Download PDF Manual


{ Warning


Tires could explode during improper service. Attempting to mount or dismount a tire could cause injury or death. Only your dealer or authorized tire service center should mount or dismount the tires.


{ Warning


Mixing tires of different sizes, brands, or types may cause loss of control of the vehicle, resulting in a crash or other vehicle damage. Use the correct size, brand, and type of tires on all wheels.


{ Warning


Using bias-ply tires on the vehicle may cause the wheel rim flanges to develop cracks after many miles of driving. A tire and/or wheel could fail suddenly and cause a crash. Use only radial-ply tires with the wheels on the vehicle.


If the vehicle tires must be replaced with a tire that does not have a TPC Spec number, make sure they are the same size,


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


load range, speed rating, and construction (radial) as the original tires. Vehicles that have a tire pressure monitoring system could give an inaccurate low-pressure warning if non-TPC Spec rated tires are installed. See Tire Pressure Monitor System 0 269. The Tire and Loading Information label indicates the original equipment tires on the vehicle. See Vehicle Load Limits 0 181.


Different Size Tires and Wheels If wheels or tires are installed that are a different size than the original equipment wheels and tires, vehicle performance, including its braking, ride and handling characteristics, stability, and resistance to rollover may be affected. If the vehicle has electronic systems such as antilock brakes, rollover airbags, traction


control, electronic stability control, or All-Wheel Drive, the performance of these systems can also be affected.


{ Warning


If different sized wheels are used, there may not be an acceptable level of performance and safety if tires not recommended for those wheels are selected. This increases the chance of a crash and serious injury. Only use GM specific wheel and tire systems developed for the vehicle, and have them properly installed by a GM certified technician.


See Buying New Tires 0 275 and Accessories and Modifications 0 227.


Uniform Tire Quality Grading The following information relates to the system developed by the United States National Highway


Vehicle Care


277


Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance. This applies only to vehicles sold in the United States. The grades are molded on the sidewalls of most passenger car tires. The Uniform Tire Quality Grading (UTQG) system does not apply to deep tread, winter tires, compact spare tires, tires with nominal rim diameters of 10 to 12 inches (25 to 30 cm), or to some limited-production tires. While the tires available on General Motors passenger cars and light trucks may vary with respect to these grades, they must also conform to federal safety requirements and additional General Motors Tire Performance Criteria (TPC) standards.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


278


Vehicle Care


Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example:


Treadwear 200 Traction AA Temperature A All Passenger Car Tires Must Conform to Federal Safety Requirements In Addition To These Grades.


Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1½) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the


norm due to variations in driving habits, service practices and differences in road characteristics and climate.


Traction The traction grades, from highest to lowest, are AA, A, B, and C. Those grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics.


Temperature The temperature grades are A (the highest), B, and C, representing the tire's resistance


to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law. Warning: The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Wheel Alignment and Tire Balance The tires and wheels were aligned and balanced at the factory to provide the longest tire life and best overall performance. Adjustments to wheel alignment and tire balancing are not necessary on a regular basis. Consider an alignment check if there is unusual tire wear or the vehicle is significantly pulling to one side or the other. Some slight pull to the left or right, depending on the crown of the road and/or other road surface variations such as troughs or ruts, is normal. If the vehicle is vibrating when driving on a smooth road, the tires and wheels may need to be rebalanced. See your dealer for proper diagnosis.


Wheel Replacement Replace any wheel that is bent, cracked, or badly rusted or corroded. If wheel nuts keep coming loose, the wheel, wheel bolts, and wheel nuts should be replaced. If the wheel leaks air, replace it.


Some aluminum wheels can be repaired. See your dealer if any of these conditions exist. Your dealer will know the kind of wheel that is needed. Each new wheel should have the same load-carrying capacity, diameter, width, offset, and be mounted the same way as the one it replaces. Replace wheels, wheel bolts, wheel nuts, or Tire Pressure Monitor System (TPMS) sensors with new GM original equipment parts.


{ Warning


Using the wrong replacement wheels, wheel bolts, or wheel nuts can be dangerous. It could affect the braking and handling of the vehicle. Tires can lose air, and cause loss of control, causing a crash. Always use the correct wheel, wheel bolts, and wheel nuts for replacement.


Vehicle Care


279


Caution


The wrong wheel can also cause problems with bearing life, brake cooling, speedometer or odometer calibration, headlamp aim, bumper height, vehicle ground clearance, and tire or tire chain clearance to the body and chassis.


Used Replacement Wheels


{ Warning


Replacing a wheel with a used one is dangerous. How it has been used or how far it has been driven may be unknown. It could fail suddenly and cause a crash. When replacing wheels, use a new GM original equipment wheel.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


280


Vehicle Care


Tire Chains


{ Warning


Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause loss of control and a crash. Use another type of traction device only if its manufacturer recommends it for the vehicle's tire size combination and road conditions. Follow that manufacturer's instructions. To avoid vehicle damage, drive slow and readjust or remove the traction device if it contacts the vehicle. Do not spin the wheels. If traction devices are used, install them on the front tires.


