Login- Download PDF Manual
-
▷ Automatic transmission: Selector lever in transmission position N or P and gas pedal not depressed.
"Measure engine oil level"
In order to perform a detailed measurement of the engine oil level: 1. "Vehicle Info" 2. "Vehicle status" 3. 4. "Start measurement" The oil level is checked and displayed via a scale. During the detailed measurement, the idle speed is increased somewhat. Duration: approx. 1 minute.
Adding engine oil Filler neck
When the indicator lights up in the instrument cluster, add 1 US quart/liter of engine oil within the next 125 miles/200 km.
274
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Engine oil Mobility
Alternative oil types If the approved engine oils are not available, up to 1 US quart/liter of an oil with the following specification can be added: Specification API SM or superior grade specification
Oil change An oil change should be carried out by your service center only.
Do not add too much engine oil When too much engine oil is added, im‐
mediately have the vehicle checked, otherwise, this may cause engine damage.◀
Protect children Keep oil, grease, etc., out of reach of chil‐ dren and heed the warnings on the containers to prevent health risks.◀
Oil types for refilling Notes
No oil additives Oil additives may lead to engine damage.◀ Viscosity grades for engine oils When selecting an engine oil, ensure that
the engine oil belongs to one of the viscosity grades SAE 0W-40, SAE 0W-30, SAE 5W-40, and SAE 5W-30 or malfunctions or engine dam‐ age may occur.◀ The engine oil quality is critical for the life of the engine. Some types of oils in some cases are not avail‐ able in all countries. Approved oil types
Specification BMW High Performance SAE 5W-30
BMW Longlife-01
BMW Longlife-01 FEAdditional information about the approved types of oils can be requested from the service center.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
275
Mobility
Coolant
Coolant Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
General information
Danger of burns from hot engine Do not open the cooling system while the engine is hot; otherwise, escaping coolant may cause burns.◀
Suitable additives Only use suitable additives; otherwise, en‐
gine damage may occur. The additives are harmful to your health.◀ Coolant consists of water and additives. Not all commercially available additives are suit‐ able for your vehicle. Ask your service center for suitable additives.
Coolant level Checking 1. Let the engine cool. 2. The coolant level is correct if it lies between
the minimum and maximum marks. The marks are on the side of the coolant reser‐ voir.
Adding engine oil 1. Let the engine cool. 2. Turn the cap of the coolant reservoir slightly counterclockwise to allow any excess pres‐ sure to dissipate, and then open it.
3.
If the coolant is low, slowly add coolant up to the specified level; do not overfill.
4. Turn the cap until there is an audible click. 5. Have the cause of the coolant loss elimi‐
nated as soon as possible.
Disposal
Comply with the relevant environmental protection regulations when disposing of coolant and coolant additives.
276
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Maintenance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
BMW Maintenance System The maintenance system directs you to re‐ quired maintenance measures and thereby sup‐ ports you in maintaining road safety and the op‐ erational reliability of the vehicle.
Condition Based Service CBS Sensors and special algorithms take into ac‐ count the driving conditions of your vehicle. Based on this, Condition Based Service deter‐ mines the maintenance requirements. The system makes it possible to adapt the amount of maintenance you need to your user profile. Detailed information on service requirements, refer to page 77, can be displayed on the Control Display. Service data in the remote control Information on the required maintenance is con‐ tinuously stored in the remote control. Your service center will read out this data and suggest the right array of service procedures for your ve‐ hicle. Therefore, hand your service specialist the re‐ mote control that you used most recently.
Maintenance Mobility
Storage periods Storage periods during which the vehicle bat‐ tery was disconnected are not taken into ac‐ count. If this occurs, have a service center update the time-dependent maintenance procedures, such as checking brake fluid and, if necessary, changing the engine oil and the microfilter/acti‐ vated-charcoal filter.
Service history Perform maintenance work at the service center and have them recorded in the vehicle data. The entries are like a service booklet of the docu‐ mentation of regular maintenance. Displaying entered maintenance work on the Control Display, refer to page 78.
Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models Please consult your Service and Warranty Infor‐ mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service requirements. Maintenance and repair should be performed by your service center. Make sure to have regular maintenance procedures recorded in the vehi‐ cle's Service and Warranty Information Booklet for US models, and in the Warranty and Service Guide Booklet for Canadian models. These en‐ tries are proof of regular maintenance.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
277
Data memory Your vehicle records data relating to vehicle op‐ eration, faults and user settings. These data are stored in the remote control and can be read out with suitable devices, particularly when the ve‐ hicle is serviced. The data obtained in this way provide valuable information for service proc‐ esses and repair or for optimizing and develop‐ ing vehicle functions further. In addition, if you signed a service contract for BMW Assist, certain vehicle data can be sent directly from the vehicle to facilitate the desired services.
Mobility Maintenance
Socket for OBD Onboard Diagnosis Position
There is an OBD socket on the driver's side for checking the primary components in the vehicle emissions.
Emissions
▷ The warning lamp lights up:
Emissions are deteriorating. Have the vehicle checked as soon as pos‐ sible. Canadian model: warning light indi‐ cates the engine symbol.
▷ The warning lamp flashes under certain cir‐
cumstances: This indicates that there is excessive misfir‐ ing in the engine. Reduce the vehicle speed and have the sys‐ tem checked immediately; otherwise, seri‐ ous engine misfiring within a brief period can seriously damage emission control compo‐ nents, in particular the catalytic converter.
Fuel cap
The indicator lamp lights up. If the fuel cap is not properly tightened, the OBD system may conclude that fuel vapor is escaping. If the cap is then tightened, the display should go out in a short time.
278
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Replacing components Mobility
Replacing components Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
3. Squeeze the retainer spring, arrow 1, and
fold up the wiper blade, arrow 2.
Onboard vehicle tool kit
4. Remove the wiper blade forward from the
catch. Insert the new wiper blade in reverse order of removal until it locks in place.
5.
