Login- Download PDF Manual
-
2. Select the entry and press the controller. To start the destination guidance: Select "Start guidance" and press the control- ler.
Deleting individual destinations from address book 1. Select "Address book" and press the con-
troller.
2. Select the entry and press the controller. 3. Select "Delete address" and press the con-
troller.
Changing destinations from address book 1. Select "Address book" and press the con-
troller.
2. Select the entry and press the controller. 3. Select "Edit address" and press the con-
troller.
4. Change entry.
For operation, refer to Entering a destina- tion manually, page 131.
5. Select "Store in address book" and press
the controller.
Deleting all destinations from address book 1. Open the start menu. 2. Press the controller to open the 3. Select "Settings" and press the controller. 4. Select "Vehicle and tires" and press the
menu.
controller.
5. Select "Delete data" and press the control-
ler.
6. Select "Delete address book" and press the
controller.
7. Select "Yes" and press the controller.
140
Home address You can store your current position or the cur- rent destination as the home address in the address book. This entry occupies the second position in the address book.
Storing home address 1. Select "Address book" and press the con-
troller.
2. Change into the third field from the top.
Turn the controller until "Home address" is selected and press the controller.
3. Select "Use current location as address", or "Save current destination" during the desti- nation guidance, and press the controller.
4. With Professional navigation system:
Select "Store in address book" and press the controller.
Applying home address as destination 1. Select "Home address" and press the con-
troller.
2. Select "Start guidance" and press the con-
troller.
Changing home address 1. Select "Home address" and press the con-
troller.
2. Select "Edit address" and press the con- troller. For operation, refer to Entering a destination manually, page 131.
Selecting route You can influence the calculated route by choosing certain route criteria. You can change the route criteria as often as you like while entering the destination and whenever the des- tination guidance is active. The route is planned according to fixed rules. The type of road is taken into account, e.g. whether it is a highway or a winding road. The road types are stored on the navigation DVD. As a result, the routes recommended by the navigation system may not always be the same ones that you would choose based on personal experience.
Changing route criteria 1. Select "Navigation" and press the control-
ler.
2. Change into the third field from the top.
Turn the controller until "Route preference" is selected and press the controller.
The various criteria are listed on the Control Display.
3. Select a route criterion for the route:
> "With highways"
Highways and major traffic arteries are given priority
> "Avoid highways"
Highways are avoided where possible
> "Fast route"
The short traveling time, being a combi- nation of the shortest possible route and the fastest roads
> "Short route"
Short route, irrespective of how fast or slow progress will be
141
Word matching principle The system supports the word matching princi- ple to make it easier for you to enter the names of streets or towns/cities. The system runs ongoing checks, comparing your destination entries with the data stored on the navigation DVD as the basis for instant response. The user benefits include: > Names of specific locations can also vary from the official versions if you are using a spelling that is customary in another coun- try. Example: Instead of "München", you can also enter the English spelling "Munich" or the Italian spelling "Monaco".
> When you are entering the names of towns/ cities and streets the system will complete them automatically as soon as enough let- ters are available to ensure unambiguous identification.
> The system only accepts name entries
beginning with letters that are stored on the navigation DVD. The system will not accept non existent names and addresses.
4. Press the controller.
The route criterion is highlighted.
5.
If necessary, select an additional route cri- terion and then press the controller: > "Dynamic route"
Automatic changing of the route in case of traffic obstructions. Depending on the type of road and the nature and length of the traffic obstruction, the route can also be calculated so that you travel through the traffic obstruction.
> "Avoid tollroads"
Tollroads are avoided where possible.
> "Avoid ferries"
Ferries are avoided where possible.
To exit the menu:
Select the arrow and press the controller. The route criteria can also be changed in the arrow or map display. 1. Select the symbol for the route criterion and
press the controller.
2. Select a route criterion and press the con-
troller.
142
Destination guidance
Starting destination guidance
Via iDrive iDrive, for explanation of concept, refer to page 16. 1. Change to upper field if necessary. Turn the controller until "Navigation" is selected and press the controller.
2. Select a destination from the destination list and press the controller or enter a new des- tination, refer to page 131.
The destination guidance can also be started in the arrow or map display: Select the symbol and press the controller. During destination guidance, you can operate other equipment via iDrive at any time. You will be punctually notified of a change of direction by spoken instructions and the display of the direction arrow.
Ending/continuing destination guidance
In arrow or map display
3. Select "Start guidance" and press the con-
troller.
