Login- Download PDF Manual
-
Correct wheels and tires When mounting new tires or changing over from summer to winter tires and vice versa, mount run-flat tires for your own safety. In the event of a flat, no spare wheel is available. Your BMW center will be glad to advise you.
BMW recommends that you use only wheel and tire combinations that BMW
has tested and approved for your particular vehicle. Variations in factors such as manufac- turing tolerances mean that even wheels and tires with identical official size ratings could actually have different dimensions, which could lead to body contact and thus to severe acci- dents. If non-approved wheels and tires are used, BMW cannot evaluate their suitability, and therefore cannot guarantee their driving safety.< You can inquire about the right wheel/tire com- bination at your BMW center. The correct combination of wheels and tires is also necessary to ensure reliable operation of various vehicle systems such as ABS, DSC or FTM. To maintain good handling and vehicle response, use only tires of a single brand and tread configuration. After a tire has been dam- aged, mount the previous wheel and tire combi- nation again as soon as possible.
Wheels with Tire Pressure Monitor TPM electronics When mounting new tires or changing over from summer to winter tires, or vice versa, only use wheels with TPM electronics; otherwise, the Tire Pressure Monitor may not be able to detect a puncture, refer to page 86. Your BMW center will be glad to advise you.
The manufacturing date of tires is contained in the tire coding: DOT ... 3209 means that the tire was manufac- tured in week 32 of 2009.
Run-flat tires
The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall. Run-flat tires comprise a conditionally self-sup- porting tire and a special rim. The reinforce- ment in the sidewalls ensures that the tire can continue to be used subject to certain restric- tions, even if depressurized. For information on continuing to drive with a flat tire, refer to Indication of a flat tire, page 85.
New wheels and tires
Have new wheels and tires installed only by your BMW center or tire shop that works according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a dan- ger of subsequent damage and related safety hazards. Make sure that the new wheels are bal- anced.<
Retreaded tires
BMW recommends that you do not use retreaded tires, since driving safety may be impaired. The causes for this include poten- tially different tire casing structures and often wide variations in tire age, which can result in a limited service life.<
216
Swapping wheels between axles BMW advises against swapping wheels between the front and rear axles, even if all tires have the same size, as this could impair driving characteristics. If the tires are of mixed sizes, swapping wheels between the axles is not per- missible.
Snow chains* Only certain fine-link snow chains have been tested by BMW, classified as safe for use and recommended. Consult your BMW center for more information. Snow chains must be mounted in pairs and on the rear wheels only. Observe the manufac- turer's instructions when mounting snow chains. Do not exceed a speed of 30 mph or 50 km/h.
Do not initialize the Flat Tire Monitor if snow chains are mounted; otherwise, the
instrument might issue an incorrect reading. When driving with snow chains, you may find it helpful to activate DTC temporarily, refer to page 82.<
Recommended tire brands
Certain makes of tire are recommended by BMW for each tire size. They are marked with a clearly visible BMW designation on the sidewall of the tire. When properly used, these tires meet the high- est standards in terms of safety and handling characteristics.
Special characteristics of winter tires BMW recommends winter tires for winter roads or at temperatures below +45°F/+76. Although all-season M+S tires provide better winter traction than summer tires, they gener- ally fail to provide the same levels of cold- weather performance as winter tires.
Pay attention to speed
Always comply with the speed limit for the winter tires mounted on your car; failure to do so could result in tire damage and acci- dents.< If the car is capable of speeds higher than that permitted for the winter tires, a label stating the maximum permitted speed for the mounted tires must be displayed in your field of view. Specialist tire dealers and your BMW center can supply these labels.
Storage Always store wheels and tires in a cool, dry place with as little exposure to light as possible. Always protect tires against all contact with oil, grease and fuels. Do not exceed the maximum tire inflation pressure indicated on the sidewall of the tire.
217
Under the hood
Do not work on the car unless you pos- sess the necessary technical knowledge.