Risk of damage Before opening the hood, ensure that the wiper arms with the wiper blades are against the windshield to prevent damage.◀
Lamp and bulb replacement General information Lamps and bulbs make an essential contribution to vehicle safety. The manufacturer of the vehicle recommends that you entrust corresponding procedures to the service center if you are unfamiliar with them or they are not described here. You can obtain a selection of replacement bulbs at the service center. Danger of burns Only change bulbs when they are cool;
otherwise, there is the danger of getting burned.◀
The onboard vehicle tool kit is located on the right side in the cargo area in a storage com‐ partment. Open the cover.
Wiper blade replacement General information
Do not fold down the wipers without wiper blades
Do not fold down the wipers if wiper blades have not been installed; this may damage the wind‐ shield.◀
Replacing the wiper blades 1. To change the wiper blades, fold up, refer to
page 66, the wiper arms.
2. Fold up and hold the wiper arm firmly.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
279
If the headlamps do not dim despite driving with the light switched on, increasing humidity forms, e. g. water droplets in the light, have the service center check this. Front lamps, bulb replacement Halogen headlamps
1 Parking lamps 2 High beams/headlamp flasher 3 Low beams 4 Turn signal 5 Daytime running lights
Accessing the turn signals and low beams Follow the General instructions on lamps and bulbs, refer to page 279. 1.
In the wheel house, loosen the two brackets and remove the cover.
Mobility
Replacing components
Working on the lighting system When working on the lighting system, you should always switch off the lights affected to prevent short circuits. To avoid possible injury or equipment damage when replacing bulbs, observe any instructions provided by the bulb manufacturer.◀
Do not perform work/bulb replacement on xenon headlamps
Have any work on the xenon lighting system, in‐ cluding bulb replacement, performed only by a service center. Due to the high voltage present in the system, there is the danger of fatal injuries if work is carried out improperly.◀
Do not touch the bulbs Do not touch the glass of new bulbs with
your bare hands, as even minute amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base.◀
Light-emitting diodes (LEDs) Light-emitting diodes installed behind a cover serve as the light source for controls, display el‐ ements and other equipment. These light-emitting diodes, which are related to conventional lasers, are officially designated as Class 1 light-emitting diodes. Do not remove the covers Do not remove the covers, and never stare into the unfiltered light for several hours; other‐ wise, irritation of the retina could result.◀
Headlamp glass Condensation can form on the inside of the ex‐ ternal lamps in cool or humid weather. When driving with the light switched on, the conden‐ sation evaporates after a short time. The head‐ lamp glasses do not need to be changed.
280
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Turn signal 21-watt bulb, PY21W 1.
If necessary, pull the inside trim of the wheel house slightly inward. Turn the bulb holder counterclockwise and remove.
Replacing components Mobility
Low beams 55-watt bulb, H7
1. Turn the cap counterclockwise and remove.2. Press the bulb gently into the socket, turn
counterclockwise and remove. Install the new bulb and bulb holder in re‐ verse order of removal.
3.
4. Attach the cover to the wheel house.
2. Tilt the bulb down and then up to loosen it
from the holder and remove.
3. Pull the connector off the bulb. 4. Attach the connector to the new bulb. 5. First insert the bulb at the top with the strap, arrow 1, and then press down firmly, arrow 2. Make sure that the bulb snaps into place.
6. Close the headlamp housing with the cap.
Make sure that the cap engages.
7. Attach the cover to the wheel house.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
281
Mobility
Replacing components
Accessing the daytime running lights, high beams/headlamp flasher and parking lamps Follow the General instructions on lamps and bulbs, refer to page 279. 1. Open the hood, refer to page 273. 2. Turn the cap counterclockwise and remove.
High beams/headlamp flasher 55-watt bulb, H7
1. Tilt the bulb down and then up to loosen itfrom the holder and remove.
Parking lamps 6-watt bulb, H6W 1. Turn the bulb holder counterclockwise and
remove.
2. Pull the connector off the bulb. 3. Attach the connector to the new bulb. 4. First insert the bulb at the top with the strap, arrow 1, and then press down firmly, arrow 2. Make sure that the bulb snaps into place.
5. Close the headlamp housing with the cap.
Make sure that the cap engages.
2. Press the bulb gently into the socket, turn
counterclockwise and remove.
3. To insert the bulb and bulb holder, proceed in reverse order of removal. Make sure that the bulb holder snaps into place.
4. Close the headlamp housing with the cap.
Make sure that the cap engages.
282
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Replacing components Mobility
Headlamps
Daytime running lights 24-watt bulb, PW24W 1.
If necessary, remove the high beam bulb connector.
2. Remove the bulb holder.
1 Parking lamps/daytime running lights 2 Low beams/high beams/headlamp flasher 3 Turn signal Low beams and high beams are designed with xenon technology. The parking lamps and daylight running lights are made using LED technology. Contact your service center in the event of a malfunction.
Turn signal Follow the General instructions on lamps and bulbs, refer to page 279.
3. Remove the bulb from the bulb holder. 4. To insert the new bulb, proceed in reverse order of removal. During insertion, the bot‐ tom of the bulb holder must be facing down‐ ward. Make sure that the bulb holder snaps into place.
5. Attach the high beam bulb connector. 6. Close the headlamp housing with the cap.
Make sure that the cap engages.
Xenon headlamps Xenon headlamps Because of the long life of these bulbs, the like‐ lihood of failure is very low. Switching the lamps on and off frequently shortens their life. If a xenon bulb fails, switch on the front fog lamps and continue the trip with great care. Comply with local regulations.
Do not perform work/bulb replacement on xenon headlamps
Have any work on the xenon lighting system, in‐ cluding bulb replacement, performed only by a service center. Due to the high voltage present in the system, there is the danger of fatal injuries if work is carried out improperly.◀ For checking and adjusting headlamp aim, please contact your BMW center.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
283
Mobility
Replacing components
21-watt bulb, PY21W 1.
In the wheel house, loosen the two brackets and remove the cover.
