Login- Download PDF Manual
-
When the LEDs stop flashing rapidly, the CD/ DVD changer is once more operational.
Self-recorded CDs/DVDs Possible reasons for malfunctions with self- recorded CDs/DVDs are, e.g., inconsistent data-creation or recording processes, or poor quality or high age of the CD/DVD blank. Only label CDs/DVDs on the upper side with a pen intended for this purpose.
Avoiding damage Avoid fingerprints, dust, scratches and mois- ture. Store CDs/DVDs in a sleeve. Do not subject CDs/DVDs to temperatures over 1227/506, high levels of humidity or direct sunlight.
CDs/DVDs with copy protection CDs/DVDs are often provided with a copy pro- tection feature by the manufacturer. This can mean that some CDs/DVDs cannot be played or can only be played to a limited extent.
Care If necessary, clean the reflective scanning side of the CDs/DVDs with a commercially available cleaning cloth by wiping in straight lines from the center outward. For additional information on the care of CDs/DVDs, refer to the Caring for your vehicle brochure.
Notes
BMW CD/DVD players and changers are officially designated Class 1 laser prod- ucts. Do not operate if the cover is damaged, otherwise severe eye damage can result. Do not use self-recorded CDs/DVDs with labels applied as these can become detached during playback due to heat buildup and can cause irreparable damage to the device. Only use round CDs/DVDs with a standard diameter of 4.7 in/12 cm and do not play CDs/ DVDs with an adapter, e.g. CD singles, as other- wise the CD/DVD or the adapter can jam and may no longer eject properly. Do not use a combined CD/DVD, e.g. DVDPlus, otherwise the CD/DVD can jam and will no longer eject.<
General malfunctions BMW CD/DVD changers and players have been optimized for performance in vehicles. In some instances they may be more sensitive to faulty CDs/DVDs than stationary devices would be. If a CD/DVD cannot be played, first check if it has been inserted correctly.
Humidity High levels of humidity can lead to condensa- tion on the CD/DVD or the laser's scan lens and temporarily prevent playback.
Malfunctions with individual CDs/DVDs If malfunctions occur only with particular CDs/ DVDs, this can be due to one of the following causes.
Filling the CD/DVD changer or removing CDs/DVDs If all of the LEDs on the CD/DVD changer flash rapidly, then a malfunction is occurring. To rectify the malfunction: 1. Press the
button.
The CD/DVD last inserted is ejected.
2. Remove the CD/DVD.
180
DVD changer
Installation position
The BMW DVD changer for six DVDs is installed in the glove compartment.
Controls and displays
1 LEDs on the DVD bay
Flash when the DVD can be inserted.
2 Buttons for DVD compartments
The LED lights up when DVD compartment is filled.
Filling the DVD changer 1. Press the
button.
The LED on the first empty compartment flashes.
2. Select another DVD compartment if neces-
sary: Press the
...
button.
3. When the LEDs 1 on the DVD bay flash,
insert an individual DVD. The DVD is automatically pulled in and inserted into the selected DVD compart- ment.
Do not push in the DVD until the LEDs 1 on the DVD bay are flashing;
otherwise, the DVD or the DVD changer may be damaged. Do not continue to push on the DVD; this may cause it to jam and prevent it from being able to eject again.<
4. To fill additional DVD compartments:
Repeat steps 1 to 3.
Filling empty DVD compartments 1. Hold down the
button.
The LEDs on the empty DVD compart- ments flash.
2. When the LEDs 1 on the DVD bay flash,
insert an individual DVD. The DVD is automatically pulled in and inserted into the first available DVD com- partment.
Do not continue to push on the DVDs; this may cause them to jam and pre- vent them from being able to eject again.< 3. Wait until the DVD has been pulled in and
the LEDs 1 on the DVD bay are flashing again.
Do not push in the DVD until the LEDs 1 on the DVD bay are flashing;
otherwise, the DVD or the DVD changer may be damaged.<
4. To fill additional DVD compartments:
Repeat steps 2 and 3.
Removing DVDs from the DVD changer 1. Press the 2. Press the
button in order to
button.
...
select the DVD compartment. The DVD is pushed partway out of the DVD changer.