If you are unfamiliar with the statutory guide- lines, have any work on the vehicle performed only by a BMW center or by a workshop that work according to BMW repair procedures with correspondingly trained personnel. If this work is not carried out properly, there is a danger of subsequent damage and related safety haz- ards.<
Closing
Let the hood drop from a height of approx. 10 in/ 25 cm. It must be clearly heard to engage.
Make sure that the closing path of the hood is clear; otherwise, injuries may
result. If you see any signs while driving your vehicle that the hood is not completely closed, stop at once and close it securely.<
Hood
Releasing
Pull the lever.
Opening
In order to avoid damage, make sure that the wiper arms are against the windshield
before you open the hood. Do not open the engine hood before the engine has cooled down; otherwise, injuries may result.< Press the release handle and open the hood.
218
Important parts of the engine compartment
1 Gasoline engine: expansion tank for cool-
3 Jump-starting connection, refer to
ant, refer to page 222
Diesel engine: the expansion tank is located on the other side of the vehiclepage 238
4 Filler neck for engine oil, refer to Adding
engine oil
2 Washer fluid filler neck for headlamp clean-
5 Dipstick for engine oil, refer to Checking oil
ing system and window washer system, refer to page 60
level
Engine oil The engine oil consumption is dependent on driving style and driving conditions.
Checking the engine oil level with the dipstick* 1. Park the vehicle on a level surface with the engine at operating temperature, i.e. after an uninterrupted drive of at least 6.5 miles/ 10 km.
2. Switch off the engine. 3. After approx. 5 minutes, pull out the
dipstick 5 and wipe it off with a lint-free cloth, paper towel or similar material.
4. Carefully push the dipstick all the way back
into the measuring tube and pull it out
again. The oil level must be between the two markings on the dipstick.
The oil quantity between the two markings on the dipstick is equivalent to approx. 1 US quart/ 1 liter.
219
The oil level must not be above the upper marking of the dipstick. Too much oil will
Possible displays
harm the engine.<
Checking the engine oil level electronically* Your car is equipped with an electronic oil-level monitor. For a precise measurement and display of the oil level, it is necessary that the engine be at operating temperature, i.e. after uninterrupted driving for at least approx. 6.5 miles/10 km. You can have the oil level displayed while you are driving, or while the vehicle is at a standstill on a level surface and the engine is running.
Display in the instrument cluster
1. Push button 1 in the turn indicator lever up
or down repeatedly until the appropriate symbol is shown in the display, accompa- nied by the word "OIL".
2. Press button 2 in the turn indicator lever.
The oil level is checked and the reading dis- played.
1 Oil level OK 2 Oil level is being checked.
This can take about 3 minutes if the car is at a standstill on a level surface, or about 5 minutes while the car is on the move.
3 Oil level down to minimum:
Add engine oil as soon as possible, but no more than 1 US quart/1 liter, refer also to Adding engine oil on page 221.
4 Oil level is too high.
Too much oil will harm the engine. Have the vehicle checked without
delay.<
5 The oil level sensor is defective.
Do not add engine oil. You can continue your journey. Note the newly calculated dis- tance remaining to the next oil service, refer to page 73. Have the system checked as soon as possible.
220
Display via iDrive 1. "Vehicle Info" 2. "Vehicle status"
3. "Engine oil level"
Too much oil will harm the engine. Have the vehicle checked without
delay.<
> "Measurement inactive. Have this
checked." Do not add engine oil. You can continue your journey. Note the newly calculated dis- tance remaining to the next oil service, refer to page 73. Have the system checked as soon as possible.
Adding engine oil
Possible messages > "Engine oil level OK" > "Measurement not possible at this time." > "Measuring engine oil level...":
This can take about 3 minutes if the car is at a standstill on a level surface and the engine is running, and about 5 minutes while the car is moving. If engine oil was added, it may take up to 30 minutes to obtain an oil level reading. > "Engine oil level below minimum. Add 1
quart!" Add engine oil as soon as possible, but no more than 1 US quart/1 liter, refer also to Adding engine oil below. If the oil level is below the minimum value, add engine oil immediately to avoid engine damage.
> "Engine oil level too high! Have this
checked."