Carefully raise the wheel house panel, ar‐ row 2.
2.
If necessary, pull the inside trim of the wheel house slightly inward. Turn the bulb holder counterclockwise and remove.
2. Pull off the bulb connector, arrow 1.
Turn the bulb, arrow 2. Left side of vehicle: turn clockwise. Right side of vehicle: turn counterclockwise. Remove the bulb.
3. Press the bulb gently into the socket, turn
counterclockwise and remove. Install the new bulb and bulb holder in re‐ verse order of removal.
4.
5. Attach the cover to the wheel house. Front fog lamps Follow the General instructions on lamps and bulbs, refer to page 279. 35-watt bulb, H8
1. Use the back side of the screwdriver from the onboard vehicle tool kit to remove the three wheel house panel screws, arrow 1.3.
Insert the new bulb, connect the connector and screw on the wheel house panel.
Turn signal in exterior mirror Follow the General instructions on lamps and bulbs, refer to page 279. The turn signals feature LED technology. Con‐ tact your service center in the event of a mal‐ function.
284
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Tail lamps, bulb replacement At a glance
Replacing components Mobility
Removing the exterior tail lamp 1. Open trunk lid. 2. Use the screwdriver from the onboard vehi‐ cle tool kit to loosen the screw, arrow 1, and remove the cover, arrow 2.
1 Turn signal 2 Reversing lamp 3 Inside brake lamp 4 Tail lamps 5 Outside brake lamp
Bulb replacement, exterior tail lamps General information Follow the General instructions on lamps and bulbs, refer to page 279. Turn signal: 21-watt bulb, P21W Exterior brake lamp: 21-watt bulb, P21W The tail lamps feature LED technology. Contact your service center in the event of a malfunction.
Use caution when replacing the bulb Use caution and proceed one step at a
time when replacing the bulbs to prevent dam‐ age to the tail lamps or vehicle.◀
3. Use the screwdriver handle to loosen the two nuts, arrows 1 and 2, and remove. The tail lamp is still attached to a rubber mount on the outside.
4. Grasp the inner edge of the tail lamp and
carefully swing it back and out of the rubber mount, arrow 1. Use your free hand to hold it in place in order to prevent the tail lamp from coming loose suddenly. Make sure that the foam rubber sealing ring is on the cen‐ tering pin, arrow 2.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
285
Mobility
Replacing components
5. Remove the connecting line from the clip on
the bulb holder.
6. Release the catch at the top on the connec‐
tor of the connecting line and remove the connector from the bulb holder.
Replacing the bulbs 1. Loosen the four fasteners, arrow 1, on the bulb holder and remove the bulb holder from the tail lamp, arrow 2.
2. Press the defective bulb gently into the
socket, turn counterclockwise and remove.
3. Proceed in the reverse order to insert the new bulb and attach the bulb holder. Make sure that the bulb holder engages in all fas‐ teners.
Installing the tail lamp 1. Connect the connecting line to the tail lamp
and secure the bulb holder in the clip.
2. Make sure that the sealing ring is on the
centering pin, arrow 2, and is not damaged.
3. Position and firmly press the outer part of
the tail lamp onto the rubber mount, arrow 1
and the inner part onto the centering com‐ponent, arrow 2. Make sure that the tail lamp engages in the rubber mount.
4. Screw the two nuts onto the tail lamp and
mount the cover.
Lamps in the trunk lid General information Follow the General instructions on lamps and bulbs, refer to page 279. Reversing lamps: 21-watt bulb, P21W Inner brake lamps: 21-watt bulb, H21W
Accessing the lamps 1. Use the screwdriver from the onboard vehi‐ cle tool kit to loosen and completely remove the six screws on the trim.
2. Carefully loosen the trim from the trunk lid, starting at the edge and working toward the area around the recessed grips. Make sure that the trim does not become stuck.
3. Carefully swing out the trim.
286
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Replacing the reversing lamp and inner brake lamp 1. Loosen the two fasteners, arrow 1 and pull down on the lamp holder to remove, arrow 2.
Replacing components Mobility
Changing wheels Notes The vehicle equipment does not include a spare tire. When using run-flat tires or tire sealants, a tire does not need to be changed immediately in the event of pressure loss due to a flat tire. The tools for changing wheels are available as accessories from your service center. Jacking points for the vehicle jack
2. Press the defective bulb gently into the
socket, turn counterclockwise and remove. Insert the new bulb.
3.
Installing the bulb holder 1. Slide the bulb holder onto the two guide pins, arrow 1. Insert the two contacts, ar‐ row 2, into the connections, arrow 3.
2. Press on the bulb holder. Make sure that the
two exterior fasteners latch into place.
3. Swing the trim back onto the trunk lid and
secure.
Tail lamp, license plate lamp and central brake lamp Follow the General instructions on lamps and bulbs, refer to page 279. The lamps feature LED technology. Contact your service center in the event of a malfunction.
The jacking points for the vehicle jack are lo‐ cated at the positions shown.
Vehicle battery Maintenance The battery is maintenance-free, i.e., the elec‐ trolyte will last for the life of the battery. Your service center will be glad to advise you on questions regarding the battery. Battery replacement
Use approved vehicle batteries only Only use vehicle batteries that have been approved for your vehicle by the manufacturer; otherwise, the vehicle could be damaged and systems or functions may not be fully availa‐ ble.◀ After a battery replacement, have the battery registered on the vehicle by your service center
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
287
Mobility
Replacing components
to ensure that all comfort functions are fully available and that any Check Control messages are no longer displayed. Charging the battery In the vehicle, only charge the battery via the starting aid terminals, refer to page 292, in the engine compartment with the engine off. Power failure After a temporary power loss, some equipment needs to be reinitialized. Individual settings need to be reprogrammed: ▷ Seat and mirror memory: store the positions
again.
▷ Time: update. ▷ Date: update. ▷ Radio station: save again. ▷ Navigation system: wait for the operability of
the navigation.