3. Remove the DVD.
If the DVD is not removed, it is pulled back in again after about 10 seconds.<
181
Playing DVDs Depending on the equipment in your vehicle, you have the option of playing back both the audio track and video track of DVDs or only their audio track. > Vehicles with two drives: audio and video
playback
> Vehicles with a single drive: audio playback,
refer to page 186
Audio and video playback For your own safety, the picture only appears in the Control Display at speeds of up to about 2 mph/3 km/h. For certain national-market ver- sions, the picture does not appear in the Control Display unless the vehicle is stopped and the transmission is in Park. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
3. Change to upper field if necessary. Select
"DVD" and press the controller.
4. Switch into the second field if necessary, select the desired DVD and press the con- troller.
Removing all DVDs from the DVD changer 1. Hold down the
button.
The DVDs are pushed partway out of the DVD changer in sequence.
2. Remove the DVDs individually.
Malfunctions If all of the LEDs on the DVD changer flash rap- idly, then a malfunction is occurring. In this case, proceed as follows. 1. Press the
button or
button.
The DVD last inserted is ejected.
2. Remove the DVD. The DVD changer tests the DVD compartments and the rapid flashing of the LEDs stops. The DVD changer is once more operational.
DVD country codes Your DVD player only plays DVDs with the cod- ing of your home region, e.g. Europe = 2. The country codes supported by your DVD are con- tained in the information on your DVD. It is not possible to change this coding. An overview of the six coding zones:
Code
Region USA, Canada Japan, Europe, Middle East, South Africa Southeast Asia Australia, Central and South America, New Zealand Northwest Asia, North Africa China
DVDs with the code 0 can be played back on all units.<
It can take a little time for the DVD contents to be scanned in. Then the DVD is played and the DVD-specific menu is displayed.
182
DVD control Using the DVD control, you can select the title and chapter, open the DVD-specific menu and operate functions such as language, fast for- ward and reverse, or freeze frame. A DVD can briefly deactivate functions of the DVD control, under certain circumstances even while the entire DVD is being played. It is not possible to operate the DVD control under these circumstances. In this case, try to make the selection using the DVD-specific menu. During playback: 1. Press the controller. 2. Select "DVD control bar" if needed and
press the controller.
The DVD control is displayed.
The DVD control disappears again after a short time if you have not selected a function.
Function Exit DVD control Settings for playing DVD
"SET"
Start playback Stop playback Activating freeze frame Skip chapter Fast forward/reverse Open DVD-specific menu
"Menu"
Fast forward/reverse
Forward/reverse with DVD control 1. Press the controller during playback to hide
the DVD control.
2. Select the controller.
symbol and press the
3. Press the controller repeatedly to increase
the speed of the fast forward/reverse. The DVD playback will be distorted.
To cancel fast forward/reverse: Select the The DVD will start play at the point selected.
symbol and press the controller.
Forward/reverse using the controller 1. Turn the controller during playback. Fast forward/reverse is interrupted.
2. Turn the controller further.
The speed is increased. 3. Release the controller.
Fast forward/reverse is interrupted. The current DVD will start play at the point selected.
Skip chapter You can change to the next or previous chapter during playback. 1. Press the controller during playback to hide
the DVD control.
2. Select the
symbol and press
repeatedly until you reach the desired chap- ter.
Or: Press the repeatedly until you reach the desired chapter.
button on the left or right
Making settings for DVD
With some DVDs, it is only possible to select language, subtitles, camera angle,
or title by using the DVD-specific menu. Refer to the information on your DVD for possi- ble selections.<
183
r
Tone control In DVDs with multichannel or surround sound, for optimum playback, select an audio track with multichannel sound and set the tone set- tings to Surround, refer to Selecting language on page 184 and Professional HiFi System* on page 165.
Adjusting brightness and contrast 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "Video settings" and press the con-
troller.
Resetting to defaults: Select "Reset" and press the controller.
DVD format 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "DVD format" and press the control-
ler.
4. Select "Brightness" or "Contrast" and
press the controller.
> "Standard" > "Zoom": full-screen playback.
Selecting language 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "Language" and press the controller. 4. Select language or audio track and press
the controller.
5. Turn the controller until the desired setting
is selected.
184
The languages and audio tracks are generally accompanied by an indication of how may channels are included. 5.1 means multichannel.