Select the
symbol and press the controller.
In destination list
This symbol indicates the current destina-
tion. 1. Select the current destination and press the
controller.
...
With programmable memory/direct selection buttons Press the desired destination is stored. Also refer to page 22. After the route has been calculated, destination guidance is indicated by arrows or a map dis- play on the Control Display.
button on which the
2. Select "Start guidance" and press the con-
troller.
143
When you park the vehicle before reaching the entered destination, the following question is displayed before beginning the next trip: "Continue guidance to destination?". The destination guidance starts automatically after a short time. To start the destination guidance: Select "Yes" and press the controller.
Displaying route You have the option of displaying various views of the route during destination guidance.
From another menu, you can change directly to the screen last displayed, refer to Comfort opening of menu items on page 18.<
Displaying arrow display 1. Select "Navigation" and press the control-
ler.
2. Change into the fourth field from the top. Turn the controller until "Arrow display" is selected and press the controller.
1 Switching voice instructions on/off 2 Selecting route criteria 3 Starting/ending destination guidance 4 Arrow to destination from a bird's eye view 5 Distance to the next change of direction 6 Current position 7 Direction of travel > Outline arrow:
Destination guidance on the calculated route
> Solid arrow:
Arrow shows the route to be calculated from a bird's eye view when the vehicle is not located in an area contained on the navigation DVD, e.g. in a multi-level parking lot.
Depending on the equipment, the estimated time of arrival and the distance to the destina- tion are displayed in the top or bottom line of the Control Display. Before a change in direction, the representation of the arrow changes.
The arrow display is shown.
144
1 Street name for change of direction 2 Distance up to change of direction 3 Change of direction
To exit the menu:
Select the arrow and press the controller.
Displaying map view You can have your current position displayed on a map. After starting the destination guidance, the planned route is shown on the map. 1. Select "Navigation" and press the control-
ler.
2. Change into the fourth field from the top. Turn the controller until the desired map view is selected: > "Map facing north" > "Map direction of travel" > "Perspective"
3. Press the controller.
1 Switching voice instructions on/off 2 Starting/ending destination guidance 3 Selecting destination via map 4 Showing/hiding information last selected, refer to Selecting destination using infor- mation on page 137
5 Changing map display
> "Map facing north" > "Map direction of travel"
"Perspective" 6 Changing route criteria 7 Manually displaying traffic information* 8 Arrow to destination from a bird's eye view The estimated time of arrival and the distance to the destination are shown in the bottom line of the Control Display. To exit from the menu:
Select the arrow and press the controller. At scales of less than 250 miles/500 km, you have the option of deciding whether to orient the map to north, toward your current direction of travel, or show the map in perspective. At scales of 250 miles/500 km or greater, the map always points toward north.
Changing map display
Select the corresponding symbol and press the controller. The next map display is displayed.
Changing scale Turn the controller to change the scale.
Displaying streets and towns/cities of route You can have the roads and towns/cities along the route displayed during destination guid- ance. The distances remaining to be traveled on each individual road are also displayed. 1. Select "Navigation" and press the control-
ler.
2. Change into the third field from the top.
Turn the controller until "Route list" is selected and press the controller.
145
4. Select "Language / Units" and press the
controller.
5. Change to upper field if necessary. Turn the controller until "Languages" is selected and press the controller.
To exit the menu:
Select the arrow and press the controller.
Destination guidance via voice instructions
Switching voice instructions on/off
6. Select "Navigation voice instructions" and
press the controller.
symbol and press the controller.
Voice instructions can be switched on or off during the destination guidance in the arrow or map view: Select the To switch the voice instructions on and off at any time: 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller.
The voice instructions are switched on.
Repeating and canceling voice instructions With the programmable buttons on the steering wheel you can also make the following settings, refer to page 50: > Repeat the voice instruction:
Press the button.
> Switch voice instructions on/off:
Hold the button down.
Setting volume of voice instructions The volume can only be adjusted while a voice instruction is being output. 1. Repeat the last voice instruction, if neces-
sary.
2. Turn the button during the voice instruction
to select the desired volume.
146
This volume is independent of the volume of the audio sources. The setting is stored for the remote control cur- rently in use.
Changing route During destination guidance, you can revise the navigation system's route recommendations to avoid particular stretches of road. Enter the number of miles/kilometers that you want to travel before returning to the original route. 1. Select "Navigation" and press the control-
ler.
