Login- Download PDF Manual
-
7. Move the highlight marker to the second
field from the top, select "Phone" and press the controller.
8. Select "Pair new phone" and press the con-
troller.
9. Select "Start pairing" and press the control-
ler.
Preparation via the mobile phone 10. Further steps must be carried out with the mobile phone and vary depending on the model. Please refer to your mobile phone's operating instructions, e.g. under the topics of Searching for a Bluetooth device, Linking or Pairing. The Bluetooth name of the vehicle also appears on the mobile phone display.
11. Select the Bluetooth name of the vehicle on
the mobile phone display.
Pairing Depending on your mobile phone, you will see messages, first on the mobile phone display or on the iDrive, requesting you to enter the same Bluetooth passkey previously determined by you. 12. Enter the Bluetooth passkey.
Depending on the mobile phone, you will have approx. 30 seconds to enter your Bluetooth passkey on the mobile phone and the Control Display.
The Bluetooth name of the vehicle is dis- played.
184
13. Move the highlight marker to the third field from the top, select "Confirm passkey" and press the controller.
14. Wait several seconds until the "Communi-
cation" menu is displayed.
The next time you use the mobile phone inside the vehicle, it will be recognized within no more than 2 minutes as long as the engine is running or the ignition is switched on.
With some mobile phones it may be nec- essary to make certain settings for a per- manent Bluetooth link, e.g. using the authoriza- tion or secure connection menu item, refer to your mobile phone's operating instructions.<
1. Select "Restart pairing" and press the con-
troller.
2. Repeat steps 9 to 14. If pairing fails again, contact BMW Customer Relations. To call BMW Customer Relations: Select "Help" and press the controller.
The phone number for BMW Customer Rela- tions and information necessary for pairing appear on the display. In mobile phones that are already connected, you can select the BMW Customer Relations phone number to place the call.
As soon as a mobile phone is detected by the vehicle, the phone book entries stored on the SIM card or on your mobile phone are transmit- ted to the vehicle. This data transfer depends on your mobile phone and can take several min- utes; please refer to your mobile phone's oper- ating instructions, if necessary. If not all phone book entries are displayed: > Transfer all phone book entries from the
SIM card to the mobile phone, if necessary. > Phone book entries with special characters
may not be displayed.
Up to four mobile phones can be paired, one after the other. If a fifth mobile phone is paired, the pairing data for the mobile phone whose pairing data was first stored on the vehicle is deleted.
Checks to perform if pairing is unsuccessful > Is the mobile phone supported by the
mobile phone preparation package? You can obtain information on the Internet at: www.bmw.com.
> Do the Bluetooth passkeys on the mobile phone and vehicle match? The same Blue- tooth passkey must be entered on the mobile phone's display and via iDrive.
> Did it take you more than 30 seconds to
enter the Bluetooth passkey?
> Only a limited number of devices can be
connected with the mobile phone. If neces- sary, delete connections with other devices. > Is the mobile phone no longer responding?
Switch the mobile phone off and on or briefly disconnect the power supply.
To repeat pairing:
List of paired mobile phones Mobile phones with pairing data stored by the vehicle can be displayed. If several mobile phones are detected by the vehicle at the same
185
i
time, the mobile phone at the top of the list can be operated via the vehicle. You can change the order of the mobile phones on the list. As long as a mobile phone from this list is selected, you cannot operate the mobile phones via the vehicle. iDrive, for operating principle refer to page 16. 1. Press the button to call up the start
menu.
2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Bluetooth" and press the controller. 5. Move the highlight marker to the second
field from the top, select "Phone" and press the controller.
6. Select the desired mobile phone and press
the controller.
Unpairing the mobile phone from the vehicle Should you no longer wish to operate a mobile phone via the vehicle, you can delete the mobile phone's pairing data. iDrive, for operating principle refer to page 16. 1. Switch off the mobile phone. 2. Press the
button to call up the start
menu.
3. Press the controller to open the menu. 4. Select "Settings" and press the controller. 5. Select "Bluetooth" and press the controller.
"Bluetooth" is selected.
