and begins playing MP3s from that album. To exit music navigator mode, press the softkey below the Back tab to return to normal MP3 playback. CD Player Messages CHECK DISC : If this message displays and/or the CD ejects, it could be for one of the following reasons:


It is very hot. When the temperature returns to normal, the CD should play.


. The road is very rough. When


the road becomes smoother, the CD should play.


. The CD is dirty, scratched, wet,


or upside down.


. The air is very humid. If so, wait


about an hour and try again.


. There was a problem while


burning the CD.


. The label is caught in the CD


player.


If the CD is not playing correctly, for any other reason, try a known good CD. If any error occurs repeatedly or if an error cannot be corrected, contact your dealer. If the radio displays an error message, write it down and provide it to your dealer when reporting the problem.


Auxiliary Devices


Using the Auxiliary Input Jack Radios with an auxiliary input jack on the lower right side of the faceplate can connect to an external audio device such as an iPod®, MP3 player, or CD player, for use as another source for audio listening. This input jack is not an audio output; do not plug headphones into the front auxiliary input jack.


Drivers are encouraged to set up any auxiliary device while the vehicle is in P (Park). See Defensive Driving 0 164 for more information on driver distraction. To use a portable audio player, connect a 3.5 mm (1/8 in) cable to the radio's front auxiliary input jack. When a device is connected, press the radio CD/AUX button to begin playing audio from the device over the vehicle speakers. For optimal sound quality, increase the portable audio device's volume to the loudest level. It is always best to power the portable audio device through its own battery while playing. O (Power/Volume) : Turn clockwise or counterclockwise to increase or decrease the volume of the portable player. Additional volume adjustments might have to be made from the portable device if the volume is not loud or soft enough.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


BAND : If equipped, press to listen to the radio when a portable audio device is playing. The portable audio device continues playing. CD/AUX (CD/Auxiliary) : If equipped, press to play a CD when a portable audio device is playing. Press again and the system begins playing audio from the connected portable audio player. If a portable audio player is not connected, “No Input Device Found” displays. SRCE (Source) : If equipped, press to listen to the radio when a portable audio device is playing. The portable audio device continues playing. Press to play a CD when a portable audio device is playing. Press again and the system begins playing audio from the connected portable audio player. If a portable audio player is not connected, “No Input Device Found” displays.


Using the USB Port Radios with a USB port can control a USB storage device or an iPod® using the radio buttons and knobs. See “Playing an MP3” in CD Player 0 139 for information about how to connect and control a USB storage device or an iPod.


USB Support


If equipped, the USB port is on the instrument panel and uses the USB 2.0 standard.


USB-Supported Devices . USB flash drive . Portable USB hard drive


Infotainment System


145


. Fifth generation or later iPod


iPod nano® iPod touch® iPod classic®


Not all iPods and USB drives are compatible with the USB port. Make sure the iPod has the latest firmware from Apple® for proper operation. iPod firmware can be updated using the latest iTunes® application. See www.apple.com/ itunes. For help with identifying the iPod, go to www.apple.com/support. Radios that have a USB port can play .mp3 and .wma files that are stored on a USB storage device as well as AAC files that are stored on an iPod.


USB-Supported File and Folder Structure The radio supports: . Up to 700 folders. . Up to eight folders in depth. . Up to 65,535 files.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


146


Infotainment System


. Folder and file names up to


64 bytes.


. Files with an .mp3 or .wma file


extension.


. AAC files stored on an iPod. . FAT16. . FAT32. Connecting a USB Storage Device or iPod The USB port can be used to control an iPod or a USB storage device. To connect a USB storage device, connect the device to the USB port on the instrument panel. To connect an iPod, connect one end of the USB cable that came with the iPod to the iPod’s dock connector and connect the other end to the USB port on the instrument panel. If the vehicle is on and the USB connection works, “OK to disconnect” and a GM logo may appear on the iPod, and iPod appears on the radio display. The iPod music appears on the radio display and begins playing.


The iPod charges while it is connected to the vehicle if the vehicle is in the ACC/ACCESSORY or ON/RUN position. When the vehicle is turned off, the iPod automatically powers off and will not charge or draw power from the vehicle's battery. If you have an older iPod model that is not supported, it can still be used by connecting it to the auxiliary input jack using a standard 3.5 mm (1/8 in) stereo cable. See “Using the Auxiliary Input Jack” previously in this section. Using the Radio to Control a USB Storage Device or iPod The radio can control a USB storage device or an iPod using the radio buttons and knobs, and display song information on the radio display. f (Tune) : Turn to select files. © SEEK : Press to go to the start of the track, if more than 10 seconds have played. Press and hold or press multiple times to continue moving backward through tracks.