2. Change into the third field from the top. Turn the controller until "New route" is selected and press the controller.
3. Turn the controller to enter the desired
number and press the controller.
The route is recalculated. To exit from the menu without changing the route:
Select the arrow and press the controller.
Traffic information* In population centers you can display traffic information from radio stations that transmit information of the Traffic Info traffic warning service. This information of the traffic warning services is constantly updated using measuring data from traffic routing centers and information from traffic congestion indicators. During destination guidance the traffic informa- tion located near you on the route is automati- cally displayed. Regardless of whether the des- tination guidance is active, you can display the traffic information in the map view or in a list.
Switching reception of traffic information on/off iDrive, for explanation of concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Press the controller to open the 3. Turn the controller until "Settings" is
menu.
selected and press the controller.
4. Turn the controller until "Traffic Info" is
selected and press the controller.
147
5. Select "Traffic Info" and press the control-
ler.
The traffic information can be transferred
and displayed. "AUTO": automatic selection of the Traffic Info station with the strongest reception.
Depending on the station, either the sta- tion name, frequency, local number or
The current traffic information is shown on the Control Display sorted according to the dis- tance to the current vehicle position.
With destination guidance switched off 1. Open the start menu. 2. Move the controller to the right to open
"Navigation".
other information is displayed.<
3. Select "Traffic Info" and press the control-
ler.
Manually displaying traffic information
During destination guidance Traffic information can be displayed manually during destination guidance in the arrow or map view. If the symbol is shown with a red border, traf- fic information is available for the planned route. Select the symbol and press the controller.
The current traffic information is shown on the Control Display sorted according to the dis- tance to the current vehicle position.
Displaying detailed traffic information Select traffic information from the displayed list and press the controller.
During destination guidance, the traffic infor- mation on the planned route is marked with a yellow lozenge.
148
To exit from the menu:
Select the arrow and press the controller.
Outside planned route > Map scale up to 5 miles/10 km:
Depiction of traffic information in map view The traffic information symbols are shown in the map view up to a scale of 100 miles/200 km.
Traffic event with map scales greater than 5 miles/10 km, arrow points in the direction of travel concerned Several traffic events have been received. Select a smaller scale to display these individually.
With a scale of up to 5 miles/10 km, additional information is displayed. The length, direction and effect of a traffic obstruction are indicated with arrows along the route, e.g.
Slow traffic or other traffic event
Traffic back up
Stopped traffic
Stopped traffic in both directions of travel
Along planned route Yellow symbol with the traffic obstruction sym- bol.
White symbol with black or gray border with the traffic obstruction symbol
> Map scale from 10 miles/20 km:
White symbol with black border with an arrow in the direction concerned
Traffic information during destination guidance The system behavior varies depending on whether "Dynamic route" is selected: > "Dynamic route" is not selected:
If a traffic obstruction is reported to the nav- igation system, you will be provided with certain information from a distance of approx. 25 miles/40 km, e.g. the length of the traffic congestion. The last possible junction will be displayed shortly before this.
> "Dynamic route" is selected:
The route is automatically changed in case of traffic obstructions. Depending on the type of road and the nature and length of the traffic obstruction, the route can also be calculated so that you travel through the traffic obstruction.
This information is also displayed if you have called up another application on the Control Display.
Bypassing traffic congestion
Select "Detour" and press the controller. The navigation system determines a new route to bypass the traffic congestion.
149
Displaying current position You can have your current position displayed even when the destination guidance is switched off. 1. Select "Navigation" and press the control-
ler.
2. Change into the fourth field from the top.
Turn the controller until "Current position" is selected and press the controller.
The current position of your BMW is displayed.
If the navigation system is unable to identify a town or city, your current map coordinates will appear. To exit the menu:
Select the arrow and press the controller.
You can also have the current position dis- played on a map, refer to page 145.
Symbols for traffic information
Traffic light failure
Roadworks
General traffic obstruction Transport of hazardous load
Danger
Low clearance
No parking
Fog
Heavy rain
Slippery road
Cross winds
Smog
Road close
Slow traffic
Traffic back up
Stopped traffic
Icy roads
Uneven surface
Accident
Lane closure
Delay
Police checkpoint
150
What to do if …
What to do if … > a navigation DVD is inserted, but an instruc- tion to insert the DVD appears on the Con- trol Display? The navigation DVD may not be the correct DVD for the navigation system. This infor- mation is indicated on the DVD label.
