2013 Acura TL Owners Manual

＊ Models equipped with the keyless

access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

78

you use, and the driver’s seat and the outside mirrors move to the position stored in that remote transmitter/ keyless access remote (see page

170

).

Onmodelswithkeylessaccesssystem The driver’s ID (1 or 2) is displayed when the power mode is set to ON.

You can select the displayed language and also customize some vehicle control settings to your liking with the multi-information display and the three buttons on the steering wheel (see page

79

).

Normal Display Messages

Remote transmitter/keyless access remote 1 is used.

Remote transmitter/keyless access remote 2 is used.

When you unlock and open the driver’s door, the display shows ‘‘DRIVER 1’’ or ‘‘DRIVER 2’’ depending on which remote transmitter/keyless access remote

2013 TL12/07/20 10:39:49 31TK4640_084

If you do not fasten your seat belt, you will also see a ‘‘FASTEN SEAT BELT’’ message on the multi- information display when you turn the ignition switch to the ON (II) position.

＊

Multi-Information Display

SEL/RESET BUTTON

These messages go off several seconds after the key is inserted into the ignition switch.

Onmodelswithkeylessaccesssystem These messages go off after several seconds.

＊ Models equipped with the keyless access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

INFO BUTTONS (

â–² â–¼

A/T model is shown.

＊

With the ignition switch in the ON (II) position, the multi-information display changes as shown on page each time you press the INFO 81
( / ) button or the SEL/RESET â–² â–¼ button.

CONTINUED

79

2013 TL12/07/20 10:39:55 31TK4640_085

Multi-Information Display

＊

When you turn the ignition switch to the ON (II) position, your last selection is displayed. ＊ Models equipped with the keyless access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

80

In the normal display mode, the upper segment displays trip computer information, such as fuel economy or average speed. The lower segment displays the odometer/trip meter (A/B), outside temperature, and engine oil life and maintenance item code(s).

Onmodelswithkeylessaccesssystem You will see some keyless access system messages until you select the ON mode by operating the engine start/stop button. These messages can be customized (see page ).

110

In the multi-information display, the system message is also displayed (see page customize your vehicle control settings (see page

) and you can

89

94

).

UPPER SEGMENT

U.S. model is shown.

LOWER SEGMENT

The multi-information display consists of an upper segment and a lower segment.

2013 TL12/08/03 20:54:54 31TK4640_086

U.S. model is shown.

Multi-Information Display

Trip Computer (See page 84)

Customized Settings (See page 94)

Tire Pressure for Each Tire (See page 87)

SH-AWD Torque Distribution Monitor ＊ (See page 87)

: Press the INFO button (

). â–² â–¼

＊

1 :

On models without navigation system only This display will be shown when the Bluetooth HandsFreeLink is activated.

＊

2 : SH-AWD models only

CONTINUED 81

＊

HFL (See page 88)

2013 TL12/07/20 10:40:07 31TK4640_087

Multi-Information Display

U.S. model is shown.

＊

With the ignition switch in the ON (II) position, the lower part of the multi-information display changes as shown in the illustration, each time you press the SEL/RESET button.

82

Odometer

U.S.

Canada

ODOMETER

The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S. federal law and Canadian provincial/ territorial regulations to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated.

: Press the SEL/RESET button.

＊ Models equipped with the keyless

access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

2013 TL12/08/03 20:55:00 31TK4640_088

Multi-Information Display

Trip Meter

U.S.

Canada

To reset a trip meter, display it, and then press and hold the SEL/ RESET button until the number resets to ‘‘0.0.’’

When you reset Trip A, average fuel economy A is reset at the same time. When you reset Trip B, average fuel economy B is reset.

TRIP METER A

TRIP METER B

This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it. There are two trip meters: Trip A and Trip B. Each trip meter works independently, so you can keep track of two different distances.

In the customizing mode, you can set Trip A and average fuel economy A to reset when you refuel your vehicle (see page

105

).

83

2013 TL12/08/03 20:55:10 31TK4640_089

Multi-Information Display

Trip Computer Along with the trip meter, the trip computer calculates these values:

Average Fuel Economy Instant Fuel Economy Range Elapsed Time Average Vehicle Speed

84

AVERAGE FUEL ECONOMY A

INSTANTFUELMPG(U.S. models)/INSTANTFUELL/100km (Canadianmodels) This shows your instant fuel economy.

INSTANT FUEL U.S. model is shown.