If a Tire Goes Flat It is unusual for a tire to blow out while driving, especially if the tires are maintained properly. See Tires 0 261. If air goes out of a tire, it is much more likely to leak out slowly. But if there ever is a blowout, here are a few tips about what to expect and what to do: If a front tire fails, the flat tire creates a drag that pulls the vehicle toward that side. Take your foot off the accelerator pedal and grip the steering wheel firmly. Steer to maintain lane position, and then gently brake to a stop, well off the road, if possible. A rear blowout, particularly on a curve, acts much like a skid and may require the same correction as used in a skid. Stop pressing the accelerator pedal and steer to straighten the vehicle. It may be very bumpy and noisy. Gently brake to a stop, well off the road, if possible.


{ Warning


Driving on a flat tire will cause permanent damage to the tire. Re-inflating a tire after it has been driven on while severely underinflated or flat may cause a blowout and a serious crash. Never attempt to re-inflate a tire that has been driven on while severely underinflated or flat. Have your dealer or an authorized tire service center repair or replace the flat tire as soon as possible.


{ Warning


Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could (Continued)


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Warning (Continued)


Warning (Continued)


be badly injured or killed if the vehicle slips off the jack. If a jack is provided with the vehicle, only use it for changing a flat tire.


If a tire goes flat, avoid further tire and wheel damage by driving slowly to a level place, well off the road, if possible. Turn on the hazard warning flashers. See Hazard Warning Flashers 0 133. { Warning Changing a tire can be dangerous. The vehicle can slip off the jack and roll over or fall causing injury or death. Find a level place to change the tire.


(Continued)


To help prevent the vehicle from moving:


1. Set the parking brake firmly. 2. Put an automatic


transmission in P (Park) or a manual transmission in 1 (First) or R (Reverse).


3. Turn off the engine and do not restart while the vehicle is raised.


4. Do not allow passengers to


remain in the vehicle.


5. Place wheel blocks,


if equipped, on both sides of the tire at the opposite corner of the tire being changed.


Vehicle Care


281


When the vehicle has a flat tire (2), use the following example as a guide to assist in the placement of the wheel blocks (1), if equipped.


1. Wheel Block (If Equipped) 2. Flat Tire


The following information explains how to repair or change a tire.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


282


Vehicle Care


Tire Changing


Removing the Spare Tire and Tools


tether (2) from the stow rod, the tool bag (3) containing the wheel wrench and wheel blocks, and the spare tire (4). 4. Remove the jack, jack handle


extension, and two-piece wrench, if equipped.


Removing the Flat Tire and Installing the Spare Tire This vehicle may have aluminum wheels with exposed wheel nuts. Use the wheel wrench to loosen all the wheel nuts. Do not remove them yet. Or, this vehicle may have steel wheels with plastic covers.


1. Retainer Nut 2. Tool Bag Tether 3. Tool Bag 4. Spare Tire


To access the spare tire and tools: 1. Open the trunk. See Trunk


0 37.


2. Lift the load floor. 3. Turn the retainer nut (1)


counterclockwise to remove it. Then remove the tool bag


1. Hex Head Jack 2. Jack Handle Extension 3. Coin/Pierce Jack 4. Two-Piece Wrench


This vehicle may have one of the following: A coin/pierce jack (3), a jack handle extension (2), and a two-piece wrench (4), or a hex head jack (1) and two-piece wrench (4).


To remove the plastic covers and wheel nut caps, loosen the plastic nut caps with the wheel wrench in a counterclockwise direction. If needed, finish loosening them with your fingers. The plastic nut caps will not come off.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


If needed, use the flat end of the wheel wrench and pry along the edge of the cover until it comes off. The edge of the wheel cover could be sharp, so do not try to remove it with your bare hands. Do not drop the cover or lay it face down, as it could become scratched or damaged. Store the wheel cover in the trunk until the flat tire is repaired or replaced. Once you have removed the wheel cover, use the following procedure to remove the flat tire and install the spare tire. 1. Do a safety check before


proceeding. See If a Tire Goes Flat 0 280 for more information.


2. Turn the wheel wrench


counterclockwise once on each wheel nut to loosen it. Do not remove them yet.


3. Place the jack near the flat tire. 4. Place the wheel blocks on both sides of the tire at the opposite corner of the tire being changed. See If a Tire Goes Flat 0 280 for proper wheel block placement.


5. Place the jack under the


vehicle.


Vehicle Care


283


6.


If you have a coin/pierce jack, attach the jack handle extension to the jack by sliding the hook through the end of the jack. If you have a hex head jack, place the hex tube end of the wrench over the hex head of the jack.


Caution


Make sure that the jack lift head is in the correct position or you may damage your vehicle. The repairs would not be covered by your warranty.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


284


Vehicle Care


{ Warning


Raising the vehicle with the jack improperly positioned can damage the vehicle and even make the vehicle fall. To help avoid personal injury and vehicle damage, be sure to fit the jack lift head into the proper location before raising the vehicle.


{ Warning


Lifting a vehicle and getting under it to do maintenance or repairs is dangerous without the appropriate safety equipment and training. If a jack is provided with the vehicle, it is designed only for changing a flat tire. If it is used for anything else, you or others could be badly injured or killed if the vehicle slips off the jack. If a jack is provided with the vehicle, only use it for changing a flat tire.


7. Position the jack lift head at the


jack location nearest the flat tire. The location is indicated by a notch in the flange. The jack must not be used in any other position.