Disposing of old batteries
Have old batteries disposed of by your service center or bring them to a recy‐ cling center.
Maintain the battery in an upright position for transport and storage. Secure the battery so that it does not tip over during transport.
Fuses Notes
Replacing fuses Never attempt to repair a blown fuse and do not replace a defective fuse with a substitute of another color or amperage rating; this could lead to a circuit overload, ultimately resulting in a fire in the vehicle.◀ Plastic tweezers and information on the fuse types and locations are stored in the fuse box in the cargo area.
In the engine compartment 1. Use the onboard vehicle toolkit to loosen the
three cover screws, arrow 1.
2. Pull up the holder, arrow 2. 3. Remove the cover from one side, arrow 3. 4. Press the four fasteners and remove the
cover.
Reattaching the covers 1. When attaching the cover, make sure that all
four fasteners are engaged.
2. Attach the cover under the rubber lip and
then thread it between the bars.
3. Press down on the holder and tighten the
three screws.
288
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Replacing components Mobility
In the cargo area
Raise the cargo floor panel.
Information on the fuse types and locations is found on a separate sheet.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
289
Mobility
Breakdown assistance
Breakdown assistance Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
Hazard warning flashers
Emergency Request not guaranteed For technical reasons, the Emergency Re‐ quest cannot be guaranteed under unfavorable conditions.◀
Service contract ▷ After your contract with BMW Assist has ex‐ pired, the BMW Assist system can be deac‐ tivated by the service center without you having to visit a workshop. After deactivation, an Emergency Request is no longer possible.
▷ Under certain circumstances, the system
can be reactivated by a service center after you sign a new contract.
Initiating an Emergency Request
The button is located in the center console.
Emergency Request Requirements ▷ Equipment version with full preparation
package mobile phone. An Emergency Request can be made, even if no mobile phones are paired with the ve‐ hicle.
▷ BMW Assist is activated. ▷ The radio ready state is switched on. ▷ The BMW Assist system is logged in to a wireless communications network sup‐ ported by BMW Assist.
▷ The Assist system is functional. Only press the SOS button in an emergency.
1. Press the cover briefly to open it. 2. Press the SOS button until the LED in the
button lights up.
▷ The LED lights up: an Emergency Request
was initiated. If the situation allows, wait in your vehicle until the voice connection has been estab‐ lished.
▷ The LED flashes if the connection to the
BMW Assist Response Center has been es‐ tablished. After the Emergency Request arrives at the BMW Assist Response Center, the BMW
290
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Assist Response Center contacts you and takes further steps to help you. Even if you are unable to respond, the BMW Assist Response Center can take further steps to help you under certain circumstan‐ ces. For this purpose, data that are used to de‐ termine the necessary rescue measures, such as the current position of the vehicle if it can be established, are transmitted to the BMW Assist Response Center.
▷ If the LED is flashing but the BMW Assist Response Center cannot be heard on the hands-free system, the hands-free system may be malfunctioning. However, the BMW Assist Response Center may still be able to hear you.
Initiating an Emergency Request automatically Under certain conditions, an Emergency Re‐ quest is automatically initiated immediately after a severe accident. Automatic Collision Notifica‐ tion is not affected by pressing the SOS button.
Warning triangle
The warning triangle is located on the inside of the trunk lid. To remove, loosen the bracket.
Breakdown assistance Mobility
First aid kit
The first aid kit is located in the cargo area in a storage compartment. Some of the articles have a limited service life. Check the expiration dates of the contents reg‐ ularly and replace any expired items promptly.
Roadside Assistance Service availability Roadside Assistance can be reached around the clock in many countries. You can obtain assis‐ tance there in the event of a vehicle breakdown. Roadside Assistance The Roadside Assistance, refer to page 251, phone number can be viewed on the iDrive or a connection to Roadside Assistance can be es‐ tablished directly.
Jump starting Notes If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent personal injury or damage to both vehicles, adhere strictly to the following proce‐ dure.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
291
Mobility
Breakdown assistance
Do not touch live parts To avoid the risk of potentially fatal injury, always avoid all contact with electrical compo‐ nents while the engine is running.◀
Preparation 1. Check whether the battery of the other ve‐ hicle has a voltage of 12 volts. This informa‐ tion can be found on the battery.
2. Switch off the engine of the assisting vehi‐
cle.
3. Switch off any electronic systems/power
consumers in both vehicles.
Bodywork contact between vehicles Make sure that there is no contact be‐
tween the bodywork of the two vehicles; other‐ wise, there is the danger of short circuits.◀
Starting aid terminals
Connecting order Connect the jumper cables in the correct
order; otherwise, there is the danger of injury from sparking.◀
The so-called starting aid terminal in the engine compartment acts as the battery's positive ter‐ minal. Open the cover of the starting aid terminal.
The body ground or a special nut acts as the negative terminal.
Connecting the cables 1. Open the cover of the BMW starting aid ter‐
minal.
2. Attach one terminal clamp of the positive jumper cable to the positive terminal of the battery, or to the corresponding starting aid terminal of the assisting vehicle.
3. Attach the other end of the cable to the pos‐ itive terminal of the battery, or to the corre‐ sponding starting aid terminal of the vehicle to be started.
4. Attach one terminal clamp of the negative jumper cable to the negative terminal of the battery, or to the corresponding engine or body ground of assisting vehicle.
5. Attach the other end of the cable to the neg‐ ative terminal of the battery, or to the corre‐ sponding engine or body ground of the ve‐ hicle to be started. Starting the engine Never use spray fluids to start the engine. 1. Start the engine of the assisting vehicle and let it run for several minutes at an increased idle speed.
2. Start the engine of the vehicle being started
in the usual way. If the first starting attempt is not successful, wait a few minutes before making another attempt in order to allow the discharged bat‐ tery to recharge.
292
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
3. Let both engines run for several minutes. 4. Disconnect the jumper cables in the reverse
order.
Check the battery and recharge if necessary.