Selecting subtitling 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "Subtitles" and press the controller. 4. Select the language of the subtitles and
confirm by pressing the controller.
Opening DVD-specific menu Additional functions may be available on DVDs. For example, the viewer can select from several possible plots or display information on the film. 1. Press the controller during playback. 2. Select "Menu" and press the controller.
3. Make your selection in the DVD-specific
menu. To do so, move the controller in the corresponding direction in order to select the menu items and then press the control- ler.
4. Select "Confirm selection" and press the
controller.
You can also select language, subtitles, camera angle, or title in the DVD-specific
menu. Refer to the information on your DVD for possi- ble selections.<
Closing the settings menu > Select "Return" and press the controller.
Selecting title 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "Title" and press the controller. 4. Select the desired title.
Changing viewing angle Notes or symbols that appear during the play- back of a film generally indicate the availability of different camera angles. These are usually only briefly available. 1. Press the controller during playback. 2. Select "SET" and press the controller. 3. Select "Angle of view" and press the con-
troller.
185
r
Audio playback In vehicles equipped with a single drive, you have the option of playing back the audio track of a DVD, even when no video playback is pos- sible in the vehicle. 1. button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
3. Change to upper field if necessary. Select
"DVD" and press the controller.
4. Switch into the second field if necessary, select the desired DVD and press the con- troller.
Chapter 06 of the selection corresponds to chapter 4 in title 1 of the DVD.
Display in the status line Display in
Title 1
Title 2
Title 3
Chapter 1
Chapter 2
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 1
Chapter 2the chapter selection 01
02
03
04
05
06
07
08Since the first title is not played automatically, the display in the chapter selection can begin with a higher number than 01.
The behavior during playback of the DVD can differ, depending on the DVD. It may not be possible to play some DVDs or the play- back may stop before the end. In this case, the system usually skips to the next DVD in the DVD changer.<
Selecting chapter Select the chapter by turning the controller.
If playback does not automatically continue after the end of a title, then use the controller to select the next chapter. A maximum of 99 chapters of a DVD can be played back.
Displaying DVD audio contents DVDs are usually divided into titles that are divided into chapters. The playback begins with the title that contains the most chapters. For example, this has the advantage that the intro- duction of a DVD is not played first. All of the chapters, numbered all the way through, are show, i.e. the numbering is differ- ent than on the DVD. The numbering of the DVD is displayed in the status line. Example:
186
Notes The DVD changer can play back the following formats: > DVD video > Video CD > CD-DA > CD-DTS > Compressed audio files
MACROVISION This product includes copyright-protected technology that is based on a series of regis- tered US patents and the intellectual property of the Macrovision Corporation and other man- ufacturers. Use of this copyrighted material must be approved by Macrovision. Unless oth- erwise agreed upon with Macrovision, it is only permissible for correspondingly protected media to be produced for private use. The copying of this technology is strictly forbidden.
Dolby Manufactured under license from Dolby Labo- ratories. "Dolby", "Pro Logic", "MLP Lossless" and the double-D symbol are registered trademarks of Dolby Laboratories.
DTS "DTS" and "DTS Digital Surround" are regis- tered trademarks of DTS, Inc.
Tone control In DVDs with multichannel or surround sound, for optimum playback, select an audio track with multichannel sound, refer to Selecting audio language, and set the tone settings to Surround, refer to Professional HiFi System* on page 165.
Selecting audio language If there are different languages on a DVD, you can select the language. 1. Select "Set" and press the controller.
Other menu items are displayed.
2. Select "Language / Audio format" and press
the controller.
The different languages of the DVD are dis- played.
3. Select the desired language and press the
controller.
The languages and audio tracks are generally accompanied by an indication of how may channels are included. 5.1 means multichannel.
187
AUX-In connection
You can connect an external audio device, e.g. an MP3 player, and play the sound via the vehi- cle loudspeakers. The sound can be adjusted via iDrive.
Connecting Open the lid of the center armrest.
Starting audio playback The audio device must be switched on.
Via iDrive iDrive, for operating principle refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
3. Change to upper field if necessary. Turn the controller until "AUX" is selected and press the controller.
1 Connection for audio playback:
TRS connector 1/8 in/3.5 mm
To play audio tracks through the car's loud- speaker system, connect the headphone or line-out port of the device with the AUX-In con- nection.