> you request the current position of your vehicle, but do not receive a precise dis- play? The system is unable to receive enough GPS signals at your current position due to obstructions, your position is not yet avail- able on your navigation DVD, or the system is in the process of calculating your posi- tion. Reception is best when you have an unobstructed view to the sky.
> the destination guidance does not accept a
destination? The data of the destination is not stored on the navigation DVD that is loaded. Select a destination that is as close as possible to the original.
> the destination guidance does not accept
an address without the street name? On the navigation DVD, no downtown area can be determined for the city or town entered. Enter any street, or a destination such as the railway station in the selected town, and then start the destination guid- ance.
> you want to enter a destination for the des-
tination guidance, but it is not possible to select the letters for your desired entry? The data of the destination is not stored on the navigation DVD that is loaded. In this case, the system will not offer you any let- ters to choose from. Select a destination that is as close as possible to the original.
> the system stops furnishing directions on
which way to turn as you approach intersec- tions? You are driving in an area that has not yet been completely recorded on the naviga- tion DVD. Instead of an arrow indicating a turn, you will see an arrow which indicates the general direction of your planned route. Or you have left the recommended route and the system requires a few seconds to calculate a new recommended route.
> the navigation system does not react to
entries? If the battery was disconnected, it takes about 10 minutes before the system is once again operational.
151
Entertainment Entertainment
Operation of the radio and CD as well as their tone settings are described in this chapter.
s
On/Off and settings
The following audio and video sources have common controls and adjustment options: > Radio > CD player > CD changer*
Controls The audio and video sources can be operated with: > Buttons in the area of the CD player > iDrive > Buttons on steering wheel, refer to page 11
> Programmable memory/direct selectionbuttons, refer to page 21
Buttons on CD player
Equipment with a single drive
1 Entertainment sound output on/off, volume
> Press: switch on/off.
When you switch on, the last set radio station or CD track is played.
> Turn: adjust volume.
Equipment with two drives
1 Entertainment sound output on/off, volume
> Press: switch on/off.
When you switch on, the last set radio station or CD track is played.
> Turn: adjust volume.
2 Drive for audio CDs
Eject CD
Station scan/track search
> Change radio station. > Select track for CD player and
CD changer.
5 Drive for navigation DVDs
Operation via iDrive iDrive, for explanation of concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
Eject CD
3 Drive for audio CDs
Station scan/track search
> Change radio station. > Select track for CD player and
CD changer.
154
Tone control You can alter various tone settings, e.g. treble and bass, or the speed-dependent volume increase. The tone settings are set for all audio sources at once. From radio readiness, the settings are stored for the remote control currently in use.
Changing tone settings 1.
button.
This opens the start menu.
2. Press the controller to open the menu. 3. Turn the controller until "Settings" is
selected and press the controller.
4. Select "Audio" or "Tone / volume" and
press the controller.
The tone settings can also be selected when you have opened "Entertainment" in the start menu: Select "Set" and then "Tone", and press the controller.
Treble and bass 1. Select "Treble / Bass" and press the con-
troller.
You have the following choices: > "FM" and "AM": radio reception > "WB": Weather Band station > "SAT": satellite radio* > "CD": CD player or changer > "AUX": external audio device > "Set": depending on the audio source,
other adjustments can be made, e.g. with the radio: update station with strongest reception, store station, tone control, sam- ple stations.
From another menu, you can change directly to the screen last displayed, refer to Comfort opening of menu items on page 18.< From radio readiness, the selected audio source is stored for the remote control currently in use.
Switching on/off To switch the Entertainment sound output on and off: Press knob 1 on the CD player.
This symbol on the Control Display indi-
cates that sound output is switched off. For equipment with a single drive, the sound output is available for approx. 20 minutes with the ignition switched off. Switch on the sound output again for this pur- pose.
Adjusting volume Turn knob 1 on the CD player until the desired volume is set. You can also adjust the volume with buttons on the steering wheel, refer to page 11. From radio readiness, the setting is stored for the remote control currently in use.
155
s
2. Move the controller to the left or right to
2. Turn the controller:
select "Treble" or "Bass".
The adjustment is applied; the field can be changed.
3. Turn the controller until the desired setting
is selected.