6. Move the highlight marker to the second
field from the top, select "Phone" and press the controller.
7. Select the desired mobile phone and press
the controller.
7. Select "Move device up" and press the con-
troller.
8. Select "Delete device" and press the con-
troller.
The selected mobile phone moves up one posi- tion on the list.
The unpaired mobile phone is deleted from the list. The phone book entries and the lists of stored phone numbers are deleted as well.
186
Activating/deactivating the Bluetooth link
The use of Bluetooth technology is not permitted in all countries. Observe all
applicable local regulations. Temporarily deac- tivate the Bluetooth link between the vehicle and the mobile phone, if necessary. If the Bluetooth link is deactivated, you can no longer operate the mobile phone via the vehicle, and other devices with a Bluetooth interface can be used in combination with the mobile phone, e.g. a laptop.< To temporarily deactivate the Bluetooth link between the vehicle and your mobile phone: 1. Press the
button to call up the start
menu.
2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Bluetooth" and press the controller.
5. Move the highlight marker to the second field from the top, select "Settings" and press the controller.
6. Select "Bluetooth communication active"
and press the controller to activate or deac- tivate the link.
The Bluetooth link is activated. The Bluetooth link is deactivated.
Adjusting volume
Turn the knob during a call to select the desired volume. This volume for the hands-free system is main- tained, even if the other audio sources are set to minimum volume. You can also adjust the volume with buttons on the steering wheel, refer to page 10. The setting is stored for the remote control cur- rently in use.
Operation via iDrive You can operate the following functions using iDrive: > Accepting/rejecting calls > dialing phone numbers > Selecting phone numbers from the phone
book
187
i
> Selecting stored phone numbers, e.g. from
1. Press the
button to call up the start
the list of accepted calls
menu.
> Ending a call When the ignition and radio readiness are switched off, e.g. after taking the remote control out of the ignition switch, you can continue an ongoing call via the hands-free system for no more than 25 minutes.
Voice quality If the person you are talking to is having difficul- ties understanding you, this may be due to excessive background noise. The full mobile phone preparation package can compensate for these noises to a certain extent. To optimize voice quality during a call, we recommend that you: > Reduce background noise, e.g. by closing
the windows, reducing air flow from the automatic climate control or by pointing the open front air vents downward
> Reduce the volume of the hands-free sys-
tem
Requirements > The mobile phone's pairing data are stored by the vehicle and the mobile phone is oper- ational.
> The engine is running or the ignition is
switched on.
> The mobile phone is recognized by the
vehicle.
Calling up communication Many of the functions described below are con- trolled using the "Communication" menu. iDrive, for operating principle refer to page 16.
188
2. Move the controller forwards to call up
"Communication".
Receiving calls If you have the phone number of the caller stored in the phone book and the phone num- ber has been transmitted, the name of the entry is displayed.
button on the steering wheel.
Accepting a call press the Alternatively: "Accept" is selected. Press the controller.
Rejecting a call Select "Reject" and press the controller. The caller is diverted to your mailbox if it has been activated.
Calling
Dialing phone numbers 1. Select "Phone" and press the controller.
Via programmable memory keys You can store phone numbers on the program- mable memory keys to call these numbers directly, refer to page 21.
Ending a call Press the Alternatively: 1. Select the phone number and press the
button on the steering wheel.
controller.
2. Select "Dial" and press the controller. 3. Enter the desired phone number by select- ing the digits individually and pressing the controller. Always enter the complete phone number consisting of national dialing code, area code, and phone number. The letters correspond to the numbers on the keypad of the mobile phone. To delete the last digit: Move the controller towards the right to select the arrow ler.
and press the control-
4. Select "Dial number" and press the control-
ler. Alternatively: press the steering wheel.
button on the
2. "End call" is selected.
Press the controller.
For your phone number to be displayed to the person you are talking to, the display of phone numbers must be enabled by your provider.