Add a maximum of 1 US quart/1 liter of engine oil no earlier than when a corresponding mes- sage appears on the Control Display or, if the car has a diesel engine, when the oil level has dropped to just above the lower marking on the dipstick, refer to page 219.
Add oil within the next 125 miles/200 km; otherwise, the engine could be dam-
aged.<
Keep oils, greases, etc. out of the reach of children and comply with the relevant
warnings on the containers. Otherwise, health hazards may result.<
Oil change Have oil changed only at your BMW center or at a workshop that works according to BMW repair procedures with correspondingly trained personnel.
Oil types
Do not use oil additives as this could result in engine damage.<
221
Comply with the appropriate environ- mental protection regulations when dis-
posing of coolant additives.<
Checking coolant level 1. Do not open the engine hood before the
engine has cooled down.
2. Turn the cap of the expansion tank a little
counterclockwise to allow any accumulated pressure to escape, then continue turning to open.
3. The coolant level is correct if it is between
the maximum and minimum marks in the filler neck, refer also to the diagram next to the filler neck.
4.
If the coolant is low, slowly add coolant up to the specified level; do not overfill.
5. Turn the cap until there is an audible click. 6. Have the reason for the coolant loss elimi-
nated as soon as possible.
Specified engine oils Your service center can advise you on which engine oils have been approved by the manu- facturer of your vehicle. The engine oil quality is critical for the life of the engine. Approved oils can be identified by the following specification:
Gasoline engine Preferred:
Alternatively:
Diesel engine Preferred:
BMW Longlife-01
BMW Longlife-01 FE BMW Longlife-98BMW Longlife-04
Approved oils belong to the following viscosity classes: SAE 0W-40, SAE 0W-30, SAE 5W-40 and SAE 5W-30.
Alternative oil types If the approved engine oils are not available, up to 1 US quart/1 liter of another oil with the fol- lowing specification may be used: API SM or higher
Coolant
Do not add coolant to the cooling system when the engine is hot. Escaping coolant
can cause burns.< Coolant consists of half water and half additive. Not all commercially available additives are suit- able for your BMW. Ask your BMW center for suitable additives.
Only use suitable additives; otherwise, engine damage may result. Because
additives are harmful to your health, it is impor- tant to follow the instructions on the contain- ers.<
222
Maintenance
BMW Maintenance System
The BMW Maintenance System supports the preservation of the traffic and operating safety of your BMW. The objective is to optimize efforts with respect to minimal vehicle mainte- nance costs. If and when you come to sell your BMW, a com- prehensive record of servicing will prove a sig- nificant benefit.
Condition Based Service CBS Sensors and special algorithms take the differ- ent driving conditions of your BMW into account. Condition Based Service uses this to determine the current and future service requirements. By letting you define a service and maintenance regimen that reflects your own individual requirements, the system builds the basis for trouble-free driving. On the Control Display, you can have the remaining times or distances for selected main- tenance tasks and any legally prescribed dates displayed, refer to page 73: > Engine oil > Brake pads: separately for front and rear > Brake fluid > Vehicle check > Legally mandated inspections depending
on local regulations
> Diesel particulate filter*
Service data in the remote control Your vehicle continuously stores service- requirement information in the remote control while you are driving. Your BMW Service Advi- sor can read out this data from the remote con- trol unit, and propose an optimized mainte- nance approach. Whenever you take your car in for servicing you should therefore hand your BMW Service Advisor the remote control unit that you last used.
Make sure that the date is always set cor- rectly, refer to page 76; otherwise, the
effectiveness of Condition Based Service CBS is not assured.<
Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models Please consult your Service and Warranty Infor- mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service require- ments.
BMW recommends that you have service and repair operations performed at your
BMW center. Take the time to ensure that these service pro- cedures are confirmed by entries in your vehi- cle's Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models. These entries verify that your vehicle has received the speci- fied regular maintenance.<
223
Socket for Onboard Diagnosis OBD
On the driver's side is an OBD socket for check- ing components relevant to the composition of the vehicle's emissions.