{ Warning


Getting under a vehicle when it is lifted on a jack is dangerous. If the vehicle slips off the jack, you could be badly injured or killed. Never get under a vehicle when it is supported only by a jack.


Hex Head Jack Shown, Coin/


Pierce Jack Similar


8. Raise the jack by turning the


handle clockwise until it comes in contact with the notch in the flange.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Vehicle Care


285


Warning (Continued)


towel can be used; however, use a scraper or wire brush later to remove all rust or dirt.


Make sure the jack lift head notch is placed in the flange notch. Raise the vehicle far enough off the ground so there is enough room for the road tire to clear the ground.


9. Remove all of the wheel nuts. 10. Remove the flat tire. { Warning


Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper (Continued)


11. Remove any rust or dirt from


the wheel bolts, mounting surfaces, and spare wheel.


12. Place the compact spare tire


on the wheel-mounting surface.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


286


Vehicle Care


{ Warning


Never use oil or grease on bolts or nuts because the nuts might come loose. The vehicle's wheel could fall off, causing a crash.


13. Reinstall the wheel nuts.


Tighten each nut by hand until the wheel is held against the hub.


14. Lower the vehicle by turning


the jack handle counterclockwise.


{ Warning


Wheel nuts that are improperly or incorrectly tightened can cause the wheels to become loose or come off. The wheel nuts should be tightened with a torque wrench to the proper torque specification after replacing. Follow the torque specification supplied by the aftermarket manufacturer when using accessory locking wheel


(Continued)


Warning (Continued)


nuts. See Capacities and Specifications 0 318 for original equipment wheel nut torque specifications.


Caution


Improperly tightened wheel nuts can lead to brake pulsation and rotor damage. To avoid expensive brake repairs, evenly tighten the wheel nuts in the proper sequence and to the proper torque specification. See Capacities and Specifications 0 318 for the wheel nut torque specification.


15. Tighten the wheel nuts firmly in


a crisscross sequence, as shown.


16. Lower the jack all the way and remove the jack from under the vehicle.


17. Tighten the wheel nuts firmly


with the wheel wrench.


18. Remove the wheel blocks and


return them to their proper storage location.


When reinstalling the wheel cover or center cap on the full-size tire, tighten all five plastic caps hand snug with the aid of the wheel


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


wrench and tighten them with the wheel wrench an additional one-quarter of a turn.


2. Remove the foam container


from the rear storage compartment.


Caution


Wheel covers will not fit on the vehicle's compact spare. If you try to put a wheel cover on the compact spare, the cover or the spare could be damaged.


Storing a Flat or Spare Tire and Tools


{ Warning


Storing a jack, a tire, or other equipment in the passenger compartment of the vehicle could cause injury. In a sudden stop or collision, loose equipment could strike someone. Store all these in the proper place.


Storing the Flat Tire and Tools 1. Replace the wheel wrench and


wheel blocks in the tool bag.


Coin/Pierce Jack Shown, Hex


Head Jack Similar


3. Place the flat tire in the storage


compartment with the valve stem down.


4. Place the jack and jack handle


extension, if the vehicle has one, in the foam container.


5. Place the foam container inside


the flat tire. Align the hole with the stow rod.


Vehicle Care


287


6. Place the tool bag tether over the stow rod and the tool bag rear of the flat tire.


7. Turn the retainer nut clockwise


until tight.


8. Replace the load floor.


The load floor may not lay flat. The compact spare is for temporary use only. Replace the compact spare tire with a full-size tire as soon as you can.


Storing the Compact Spare Tire and Tools Reverse the instructions for removing the spare tire and tools to store the compact spare tire.


Compact Spare Tire


{ Warning


Driving with more than one compact spare tire at a time could result in loss of braking and handling. This could lead to a


(Continued)


Caution


Tire chains will not fit the compact spare. Using them can damage the vehicle and the chains. Do not use tire chains on the compact spare.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


288


Vehicle Care


Warning (Continued)


crash and you or others could be injured. Use only one compact spare tire at a time.


If this vehicle has a compact spare tire, it was fully inflated when new; however, it can lose air over time. Check the inflation pressure regularly. It should be 420 kPa (60 psi). Stop as soon as possible and check that the spare tire is correctly inflated after being installed on the vehicle. The compact spare tire is designed for temporary use only. The vehicle will perform differently with the spare tire installed and it is recommended that the vehicle speed be limited to 80 km/h (50 mph). To conserve the tread of the spare tire, have the standard tire repaired or replaced as soon as convenient and return the spare tire to the storage area.


When using a compact spare tire, the ABS and Traction Control systems may engage until the spare tire is recognized by the vehicle, especially on slippery roads. Adjust driving to reduce possible wheel slip.


Caution


When the compact spare is installed, do not take the vehicle through an automatic car wash with guide rails. The compact spare can get caught on the rails which can damage the tire, wheel, and other parts of the vehicle.


Do not use the compact spare on other vehicles. Do not mix the compact spare tire or wheel with other wheels or tires. They will not fit. Keep the spare tire and its wheel together.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Vehicle Care


289


Jump Starting


Jump Starting - North America For more information about the vehicle battery, see Battery - North America 0 246. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely.


{ Warning WARNING: Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. WASH HANDS AFTER HANDLING. See California Proposition 65 Warning 0 227.


{ Warning


Batteries can hurt you. They can be dangerous because:


. They contain acid that can


burn you.