Selecting a phone number from the phone book or from a list of stored phone numbers Phone numbers you have dialed, received calls and phone book entries are stored in lists when the mobile phone is linked to the vehicle via Bluetooth. If the caller is listed in the phone book, the name of the entry is displayed instead of the phone number. You can select the desired subscriber from the list and establish the connection. Five lists are available: > "A - Z"
The entries in your mobile phone's phone
189
i
book, consisting of names and phone num- bers, are sorted alphabetically.
4. Select the desired entry and press the con-
troller.
5. Select "Call" and press the controller.
The system dials the number.
If different phone numbers are stored in the mobile phone under one name, e.g. office and home, the name is shown once for each phone number. You can change a phone number stored in the phone book, e.g. to call a specific extension: 1. Select "Phone" and press the controller. 2. Select "A - Z" and press the controller. 3. Select the desired entry and press the con-
troller.
4. Select "Add digits" and press the controller. 5. Change the phone number. 6. Select "Dial number" and press the control-
ler.
Dialing a stored phone number from a list To select an entry and establish a connection:
> "Top 8"
The eight numbers dialed most frequently from the "A - Z" phone book are automati- cally stored in the Top 8 list.
> "Redial"
The last eight phone numbers you have dialed are automatically stored. The last number dialed is at the top of the list.
> "Missed calls"
The phone numbers of the last eight rejected calls are stored. This requires the telephone number of the caller to have been transmitted.
> "Received calls"
The phone numbers of the last eight accepted calls are stored. This requires the telephone number of the caller to have been transmitted.
Selecting phone numbers from phone book The "A - Z" list is available for your phone book entries. The phone book entries appear on the Control Display. 1. Select "Phone" and press the controller.
2. Select "A - Z" and press the controller. 3. To limit the number of displayed entries, select the initial letter of the desired entry and press the controller.
190
1. Select "Phone" and press the controller. 2. Select a list and press the controller:
Deleting the entire list 1. Select an entry from the list and press the
> "Top 8" > "Redial" > "Missed calls" > "Received calls"
controller.
2. Select "Delete all numbers" and press the
controller.
3. Select the desired entry and press the con-
troller.
4. Select "Call" and press the controller.
The system dials the number.
Deleting an individual entry 1. Select the desired entry from the list and
press the controller.
2. Select "Delete" and press the controller.
The entry is deleted.
3.
If applicable, select "Yes" and press the controller. The list is deleted.
BMW Contact* If BMW Assist has not been enabled for you, you can have several service numbers dis- played: > BMW Roadside Assistance* if you need
help in the event of a breakdown
> BMW Service if you wish to schedule a ser-
vice appointment, for example
> BMW Customer Relations* for information
related to your vehicle
If BMW Assist is enabled, refer to page 197. You can dial the displayed service numbers if your mobile phone has been paired with the vehicle: iDrive, for operating principle refer to page 16. 1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
"Communication".
191
i
3. Select "BMW Contact" and press the con-
1. Establish connection.
troller.
4. Select "BMW Contact Numbers" and press
bottom field is selected.
2. Move the controller backwards until the
the controller.
3. Select the desired touch-tone character
and press the controller. Each selection is transmitted immediately and is confirmed by a tone, depending on the type of mobile phone you are using.
5. Select one of the following menu items and
press the controller: > "Roadside Assistance" > "Customer Relations" > "Service Request"
6. Select "Call" and press the controller. Contact will be established.
Dialing phone numbers via touch tones Touch-tone dialing is required for access to network services or for controlling devices, e.g. for remote querying on an answering machine. This function is available whenever there is a connection.
192
Switching between mobile phone and hands-free system
From mobile phone to hands-free system* You can continue ongoing calls outside of the vehicle's Bluetooth range via the hands-free system as long as the engine is running or the ignition is switched on. Depending on your mobile phone, the system automatically switches to hands-free mode. With mobile phones that do not automatically switch to hands-free mode: > Depending on the type of mobile phone you are using, it may be possible to continue the conversation via the hands-free system. Refer to the display on your mobile phone
and/or your mobile phone's operating instructions.
> Press the
button above the storage
compartment. The changeover can take several seconds.