¨ SEEK : Press to go to the next track. Press and hold or press multiple times to continue moving forward through tracks. s REV (Reverse) : Press and hold to reverse playback quickly. Sound is heard at a reduced volume. Release s REV to resume playing. The elapsed time of the file displays. \ FWD (Fast Forward) : Press and hold to advance playback quickly. Sound is heard at a reduced volume. Release \ FWD to resume playing. The elapsed time of the file displays. 4 (Information) : Press to display additional information about the selected track.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Using Softkeys to Control a USB Storage Device or iPod The five softkeys below the radio display are used to control the functions listed below. To use the softkeys: 1. Press the first or fifth softkey


below the radio display to display the functions listed below, or press the softkey below the function if it is currently displayed.


2. Press the softkey below the tab


with the function on it to use that function.


j (Pause) : Press the softkey below j to pause the track. The tab appears raised when pause is being used. Press the softkey below j again to resume playback. Back : Press the softkey below the Back tab to go back to the main display screen on an iPod, or the root directory on a USB storage device.


c (Folder View) : Press the softkey below c to view the contents of the current folder on the USB drive. To browse and select files:


1. Press the softkey below c. 2. Turn f to scroll through the list


of folders.


3. Press f to select the desired


folder. If there is more then one folder, repeat Steps 1 and 2
until the desired folder is reached.


4. Turn f to scroll through the files in the selected folder.


5. Press f to select the desired


file to be played.


To skip through large lists, the five softkeys can be used to navigate in the following order: . First softkey, first item in the list. . Second softkey, 1% through the


list each time the softkey is pressed.


Infotainment System


147


. Third softkey, 5% through the list each time the softkey is pressed. . Fourth softkey, 10% through the


list each time the softkey is pressed.


. Fifth softkey, end of the list. h (Music Navigator) : Press the softkey below h to view and select a file on an iPod, using the iPod's menu system. Files are sorted by: . Playlists . Artists . Albums . Genres . Songs . Composers To select files:


1. Press the softkey below h. 2. Turn f to scroll through the list


of menus.


3. Press f to select the


desired menu.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


148


Infotainment System


4. Turn f to scroll through the


folders or files in the selected menu.


5. Press f to select the desired


file to be played.


To skip through large lists, the five softkeys can be used to navigate in the following order: . First softkey, first item in the list. . Second softkey, 1% through the


list each time the softkey is pressed.


. Third softkey, 5% through the list each time the softkey is pressed. . Fourth softkey, 10% through the


list each time the softkey is pressed.


. Fifth softkey, end of the list.


Repeat Functionality To use Repeat: Press the softkey below " or ' to select between Repeat All and Repeat Track.


" (Repeat All) : Press the softkey below " to repeat all tracks. The tab appears lowered when Repeat All is being used. This is the default mode when a USB storage device or iPod is first connected. ' (Repeat Track) : Press the softkey below ' to repeat one track. The tab appears raised when Repeat Track is being used.


Shuffle Functionality To use Shuffle: Press the softkey below >, 2, C , or = to select between Shuffle Off, Shuffle All Songs/ Shuffle Songs, Shuffle Album, or Shuffle Folder. > (Shuffle Off) : Press the softkey below 2 to turn shuffle off. This is the default mode when a USB storage device or iPod is first connected.


2 (Shuffle All Songs/Shuffle Songs) : Press the softkey below = or C to shuffle all songs on the USB storage device or iPod. C (Shuffle Album) : Press the softkey below > to shuffle all songs in the current album on an iPod. = (Shuffle Folder) : Press the softkey below > to shuffle all songs in the current folder on a USB storage device.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


OnStar System


OnStar® with 4G LTE


If equipped with OnStar 4G LTE, up to seven devices, such as smartphones, tablets, and laptops, can be connected to high-speed Internet through the vehicle’s built-in Wi-Fi hotspot.


Call 1-888-4-ONSTAR (1-888-466-7827) to connect to an OnStar Advisor for assistance. See www.onstar.com for a detailed instruction guide, vehicle availability, details, and system limitations. Services and apps vary by make, model, year, carrier, availability, and conditions. 4G LTE service is available in select markets. 4G LTE performance is based on industry averages and vehicle systems design. Some services require a data plan.