Emissions
The warning lamp lights up: The vehicle is producing higher emis- sions. The trip can be continued. Have
the car checked as soon as possible.
Canadian models display this warning lamp.
The lamp flashes under certain conditions. This indicates excessive misfiring in the engine. If this happens, you should reduce your speed and visit your nearest BMW center as soon as possible. Severe engine misfiring can quickly lead to serious damage of emissions-related components, especially the catalytic converter. The warning lamp comes on if the gas cap is not properly tightened and the OBD system assumes that fuel vapor is escaping. Make sure that the gas cap is cor- rectly positioned and close it until it audibly clicks.
Data recorders Your vehicle may be equipped with one or sev- eral measuring or diagnostic modules or a device for recording or sending certain vehicle data or information. In addition, if you have signed a service contract for BMW Assist, cer- tain vehicle data may be transmitted or recorded in order to facilitate the corresponding services.
224
Care
Care products Regular cleaning and care contributes signifi- cantly to the value retention of your BMW. BMW recommends cleaning and caring for your vehicle with products that are approved by BMW for this purpose. Your BMW center will be happy to advise you on the products and services available for cleaning and caring for your BMW.
Original BMW Care Products have been material tested, laboratory checked and proven in the field, and offer optimal care and protection for your vehicle.<
Do not use cleaners that contain alcohol or solvents as these may result in dam-
age.<
Cleaning agents can contain substances that are dangerous or hazardous to your health. Therefore, follow the warning and safety instructions on the packaging. When cleaning inside the vehicle, always open the doors or windows of the vehicle. In enclosed areas, pro- vide for sufficient ventilation. Only use products designed for cleaning vehicles.<
Exterior care
Washing the vehicle
Especially during the winter months, ensure that the vehicle is washed more
frequently. Heavy soiling and road salt can lead to vehicle damage.<
After washing the vehicle, apply the brakes briefly to dry them; otherwise, water can reduce braking efficiency over the short term and the brake discs can corrode.<
Automatic car washes Preference should be given to cloth car washes. Before driving into a car wash, ensure that it is suitable for your BMW. Check the following:
> Dimensions of your vehicle, refer to
page 245.
> If necessary: fold in the exterior mirrors,
refer to page 47.
> Maximum permissible tire width.
Avoid car washes with guide rail heights over 4 in/10 cm; otherwise, there is the
danger of damaging chassis parts.< Preparations before driving into an automatic car wash: > Unscrew the rod antenna*. > Deactivate the rain sensor* to prevent unin-
tentional wiping.
> Sports Wagon: deactivate the rear window wiper and protect it against damage. If nec- essary, ask the operator of the car wash about protective measures you should take. > Remove additional add-on parts, e.g. spoil-
ers or phone antennas, if they could be damaged.
Automatic transmission Before driving into an automatic car wash, per- form the following steps to ensure that the vehi- cle can roll: 1.
Insert the remote control into the ignition lock, even with Comfort Access.
2. Move the selector lever to position N. 3. Release the parking brake. 4. Switch off the engine. 5. Leave the remote control in the ignition lock
so that the vehicle can roll.
Steam jets/high-pressure washers
When using steam jets or high-pressure washers, ensure that you maintain suffi-
cient clearance to the vehicle and do not exceed a temperature of 1407/606. Insufficient clearance or excessive pressure or temperature can lead to component damage or
225
e
water penetration. Follow the operating instruc- tions of the high-pressure washer.<
bird droppings to prevent damage to the paint- work.
When using high-pressure washers, do not spray against the sensors and cam- eras, e.g. of the Park Distance Control or Rear View Camera, for an extended period and main- tain a distance of at least 1 ft/30 cm.<
Manual car wash When washing the vehicle by hand, use large quantities of water and car shampoo if neces- sary. Clean the vehicle with a sponge or wash- ing brush, applying light pressure only.