From hands-free system to mobile phone If you are making a call via the hands-free sys- tem, it may be possible to continue the call via the mobile phone, depending on your mobile phone model. Refer to the display on your mobile phone and/or your mobile phone's oper- ating instructions. Alternatively, you can deactivate the Bluetooth link. Depending on the type of mobile phone you are using, it may occur that calls are switched from the hands-free system to the mobile phone if reception of the wireless network is poor.
Operation by voice commands*
The concept You can operate your mobile phone without having to take a hand off the steering wheel. During your entries, you will be guided in many cases by announcements or questions. The same prerequisites apply as for operation via iDrive, refer to page 187.
Symbols in the Owner's Manual
{...}Say the specified commands word for word. {{...}} Indicates responses of the system.
Saying commands
Activating the system 1. Briefly press the
button on the steering
wheel. A sound signal indicates that you can say commands.
2. Say the command.
Ending/canceling operation by voice commands Press the or
button on the steering wheel
{Cancel}.
In dialogs where text is spoken, e.g. a name rather than a command, canceling is only possi- ble using the button on the steering wheel.
Having the possible commands read aloud The system recognizes specific commands that must be pronounced exactly word for word. You can have the possible commands for any function read aloud to you:
{Help}
Using alternative commands Often there is more than a single command to run a function, e.g.:
{Dial name} or {Name}.
Digits from zero to nine are recognized. You can say each digit individually or group them into a sequence to accelerate the input.
193
Example: dialing phone numbers Start the dialog: Press the Command {Dial number} e.g. {123 456 7890}
button on the steering wheel.
{Dial}
Voice control response {{Please say the number}} Depending on your equipment version: {{123 456 7890. Continue?}} or {{123 456 7890. And next?}} {{Dialing number}}
Correcting phone numbers After the last spoken sequence of digits has been repeated by the system, you can delete this sequence of digits. {Correct number}. The digits are deleted.
The command {Correct number} can be repeated as often as you like.
Deleting phone numbers
{Delete}.
All digits entered up to this point are deleted.
Voice phone book The phone book entries can be called up auto- matically from your mobile phone's memory.
Selecting an entry The connection to the phone number of the selected entry is established.
1.
{Dial name}. The dialog for selecting an entry is opened.
2. Say the name when prompted. 3. Confirm the prompt with {Yes}.
Redialing The {Redial} command calls up "Redial".
Adjusting the volume of the instructions You can adjust the volume for the instructions from the system:
Turn the button during an instruction. This volume for the instructions is maintained, even if the other audio sources are set to mini- mum volume. The setting is stored for the remote control cur- rently in use.
Calling
Dialing phone numbers
{Dial number}.
1. 2. Say the phone number.
For telephone calls abroad, say {Plus} and then the country code. {Dial}.
3.
The connection to the desired subscriber is established.
194
Notes
Important for voice commands For voice commands, bear in mind the follow- ing: > Pronounce the commands smoothly and at normal volume, avoiding excessive empha- ses and pauses.
> Keep the doors, windows and glass roof
closed to prevent interference from outside noise.
> Avoid ambient noise in the vehicle while
speaking.
Inserting/removing snap-in adapter 1. Press area 1 around the button and take off
the cover*.
To remove the snap-in adapter: Press area 1 around the button.
Inserting mobile phone 1.
If applicable, remove the protective cap from the mobile phone's antenna connector so that the mobile phone can engage in the snap-in adapter.
2. With its buttons facing upward, slide the
mobile phone up towards the electrical con- tact points and press it downward until it engages.
2.
Insert the snap-in adapter in the front and press it downward until it engages.
The mobile phone's battery is charged as soon as the vehicle is in radio readiness or the steer- ing is unlocked.
To conserve battery power, you should avoid using the mobile phone when the
ignition is switched off.<
195
i
Removing mobile phone
Press the button.
196
* BMW Assist
BMW Assist provides you with various services. For example, the position data of your vehicle can be transmitted to the BMW Assist Response Center if an Emergency Request* has been sent. Many BMW Assist services depend on the indi- vidually agreed contract. After your contract has expired, the BMW Assist system will be deactivated by the BMW Assist Response Center without you hav- ing to visit a BMW center. After the BMW Assist system has been deactivated, no BMW Assist service will be available. The BMW Assist sys- tem can be reactivated by a BMW center after a new contract has been signed.