Infotainment System


149


Phone


Bluetooth For vehicles equipped with Bluetooth capability, the system can interact with many cell phones, allowing: . Placement and receipt of calls in


a hands-free mode.


. Sharing of the cell phone’s


address book or contact list with the vehicle.


To minimize driver distraction, before driving, and with the vehicle parked: . Become familiar with the


features of the cell phone. Organize the phone book and contact lists clearly and delete duplicate or rarely used entries. If possible, program speed dial or other shortcuts.


. Review the controls and


operation of the infotainment system.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


150


Infotainment System


. Pair cell phone(s) to the vehicle.


The system may not work with all cell phones. See “Pairing” in this section for more information. If the cell phone has voice dialing capability, learn to use that feature to access the address book or contact list. See “Voice Pass-Thru” in this section for more information.


. See “Storing and Deleting Phone


Numbers” in this section for more information.


{ Warning


When using a cell phone, it can be distracting to look too long or too often at the screen of the phone or the infotainment system. Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.


A Bluetooth system can use a Bluetooth-capable cell phone with a Hands-Free Profile to make and receive phone calls. The system


can be used while the key is in the ON/RUN or ACC/ACCESSORY position. The range of the Bluetooth system can be up to 9.1 m (30 ft). Not all phones support all functions, and not all phones work with the in-vehicle Bluetooth system. See www.gm.com/bluetooth for more information on compatible phones. Voice Recognition The Bluetooth system uses voice recognition to interpret voice commands to dial phone numbers and name tags. For additional information, say “Help” while you are in a voice recognition menu. Noise : Keep interior noise levels to a minimum. The system may not recognize voice commands if there is too much background noise. When to Speak : A short tone sounds after the system responds indicating when it is waiting for a voice command. Wait until the tone and then speak. How to Speak : Speak clearly in a calm and natural voice.


Audio System When using the in-vehicle Bluetooth system, sound comes through the vehicle's front audio system speakers and overrides the audio system. Use the audio system volume knob, during a call, to change the volume level. The adjusted volume level remains in memory for later calls. To prevent missed calls, a minimum volume level is used if the volume is turned down too low. Bluetooth Controls Use the buttons on the steering wheel to operate the in-vehicle Bluetooth system. See Steering Wheel Controls 0 86. b / g (Push to Talk) : Press to answer incoming calls, confirm system information, and start speech recognition. c / x (End) : Press to end a call, reject a call, or cancel an operation.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Pairing A Bluetooth-enabled cell phone must be paired to the Bluetooth system and then connected to the vehicle before it can be used. See the cell phone manufacturer's user guide for Bluetooth functions before pairing the cell phone. If a Bluetooth phone is not connected, calls will be made using OnStar Hands-Free Calling, if equipped. See OnStar, if equipped.


Pairing Information . A Bluetooth phone with MP3
capability cannot be paired to the vehicle as a phone and an MP3 player at the same time. . Up to five cell phones can be


paired to the Bluetooth system. . The pairing process is disabled


when the vehicle is moving.


. Pairing only needs to be


completed once, unless the pairing information on the cell phone changes or the cell phone is deleted from the system.


. Only one paired cell phone can be connected to the Bluetooth system at a time. If multiple paired cell phones are within range of the system, the system connects to the first available paired cell phone in the order that they were first paired to the system. To connect to a different paired phone, see “Connecting to a Different Phone” later in this section.


Pairing a Phone 1. Press and hold b / g for


two seconds.


2. Say “Bluetooth.” This command


can be skipped.


3. Say “Pair.” The system


responds with instructions and a four-digit Personal Identification Number (PIN). The PIN is used in Step 5.


4. Start the pairing process on the


cell phone that you want to pair. For help with this process, see the cell phone manufacturer's user guide.


Infotainment System


151


5. Locate the device named “Your


Vehicle” in the list on the cell phone. Follow the instructions on the cell phone to enter the PIN provided in Step 3. After the PIN is successfully entered, the system prompts you to provide a name for the paired cell phone. This name will be used to indicate which phones are paired and connected to the vehicle. The system responds with “ has been successfully paired” after the pairing process is complete.


6. Repeat Steps 1–5 to pair


additional phones.


Listing All Paired and Connected Phones The system can list all cell phones paired to it. If a paired cell phone is also connected to the vehicle, the system responds with “is connected” after that phone name. 1. Press and hold b / g for


two seconds.


2. Say “Bluetooth.”


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


152


Infotainment System


3. Say “List.”


3. Say “Change phone.”


Deleting a Paired Phone If the phone name you want to delete is unknown, see “Listing All Paired and Connected Phones.” 1. Press and hold b / g for


two seconds.