AverageFuelEconomyA/B This shows your vehicle’s average fuel economy in mpg (U.S. models) or liter/100 km (Canadian models) since you last reset Trip A or Trip B.

You can customize the Trip A and Average Fuel Economy A reset condition on the multi-information display (see page

105

).

2013 TL12/08/03 20:55:17 31TK4640_090

RANGE This shows the estimated distance you can travel on the fuel remaining in the fuel tank. This distance is estimated from the fuel economy you received over the last several miles (U.S.) or kilometers (Canada), so it will vary with changes in speed, traffic, etc.

ELAPSEDTIME This shows the accumulated traveling time since you last reset it. When you turn the ignition switch to the ON (II) position, ELAPSED TIME is reset.

＊

You can customize the ELAPSED TIME reset conditions on the multi- information display (see page ).

106

＊ Models equipped with the keyless access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

Multi-Information Display

AVG.SPEED This shows the average speed you are traveling in miles per hour (mph) for U.S. models or kilometers per hour (km/h) for Canadian models.

85

2013 TL12/08/03 20:55:25 31TK4640_091

Multi-Information Display

Outside Temperature

U.S.

Canada

The temperature sensor is in the front bumper. The temperature reading can be affected by heat reflection from the road surface, engine heat, and the exhaust from surrounding traffic. This can cause an incorrect temperature reading when your vehicle speed is under 19 mph (30 km/h). When you start your trip, the sensor is not fully acclimatized, therefore it may take several minutes until the proper temperature is displayed.

Engine Oil Life

ENGINE OIL LIFE

U.S. model is shown.

This shows the remaining engine oil life. It shows 100% after the engine oil is replaced and the display is reset. The engine oil life is calculated based on engine operating conditions. For more information, see page

531

OUTSIDE TEMPERATURE

This shows the outside Fahrenheit temperature in U.S. models, and Celsius temperature in Canadian models.

In certain weather conditions, temperature readings near freezing (32°F, 0°C) could mean that ice is forming on the road surface.

You can adjust the outside temperature display (see page

104

).

86

2013 TL12/08/03 20:55:32 31TK4640_092

Tire Pressure Monitor

U.S.

Canada

SH-AWD Torque DistributionMonitor SH-AWDmodelsonly

Multi-Information Display

Example:

Technology Package is shown.

Example:

Technology Package is shown.

You can see the pressure of each tire in this monitor. If one or more tires are low, inflate them to the correct pressure. For more information, see page

515

U.S. model is shown.

This monitor shows how much torque is being delivered to each wheel. For more information, see page

504

87

2013 TL12/08/03 20:55:38 31TK4640_093

Multi-Information Display

Bluetooth HandsFreeLink

U.S. model is shown.

Onmodelswithoutnavigationsystem You can receive or make phone calls from your cell phone through your HandsFreeLink vehicle’s (HFL) system without touching your cell phone.

Bluetooth

88

To use the system, your cell phone and the HFL system must be linked. Not all cell phones are compatible with this system. Refer to page for instructions on how to link 412
your cell phone to HFL and how to receive or make phone calls, or visit the acura.com/handsfreelink website. In Canada, visit or call (888) 528-7876.

www.handsfreelink.ca

Onmodelswithnavigationsystem You can see HFL information on the navigation screen (see page

427

).

2013 TL12/07/20 10:41:04 31TK4640_094

System Messages

SYSTEM MESSAGE INDICATOR

A/T model is shown.

If there is a problem with your vehicle, for example the engine oil level is low or a door is not fully closed, the multi-information display will show you the problem. It does this by interrupting the current display with one or more messages.

Multi-Information Display

The system message(s) triggers the appropriate indicator(s) on the instrument panel, including the system message indicator, to come on. The system message indicator does not go off until the problem(s) is corrected.

You will also hear a beep when the system message comes on for the first time.

Most of the messages are displayed for about 5 seconds, and then the normal display returns. If there are several system messages to be shown, the display switches these messages every 5 seconds.

To switch the message(s) before 5
seconds have elapsed, press the INFO ( / ) button on the steering wheel.

â–² â–¼

Even if you press the INFO ( / ) â–² â–¼ button, some messages stay on or come on again at regular intervals until the problem is corrected.

If the system message indicator remains lit on the instrument panel, you can see the corresponding message(s) again by pressing the INFO ( / ) button repeatedly.