Tow-starting and towing Automatic transmission: transporting your vehicle Note Your vehicle is not permitted to be towed. Therefore, contact a service center in the event of a breakdown.
Do not have the vehicle towed Have your vehicle transported on a loading platform only; otherwise, damage may occur.◀
Tow truck
Breakdown assistance Mobility
Towing
Follow the towing instructions Follow all towing instructions; otherwise,
vehicle damage or accidents may occur.◀ ▷ Make sure that the ignition is switched on; otherwise, the low beams, tail lamps, turn signals, and windshield wipers may be un‐ available.
▷ Do not tow the vehicle with the rear axle
tilted, as the front wheels could turn.
▷ When the engine is stopped, there is no power assist. Consequently, more force needs to be applied when braking and steer‐ ing.
▷ Larger steering wheel movements are re‐
quired. Tow truck
Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.◀
Use the tow fitting screwed in at the front for maneuvering the vehicle only. Manual transmission Gearshift lever in neutral position.
Have your vehicle transported with a tow truck with a so-called lift bar or on a flat bed.
Do not lift the vehicle Do not lift the vehicle by the tow fitting or body and chassis parts; otherwise, damage may result.◀
Towing other vehicles General information Light towing vehicle Your vehicle must not be lighter than the
vehicle being towed; otherwise, it will not be possible to control vehicle response.◀
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
293
Mobility
Breakdown assistance
Attaching the tow bar/tow rope correctly Attach the tow bar or tow rope to the tow fitting; connecting it to other vehicle parts may cause damage.◀ ▷ Switch on the hazard warning system, de‐
pending on local regulations.
Tow fitting
▷ If the electrical system has failed, clearly
identify the vehicle being towed by placing a sign or a warning triangle in the rear win‐ dow. Tow bar The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: ▷ Maneuvering capability is limited during cor‐
nering.
▷ The tow bar will generate lateral forces if it
is secured with an offset.
Tow rope When starting to tow the vehicle, make sure that the tow rope is taut. To avoid jerking and the associated stresses on the vehicle components when towing, always use nylon ropes or nylon straps.
Attaching the tow rope correctly Only secure the tow rope on the tow fit‐ ting; otherwise, damage can occur when it is se‐ cured on other parts of the vehicle.◀
The screw-in tow fitting should always be car‐ ried in the vehicle. It can be screwed in at the front or rear of the BMW. It is in the onboard ve‐ hicle tool kit located in a storage compartment on the right side in the cargo area. Open the cover.
Tow fitting, information on use ▷ Use only the tow fitting provided with the vehicle and screw it all the way in. ▷ Use the tow fitting for towing on paved roads
only.
▷ Avoid lateral loading of the tow fitting, e.g.,
do not lift the vehicle by the tow fitting.
Otherwise, damage to the tow fitting and the ve‐ hicle can occur.◀
Screw thread Push out the cover by pressing on the top edge. Front
294
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Breakdown assistance Mobility
Rear
Tow-starting Automatic transmission Do not tow-start the vehicle. Due to the automatic transmission, the engine cannot be started by tow-starting. Have the cause of the starting difficulties rem‐ edied. Manual transmission If possible, do not tow-start the vehicle but start the engine by jump-starting, refer to page 291. If the vehicle is equipped with a catalytic con‐ verter, only tow-start while the engine is cold. 1. Switch on the hazard warning system and
comply with local regulations. Ignition, refer to page 59, on.
2. 3. Engage third gear. 4. Have the vehicle tow-started with the clutch pressed and slowly release the clutch. After the engine starts, immediately press on the clutch again.
5. Stop at a suitable location, remove the tow bar or rope, and switch off the hazard warn‐ ing system.
6. Have the vehicle checked.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
295
Mobility
Care
Care Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
Car washes Notes
Steam jets or high-pressure washers When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃. Holding them too close or using excessively high pressures or temperatures can cause dam‐ age or preliminary damage that may then lead to long-term damage. Follow the operating instructions for the high- pressure washer.◀
Cleaning sensors/cameras with high- pressure washers
When using high-pressure washers, do not spray the exterior sensors and cameras, e.g., Park Distance Control, for extended periods of time and only from a distance of at least 12 in/ 30 cm.◀ Wash your vehicle frequently, particularly in win‐ ter. Intense soiling and road salt can damage the ve‐ hicle.
Automatic car washes Notes Note the following: ▷ Give preference to cloth car washes or those that use soft brushes in order to avoid paint damage.
▷ Make sure that the wheels and tires are not
damaged by the transport mechanisms.
▷ Fold in the exterior mirrors; otherwise, they may be damaged, depending on the width of the vehicle.
▷ Deactivate the rain sensor, refer to page 65,
to avoid unintentional wiper activation.
▷ In some cases, an unintentional alarm can be triggered by the interior motion sensor of the alarm system. Follow the instructions on avoiding an unintentional alarm, refer to page 41.
Guide rails in car washes Avoid car washes with guide rails higher than 4 in/10 cm; otherwise, the vehicle body could be damaged.◀
Before driving into a car wash In order to ensure that the vehicle can roll in a car wash, take the following steps: Manual transmission: 1. Release the parking brake. 2. Drive into the car wash. 3. Shift to neutral. 4. Switch the engine off. 5. Switch on the ignition. Automatic transmission: 1. Release the parking brake, refer to page 63. 2. Drive into the car wash. 3. Depress the brake pedal as needed.
296
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
4. Engage transmission position N. 5. Switch the engine off. In this way, the igni‐ tion remains switched on, and a Check-Con‐ trol message is displayed.
Transmission position P with the igni‐ tion off
When the ignition is switched off, position P is engaged automatically. When in an auto‐ matic car wash, for example, ensure that the ignition is not switched off accidentally.◀ The vehicle cannot be locked from the outside when in transmission position N. A signal is sounded when an attempt is made to lock the vehicle. Transmission position Transmission position P is engaged automati‐ cally: ▷ When the ignition is switched off. ▷ After approx. 15 minutes. Headlamps ▷ Do not rub dry and do not use abrasive or
caustic cleansers.