Before cleaning the windshield, deacti- vate the rain sensor or switch off the igni-
tion to prevent unintentional activation of the wipers.<
Observe local regulations pertaining to washing vehicles by hand.<
Headlamps Do not rub them dry and do not use abrasive or corrosive cleaning agents. Loosen dirt, e.g. insects, with shampoo or insect remover and wash away with copious quantities of water. Thaw ice with a windshield deicer and do not use an ice scraper.
Windows Clean the inside and outside surfaces of the windows and the mirrors with window cleaner.
Do not clean the mirrors with cleaners containing quartz.<
Paintwork care Regular care contributes to value retention and protects the paintwork against the long-term effects of damaging substances. Region-specific environmental influences can damage the vehicle paintwork. Therefore, it is important to adapt the frequency and scope of car care accordingly. Immediately remove aggressive materials such as spilled fuel, oil, grease, brake fluid, tree sap or
226
Repairing paintwork damage
Immediately repair scratches or similar damage, such as that caused by stones hitting the vehicle, where necessary to prevent rusting.< BMW recommends having paintwork damage repaired by a professional paint repair work- shop according to BMW specifications using original BMW paint materials.
Preservation A preservation treatment is necessary when water no longer beads off the clean paintwork surface. Only use products for paintwork pres- ervation that contain carnauba or synthetic waxes.
Rubber seals Treat only with water or rubber care products. Do not use silicon-containing care prod- ucts on rubber seals; otherwise, noise
and damage could occur.<
Chrome parts Carefully clean vehicle parts such as the radia- tor grill, door handles or window frames with copious quantities of water and a shampoo additive, especially when roads are treated with deicing salt. For additional treatment, use a chrome polish.
Light-alloy wheels For technical reasons, dust is generated during braking that is deposited on the light-alloy wheels. Remove the dust regularly using acid- free rim cleaner.
Do not use aggressive, acidic, strongly alkaline and abrasive cleaning agents or steam jets over 1407/606; otherwise, dam- age may occur.<
Outside sensors/cameras
Keep the sensors and cameras on the outside of the vehicle, e.g. those for Park Distance Control, clean and free of ice to ensure that they remain fully functional.<
Interior care
Upholstery fabrics/cloth trims/ Alcantara fabrics Vacuum regularly with a vacuum cleaner to remove superficial dirt. To remove severe spots such as stains from beverages, use a soft sponge or lint-free microfiber cloth and suitable interior cleaners. Follow the instructions on the packaging.
Clean the upholstery down to the seams using a sweeping motion. Avoid strong
rubbing.<
Opened Velcro fasteners on pants or other articles of clothing can damage the
seat covers. Ensure that Velcro fasteners are closed.<
Leather/leather trim
The leather used by BMW is a high quality natural product. Slight irregularities in the
leather are a typical characteristic of natural leather.< Dust and road grit in the pores and folds of the leather have an abrasive effect, leading to increased wear and causing the leather surface to become brittle prematurely. Therefore, fre- quently clean the leather of dust using a cloth or vacuum cleaner. Clean light-colored leather more frequently as dust and dirt are more noticeable. Treat the leather at least once every two months using a leather lotion as dirt and grease will gradually attack the leather's protective layer.
Carpets/cargo area You can vacuum the carpets and floor mats or clean them with interior cleaner if heavily soiled.
The floor mats can be removed for cleaning. When replacing the mats, ensure that the seat rails do not extend over the floor mats, as this may damage the mats. Lint on the floor mats occurs for technical rea- sons and can be removed by vacuuming repeatedly.
Interior plastic parts > Imitation leather surfaces > Lamp glasses > Display pane of instrument cluster > Matte parts Clean with water and solvent-free plastic cleaner if necessary.
Fine wood parts Clean fine wood trim and fine wood parts with a damp cloth. Wipe dry with a soft cloth.
Safety belts Dirty belt straps impede the reeling action and thus have a negative impact on safety.
Do not clean chemically, as this may destroy the webbing.<
Interior sensors/cameras To clean interior sensors and cameras, e.g. of the high-beam assistant, use a lint-free cloth moistened with glass cleaner.
Displays To clean displays, e.g. of the radio or instrument cluster, use a cleaning cloth for displays or a soft, non-abrasive, lint-free cloth.