â–² â–¼

On the next page is a list of all messages:

CONTINUED

89

2013 TL12/07/20 10:41:16 31TK4640_095

Multi-Information Display

See page

12

See page

20

See page

20

See page

33

See page

33

U.S.

Canada

U.S.

Canada

U.S.

Canada

See page

212

See page

553

See page

598

See page

596

See page

597

See page

595

See page

508

See page

510

See page

510

SH-AWD model only

U.S.

Canada

90

2013 TL12/08/03 20:55:52 31TK4640_096

U.S. model shown

U.S.

Canada

U.S. model shown

See page

577

See page

515

See page

516

See page

516

See page

517

Multi-Information Display

See page

517

See page

77

See page

142

Onmodelswithout keylessaccess system See page488
Onmodelswith keylessaccess system See page490
A/Tmodel See page

494

SH-AWD model only

SH-AWD model only

See page

70

See pages 75 and 526

See pages 75 and 526

See page

73

See page

505

See page

505

CONTINUED

91

2013 TL12/08/03 20:56:01 31TK4640_097

Multi-Information Display

See page

532

See page

533

See page

534

See page

471

See page

548

Canadian models only

92

Onmodelswith keylessaccesssystem

See page

151

On models without keyless access system

See page

196

See page

196

See page

193

See page

194

See page

198

2013 TL12/07/20 10:41:51 31TK4640_098

See page

200

See page

199

See page

188

See page

190

See page

191

See page

188

A/T model only

A/T model only

A/T model only

M/T model only

See page

189

See page

188

See page

191

Multi-Information Display

93

2013 TL12/07/20 10:41:58 31TK4640_099

Multi-Information Display

Customized Settings You can customize some vehicle control settings. To change the settings, the ignition switch must be in the ON (II) position, and the vehicle must be stopped with the transmission in Park (automatic) or with the parking brake set (manual).

＊

＊

If you turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position, move the shift lever out of Park (automatic) or release the parking brake (manual), the display will change to the normal screen.

If you try to enter the customizing mode while the vehicle is moving, you will see a ‘‘MUST STOP AND SHIFT TO PARK TO CHANGE SETTINGS’’ (automatic) or ‘‘MUST STOP AND SET PARK BRAKE TO CHANGE SETTINGS’’ (manual) message and you cannot change the settings.

You can customize some vehicle control settings for ‘‘DRIVER 1’’ and ‘‘DRIVER 2’’ separately. To have the driver’s ID detected, make sure the driver’s door is unlocked with a corresponding remote transmitter/keyless access remote.

＊ Models equipped with the

keyless access system have an engine start/stop button instead of an ignition switch. VEHICLE OFF (LOCK) Mode is the equivalent of LOCK (0) and ACCESSORY Mode is the equivalent of ACCESSORY (I). For more information, see pages 184

and

187

94

2013 TL12/07/20 10:42:03 31TK4640_100

Onmodelswithout keylessaccesssystem If you use the key to unlock the driver’s door, the system cannot recognize either ‘‘DRIVER 1’’ or ‘‘DRIVER 2.’’

Multi-Information Display

DRIVER’S ID

Press the SEL/RESET button.

U.S. model is shown.

To enter the customizing mode, press either INFO button ( / ) ▲ ▼ repeatedly until ‘‘CUSTOMIZE SETTINGS’’ is displayed, then press the SEL/RESET button.

Refer to the table on the following pages about the settings you want to customize.

CONTINUED

95

2013 TL12/07/20 10:42:13 31TK4640_101

Multi-Information Display

Menu Item

Description

Setting Option

Page

Group Setup METER SETUP (P.101)

LANGUAGE SELECTION

Changes the language used in the display.

ADJUST OUTSIDE TEMP. DISPLAY

Changes the outside temperature reading above or below its current reading.

TRIP A RESET WITH REFUEL ELAPSED TIME RESET

ADJUST ALARM VOLUME

AUTO INTERIOR ILLUMINATION

Causes trip meter A and the average fuel economy to reset when you refuel. Resets the elapsed time of your current trip.

Changes the indicator alarm volumes into three levels.

Changes the interior light sensitivity to your liking.

POSITION SETUP (P.112)

KEYLESS START GUIDANCE SCREENS MEMORY POSITION LINK

＊

Changes the display of the keyless start guidance screens. Changes the driver’s seat and the outside mirror positions to a stored setting.