2. Say “Bluetooth.” 3. Say “Delete.” The system asks


which phone to delete.


4. Say the name of the phone you


want to delete.


Connecting to a Different Phone To connect to a different cell phone, the Bluetooth system looks for the next available cell phone in the order in which all the available cell phones were paired. Depending on which cell phone you want to connect to, you may have to use this command several times. 1. Press and hold b / g for


two seconds.


2. Say “Bluetooth.”


If another cell phone is found, the response will be “ is now connected.” If another cell phone is not found, the original phone remains connected.


Storing and Deleting Phone Numbers The system can store up to 30
phone numbers as name tags in the Hands-Free Directory that is shared between the Bluetooth and OnStar systems, if equipped. The following commands are used to delete and store phone numbers. Store : This command will store a phone number, or a group of numbers as a name tag. Digit Store : This command allows a phone number to be stored as a name tag by entering the digits one at a time. Delete : This command is used to delete individual name tags.


Delete All Name Tags : This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped.


Using the “Store” Command 1. Press and hold b / g for


two seconds. 2. Say “Store.” 3. Say the phone number or


group of numbers you want to store all at once with no pauses, then follow the directions given by the system to save a name tag for this number.


Using the “Digit Store” Command If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


1. Press and hold b / g for


two seconds.


2. Say “Digit Store.” 3. Say each digit, one at a time,


that you want to store. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Store,” and then follow the directions given by the system to save a name tag for this number.


Using the “Delete” Command 1. Press and hold b / g for


two seconds. 2. Say “Delete.” 3. Say the name tag you want to


delete.


Using the “Delete All Name Tags” Command This command deletes all stored name tags in the Hands-Free Calling Directory and the OnStar Turn-by-Turn Destinations Directory, if equipped.


To delete all name tags: 1. Press and hold b / g for


two seconds.


2. Say “Delete all name tags.” Listing Stored Numbers The list command will list all stored numbers and name tags.


Using the “List” Command 1. Press and hold b / g for


two seconds.


2. Say “Directory.” 3. Say “Hands-Free Calling.” 4. Say “List.” Making a Call Calls can be made using the following commands. Dial or Call : The dial or call command can be used interchangeably to dial a phone number or a stored name tag. Digit Dial : This command allows a phone number to be dialed by entering the digits one at a time.


Infotainment System


153


Re-dial : This command is used to dial the last number used on the cell phone.


Using the “Dial” or “Call” Command 1. Press and hold b / g for


two seconds.


2. Say “Dial” or “Call.” 3. Say the entire number without pausing, or say the name tag. Once connected, the person called will be heard through the audio speakers.


Calling 911 Emergency 1. Press and hold b / g for


two seconds.


2. Say “Dial” or “Call.” 3. Say “911.” 4. Say “Dial” or “Call.” Once connected, the person called will be heard through the audio speakers.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


154


Infotainment System


Using the “Digit Dial” Command The digit dial command allows a phone number to be dialed by entering the digits one at a time. After each digit is entered, the system repeats back the digit it heard followed by a tone. If an unwanted number is recognized by the system, say “Clear” at any time to clear the last number. To hear all of the numbers recognized by the system, say “Verify” at any time. 1. Press and hold b / g for


two seconds.


2. Say “Digit Dial.” 3. Say each digit, one at a time,


that you want to dial. After each digit is entered, the system repeats back the digit it heard followed by a tone. After the last digit has been entered, say “Dial.”


Once connected, the person called will be heard through the audio speakers.


Using the “Re-dial” Command 1. Press and hold b / g for


two seconds.


2. After the tone, say “Re-dial.” Once connected, the person called will be heard through the audio speakers. Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. . Press b / g to answer the call. . Press c / x to ignore a call. Call Waiting Call waiting must be supported on the cell phone and enabled by the wireless service carrier. . Press b / g to answer an


incoming call when another call is active. The original call is placed on hold.


. Press b / g again to return to


the original call.


. To ignore the incoming call, no


action is required.


. Press c / x to disconnect the current call and switch to the call on hold.


Three-Way Calling Three-way calling must be supported on the cell phone and enabled by the wireless service carrier. 1. While on a call, press b / g. 2. Say “Three-way call.” 3. Use the dial or call command to dial the number of the third party to be called.


4. Once the call is connected, press b / g to link all callers together.


Ending a Call Press c / x to end a call.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. . To mute a call, press b / g , and


then say “Mute call.”