Avoid applying excessive pressure when cleaning the displays; otherwise, damage
may occur.<
Do not use chemical or abrasive house- hold cleaning agents. Keep all types of
fluid away from the device. Otherwise, surfaces or electrical components may be corroded or damaged.<
227
e
CD/DVD drives
Do not use a cleaning CD, as it may dam- age parts of the drive.<
Vehicle storage If your vehicle is to be decommissioned for longer than three months, your BMW center or a workshop that operates according to BMW specifications will be glad to advise you.
228
Replacing components
Onboard vehicle tool kit
Wiper blades
Sedan
The onboard vehicle tool kit is stored in a com- partment on the right-hand side of the cargo area. Remove the cover.
Sports Wagon
1. Fold out the wiper arm and hold it. 2. Press together the locking spring, arrows 1,
and fold out the wiper blade, arrow 2.
3. Take the wiper blade out of the catch mech-
anism, pulling the blade toward the front. To avoid damage, make sure that the wiper arms are against the windshield before you open the engine compartment.<
Sports Wagon: changing rear wiper blade
The onboard vehicle tool kit is stored in a com- partment on the left-hand side underneath the cargo area floor panel.
1. Fold up the wiper arm. 2. Pull off the wiper blade, see arrow. 3.
Insert the new wiper blade and press it on until it audibly engages.
Lamps and bulbs Lamps and bulbs make an essential contribu- tion to vehicle safety. They should, therefore, be handled carefully. BMW recommends hav- ing your BMW center perform any work that you
229
s
do not feel competent to perform yourself or that is not described here.
the journey with great care, provided that local legislation does not prohibit this.
Never touch the glass of new bulbs with your bare fingers, as even minute
amounts of contamination will burn into the bulb's surface and reduce its service life. Use a clean tissue, cloth or something similar, or hold the bulb by its base.< You can obtain a selection of replacement bulbs at your BMW center.
Only change bulbs while they are cool to the touch; otherwise, you could suffer
burns.<
When working on electrical systems, always begin by switching off the con- sumer in question; otherwise, short-circuits could result. To avoid possible injury or equip- ment damage when replacing bulbs, observe any instructions provided by the bulb manufac- turer.< For care of the headlamps, please follow the instructions in the chapter entitled 'Care'.
If the routine for changing a particular bulb is not described here, please contact
your BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel.<
Light-emitting diodes LED Light-emitting diodes installed behind translu- cent lenses serve as the light source for many of the controls and displays in your vehicle. These light-emitting diodes, which operate using a concept similar to that applied in conventional lasers, are officially designated as Class 1 light- emitting diodes.
Do not remove the covers or expose the eyes directly to the unfiltered light source
for several hours; otherwise, this could cause irritation of the retina.<
Xenon lamps* These bulbs have a very long service life and are highly unlikely to fail. If a xenon lamp fails never- theless, switch on the fog lamps and continue
230
Have any work on the xenon lamp system, including bulb replacements, performed only by a BMW center or a workshop that works according to BMW repair procedures with cor- respondingly trained personnel. Otherwise, if such work is carried out improperly, the high voltage in the system presents the danger of fatal injuries.<
Replacing parking lamps, roadside parking lamps, and daytime running lights H8 bulb, 35 watts 1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Turn the cover to the left, see arrow, and
remove it.
3. Turn the bulb approx. 90°, see arrow, and
take it out.
4. Disconnect the plug, change the bulb and
reconnect the plug. Insert the bulb and turn it until it stops.
5. 6. Reattach the cover.
Replacing the corner-illuminating lamp* H3 bulb, 55 watts 1. Switch off the lamps and take the remote
control out of the ignition lock.
2. Remove the upper cover from the head-
lamp. To do so, pull the rubber seal up and off and unscrew the cover using the screw- driver from the onboard vehicle tool kit, see arrow.
pressurized. Otherwise, there is a risk of injury if the bulb is damaged.< There are separate headlamp covers for low- beam headlamps and high-beam headlamps.