4. Select "AUX IN" and press the controller. 5. Adjust volume and sound if necessary.
With programmable memory/ direct selection buttons You can save the function "AUX" on the pro- grammable memory/direct selection buttons to start audio playback, refer to page 21.
188
USB audio interface
You can connect audio devices to the USB audio interface, e.g. an iPod or a USB device (MP3 player, USB memory stick). You can then operate these with iDrive. The common audio files, e.g. MP3, WMA, WAV (PCM) and AAC, as well as playback lists in the M3U format can be played back. Due to the large number of audio devices avail- able on the market, operation via the vehicle cannot be ensured for every audio device. Ask your BMW Sports Activity Vehicle Center which audio devices are suitable.
Connecting Open the lid of the center armrest.
1 Connection for audio playback:
TRS connector 1/8 in/3.5 mm
2 USB interface
iPod To connect the iPod, use the BMW cable adapter for Apple iPods. For more information, please contact a BMW Sports Activity Vehicle Center or consult our website: www.bmw.com For audio playback via the vehicle loudspeak- ers, connect the iPod to the connections 1 and 2. The menu structure of the iPod is supported by the USB audio interface.
USB device
Use a flexible adapter cable for connec- tion to protect the USB interface and your
USB device against mechanical damage.< For audio playback via the vehicle loudspeak- ers, connect the USB device to the connec- tion 2. After connecting for the first time, the informa- tion of all tracks (e.g. artist, music genres) and the playback lists of the USB device are trans- ferred to the vehicle. This process can take some time. The time required is dependent on the USB device and on the number of tracks. During the transfer you can select the tracks via the directories and file names. Following the transfer you can call up the tracks via the information and playback lists. The information of up to four USB devices or for a total of approx. 20,000 tracks can be stored in the vehicle. If a fifth USB device is connected or if more than 20,000 tracks are to be stored, then the infor- mation about existing tracks is deleted if neces- sary.
Music tracks with integrated Digital Rights Management (DRM) cannot be
played.<
189
e
Starting audio playback
Via iDrive If the audio device has a device name, this will be displayed if possible. 1. Press the
button.
This opens the start menu.
Selecting a track You can call up the tracks via the playback lists and information. With USB devices you can also call up the tracks via the file directory. The titles can be displayed if they are stored in the Latin alphabet. 1. Make your selection, e.g. "Playlists" or
2. Move the controller backwards to open
"Artists", and press the controller.
"Entertainment".
3. Change to upper field if necessary. Turn the controller until "AUX" is selected and press the controller.
4. Select "USB" or the name of the audio
device and press the controller.
2. Select the track and press the controller.
Displaying information on track You can display any information stored on the current track, e.g. the name of the artist. 1. Press the controller during playback. 2. Select "Details" and press the controller.
The playback starts with the first track.
With programmable memory/ direct selection buttons You can save the function "USB" on the pro- grammable memory/direct selection buttons to start audio playback, refer to page 21.
The information for the current track are dis- played.
190
Notes
Do not subject the audio device to extreme environmental conditions, e.g.
extremely high temperatures, refer to the oper- ating instructions of the audio device. Other- wise the audio device may be damaged, impair- ing driving safety while driving.< Depending on the configuration of the audio files, e.g. bit rates greater than 256 Kbit/s, proper playback cannot always be ensured.
Information on connection > The USB audio interface supplies the con- nected audio device with power, provided the audio device supports this function. Therefore, do not connect the USB audio device to a socket in the vehicle during operation.
> Do not use force when plugging the con-
nector into the USB interface.
> Do not connect any devices, e.g. fans or
lamps, to the USB audio interface.
> Do not connect USB hard disks. > Do not use the audio interface to recharge
external devices.
Repeating a track 1. Select the current track and press the con-
troller.
2. Select "Repeat track" and press the con-
troller.
To stop repeating: 1. Press the controller. 2. Select "Repeat track" and press the con-
troller.
Random play sequence You can play back the tracks of the selected list in random order, e.g. all tracks of an artist. 1. Select the current track and press the con-
troller.
2. Select "Random" and press the controller. To end random playback: 1. Press the controller. 2. Select "Random" and press the controller.