. To cancel mute, press b / g , and then say “Un-mute call.”


Transferring a Call Audio can be transferred between the Bluetooth system and the cell phone. The cell phone must be paired and connected with the Bluetooth system before a call can be transferred. The connection process can take up to two minutes after the ignition is turned to ON/RUN.


Transferring Audio from the Bluetooth System to a Cell Phone During a call with the audio in the vehicle: 1. Press b / g. 2. Say “Transfer Call.”


Transferring Audio to the Bluetooth System from a Cell Phone During a call with the audio on the cell phone, press b / g. The audio transfers to the vehicle. If the audio does not transfer to the vehicle, use the audio transfer feature on the cell phone. See your cell phone manufacturer's user guide for more information. Voice Pass-Thru Voice pass-thru allows access to the voice recognition commands on the cell phone. See your cell phone manufacturer's user guide to see if the cell phone supports this feature. To access contacts stored in the cell phone: 1. Press and hold b / g for


two seconds.


2. Say “Bluetooth.” This command


can be skipped.


3. Say “Voice.” The system responds “OK, accessing .”


Infotainment System


155


The cell phone's normal prompt messages will go through their cycle according to the phone's operating instructions. Dual Tone Multi-Frequency (DTMF) Tones The Bluetooth system can send numbers and the numbers stored as name tags during a call. You can use this feature when calling a menu-driven phone system. Account numbers can also be stored for use.


Sending a Number or Name Tag During a Call 1. Press b / g. The system


responds “Ready,” followed by a tone.


2. Say “Dial.” 3. Say the number or name tag


to send.


Clearing the System Unless information is deleted out of the in-vehicle Bluetooth system, it will be retained indefinitely. This includes all saved name tags in the


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


156


Infotainment System


phone book and phone pairing information. For information on how to delete this information, see the previous section “Deleting a Paired Phone” and the previous sections on deleting name tags. Other Information The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc. and any use of such marks by General Motors is under license. Other trademarks and trade names are those of their respective owners. See Radio Frequency Statement 0 320.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Climate Controls


Climate Control Systems


Climate Controls


157


The heating, cooling, and ventilation for the vehicle can be controlled with this system.


Climate Control Systems


Climate Control Systems . . . . . 157
Rear Heating System . . . . . . . . . 159
Rear Climate Control


System . . . . . . . . . . . . . . . . . . . . . . 159


Air Vents


Air Vents . . . . . . . . . . . . . . . . . . . . . 162


Vehicles without Air Conditioning


1. Fan Control 2. Temperature Control 3. Air Delivery Mode Control 9 (Fan Control) : Turn the knob clockwise or counterclockwise to increase or decrease the fan speed. 9 (Off) : Turns the system off.


Temperature Control : Turn the knob clockwise or counterclockwise to increase or decrease the temperature inside the vehicle. Air Delivery Mode Control : Turn the knob clockwise or counterclockwise to change the current airflow mode. H (Vent) : Air is directed to the instrument panel outlets.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


158


Climate Controls


) (Bi-Level) : Air is divided between the instrument panel and floor outlets, with some air directed toward the windshield. 6 (Floor) : Air is directed to the floor outlets with some air directed to the windshield and side windows. - (Defog) : This mode clears the windows of fog or moisture. Outside air is directed to the floor and defroster outlets. Adjust the temperature knob for warmer or cooler air. The air conditioning compressor might turn on in this setting to dehumidify the air. 1 (Defrost) : This mode clears the windshield of fog or frost more quickly. Air is directed to the windshield, with some to the floor outlets and front side windows. The air conditioning compressor might turn on in this setting to dehumidify the air. Do not drive the vehicle until all the windows are clear.


Vehicles with Air Conditioning


1. Fan Control 2. Temperature Control 3. Air Delivery Mode Control 4. Rear Window Defogger On hot days, open the windows to let hot inside air escape; then close them. This helps to reduce the time needed for the vehicle to cool down and the system operates more efficiently. # (Air Conditioning) : Cools and dehumidifies the air inside of the vehicle.


V (Maximum Air Conditioning) : Cools the air inside the vehicle faster, by recirculating the inside air. Rear Window Defogger If equipped with a rear window defogger, a warming grid is used to remove fog or frost from the rear window. 1 (Rear Window Defogger) : Press to turn the rear window defogger on or off. An indicator light on the button comes on to show that the rear window defogger is on.


Climate Controls


159


9 (Off) : This turns the rear heating system off.