▷ Soak areas that have been soiled e.g. due to
insects, with shampoo and wash off with water.
▷ Thaw ice with deicing spray; do not use an
ice scraper.
After washing the vehicle After washing the vehicle, apply the brakes briefly to dry them; otherwise, braking action can be reduced and corrosion of the brake discs can occur.
Care Mobility
Vehicle care Car care products BMW recommends using cleaning and care products from BMW, since these have been tested and approved.
Car care and cleaning products Follow the instructions on the container. When cleaning the interior, open the doors or windows. Only use products intended for cleaning vehi‐ cles. Cleansers can contain substances that are dan‐ gerous and harmful to your health.◀
Vehicle paint Regular care contributes to driving safety and value retention. Environmental influences can act on the vehicle paint. Tailor the frequency and extent of your car care to these influences. Leather care Remove dust from the leather often, using a cloth or vacuum cleaner. Otherwise, particles of dust and road grime chafe in pores and folds, and lead to increased wear and premature degradation of the leather surface. To guard against discoloration, such as from clothing, provide leather care roughly every two months. Clean light-colored leather more frequently be‐ cause soiling on such surfaces is substantially more visible. Use leather care products; otherwise, dirt and grease will gradually break down the protective layer of the leather surface. Suitable care products are available from the service center.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
297
Mobility
Care
Upholstery material care Vacuum regularly with a vacuum cleaner. If they are very dirty, e.g., beverage stains, use a soft sponge or microfiber cloth with a suitable interior cleaner. Clean the upholstery down to the seams using large sweeping motions. Avoid rubbing the ma‐ terial vigorously.
Damage from Velcro® fasteners Open Velcro® fasteners on pants or other articles of clothing can damage the seat covers. Ensure that any Velcro® fasteners are closed.◀
Caring for special components Light-alloy wheels Use wheel cleaner, particularly during the winter months. Do not use aggressive, acidic, strongly alkaline or abrasive cleaners, or steam jets above 140 ℉/60 ℃; follow the manufacturer's instructions. Chrome surfaces Carefully clean components such as the radiator grille or door handles with an ample supply of water, possibly with shampoo added, particu‐ larly when they have been exposed to road salt. Rubber components Aside from water, treat only with rubber cleans‐ ers. When cleaning rubber seals, do not use any sil‐ icon-containing car care products in order to avoid damage or reduced noise damping. Fine wood parts Clean fine wood facing and fine wood compo‐ nents only with a moist rag. Then dry with a soft cloth. Plastic components These include:
▷ Imitation leather surfaces. ▷ Headliner. ▷ Lamp lenses. ▷ Instrument cluster cover. ▷ Matte black spray-coated components. ▷ Painted parts in the interior. Clean with a microfiber cloth. Lightly dampen the cloth with water. Do not soak the headliner.
Do not use cleansers that contain alcohol or solvents
Do not use cleansers that contain alcohol or sol‐ vents, such as lacquer thinners, heavy-duty grease removers, fuel, or such; this could lead to surface damage.◀
Safety belts Dirty belt straps impede the reeling action and thus have a negative impact on safety.
Chemical cleaning Do not clean chemically; this can destroy
the webbing.◀ Use only a mild soapy solution, with the safety belts clipped into their buckles. Do not allow the reels to retract the safety belts until they are dry. Floor carpets and floor mats
No objects in the area around the pedals Keep floor mats, carpets, and any other objects out of the area of motion of the pedals; otherwise, the function of the pedals could be impeded while driving Do not place additional floor mats over existing mats or other objects. Only use floor mats that have been approved for the vehicle and can be properly fixed in place. Ensure that the floor mats are securely fastened again after they were removed for cleaning, for example.◀
298
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Care Mobility
Floor mats can be removed from the passenger compartment for cleaning. If the floor carpets are very dirty, clean with a microfiber cloth and water or a textile cleaner. To prevent matting of the carpet, rub back and forth in the direction of travel only. Sensors/cameras To clean sensors and cameras, use a cloth mois‐ tened with a small amount of glass cleaner. Displays/screens Clean the displays with a microfiber cloth.
Cleaning displays Do not use chemical or household cleans‐
ers. Keep all fluids and moisture away from the unit. Otherwise, they could affect or damage surfa‐ ces or electrical components. Avoid pressing too hard when cleaning and do not use abrasive materials; otherwise, damage can result.◀
Special feature on the Control Display If necessary, a microfiber cloth dampened with glass cleaner can also be used for cleaning the Control Display.
Moisten microfiber cloth only slightly Moisten microfiber cloth only slightly, oth‐
erwise, damage may result.◀ Suitable glass cleaners are available from the service center. Long-term vehicle storage Your service center can advise you on what to consider when storing the vehicle for longer than three months.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
299
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Reference
This chapter contains technical data, short commands for the voice activation system, and an index that will quickly take you to the information you need.
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Reference
Technical data
Technical data Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment
Dimensions Width, height
is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
1 Vehicle height without roof-mounted aerial:
56.3 inches/1,430 mm
Vehicle height with roof-mounted aerial: 56.7 inches/1,442 mm
2 Vehicle width, without mirrors: 71.3 inches/
3 Vehicle width with mirrors: 79.9 inches/
1,811 mm
2,031 mm
302
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Length, wheel base
Technical data
Reference
1 Wheel base: 110.6 inches/2,810 mm
2 Vehicle length: 182 inches/4,624 mm
Smallest turning circle Dia.: 37 ft/11.3 m
Engine specifications The rated power outputs are established on the basis of fuel grade AKI 91. 328i Displacement No. of cylinders Maximum output at engine speed Maximum torque at engine speed
hp rpm lb ft/Nm rpm
cu in/cm³
121.8/1,997
245
5,000–6,500
258/350
1,250–4,800Online Edition for Part no. 01 40 2 608 633 - 11 09 490
303
Reference
Technical data
335i Displacement No. of cylinders Maximum output at engine speed Maximum torque at engine speed
cu in/cm³
hp rpm lb ft/Nm rpm
181.7/2,979
306
5,800–6,000
295/400
1,200–5,000Weights The values preceding the slash apply to vehicles with manual transmission; the values following 328i Approved gross vehicle weight
Load Approved front axle load Approved rear axle load Approved roof load capacity Trunk capacity
335i Approved gross vehicle weight
Load Approved front axle load Approved rear axle load Approved roof load capacity Cargo area capacity
the slash apply to vehicles with automatic trans‐ mission.