Fast forward/reverse Buttons on the steering wheel or on the CD player: Press and hold the sponding direction.
button for the corre-
191
r
DVD system in rear
With the DVD system in the rear you can play CDs and DVDs with audio, video and image data. External audio and video devices can also be connected and played via the DVD system in the rear. Tone output is possible both via headphones and via the vehicle loudspeakers. You can operate the DVD system in the rear with the buttons on the CD/DVD player or with the remote control.
Some functions can only be operated with the remote control.<
Enabling DVD system Enable the DVD system with iDrive. For operat- ing principle refer to page 16. button. 1. Press the
This opens the start menu.
2. Press the controller to open the 3. Select "Settings" and press the controller. 4. Select "Unlock rear menu" and press the
menu.
controller.
5. Select "Rear enabled" and press the con-
troller.
The DVD system is enabled.
192
Controls
1 Display screen 2 Infrared interface for headphones 3 CD/DVD player 4 Headphone connection: Jack plug 1/8 in/3.5 mm
5 12 V sockets, refer to page 122
Folding in display screen When using the ski bag or when transporting bulky pieces of luggage, the display screen should be folded in, as otherwise it may be dam- aged.
Do not open the covers of the center arm- rest or rest your arm on the display screen with the display screen folded in, as otherwise the display screen may be damaged.<
1. Turn display screen, arrow 1.
The display screen switches off. 2. Fold in display screen, arrow 2. The display screen is folded out in the reverse order.
CD/DVD player
Controls
1 Press: switching DVD system on/off Turn: volume for headphones on left
2 Eject CD, DVD
Start of track, reverse Stop Playback, pause, hold screen Next track, fast forward
4 CD/DVD bay 5 Connection for external device:
Cinch sockets with protective cap
6 Press: switching DVD system on/off
Turn: volume for headphones on right
Connecting headphones You can connect headphones with a jack plug 1/8 in/3.5 mm or operate them using the infra- red interface. Ask your BMW Sports Activity Vehicle Center which infrared headphones are supported by the infrared interface.
When using infrared headphones, the infrared connection between the head- phones and the infrared interface may not be interrupted. This means that no obstacle may be located between them and the cover of the infrared interface may not be covered or scratched. Unfavorable lighting conditions, such as glaring ambient light, can result in poor reception.<
Remote control
1 Menu navigation 2 Volume for headphones with jack plug 3 Change track or chapter with CD or DVD
playback, fast forward/reverse
4 Switch over headphones right/left 5 Open start menu for DVD system
Menu navigation You can navigate through the menus with the knurled wheel 1 and the buttons 1. For operat- ing principle also refer to iDrive, page 16. > Turn the knurled wheel 1:
Selecting a menu item.
> Press buttons 1:
Changing between fields.
193
r
> Press the
button:
Activating menu item.
Changing batteries
3. Select "AUX / Rear" and press the control-
ler.
Switching DVD system on/off Press the button on the CD/DVD player. The DVD system switches on automatically when a CD or DVD is inserted.
Playing CD/DVD The menu item with which the contents of the CD/DVD can be called up is dependent on the data on a CD or DVD: > Video data via "DVD" > Audio data via "CD" > Images via "Photo"
1. Press the detent and remove the cover. 2. Change the batteries. The type and installa-
tion position are marked on the bottom of the battery compartment.
3. Close the cover.
Return used batteries to a recycling col- lection point or to your BMW Sports
Activity Vehicle Center.<
Sound output via loudspeakers In addition to the headphones, you can also play the sound via the vehicle loudspeakers. As soon as a plug is inserted in the AUX-In con- nection in the center console, the sound output of the DVD system via the vehicle loudspeakers is interrupted. iDrive, for operating principle refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
194
Playing videos from CD/DVD
Country codes of DVDs Your DVD player only plays DVDs with the cod- ing of your home region, e.g. Europe = 2. The country codes supported by your DVD are con- tained in the information on your DVD. An overview of the coding zones:
Code
Region USA, Canada Japan, Europe, Middle East, South Africa Southeast Asia Australia, Central and South America, New Zealand Northwest Asia, North Africa China
Starting playback 1. Push the CD/DVD into the drive with the
labeled side facing upward. The CD/DVD is automatically pulled in. > Playback usually begins automatically
after a few seconds.