. They contain gas that can


explode or ignite.


. They contain enough electricity to burn you.


If you do not follow these steps exactly, some or all of these things can hurt you.


Caution


Ignoring these steps could result in costly damage to the vehicle that would not be covered by the vehicle warranty. Trying to start the vehicle by pushing or pulling it will not work, and it could damage the vehicle.


2.4L L4 Engine Shown, 2.0L L4


Engine Similar


1. Discharged Battery


Negative (–) Grounding Point


2. Discharged Battery


Positive (+) Post


3. Good Battery Negative


(–) Post


4. Good Battery


Positive (+) Post


The jump start positive post is located in the engine compartment on the driver side of the vehicle.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


290


Vehicle Care


The jump start negative grounding point is the engine block or an engine mounting bolt. Connect to a spot as far away from the discharged battery as possible. The jump start positive post and negative post are on the battery of the vehicle providing the jump start. The positive jump start connection is under a trim cover. Open the cover door to expose the terminal. These locations are used instead of a direct connection to the battery. 1. Check the other vehicle.


It must have a 12-volt battery with a negative ground system.


Caution


If the other vehicle does not have a 12-volt system with a negative ground, both vehicles can be damaged. Only use a vehicle that has a 12-volt system with a negative ground for jump starting.


2. Position the two vehicles so


that they are not touching.


3. Set the parking brake firmly


and put the shift lever in P (Park). See Shifting Into Park 0 192.


Caution


If any accessories are left on or plugged in during the jump starting procedure, they could be damaged. The repairs would not be covered by the vehicle warranty. Whenever possible, turn off or unplug all accessories on either vehicle when jump starting.


4. Turn the ignition to LOCK/OFF.


Turn off all lights and accessories in both vehicles, except the hazard warning flashers if needed. { Warning


An electric fan can start up even when the engine is not running and can injure you. Keep hands, clothing, and tools away from any underhood electric fan.


{ Warning


Using a match near a battery can cause battery gas to explode. People have been hurt doing this, and some have been blinded. Use a flashlight if you need more light. Battery fluid contains acid that can burn you. Do not get it on you. If you accidentally get it in your eyes or on your skin, flush the place with water and get medical help immediately.


{ Warning


Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running.


5. Connect one end of the red


positive (+) cable to the positive (+) post (2) on the discharged battery.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Caution (Continued)


vehicle. The repairs would not be covered by the vehicle warranty. Always connect and remove the jumper cables in the correct order, making sure that the cables do not touch each other or other metal.


Jumper Cable Removal Reverse the sequence exactly when removing the jumper cables. After starting the disabled vehicle and removing the jumper cables, allow it to idle for several minutes.


6. Connect the other end of the


red positive (+) cable to the positive (+) post (4) of the good battery.


7. Connect one end of the black


negative (–) cable to the negative (–) post (3) of the good battery.


8. Connect the other end of the


black negative (–) cable to the negative (–) grounding point (1) for the discharged battery.


9. Start the engine in the vehicle with the good battery and run the engine at idle speed for at least four minutes.


10. Try to start the vehicle that had


the dead battery. If it will not start after a few tries, it probably needs service.


Caution


If the jumper cables are connected or removed in the wrong order, electrical shorting may occur and damage the


(Continued)


Vehicle Care


291


Towing the Vehicle


Caution


Incorrectly towing a disabled vehicle may cause damage to the vehicle. The disabled vehicle should be towed on a flatbed car carrier. Use care when there is low ground clearance and/or special equipment. Attempting to pull the vehicle onto a flatbed without following the proper steps could damage the vehicle.


Consult your dealer or a professional towing service if the disabled vehicle must be towed. See Roadside Assistance Program 0 325. To load a vehicle onto a flatbed carrier: 1. The vehicle must be on a flat


surface.


2. The front tires must be properly


inflated. If necessary, move a rear tire to the front to replace a flat or damaged tire.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


292


Vehicle Care


3. Place a 1.2 m (4 ft) X 102 mm


4. Ramps (2) are required for the


(4 in) X 102 mm (4 in) wood beam (4) under the front cradle crossmember (3), and on top of both tow chains (5) to ensure the tow chains do not come into contact with the front fascia (1). Try to minimize the contact of the chains with the flexible air dam (2).


front fascia (3) to clear the flatbed (1). The ramp height should be approximately 102 mm (4 in). Lower the flatbed onto the set of ramps.


Caution


If ramps are not used, the front fascia will come into contact with the flatbed and may cause damage. Always use ramps.


5. After the front tires are on the


flatbed adjust the flatbed upward to provide additional clearance between the air dam, fascia, and flatbed.


6. When the fascia has enough clearance to clear the flatbed, lower the flatbed, and finish pulling the vehicle onto the flatbed.


7. Secure the vehicle to the


flatbed (2) using nonabrasive straps (1) through all four wheel openings and secure the straps to the flatbed (2).


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Recreational Vehicle Towing Recreational vehicle towing means towing the vehicle behind another vehicle – such as behind a motor home. The two most common types of recreational vehicle towing are known as dinghy towing and dolly towing. Dinghy towing is towing the vehicle with all four wheels on the ground. Dolly towing is towing the vehicle with two wheels on the ground and two wheels up on a device known as a dolly. Here are some important things to consider before recreational vehicle towing: . What is the towing capacity


of the towing vehicle? Be sure to read the tow vehicle manufacturer's recommendations.