lbs kg lbs/kg lbs/kg lbs/kg lbs/kg cu ft/l
lbs kg lbs/kg lbs/kg lbs/kg lbs/kg cu ft/l
4,409/4,453
2,000/2,020
903/410
2,061/935
2,513/1,140
165/75
16.9/4804,541/4,563
2,060/2,070
903/410
2,160/980
2,524/1,145
165/75
16.9/480304
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Technical data
Reference
Capacities
Fuel tank
US gal/liters
approx. 15.8/60
Windshield and headlamp washer system
US quarts/liters
approx. 3.1/3
Notes Fuel quality, refer to page 262
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
305
Reference
Short commands of the voice activation system
Short commands of the voice activation system Vehicle equipment All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equip‐ ment or country variant. This also applies for safety-related functions and systems.
General information Instructions for voice activation system, refer to page 23. To have the available spoken instructions read out loud: ›Voice commands‹
Adjusting Vehicle
Function Open the main menu. Open the options. Open the settings. Info display of the instrument cluster. Settings on the Control Display. Open the time and date. Open the language and units. Open the speed limit. Open the light. Open the door lock. Open the profiles. Open the Driving Mode menu. Open the ECO PRO menu.
Command ›Main menu‹ ›Options‹ ›Settings‹ ›Info Display‹ ›Control display‹ ›Time and date‹ ›Language and units‹ ›Speed‹ ›Lighting‹ ›Door locks‹ ›Profiles‹ ›Driving mode‹ ›ECO PRO mode‹
306
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Short commands of the voice activation system Reference
Equipment
Function Open the air conditioning settings. Open the Head-up Display.
Vehicle information Owner's Manual
Function Open the Owner's Manual. Open the Quick Reference Guide. Open the index. Open the search by pictures.
Computer
Function Call up the onboard computer. Call up the trip computer.
Vehicle
Function Open the vehicle information. Open the vehicle status. Open the hybrid display. Open sport displays. Call up ECO PRO tips. Open EfficientDynamics menu. Split screen hybrid display. EfficientDynamics split screen.
Command ›Climate‹ ›head up display‹
Command ›Display Owner's Manual‹ ›Quick reference‹ ›Owner's Manual‹ ›Search by pictures‹
Command ›Onboard info‹ ›Trip computer‹
Command ›Vehicle info‹ ›Vehicle status‹ ›Hybrid‹ ›Sport displays‹ ›ECO PRO Tips‹ ›Efficient Dynamics‹ ›Splitscreen, Hybrid mode‹ ›Split screen Efficient Dynamics‹
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
307
Reference
Short commands of the voice activation system
Navigation General information
Function Opens the Navigation menu. Open the destination entry. Enter the address. Enter a town/city. Enter a state/province. Enter the postal code. Open destination guidance. Start destination guidance. Terminate destination guidance. Open the home address. Open the route criteria. Open the route. Turn on spoken instructions. Repeat the spoken instruction. Turn off spoken instructions. Display the address book. Display the most recent destinations. Open the traffic bulletins. Special destinations.
Map
Function Display the map. Map facing north. Map facing the direction of travel.
Command ›Navigation‹ ›Enter address‹ ›Enter address‹ ›City‹ ›State‹ ›Postal Code‹ ›Guidance‹ ›Start guidance‹ ›Stop guidance‹ ›Home address‹ ›Route preference‹ ›Route information‹ ›Switch on voice instructions‹ ›Repeat voice instructions‹ ›Switch off voice instructions‹ ›Address book‹ ›Last destinations‹ ›Traffic Info‹ ›Points of interest‹
Command ›Map‹ ›Map facing north‹ ›Map in direction of travel‹
308
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Short commands of the voice activation system Reference
Function Perspective map. Automatic scaling of the map. Scale...feet. Scale...meters. Scale...kilometers.
Scale...miles.
Split screen settings
Function Split screen. Switch off the split screen. Adjust the split screen. Split screen, map facing north. Split screen, current position. Split screen, facing the direction of travel. Split screen, perspective. Split screen, expanded intersection zoom. Split screen scale...feet.
Split screen scale...meters.
Split screen scale...kilometers.
Split screen scale...miles.
Split screen, highlight the traffic situation. Split screen, computer.
Command ›Map perspective view‹ ›Map with automatic scaling‹ ›Map scale ... feet‹ ›Map scale ... meters‹ e.g., map scale 100 meters ›Map scale ... kilometers‹ e.g., map scale 5 kilo‐ meters ›Map scale ... miles‹ e.g., map scale 5 miles
Command ›Switch on splitscreen‹ ›Turn off split screen‹ ›Split screen content‹ ›Split screen map facing north‹ ›Split screen current position‹ ›Split screen map in direction of travel‹ ›Split screen perspective‹ ›Splitscreen Exit ramp view‹ ›Split screen scale ... feet‹ e.g., split screen scale 100 feet ›Split screen scale ... meters‹ e.g., split screen scale 100 meters ›Split screen scale ... kilometers‹ e.g., split screen scale 5 kilometers ›Split screen scale ... miles‹ e.g., split screen scale 5 miles ›Split screen, Traffic conditions‹ ›Split screen on board info‹
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
309
Reference
Short commands of the voice activation system
Function Split screen, trip computer. Split screen, scale automatically.
Command ›Splitscreen trip computer‹ ›Split screen automatic scaling‹
Destination guidance with intermediate destinations
Function Enter a new destination. Trip list.