> If playback does not begin automatically:
Select "DVD". Press the
button.
2.
If the DVD control or the DVD-specific menu is displayed for a DVD, select the desired option for menu guidance with the remote control buttons. Or: Press the
button on the CD/DVD player. You can control the playback with the buttons on the CD/DVD player or the DVD control.
Video CDs, VCD, and Super Video CDs, SVCD, can be played like DVDs if they do
not have a DVD menu of their own.<
Ejecting CD/DVD Press the button on the CD/DVD player. The DVD emerges slightly from the drive.
DVD control With the DVD control, you can select the track and chapter, open the DVD-specific menu and operate functions such as Language, Fast for- ward and Reverse or Freeze frame. A DVD can briefly deactivate functions of the DVD control, under certain circumstances while the entire DVD is being played. It is not possible to operate the DVD control under these circum- stances. In this case, try to make the selection using the DVD-specific menu. 1. Press the
button on the remote con-
trol during playback.
2. Press the
buttons on the remote control
or turn the knurled wheel to select the desired function.
3. Press the
button.
Function Exit DVD control Settings for playing DVD
"SET"
Start playback Stop playback Activate and deactivate freeze frame Skip chapter Fast forward/reverse Open DVD-specific menu
"Menu"
The DVD control disappears again after a short time if you have not selected a function. Or: Press the to exit the DVD control.
button on the remote control
195
r
Fast forward/reverse
Forward/reverse with DVD control 1. Press the
button on the remote con-
trol during playback.
2. Select the 3. Press the 4. Press the
symbol.
button. button several times to
increase the fast forward/reverse speed.
The DVD playback will be distorted. To cancel fast forward/reverse: 1. Select the 2. Press the Or: Press the button on the CD/DVD player. The DVD will start play at the point selected.
symbol. button.
Forward/reverse with remote control Press and hold the the desired point. Or: 1. During playback, turn the knurled wheel.
button until you reach
Fast forward/reverse is interrupted. 2. Continue to turn the knurled wheel.
The speed is increased.
3. Press the
button on the CD/DVD player.
Fast forward/reverse is interrupted.
The DVD will start play at the point selected.
Skipping chapter You can change to the next or previous chapter during playback. 1. Press the
button on the remote con-
trol during playback.
2. Select the 3. Press the
symbol.
button repeatedly, continuing
until you reach the desired chapter.
Or: Press the remote control repeatedly until you reach the desired chapter.
button on the left or right on the
196
Freeze frame 1. Press the
button on the remote con-
trol during playback.
symbol. button.
2. Select the 3. Press the To continue playback: 1. Select the 2. Press the As an alternative you can also stop and con- tinue playback with the DVD player.
or button.
symbol.
button on the CD/
Making settings for DVD 1. Press the
button during playback.
2. Make the settings with the remote control: > "Video settings":
> "Brightness", "Color" and "Contrast" of
screen display
> Additional settings can be made after
changing to the top field. "Language": system language of DVD system in rear. "Display": background brightness of screen.
> "Tone":
> "Treble / Bass" and "Balance":
Separately adjustable for the left and right-hand headphones and the infrared headphones.
> "Reset":
The settings are reset to the default value.
> "DVD format": > "Standard" > "Zoom": full-screen playback.
> "Language":
Language or sound track of DVD playback. The language advances one setting each time the menu item is selected.
> "Subtitles":
Language of subtitles "00 n/a": no subtitles.
> "Title":
Selection of a single track of the DVD.
> "Angle of view":
Camera angle Notes or symbols that appear during the playback of a film generally point out differ- ent camera angles. These are usually only briefly available.
> "Menu":
Call up the DVD-specific menu.
> "Return":
Exit menu or: Press the trol.
buttons on the remote con-
Many DVDs offer dialogs and subtitles in vari- ous languages or scene descriptions for the hearing impaired. These functions are stored on the DVD.
With some DVDs, it is only possible to select language, subtitles, camera angle,
or track by using the DVD-specific menu. Refer to the information on your DVD for possi- ble selections. Entries marked in gray in the menus cannot be selected.<
Opening DVD-specific menu Additional functions may be available on DVDs. For example, it is possible to select from several possible plots or display information on the film. button on the remote con-