. How far will the vehicle be


towed? Some vehicles have restrictions on how far and how long they can tow.


. Does the vehicle have the proper towing equipment? See your dealer or trailering professional for additional advice and equipment recommendations. Is the vehicle ready to be towed? Just as preparing the vehicle for a long trip, make sure the vehicle is prepared to be towed.


Caution


Use of a shield mounted in front of the vehicle grille could restrict airflow and cause damage to the transmission. The repairs would not be covered by the vehicle warranty. If using a shield, only use one that attaches to the towing vehicle.


Vehicle Care


293


Dinghy Towing


Caution


If the vehicle is towed with all four wheels on the ground, the drivetrain components could be damaged. The repairs would not be covered by the vehicle warranty. Do not tow the vehicle with all four wheels on the ground.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


294


Vehicle Care


The vehicle was not designed to be towed with all four wheels on the ground. If the vehicle must be towed, a dolly should be used. See “Dolly Towing” following. Dolly Towing


Caution


Towing the vehicle from the rear could damage it. Also, repairs would not be covered by the vehicle warranty. Never have the vehicle towed from the rear.


Tow the vehicle with the two rear wheels on the ground and the front wheels on a dolly. To tow the vehicle with two wheels on the ground and a dolly: 1. Put the front wheels on a dolly. 2. Put the shift lever in P (Park). 3. Secure the vehicle to the dolly.


Appearance Care


Exterior Care


Locks Locks are lubricated at the factory. Use a de-icing agent only when absolutely necessary, and have the locks greased after using. See Recommended Fluids and Lubricants 0 313. Washing the Vehicle To preserve the vehicle's finish, wash it often and out of direct sunlight.


Caution


Do not use petroleum-based, acidic, or abrasive cleaning agents as they can damage the vehicle's paint, metal, or plastic parts. If damage occurs, it would not be covered by the vehicle warranty. Approved cleaning products can be obtained from


(Continued)


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Caution (Continued)


your dealer. Follow all manufacturer directions regarding correct product usage, necessary safety precautions, and appropriate disposal of any vehicle care product.


Caution


Avoid using high-pressure washes closer than 30 cm (12 in) to the surface of the vehicle. Use of power washers exceeding 8,274 kPa (1,200 psi) can result in damage or removal of paint and decals.


The e symbol is on any underhood compartment electrical center that should not be power washed. This could cause damage that would not be covered by the vehicle warranty.


If using an automatic car wash, follow the car wash instructions. The windshield wiper and rear window wiper, if equipped, must be off. Remove any accessories that may be damaged or interfere with the car wash equipment. Rinse the vehicle well, before washing and after, to remove all cleaning agents completely. If they are allowed to dry on the surface, they could stain. Dry the finish with a soft, clean chamois or an all-cotton towel to avoid surface scratches and water spotting. Finish Care Application of aftermarket clearcoat sealant/wax materials is not recommended. If painted surfaces are damaged, see your dealer to have the damage assessed and repaired. Foreign materials such as calcium chloride and other salts, ice melting agents, road oil and tar, tree sap, bird droppings, chemicals from industrial chimneys, etc., can damage the vehicle's finish if they remain on painted surfaces. Wash


Vehicle Care


295


the vehicle as soon as possible. If necessary, use non-abrasive cleaners that are marked safe for painted surfaces to remove foreign matter. Occasional hand waxing or mild polishing should be done to remove residue from the paint finish. See your dealer for approved cleaning products. Do not apply waxes or polishes to uncoated plastic, vinyl, rubber, decals, simulated wood, or flat paint as damage can occur.


Caution


Machine compounding or aggressive polishing on a basecoat/clearcoat paint finish may damage it. Use only non-abrasive waxes and polishes that are made for a basecoat/ clearcoat paint finish on the vehicle.


To keep the paint finish looking new, keep the vehicle garaged or covered whenever possible.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


296


Vehicle Care


Protecting Exterior Bright Metal Moldings


Caution


Failure to clean and protect the bright metal moldings can result in a hazy white finish or pitting. This damage would not be covered by the vehicle warranty.


The bright metal moldings on the vehicle are aluminum, chrome or stainless steel. To prevent damage always follow these cleaning instructions: . Be sure the molding is cool to the touch before applying any cleaning solution.


. Use only approved cleaning


solutions for aluminum, chrome or stainless steel. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings.


. Always dilute a concentrated


cleaner according to the manufacturer’s instructions.


. Do not use cleaners that are not


intended for automotive use.


. Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish.


Cleaning Exterior Lamps/ Lenses, Emblems, Decals, and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses, emblems, decals, and stripes. Follow instructions under "Washing the Vehicle" previously in this section. Lamp covers are made of plastic, and some have a UV protective coating. Do not clean or wipe them when dry. Do not use any of the following on lamp covers: . Abrasive or caustic agents. . Washer fluids and other cleaning


agents in higher concentrations than suggested by the manufacturer.


. Solvents, alcohols, fuels, or other harsh cleaners. Ice scrapers or other hard items. . Aftermarket appearance caps or


covers while the lamps are illuminated, due to excessive heat generated.


Caution


Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty.