Balance and fader You can adjust the volume distribution in the same manner as "Treble / Bass". > "Balance": left/right volume distribution > "Fader": front/rear volume distribution
Speed-dependent volume control The speed-dependent volume control auto- matically increases the volume with increasing speed. You can set various stages for the increase in volume. When equipped with two drives: 1. Select "Speed volume" and press the con-
troller.
If vehicle is equipped with a single drive: 1. Select "Volume settings" and press the
controller.
2. Change to the second field from the top if
necessary. Select "Speed volume" and press the controller.
3. Turn the controller:
The adjustment is applied; the field can be changed.
156
Professional HiFi System* You can choose between stereo and multi- channel playback, surround. 1. Select "Surround Settings" and press the
controller.
2. Move the controller to the left or right to
select the desired frequency range.
3. Turn the controller until the desired setting
is selected.
Resetting tone settings You can reset all tone settings to the default settings. 1. Open the start menu. 2. Press the controller to open the 3. Turn the controller until "Settings" is
menu.
selected and press the controller.
4. Select "Audio" and press the controller. 5. Change to upper field if necessary. Turn the
controller until "Reset" is selected and press the controller.
2. Select "Stereo" or "Surround".
3. Press the controller.
The spatial sound effect is activated.
Equalizer* You can set individual sound frequency ranges. 1. Select "Equalizer" and press the controller.
6. When equipped with two drives:
Select "Yes" and press the controller.
157
i
Radio
Your radio provides reception of the FM and AM wavebands.
the station with the strongest signal, refer to page 159.
Listening to radio
Changing stations
Turn the controller.
button for the corresponding
Buttons on CD player Press the direction. The system changes to the next displayed sta- tion. You can also change stations with buttons on the steering wheel, refer to page 11.
Changing selection criteria In addition to the stations currently displayed, you can have stations with another selection criterion displayed. You can choose from the following selection criteria: > "All stations":
Stations that can currently be received in the "FM" waveband.
> "Autostore":
The stations with the strongest received signals in the "AM" waveband.
> "Presets":
Stations you have previously stored, refer to page 160.
Press the knob if the sound output is switched off. iDrive, for explanation of concept, refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller backwards to open
"Entertainment".
3. Change to upper field if necessary. Select
"FM" or "AM".
4. Press the controller. Stations are shown on the Control Display on the basis of various selection criteria, e.g. "Pre- sets". If "Autostore" does not display any stations or if the stations displayed can no longer be received in the AM reception range, to update
158
To change the selection criterion: 1. Change into the second field from the top. 2. Select the selection criterion and press the
controller.
Selecting frequency manually With "Manual" you can select stations that are received in addition to those displayed. 1. Select "FM" or "AM" and press the control-
ler.
2. Change into the second field from the top. 3. Select "Manual" and press the controller.
Sampling stations, scan The system automatically plays a brief sample from each of the stations on the current wave- band. 1. Select "FM" or "AM" and press the control-
ler. "Set" is selected.
2. Press the controller.
Other menu items are displayed.
3. Select "Scan" and press the controller.
4. Turn the controller to set a certain fre-
quency.
Updating stations with best reception If you are on a longer journey and leave the transmission range of the stations originally set, you can update the list of stations in the AM range with the best reception. 1. Select "AM" and press the controller. 2. Change into the second field from the top. 3. Select "Autostore" and press the controller.
"Set" is selected.
The stations are sampled. To end sampling: 1. Press the controller. 2. Select "Scan" and press the controller. This cancels sampling of the stations, and the radio remains on the current station.
Buttons on CD player
To sample the stations, press and hold
the button for the corresponding direction. To end scanning, press the button again.
4. Press the controller.
Other menu items are displayed.
159
5. Select "Autostore" and press the controller.
5. Select "Store" and press the controller.
The display of the stations with the strongest reception is updated. The frequencies of the stations are displayed.
Storing stations
Via iDrive 1. Select "FM" or "AM" and press the control-
ler.
2. Change into the second field from the top. Turn the controller until the desired selec- tion criterion is selected and press the con- troller.
3. Select the desired frequency or station.
"Set" is selected.
"Presets" is displayed.
6. Turn the controller until the desired mem-
ory position is selected.
7. Press the controller. The station is stored.
The stations of the last selection criterion are displayed once again after a short time. From radio readiness, the stations are stored for the remote control currently in use.
With programmable memory/direct selection buttons You can also store a station on the programma- ble memory/direct selection buttons, also refer to page 21. 1. Select a station. 2.
Press and hold desired but-
...
ton.
Changing a memory position
