2013 Acura TL Owners Manual

Download PDF Manual
CONTINUED 349 2013 TL12/07/20 11:14:53 31TK4640_355 Playing Hard Disc Drive (HDD) Audio (Models with navigation system) 4. 5. Turn the interface dial and select Update Gracenote Info, then press ENTER on the interface selector. Turn the dial to select USB or DISC on the Update Gracenote Album info screen, then press ENTER on the selector. 6. Turn the dial to select Yes on the confirmation screen, and the update will start. 7. Turn the interface dial to select OK on the confirmation screen. 8. After updating is complete, press ENTER on the confirmation screen. NOTE: Once you perform an update, any information you edited before will be overwritten. ClearingtheHDD Any music, data, calendar entries, etc. that have been stored on the HDD can be deleted. 1. 2. 3. Press the INFO button, rotate the interface dial to select ‘‘Set up,’’ and press ENTER. Move the interface selector to the right to navigate to the ‘‘Set up (Other)’’ screen. On the ‘‘Set up (Other)’’ screen, rotate the interface dial to select ‘‘Clear Personal Data,’’ and press ENTER. 4. Select the item you wish to delete, then press ENTER. 5. A trash icon appears next to the selected item. Select ‘‘OK’’ to continue by pressing the interface selector down. 2. Push the interface selector down to select AUDIO MENU in the HDD playback screen or CD playback screen. 3. Turn the interface dial to select HDD Setup, then press ENTER on the interface selector. 350 2013 TL12/08/08 20:02:44 31TK4640_356 Playing Hard Disc Drive (HDD) Audio (Models with navigation system) Gracenote is an internet-based music recognition service that allows artist, album, and track information from CDs to display on the HDD. More information about Gracenote, its features, and downloads are available at www.acura.com (in Canada). or www.acura.ca (in U.S.) 6. 7. 8. A confirmation screen verifying whether the deletion is to be continued or not will be displayed. Select Yes to delete, or No to cancel. A second confirmation will appear. Select Yes to delete, or No to cancel. When you are finished deleting the data, press ENTER to show the navigation screen. If you select ‘‘Music on HDD,’’ NOTE: the system will automatically restart after deletion. Gracenote Music Recognition Service (CDDB) Music recognition technology and related data are provided by Gracenote . Gracenote is the industry standard in music recognition technology and related content delivery. For more information visit www.gracenote.com. When music is recorded to the HDD from a CD, information such as the recording artist and track name are retrieved from the Gracenote Database and displayed (when available). Gracenote may not contain information for all albums. CONTINUED 351 2013 TL12/08/08 20:02:50 31TK4640_357 Playing Hard Disc Drive (HDD) Audio (Models with navigation system) CD and music-related data from Gracenote, Inc., copyright 2000 to present Gracenote. Gracenote Software, copyright 2000 to present Gracenote. One or more patents owned by Gracenote apply to this product and service. See the Gracenote website for a non- exhaustive list of applicable Gracenote patents. Gracenote, CDDB, MusicID, MediaVOCS, the Gracenote logo and logotype, and the ‘‘Powered by Gracenote’’ logo are either registered trademarks or trademarks of Gracenote in the United States and/or other countries. Gracenote End User License Agreement This application or device contains software from Gracenote, Inc. of Emeryville, California (‘‘Gracenote’’). The software from Gracenote (the ‘‘Gracenote Software’’) enables this application to perform disc and/or file identification and obtain music- related information, including name, artist, track, and title information (‘‘Gracenote Data’’) from online servers or embedded databases (collectively, ‘‘Gracenote Servers’’) and to perform other functions. You may use Gracenote Data only by means of the intended End-User functions of this application or device. You agree that you will use Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal non-commercial use only. You agree not to assign, copy, transfer, or transmit the Gracenote Software or any Gracenote Data to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN. You agree that your non-exclusive license to use the Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your license terminates, you agree to cease any and all use of the Gracenote Data, the Gracenote Software, and Gracenote Servers. 352 2013 TL12/07/20 11:15:12 31TK4640_358 Playing Hard Disc Drive (HDD) Audio (Models with navigation system) Gracenote reserves all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers, including all ownership rights. Under no circumstances will Gracenote become liable for any payment to you for any information that you provide. You agree that Gracenote, Inc. may enforce its rights under this Agreement against you directly in its own name. The Gracenote service uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow the Gracenote service to count queries without knowing anything about who you are. For more information, see the web page for the Gracenote Privacy Policy for the Gracenote service. The Gracenote Software and each item of Gracenote Data are licensed to you ‘‘AS IS.’’ Gracenote makes no representations or warranties, express or implied, regarding the accuracy of any Gracenote Data from in the Gracenote Servers. Gracenote reserves the right to delete data from the Gracenote Servers or to change data categories for any cause that Gracenote deems sufficient. No warranty is made that the Gracenote Software or Gracenote Servers are error-free or that functioning of Gracenote Software or Gracenote Servers will be uninterrupted. Gracenote is not obligated to provide you with new enhanced or additional data types or categories that Gracenote may provide in the future and is free to discontinue its services at any time. GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON- INFRINGEMENT. GRACENOTE DOES NOT WARRANT THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES. Gracenote 2011 353 2013 TL12/07/20 11:15:17 31TK4640_359 Playing an iPod (Models with navigation system) 354 AUDIO BUTTON CANCEL BUTTON INTERFACE DIAL ALBUM ART