Caution


Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Air Intakes Clear debris from the air intakes, between the hood and windshield when washing the vehicle. Windshield and Wiper Blades Clean the outside of the windshield with glass cleaner. Clean rubber blades using a lint-free cloth or paper towel soaked with windshield washer fluid or a mild detergent. Wash the windshield thoroughly when cleaning the blades. Bugs, road grime, sap, and a buildup of vehicle wash/wax treatments may cause wiper streaking. Replace the wiper blades if they are worn or damaged. Damage can be caused by extreme dusty conditions, sand, salt, heat, sun, snow, and ice. Weatherstrips Apply Dielectric silicone grease on weatherstrips to make them last longer, seal better, and not stick or squeak. Lubricate weatherstrips at least once a year. Hot, dry climates


may require more frequent application. Black marks from rubber material on painted surfaces can be removed by rubbing with a clean cloth. See Recommended Fluids and Lubricants 0 313. Tires Use a stiff brush with tire cleaner to clean the tires.


Caution


Using petroleum-based tire dressing products on the vehicle may damage the paint finish and/ or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on the vehicle.


Wheels and Trim — Aluminum or Chrome Use a soft, clean cloth with mild soap and water to clean the wheels. After rinsing thoroughly with clean water, dry with a soft, clean towel. A wax may then be applied.


Vehicle Care


297


Caution


Chrome wheels and other chrome trim may be damaged if the vehicle is not washed after driving on roads that have been sprayed with magnesium, calcium, or sodium chloride. These chlorides are used on roads for conditions such as ice and dust. Always wash the chrome with soap and water after exposure.


Caution


To avoid surface damage, do not use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or chrome-plated wheels. Use only approved cleaners. Also, never drive a vehicle with aluminum or chrome-plated wheels through an automatic car wash that uses silicone carbide tire cleaning


(Continued)


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


298


Vehicle Care


Caution (Continued)


brushes. Damage could occur and the repairs would not be covered by the vehicle warranty.


Brake System Visually inspect brake lines and hoses for proper hook-up, binding, leaks, cracks, chafing, etc. Inspect disc brake pads for wear and rotors for surface condition. Inspect drum brake linings/shoes for wear or cracks. Inspect other brake parts, including drums, wheel cylinders, calipers, parking brake, master cylinder, brake fluid reservoir, vacuum pipes, electric vacuum pump including bracket, and vent hose, if equipped. Steering, Suspension, and Chassis Components Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear at least once a year.


Inspect power steering for proper hook-up, binding, leaks, cracks, chafing, etc. Visually check constant velocity joint boots and axle seals for leaks. Body Component Lubrication Lubricate all key lock cylinders, hood hinges, liftgate hinges, and the steel fuel door hinges, unless the components are plastic. Applying silicone grease on weatherstrips with a clean cloth will make them last longer, seal better, and not stick or squeak. Underbody Maintenance At least twice a year, spring and fall, use plain water to flush any corrosive materials from the underbody. Take care to thoroughly clean any areas where mud and other debris can collect. Do not directly power wash the transfer case and/or front/rear axle output seals. High pressure water can overcome the seals and contaminate the fluid. Contaminated


fluid will decrease the life of the transfer case and/or axles and should be replaced. Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body repair shop applies anti-corrosion material to parts repaired or replaced to restore corrosion protection. Original manufacturer replacement parts will provide the corrosion protection while maintaining the vehicle warranty. Finish Damage Quickly repair minor chips and scratches with touch-up materials available from your dealer to avoid corrosion. Larger areas of finish damage can be corrected in your dealer's body and paint shop. Chemical Paint Spotting Airborne pollutants can fall upon and attack painted vehicle surfaces causing blotchy, ring-shaped discolorations, and small, irregular


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


dark spots etched into the paint surface. See “Finish Care” previously in this section.


Interior Care To prevent dirt particle abrasions, regularly clean the vehicle's interior. Immediately remove any soils. Newspapers or dark garments can transfer color to the vehicle’s interior. Use a soft bristle brush to remove dust from knobs and crevices on the instrument cluster. Using a mild soap solution, immediately remove hand lotions, sunscreen, and insect repellent from all interior surfaces or permanent damage may result. Use cleaners specifically designed for the surfaces being cleaned to prevent permanent damage. Apply all cleaners directly to the cleaning cloth. Do not spray cleaners on any switches or controls. Remove cleaners quickly.


Before using cleaners, read and follow all safety instructions on the label. While cleaning the interior, open the doors and windows to get proper ventilation. To prevent damage, do not clean the interior using the following cleaners or techniques: . Never use a razor or any other


sharp object to remove soil from any interior surface.


. Never use a brush with stiff


bristles.


. Never rub any surface


aggressively or with too much pressure.


. Do not use laundry detergents or


dishwashing soaps with degreasers. For liquid cleaners, use approximately 20 drops per 3.8 L (1 gal) of water. A concentrated soap solution will create streaks and attract dirt. Do not use solutions that contain strong or caustic soap.


. Do not heavily saturate the upholstery when cleaning.


Vehicle Care


299


. Do not use solvents or cleaners


containing solvents.


Interior Glass To clean, use a terry cloth fabric dampened with water. Wipe droplets left behind with a clean dry cloth. If necessary, use a commercial glass cleaner after cleaning with plain water.