Rear Climate Control System If equipped with a rear heating and air conditioning system, it controls the temperature, fan speed, and air delivery for the rear seat passengers only. The front climate control panel is in the overhead console between the driver and front passenger.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


The defogger only works when the ignition is in ON/RUN. The defogger turns off if the ignition is in the ACC/ ACCESSORY or LOCK/OFF position. Do not drive the vehicle until all the windows are clear.


Caution


Do not use a razor blade or sharp object to clear the inside rear window. Do not adhere anything to the defogger grid lines in the rear glass. These actions may damage the rear defogger. Repairs would not be covered by the vehicle warranty.


Rear Heating System If equipped, the rear heating system lets you adjust the amount of air flowing into the rear of the vehicle, from the front seating area. This feature works with the main climate control system in the vehicle.


AUX : The thumbwheel for this system is on the instrument panel below the audio system. 9 (Fan) : Turn the thumbwheel up or down to increase or decrease the amount of heated air sent to the rear seating area. Q (High) : This position supplies the most amount of heat to the rear seating area. c (Medium) : This position supplies half the amount of heat to the rear seating area. R (Low) : This position supplies the least amount of heat to the rear seating area.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


160


Climate Controls


Front Climate Control Panel


1. Fan Control 2. Air Delivery Mode Control 3. Temperature Control Use this control panel to maintain a separate temperature setting. Adjust the direction of the airflow or adjust the fan speed for the rear seat passenger(s).


When the fan knob is in the AUX position, the rear climate control panel can be used to adjust the climate settings in the rear seating area.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Climate Controls


161


Temperature Control : Turn clockwise or counterclockwise to increase or decrease the temperature in the rear seating area. The air conditioning system on the main climate control panel must be turned on to direct cooled air to the rear of the vehicle. If it is not on, then the temperature in the rear of the vehicle remains at cabin temperature. Air Delivery Mode Control : Turn clockwise or counterclockwise to change the direction of the airflow in the rear seating area. To change the current mode, select one of the following: H (Vent) : Air is directed to the upper outlets, with some directed to the floor outlets. 2 (Floor) : Air is directed to the floor outlets. Be sure to keep the area under the front seats clear of any objects so that the air inside of the vehicle can circulate effectively.


Rear Climate Control Panel


1. Fan Control 2. Air Delivery Mode Control 3. Temperature Control For vehicles with a rear climate control panel, it is located overhead behind the driver and front passenger, centered in front of the second row. To adjust the rear climate control panel settings by a rear seat passenger, the front climate control panel fan knob must be in the AUX position. The fan speed, air delivery mode, and temperature can then be adjusted.


AUX (Auxiliary) : Turn the fan knob on the front climate control panel to AUX to let rear seat passengers use the control panel in the rear seating area. This disables the front control panel. To return control to the front panel, move the fan knob out of AUX. 9 (Off) : Turns the system off. 9 (Fan Control) : Turn clockwise or counterclockwise to increase or decrease the fan speed in the rear seating area.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


162


Climate Controls


For information on how to use the main climate control system, see Climate Control Systems 0 157. For information on ventilation, see Air Vents 0 162.


Air Vents Use the outlets located near the center and on the sides of the instrument panel to change the direction of airflow. Operation Tips . Clear away any ice, snow or


leaves from the air inlets at the base of the windshield that may block the flow of air into the vehicle.


. Use of non-GM approved hood deflectors may adversely affect the performance of the system.


. Keep the path under the front seats clear of objects to help circulate the air inside of the vehicle more effectively.


GMC Savana Owner Manual 2016 - crc - 6/17/15


(GMNA-Localizing-U.S./Canada-9159232)


Driving and Operating


163


Driving and Operating


Driving Information


Distracted Driving . . . . . . . . . . . . 164
Defensive Driving . . . . . . . . . . . . . 164
Drunk Driving . . . . . . . . . . . . . . . . . 164
Control of a Vehicle . . . . . . . . . . . 165
Braking . . . . . . . . . . . . . . . . . . . . . . . 165
Steering . . . . . . . . . . . . . . . . . . . . . . 165
Off-Road Recovery . . . . . . . . . . . 166
Loss of Control . . . . . . . . . . . . . . . 166
Driving on Wet Roads . . . . . . . . 167
Hill and Mountain Roads . . . . . 168
Winter Driving . . . . . . . . . . . . . . . . 168
If the Vehicle Is Stuck . . . . . . . . 169
Vehicle Load Limits . . . . . . . . . . . 170

Loading...
x