Requirements You can use BMW Assist when the following requirements are met: > The installed BMW Assist system is logged on to a mobile phone network. This network must be capable of transmitting the ser- vices.
> To transmit position data, the vehicle must
be able to determine the current position.
> To activate and update BMW Assist, a GPS
signal must be available.
> You have subscribed to BMW Assist with your BMW center or with the BMW Assist Response Center. Enabling must have been completed.
> BMW Assist is activated, refer to page 202.
Offered services The following services are available via BMW Assist: > Emergency Request, refer to page 235:
When you press the SOS button, a connec- tion is established to the BMW Assist Response Center. The BMW Assist
Response Center contacts you and takes further steps to help you.
> Automatic Collision Notification:
Under certain conditions, a connection is established to the BMW Assist Response Center after a serious accident. If possible, the BMW Assist Response Center contacts you and takes further steps to help you.
> Enhanced Roadside Assistance:
You can call BMW Roadside Assistance* should you require help in the event of a breakdown. If possible, the vehicle data and position data are transmitted during this call.
> Customer Relations:
For all information related to your vehicle you can be connected with BMW Customer Relations.
> TeleService:
Data on your vehicle's service status or required inspections are transmitted to your BMW center either automatically before a service due date or when you request a BMW service appointment.
> Remote Door Unlock:
Contact the BMW Assist Response Center if your remote control or key is not available and you would like to have the vehicle unlocked.
> Stolen Vehicle Recovery:
After you report your vehicle stolen with the police, call the BMW Assist Response Cen- ter to determine its position.
In addition, optional services can be provided to you, such as the Concierge service or informa- tion on directions, traffic or the weather. You can use Critical Calling to activate a limited number of calls via the BMW Assist Response Center, e.g. when you do not have your mobile phone with you. Press the SOS button in order to contact the BMW Assist Response Center, see below.
197
t
You can also access BMW Assist Concierge services via the Internet.
1. Press the
button.
This opens the start menu.
Characteristics of the offered services The following characteristics apply to the ser- vices: > The services offered are country-specific. > Voice contact is established or data are
transferred, depending on the equipment and the country. In some countries, it is possible to do both.
> The data transmitted can be vehicle data, for example, your current position or the Condition Based Service CBS data.
Using services
Contacting the BMW Assist Response Center You can contact the BMW Assist Response Center via the SOS button. 1. Briefly press the cover flap to open.
The arrangement of the switches and indi- cator lamps varies slightly among vehicle equipment versions.
2. Move the controller forwards to select
3.
"Communication". If necessary, move the highlight marker to the uppermost field. Turn the controller until "BMW Assist" is selected and press the controller.
4. Select "Roadside Assistance" and press
the controller.
2. Press the button for at least 2 seconds. The BMW Assist Response Center will connect you with BMW Roadside Assistance.
Roadside Assistance iDrive, for operating principle refer to page 16.
If the current location can be determined, the current vehicle position is displayed. 5. Select "Start service" and press the con-
troller.
The BMW Assist Response Center will connect you with BMW Roadside Assistance.
198
TeleService
Automatic service notification* The data on the service status of your vehicle or on required inspections are transmitted auto- matically prior to the due date. You can check when the BMW center was notified. 1. Press the
button.
This opens the start menu.
2. Press the controller to open the menu. 3. Select "Info sources" and press the control-
ler.
4. Select "Service Info" and press the control-
5.
ler. If necessary, move the highlight marker to the uppermost field. Turn the controller until "Service requirements" is selected and press the controller.
6. Select "Auto Request" and press the con-
troller.
Manual service notification You can transmit data regarding your vehicle's service status to your BMW center when you wish to arrange a service appointment. 1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
3.
"Communication". If necessary, move the highlight marker to the uppermost field. Turn the controller until "BMW Assist" is selected and press the controller.
4. Select "Service Request"
5. Press the controller.
199
t
6. Select "Start service" and press the con-
troller.