＊ ＊

1 : 2 :

Default setting Only on models with keyless access system

96

＊

＊

＊

ENGLISH FRENCH SPANISH 5°F − 〜 ± (U.S.) 3°C − 〜 ± (Canada) ON OFF IGN OFF TRIP A TRIP B HIGH MID ＊ LOW MAX HIGH MID ＊ ON ＊ OFF ON OFF

＊

0°F

＊

〜

5°F

0°C

＊

〜

3°C

LOW MIN OFF

103

104

105

106

108

109

110

113

2013 TL12/07/20 10:42:19 31TK4640_102

Multi-Information Display

Group Setup

KEYLESS ACCESS SETUP (P.115)

＊

LIGHTING SETUP (P.120)

Menu Item

DOOR UNLOCK MODE

KEYLESS ACCESS LIGHT FLASH

KEYLESS ACCESS BEEP

INTERIOR LIGHT DIMMING TIME HEADLIGHT AUTO OFF TIMER

AUTO LIGHT SENSITIVITY

＊ ＊

1 : 2 :

Default setting Only on models with keyless access system

Description

Setting Option

Changes which doors unlock when you use the remote or grab the driver’s door handle. Causes some exterior lights to blink when you unlock/lock the doors by grabbing or touching the sensor/pushing the button on the driver’s door handle. Causes the beeper to sound when you unlock/lock the doors by grabbing or touching the sensor/ pushing the button on the driver’s door handle. Changes how long (in seconds) the interior lights stay on after you close the doors. Changes how long (in seconds) the exterior lights stay on after you close the driver’s door.

Changes the timing of when the headlights come on. The headlight switch needs to be in the AUTO position.

＊

DRIVER DOOR ALL DOORS ON OFF

＊

＊

ON OFF

60 sec

0 sec

LOW MIN

＊

＊

15 sec 30 sec 60 sec 30 sec 15 sec MAX HIGH MID

＊

Page 116

117

118

121

122

123

CONTINUED 97

2013 TL12/07/20 10:42:25 31TK4640_103

Multi-Information Display

Group Setup

DOOR SETUP (P.125)

Menu Item AUTO DOOR LOCK

Description

Setting Option

Changes when the doors automatically lock.

AUTO DOOR UNLOCK

Changes when the doors automatically unlock.

KEY AND REMOTE UNLOCK MODE

KEYLESS LOCK ACKNOWLEDGMENT

SECURITY RELOCK TIMER

DEFAULT ALL (P.134)

＊ ＊ ＊

1 : 2 : 3 :

Default setting Default setting for automatic transmission Default setting for manual transmission

98

Changes which doors unlock with the remote transmitter/keyless access remote on the first push. The exterior lights flash each time you press the LOCK or UNLOCK button. A beeper will also sound when you press the LOCK button twice. Changes how long it takes (in seconds) for the doors to relock and the security system to set after you unlock but do not open the door. Set/Cancel all the customized settings as default.

＊

OFF WITH VEH SPD SHIFT FROM P (A/T only) OFF DRIVER DOOR With SHIFT to P (A/T only) ALL DOORS With SHIFT to P (A/T only) DRIVER DOOR With IGN OFF ALL DOORS With IGN OFF DRIVER DOOR ALL DOORS

＊

＊

＊

ON OFF

＊

30 sec 60 sec 90 sec CANCEL SET

Page

127

128

130

131

133

134

2013 TL12/07/20 10:42:34 31TK4640_104

Customize Settings You can customize some of the vehicle control settings to your preference. Here are the settings you can customize:

METER SETUP POSITION SETUP KEYLESS ACCESS SETUP LIGHTING SETUP DOOR SETUP

＊

＊

: Only on models with keyless access system

When you want to change the vehicle control settings, press the INFO ( / ) button to select CHANGE SETTINGS, then press the SEL/RESET button.

â–² â–¼

Multi-Information Display

Each time you press the INFO ( / â–² ) button, the screen changes as â–¼ shown on the next page. Press the INFO ( / ) button until you see the setup you want to customize, then press the SEL/RESET button to enter your selection.

â–² â–¼

If you do not make any changes, select ‘‘EXIT.’’ The display returns to the normal display.

If you want the settings as they were when the vehicle left the factory, select DEFAULT ALL, as described on page

134

CONTINUED

99

2013 TL12/07/20 10:42:39 31TK4640_105

Multi-Information Display

: Press the SEL/RESET button.