Caution


To prevent scratching, never use abrasive cleaners on automotive glass. Abrasive cleaners or aggressive cleaning may damage the rear window defogger.


Cleaning the windshield with water during the first three to six months of ownership will reduce tendency to fog. Speaker Covers Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with water and mild soap.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


300


Vehicle Care


Coated Moldings Coated moldings should be cleaned. . When lightly soiled, wipe with a


sponge or soft, lint-free cloth dampened with water.


. When heavily soiled, use warm


soapy water.


Fabric/Carpet/Suede Start by vacuuming the surface using a soft brush attachment. If a rotating vacuum brush attachment is being used, only use it on the floor carpet. Before cleaning, gently remove as much of the soil as possible: . Gently blot liquids with a paper towel. Continue blotting until no more soil can be removed.


. For solid soils, remove as much as possible prior to vacuuming.


To clean: 1. Saturate a clean, lint-free colorfast cloth with water. Microfiber cloth is recommended to prevent lint transfer to the fabric or carpet.


2. Remove excess moisture by


gently wringing until water does not drip from the cleaning cloth. 3. Start on the outside edge of the


soil and gently rub toward the center. Fold the cleaning cloth to a clean area frequently to prevent forcing the soil in to the fabric.


4. Continue gently rubbing the soiled area until there is no longer any color transfer from the soil to the cleaning cloth. If the soil is not completely removed, use a mild soap solution followed only by plain water.


5.


If the soil is not completely removed, it may be necessary to use a commercial upholstery cleaner or spot lifter. Test a small hidden area for colorfastness before using a commercial upholstery cleaner or spot lifter. If ring formation occurs, clean the entire fabric or carpet. After cleaning, use a paper towel to blot excess moisture.


Cleaning High Gloss Surfaces and Vehicle Information and Radio Displays Use a microfiber cloth on high gloss surfaces or vehicle displays. First, use a soft bristle brush to remove dirt that can scratch the surface. Then gently clean by rubbing with a microfiber cloth. Never use window cleaners or solvents. Periodically hand wash the microfiber cloth separately, using mild soap. Do not use bleach or fabric softener. Rinse thoroughly and air dry before next use.


Caution


Do not attach a device with a suction cup to the display. This may cause damage and would not be covered by the vehicle warranty.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Instrument Panel, Leather, Vinyl, Other Plastic Surfaces, Low Gloss Paint Surfaces, and Natural Open Pore Wood Surfaces Use a soft microfiber cloth dampened with water to remove dust and loose dirt. For a more thorough cleaning, use a soft microfiber cloth dampened with a mild soap solution.


Caution (Continued)


the appearance and feel of leather or soft trim, and are not recommended.


Do not use cleaners that increase gloss, especially on the instrument panel. Reflected glare can decrease visibility through the windshield under certain conditions.


Caution


Caution


Soaking or saturating leather, especially perforated leather, as well as other interior surfaces, may cause permanent damage. Wipe excess moisture from these surfaces after cleaning and allow them to dry naturally. Never use heat, steam, or spot removers. Do not use cleaners that contain silicone or wax-based products. Cleaners containing these solvents can permanently change (Continued)


Use of air fresheners may cause permanent damage to plastics and painted surfaces. If an air freshener comes in contact with any plastic or painted surface in the vehicle, blot immediately and clean with a soft cloth dampened with a mild soap solution. Damage caused by air fresheners would not be covered by the vehicle warranty.


Vehicle Care


301


Cargo Cover and Convenience Net Wash with warm water and mild detergent. Do not use chlorine bleach. Rinse with cold water, and then dry completely. Care of Safety Belts Keep belts clean and dry. { Warning


Do not bleach or dye safety belts. It may severely weaken them. In a crash, they might not be able to provide adequate protection. Clean safety belts only with mild soap and lukewarm water.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


302


Vehicle Care


Floor Mats


{ Warning


If a floor mat is the wrong size or is not properly installed, it can interfere with the pedals. Interference with the pedals can cause unintended acceleration and/or increased stopping distance which can cause a crash and injury. Make sure the floor mat does not interfere with the pedals.


Use the following guidelines for proper floor mat usage: . The original equipment floor mats were designed for your vehicle. If the floor mats need replacing, it is recommended that GM certified floor mats be purchased. Non-GM floor mats may not fit properly and may interfere with the pedals. Always check that the floor mats do not interfere with the pedals.


Removing and Replacing the Floor Mats Pull up on the rear of the floor mat to unlock each retainer and remove.


. Do not use a floor mat if the


vehicle is not equipped with a floor mat retainer on the driver side floor.


. Use the floor mat with the


correct side up. Do not turn it over.


. Do not place anything on top of


the driver side floor mat.


. Use only a single floor mat on


the driver side.


. Do not place one floor mat on


top of another.