The service-relevant data are transmitted. Your BMW center will contact you to arrange a ser- vice appointment.
Contacting BMW Customer Relations For all information related to your vehicle you can call BMW Customer Relations. 1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
3.
"Communication". If necessary, move the highlight marker to the uppermost field. Turn the controller until "BMW Assist" is selected and press the controller.
Concierge service* When you call the BMW Assist Concierge, you can obtain information about, e.g., current events, gas stations or hotels, as well as receive the corresponding telephone numbers and addresses. Many hotels can be booked directly through the BMW Assist Concierge service. Concierge service requires additional enabling by the BMW Assist Response Center.
Calling the Concierge 1. Press the
button.
This opens the start menu.
2. Move the controller forwards to select
3.
"Communication". If necessary, move the highlight marker to the uppermost field. Turn the controller until "BMW Assist" is selected and press the controller.
4. Select "Customer Relations".
4. Select "Concierge" and press the control-
ler.
5. Press the controller. 6. Select "Start service" and press the con-
troller.
The BMW Assist Response Center will connect you with BMW Customer Relations.
5. Select "Start Service" and press the con-
troller.
The BMW Assist Response Center will connect you with a BMW Assist Concierge.
200
Displaying transmitted data Select a received message, if applicable, and press the controller.
3. Turn the controller until "Settings" is
selected and press the controller.
Dialing a phone number or transferring an address for destination guidance 1. Select "Options" and press the controller.
4. Turn the controller until "BMW Service set- tings" is selected and press the controller.
2. Select a menu item: > Press "Call" to make a telephone call. A pre-
requisite for this is that your Bluetooth mobile phone has been paired with the vehicle.
> Press "Select as destination" to transfer the address to the navigation system for desti- nation guidance.
Adapting BMW Assist
Displaying and updating services If the services offered by BMW Assist change, you will be notified. In that event you may update the service functions. 1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
5.
6.
If necessary, move the highlight marker to the uppermost field. Turn the controller until "Enabled services" is selected and press the controller. The currently available BMW Assist ser- vices are displayed. If necessary, select "Options" and press the controller.
7. Select "Update services" and press the
controller.
Terminating services* When you terminate the services, the connec- tion to BMW Assist is deactivated.
201
1. Press the
button.
This opens the start menu.
2. Press the controller to open the menu. 3. Turn the controller until "Settings" is
selected and press the controller.
4. Turn the controller until "BMW Service set- tings" is selected and press the controller.
Requirements > Make sure that the vehicle can determine its
current location. Reception is best when you have an unobstructed view to the sky. > Leave vehicle ignition switched on during
the activation process.
Activating 1. Press the
button.
This opens the start menu.
5.
If necessary, move the highlight marker to the uppermost field. Turn the controller until "Enabled services" is selected and press the controller.
6. Select "Options" and press the controller.
2. Press the controller to open the menu. 3. Turn the controller until "Settings" is
selected and press the controller.
7. Select "Terminate services" and press the
controller.
BMW Assist is blocked from use, and your vehi- cle's current position will not be transmitted in case of an Emergency Request*. To unblock the services, reactivate BMW Assist, see below. The contractual agreement is not affected by this. Reactivate BMW Assist, if necessary, to log on again.
Activating BMW Assist BMW Assist must be activated to use the ser- vices.
202
4. Turn the controller until "BMW Service set- tings" is selected and press the controller.
5.
If necessary, move the highlight marker to the uppermost field. Turn the controller
until "Enabled services" is selected and press the controller.
3. Select "Settings" and press the controller.
6. Select "Enable services" and press the con-
the controller.
4. Select "BMW Service settings" and press
troller. BMW Assist is activated and data exchange with the BMW Assist Response Center begins.
5.
If necessary, move the highlight marker to the uppermost field. Turn the controller until "Profile" is selected and press the con- troller.
Activation takes a few minutes. Progress status is displayed on the Control Display. If you open another menu, the activation process continues in the background.
Displaying vehicle data When BMW Assist is activated, the license plate and the vehicle identification number of your vehicle may be displayed. 1. Open the start menu. 2. Press the controller to open the
menu.
203