: Press the INFO button (

). â–² â–¼

＊

: On models with keyless access

system only

DEFAULT ALL See page 134.

METER SETUP See page 101.

POSITION SETUP See page 112.

KEYLESS ACCESS SETUP ＊ See page 115.

LIGHTING SETUP See page 120.

DOOR SETUP See page 125.

100

2013 TL12/07/20 10:42:47 31TK4640_106

Meter Setup Here are the selectable custom settings for the meter setup:

LANGUAGE SELECTION ADJUST OUTSIDE TEMP. DISPLAY TRIP A RESET WITH REFUEL ELAPSED TIME RESET ADJUST ALARM VOLUME AUTO INTERIOR ILLUMINATION

Onmodelswithkeylessaccess system KEYLESS START GUIDANCE SCREENS

While ‘‘METER SETUP’’ is shown, press the SEL/RESET button to enter the customize mode.

Multi-Information Display

Each time you press the INFO ( / â–² ) button, the screen changes as â–¼ shown in the illustration. Press the INFO ( / ) button until you see the setting you want to customize, then press the SEL/RESET button to enter your selection.

â–² â–¼

CONTINUED

101

2013 TL12/07/20 10:42:51 31TK4640_107

Multi-Information Display

: Press the SEL/RESET button.

: Press the INFO button (

â–² â–¼ ).

See page 103.

See page 104. See page 105. See page 106. See page 108.

See page 109.

Onmodelswith keylessaccess systemonly See page 110.

102

2013 TL12/07/20 10:42:59 31TK4640_108

LanguageSelection

Multi-Information Display

There are three language selections you can make: English, French, and Spanish. To choose the language you want, follow these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

â–² â–¼

Press the SEL/RESET button to see the selections.

Select the desired language by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

â–² â–¼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customizable item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘LANGUAGE SELECTION’’ and repeat the procedure again.

CONTINUED

103

2013 TL12/07/20 10:43:08 31TK4640_109

Multi-Information Display

AdjustOutsideTemp.Display

If you sometimes find that the temperature reading is a few degrees above or below the actual temperature, you can adjust it by following these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to enter the setting.

â–² â–¼

104

U.S. models

Canadian models

U.S. models

Canadian models

The displayed number is the current adjustment above or below the outside temperature.

Adjust the outside temperature value by pressing the INFO ( / ) button repeatedly. Press the SEL/RESET button to set the desired value.

â–² â–¼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customizable item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ADJUST OUTSIDE TEMP. DISPLAY’’ and repeat the procedure again.

2013 TL12/07/20 10:43:16 31TK4640_110

TripAResetWithRefuel

Multi-Information Display

To cause Trip A and average fuel for trip A to reset every time you refuel your vehicle, follow these instructions:

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) button repeatedly.

â–² â–¼

Press the SEL/RESET button to see the selections.

Select ON or OFF by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/ RESET button.

â–² â–¼

When your selection is successfully completed, the display changes as shown above, and then goes back to the customizable item screen.

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘TRIP A RESET WITH REFUEL’’ and repeat the procedure again.

CONTINUED

105

2013 TL12/07/20 10:43:24 31TK4640_111

Multi-Information Display

ElapsedTimeReset There are three elapsed time reset choices you can make:

−

IGN OFF The elapsed time is reset when you turn the ignition switch to the LOCK (0) position.

＊

TRIP A when Trip A is reset.

−

The elapsed time is reset

TRIP B when Trip B is reset.

−

The elapsed time is reset

s ＊ Models equipped with the keyless

access system have an engine start/ stop button instead of an ignition switch. ON Mode is the equivalent of ON (II). For more information, see pages

and

184

187

106

You can choose this item to customize from ‘‘METER SETUP’’ by pressing the INFO ( / ) ▲ ▼ button repeatedly.

Press the SEL/RESET button to see the selections.

Select the desired setting by pressing the INFO ( / ) button, then enter your selection by pressing the SEL/RESET button.

â–² â–¼

2013 TL12/07/20 10:43:28 31TK4640_112

Multi-Information Display

If the ‘‘SETTING INCOMPLETE’’ message appears, go back to ‘‘ELAPSED TIME RESET’’ and repeat the procedure again.

When your selection is successfully completed, the display changes as shown above, and then goes back to the customizable item screen.

107

2013 TL12/07/20 10:43:35 31TK4640_113

Multi-Information Display

AdjustAlarmVolume