Be careful when installing the covers; oth- erwise, leaks could occur and cause dam-
age to the headlamp system.<
For checking and adjusting headlamp aim, please contact your BMW center.<
Access to the lamps The high-beam headlamp can be accessed from the engine compartment, whereas the low-beam headlamp is accessed through a flap in the wheel well.
3. Release the wire bracket from the anchor,
see arrow, and fold it up.
1 Cover for high-beam headlamp 2 Cover for low-beam headlamp 3 Turn signal bulb socket To remove the covers: 1. Fold the respective wire bracket to the side,
see arrows.
2. Flip open the cover and take it out of the
guide.
Follow the same steps in reverse order to reat- tach the covers.
4. Disconnect the plug, change the bulb and
reconnect the plug. Insert the bulb.
5. 6. Fold the wire bracket down and engage it. 7. Reattach the cover.
Be careful when installing the cover; oth- erwise, leaks could occur and cause dam-
Access through the wheel well Only for low-beam headlamps and turn signals:
age to the headlamp system.<
Halogen lamps H7 bulb, 55 watts
Always wear gloves and eye protection; the atmosphere within the H7 bulb is
231
s
1. Turn the wheel inwards. 2. Open the flap in the wheel well. To do so,
turn the fastener counterclockwise using a coin, for example.
1. Remove the cover for the high-beam head-
lamp.
2. Pull out the bulb socket, see arrow.
Changing low-beam and high-beam bulbs 1. Remove the relevant cover for the head-
lamp.
2. Disconnect the plug from the lamp. 3. Push the wire bracket to the side out of the
mounting, arrow 1, and fold it down, arrow 2.
3. Remove and replace the bulb. 4. Insert bulb socket. 5. Reattach the cover.
Turn signals, front PY24W bulb, 24 watts 1. Open the flap in the wheel well, refer to
Access through the wheel well on page 231.
4. Remove the bulb. 5.
Insert new bulb as shown in the detail of the illustration above.
6. Fold up the wire bracket and engage it. 7. Connect the plug. 8. Reattach the cover.
2. Rotate turn signal bulb socket 1 to the left
and remove.
3. Apply gentle pressure to the bulb while
turning it to the left for removal and replace- ment. Insert turn signal bulb socket 1. 4. 5. Attach the flap to the wheel well.
Parking lamps, roadside parking lamps W5W bulb, 5 watts
Tail lamps
Sedan > Brake lamp in the trunk lid:
H21W bulb, 21 watts
232
> Backup lamp:
W16W bulb, 16 watts
> Other lamps:
P21W bulb, 21 watts
The tail lamps are divided in two parts. One part is in the trunk lid, the other is in the fender.
1 Brake lamp 2 Roadside parking lamp/tail lamp, LED 3 Turn signal, LED 4 Backup lamp 5 Tail lamp, LED 6 Brake lamp If one of the bulbs 2, 3 or 5 malfunctions, please contact your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel.
Sports Wagon > Brake lamp in the tailgate:
H21W bulb, 21 watts
> Backup lamp:
W16W bulb, 16 watts
> Other lamps:
P21W bulb, 21 watts
The tail lamps are divided in two parts. One part is in the tailgate, the other is in the fender.
1 Brake lamp 2 Roadside parking lamp/tail lamp, LED 3 Turn signal, LED 4 Backup lamp 5 Tail lamp, LED 6 Brake lamp If one of the bulbs 2, 3 or 5 malfunctions, please contact your BMW center or a workshop that works according to BMW repair procedures with correspondingly trained personnel.
Fender-mounted lamps
Sedan 1. Using a screwdriver, pry off the cover in the cargo area or release the turn-lock fastener by turning it counterclockwise and remove the cover.
2. Loosen the bulb holder at the clip, see
arrow, and pull out.
3. Apply gentle pressure to the bulb while
turning it to the left for removal and replace- ment.
4. Re-engage the bulb holder so that it audibly
clicks into place.
5. Reattach the cover in the cargo area.
233
s
Sports Wagon