Radio FM
Function Open a frequency.
Open the radio. Open the FM stations. Open the manual search. Select a frequency range. Open a station.
AM
Function Open a frequency.
Open the AM stations. Open the manual search.
Command ›Enter address‹ ›Stored trips‹
Command ›Frequency ... megahertz‹ e.g., 93.5 megahertz or frequency 93.5
›Radio‹ ›F M‹ ›Manual‹ ›Select frequency‹ ›Select station‹Command ›Frequency ... Kilohertz‹ e.g., frequency 753 or 753 kilohertz ›A M‹ ›Manual‹
310
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Short commands of the voice activation system Reference
Satellite radio
Function Open the satellite radio. Switch on the satellite radio. Select a satellite radio channel.
Stored stations
Function Open the stored stations. Choose a stored station. Select a stored station.
CD/Multimedia CD/DVD drive
Function Select a track.
Play back a CD. Select a CD. Select a CD and track. Open the CD and Multimedia menus. CD and DVD. Select a DVD. Display the entertainment details on a split screen.
Command ›Satellite radio‹ ›Satellite radio on‹ ›Select satellite radio‹ e.g., satellite radio channel
Command ›Presets‹ ›Select preset‹ ›Preset ...‹ e. g., stored station 2
Command ›Track ...‹ e.g., track 5
or ›C D track ...‹ e.g., CD track 5
›C D on‹ ›Select C D‹ ›C D ... track ...‹ e.g., CD 3 track 5
›C D and multimedia‹ ›C D‹ ›D V D ...‹ e.g. DVD 3
›Entertainment details‹Online Edition for Part no. 01 40 2 608 633 - 11 09 490
311
Reference
Short commands of the voice activation system
Music collection
Function Search for music, open a menu. Open the current playback. Open the music collection. Play back the music collection. Play back the most frequently played tracks.
Command ›Music search‹ ›Current playback‹ ›Music collection‹ ›Music collection on‹ ›Top fifty‹
External devices
Function Open the external devices. Open the Bluetooth devices. AUX at front.
Tone
Function Open the tone settings.
Telephone
Function Dial a phone number. Opens the Telephone menu. Display the phone book. Redialing. Display received calls. List of messages. Open the Bluetooth devices.
Command ›External devices‹ ›Bluetooth‹ ›AUX front‹
Command ›Tone‹
Command ›Dial number‹ ›Telephone‹ ›Phonebook‹ ›Redial‹ ›Received calls‹ ›Messages‹ ›Bluetooth‹
312
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
Short commands of the voice activation system Reference
Office
Function Open the Office menu. Display Office Today. Display the contacts. Display the messages. Display the calendar. Display the tasks. Display the reminders.
Contacts
Function Select a name. My contacts. Open the contacts. New contact.
Command ›Office‹ ›Current office‹ ›Contacts‹ ›Messages‹ ›Calendar‹ ›Tasks‹ ›Reminders‹
Command ›Choose name‹ ›My contacts‹ ›Contacts‹ ›New contact‹
BMW Assist or ConnectedDrive
Function Open BMW Assist. Open ConnectedDrive. Open BMW Search.
Command ›B M W Assist‹ ›Connected Drive‹ ›B M W Online‹
Online Edition for Part no. 01 40 2 608 633 - 11 09 490
313
Reference
Everything from A to Z
Everything from A to Z Index ABS, Antilock Brake Sys‐ tem 104 ACC, Active Cruise Control with Stop & Go 109 Activated-charcoal filter 139 Active Blind Spot Detec‐ tion 101 Active Cruise Control with Stop & Go, ACC 109 Active Protection 102 Adaptive brake lights, refer to Brake force display 102 Adaptive light control 88 Additional telephone 228 Additives, oil 275 Adjustments, seats/head re‐ straints 45 After washing vehicle 297 Airbags 91 Airbags, indicator/warning light 92 Air circulation, refer to Recir‐ culated-air mode 135, 138 Air distribution, manual 135, 138 Air drying, refer to Cooling function 135, 137 Air flow, air conditioner 135 Air pressure, tires 263 Air vents, refer to Ventila‐ tion 139 Air volume, automatic climate control 138 Alarm system 40 Alarm, unintentional 41 All around the center con‐ sole 14 All around the headliner 15
All around the steering wheel 12 All-season tires, refer to Win‐ ter tires 270 Alternating-code hand-held transmitter 142 Alternative oil types 275 AM/FM station 190 Announcement, navigation, refer to Spoken instruc‐ tions 178 Antifreeze, washer fluid 66 Antilock Brake System, ABS 104 Anti-slip control, refer to DSC 104 Applications 255 Appointments 243 Approved engine oils 275 Apps 255 Apps, video playback 213 Arrival time 82 Ash tray 145 Assistance, Roadside Assis‐ tance 291 Assistance when driving off 108 Assist, BMW 250 Assist system information, on Control Display 85 Audio playback 199 Audio playback, Blue‐ tooth 213 AUTO intensity 137 Automatic car wash 296 Automatic climate con‐ trol 134 Automatic climate control with enhanced features 136 Automatic Cruise Control with Stop & Go 109
Automatic Curb Monitor 52 Automatic deactivation, front passenger airbags 93 Automatic headlamp con‐ trol 87 Automatic locking 37 Automatic recirculated-air control 138 Automatic transmission with Steptronic 67 AUTO program, automatic cli‐ mate control 137 AUTO program, climate con‐ trol 135 AUTO program, intensity 137 Auto Start/Stop function 61 AUX-IN port 210 Average fuel consumption 82 Average speed 82 Axle loads, weights 304 Backrest curvature, refer to Lumbar support 47 Backrest, width 47 Backup camera 123 Balance 188 Band-Aids, refer to First aid kit 291 Bar for tow-starting/tow‐ ing 294 Bass 188 Battery replacement, vehicle battery 287 Battery replacement, vehicle remote control 30