Reinstall by lining up the floor mat retainer openings over the carpet retainers and snap into position. Make sure the floor mat is properly secured in place. Verify the floor mat does not interfere with the pedals.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Service and Maintenance


303


Recommended Fluids, Lubricants, and Parts


Recommended Fluids and


Lubricants . . . . . . . . . . . . . . . . . . . 313


Maintenance Replacement


Parts . . . . . . . . . . . . . . . . . . . . . . . . 314


Maintenance Records


Maintenance Records . . . . . . . . 315


Service and Maintenance


General Information


General Information . . . . . . . . . . 303


Maintenance Schedule


Maintenance Schedule . . . . . . . 305


Special Application Services


Special Application


Services . . . . . . . . . . . . . . . . . . . . 310


Additional Maintenance and Care


Additional Maintenance


and Care . . . . . . . . . . . . . . . . . . . . 310


General Information Your vehicle is an important investment. This section describes the required maintenance for the vehicle. Follow this schedule to help protect against major repair expenses resulting from neglect or inadequate maintenance. It may also help to maintain the value of the vehicle if it is sold. It is the responsibility of the owner to have all required maintenance performed. Your dealer has trained technicians who can perform required maintenance using genuine replacement parts. They have up-to-date tools and equipment for fast and accurate diagnostics. Many dealers have extended evening and Saturday hours, courtesy transportation, and online scheduling to assist with service needs.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


304


Service and Maintenance


Your dealer recognizes the importance of providing competitively priced maintenance and repair services. With trained technicians, the dealer is the place for routine maintenance such as oil changes and tire rotations and additional maintenance items like tires, brakes, batteries, and wiper blades.


Caution


Damage caused by improper maintenance can lead to costly repairs and may not be covered by the vehicle warranty. Maintenance intervals, checks, inspections, recommended fluids, and lubricants are important to keep the vehicle in good working condition.


The Tire Rotation and Required Services are the responsibility of the vehicle owner. It is recommended to have your dealer perform these services every 12 000 km/7,500 mi. Proper vehicle maintenance helps to


keep the vehicle in good working condition, improves fuel economy, and reduces vehicle emissions. Because of the way people use vehicles, maintenance needs vary. There may need to be more frequent checks and services. The Additional Required Services - Normal are for vehicles that: . Carry passengers and cargo within recommended limits on the Tire and Loading Information label. See Vehicle Load Limits 0 181.


. Are driven on reasonable road


surfaces within legal driving limits.


. Use the recommended fuel. See


Fuel 0 216.


Refer to the information in the Maintenance Schedule Additional Required Services - Normal chart. The Additional Required Services - Severe are for vehicles that are: . Mainly driven in heavy city traffic


in hot weather.


. Mainly driven in hilly or


mountainous terrain.


. Frequently towing a trailer. . Used for high speed or


competitive driving.


. Used for taxi, police, or delivery


service.


Refer to the information in the Maintenance Schedule Additional Required Services - Severe chart.


{ Warning


Performing maintenance work can be dangerous and can cause serious injury. Perform maintenance work only if the required information, proper tools, and equipment are available. If they are not, see your dealer to have a trained technician do the work. See Doing Your Own Service Work 0 228.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


Service and Maintenance


305


Maintenance Schedule


Owner Checks and Services


At Each Fuel Stop . Check the engine oil level. See


Engine Oil 0 233.


Once a Month . Check the tire inflation


pressures. See Tire Pressure 0 268. Inspect the tires for wear. See Tire Inspection 0 273.


. Check the windshield washer fluid level. See Washer Fluid 0 243.


Engine Oil Change When the CHANGE ENGINE OIL SOON message displays, have the engine oil and filter changed within the next 1 000 km/600 mi. If driven under the best conditions, the engine oil life system may not indicate the need for vehicle service for up to a year. The engine oil and filter must be changed at least once


a year and the oil life system must be reset. Your trained dealer technician can perform this work. If the engine oil life system is reset accidentally, service the vehicle within 5 000 km/3,000 mi since the last service. Reset the oil life system when the oil is changed. See Engine Oil Life System 0 235. Tire Rotation and Required Services Every 12 000 km/ 7,500 mi Rotate the tires, if recommended for the vehicle, and perform the following services. See Tire Rotation 0 274. . Check engine oil level and oil


life percentage. If needed, change engine oil and filter, and reset oil life system. See Engine Oil 0 233 and Engine Oil Life System 0 235.


. Check engine coolant level. See


Engine Coolant 0 239.


. Check windshield washer fluid level. See Washer Fluid 0 243.


. Visually inspect windshield wiper


blades for wear, cracking, or contamination and replace worn or damaged blades. See Exterior Care 0 294. Replace wiper blades every 20 000 km/ 12,000 mi or 12 months. See Wiper Blade Replacement 0 248.


. Check tire inflation pressures.


See Tire Pressure 0 268. Inspect tire wear. See Tire Inspection 0 273.


. Visually check for fluid leaks.


Inspect engine air cleaner filter. See Engine Air Cleaner/Filter 0 237. Inspect brake system. See Exterior Care 0 294.


. Visually inspect steering, suspension, and chassis components for damaged, loose, or missing parts or signs of wear. See Exterior Care 0 294.


. Check restraint system


components. See Safety System Check 0 60.


Buick Verano Owner Manual 9085356) - 2016 - CRC - 5/20/15


(GMNA-Localizing-U.S./Canada/Mexico-


306


Service and Maintenance


. Visually inspect fuel system for


. Check accelerator pedal for


damage, high effort, or binding. Replace if needed.


. Visually inspect gas strut for


signs of wear, cracks, or other damage. Check the hold open ability of the strut. See your dealer if service is required. Inspect sunroof track and seal, if equipped. See Sunroof 0 46.


damage or leaks.

Loading...
x