NAVIGATION SCREEN VOL/ (VOLUME/POWER) KNOB CENTER DISPLAY HDD/AUX BUTTON SKIP BAR 2013 TL12/07/20 11:15:25 31TK4640_360 To Play an iPod This audio system can select and play the audio files on the iPod with the same controls used for the in- dash disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the HDD/AUX button. The power mode must be ACCESSORY or ON. The iPod will also be charged with the power mode in these settings. Your vehicle has the engine start/ stop button instead of an ignition switch. For more information on how to select the power mode, see page 184 Playing an iPod (Models with navigation system) The audio system reads and plays playable sound files on the iPod. The system cannot operate an iPod as a mass storage device. The system will only play songs stored on the iPod with iTunes. iPod and iTunes are registered trademarks owned by Apple Inc. VoiceControlSystem You can select the AUX mode by using the voice control buttons. The audio system, including the music search feature Song By Voice , can be operated by voice control. See the navigation system manual for complete details. TM iPod models confirmed to be compatible with your audio system using the USB adapter cable are: Model iPod (5th generation) iPod classic 80 GB/160 GB iPod classic 120 GB iPod classic 160 GB (launch in 2009) iPod nano (1st to 6th generation) iPod touch (1st to 4th generation) This system may not work with all software versions of these devices. CONTINUED 355 2013 TL12/07/20 11:15:34 31TK4640_361 Playing an iPod (Models with navigation system) NOTE: Do not connect your iPod using a hub. ConnectinganiPod USB CONNECTOR DOCK CONNECTOR Do not keep the iPod and dock connector cable in the vehicle. Direct sunlight and high heat will damage it. Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector. We recommend backing up your data before playing it. Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device. 356 USB ADAPTER CABLE 1. Unclip the USB connector by pulling it up, and pull out the USB adapter cable in the console compartment. USB ADAPTER CABLE 2. Connect your dock connector to the iPod correctly and securely. 3. Install the dock connector to the USB adapter cable securely. 2013 TL12/07/20 11:15:43 31TK4640_362 Playing an iPod (Models with navigation system) If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times. ToChangeorSelectFiles Use the SKIP bar while an iPod is playing to select passages and change files. − side of the SKIP bar, Each time you press and SKIP release the the system skips forward to the beginning of the next track. Press and release the side of the bar to skip backward to the beginning of the current track. Press it again to skip to the beginning of the track previous To move rapidly within playing track, press and hold either side ( or ) of the SKIP bar. If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at www.apple.com/ The current file number and total of the selected playable files are displayed in the center display. Pressing the AUDIO button displays the artist, album and track (file) names on the navigation screen. If a music file on your iPod has album art, it will be shown in the display. You can set this album art display function on and off (see page 361 ). You can also select a track from any category on the list: Playlists, Artists, Albums, Songs, Genres, Composers and Podcasts by using the interface dial. Push the interface selector up to display the Music Search screen. Turn the interface dial to select a desired search method. CONTINUED 357 2013 TL12/07/20 11:15:51 31TK4640_363 Playing an iPod (Models with navigation system) If you select ‘‘ALL’’ on the artists list, the albums list is displayed. Push the interface selector down to select ‘‘PLAY SELECTED’’ on any list. All available files on the selected list are played. The track order that appears at this time varies depending on the iPod model and software. Press the AUDIO button to go back to the normal audio playing display. Pressing the CANCEL button goes back to the previous screen, and pressing the MAP button cancels the audio control display on the screen. If you select ‘‘ALL’’ on the albums list, all the tracks become available for selection. Press ENTER on the interface selector to display the items on that list, then turn the interface dial to make a selection. Press ENTER to set your selection. If you push the interface selector right or left, you can change the alphabet tag. 358 2013 TL12/07/20 11:16:00 31TK4640_364 Playing an iPod (Models with navigation system) REPEAT 3. Turn the interface dial, select the Repeat icon and press ENTER. Playback of the track that is currently being played will be repeated. To cancel this function, turn the interface dial and select the Repeat OFF icon, and then press ENTER. REPEAT This feature continuously plays a file. − 1. Press the AUDIO button to display the audio control screen, then push the interface selector down to display the AUDIO MENU. 2. Turn the interface dial, select Repeat, and press ENTER. SHUFFLE ICON − SHUFFLE This feature shuffles playback of tracks contained within the iPod. This function can be established at the same time that Repeat Playback is set up. 1. On the iPod screen, push the interface selector down to display the AUDIO MENU. CONTINUED 359 2013 TL12/07/20 11:16:09 31TK4640_365 Playing an iPod (Models with navigation system) 2. 3. Turn the interface dial, select Shuffle and press ENTER on the interface selector. Turn the interface dial, select the Shuffle icon and press ENTER on the interface selector. Shuffle playback will begin. To cancel this function, turn the interface dial and select the Shuffle OFF icon, and then press ENTER on the interface selector. 360 2. 3. Turn the interface dial, select Shuffle and press ENTER on the interface selector. Turn the interface dial, select the Album Shuffle icon and press ENTER on the interface selector. Shuffle playback of the album will begin. To cancel this function, turn the interface dial and select the Shuffle OFF icon, and then press ENTER on the interface selector. NOTE: Available operating functions vary on models or versions. Some functions may not be available on the vehicle’s audio system. ALBUM SHUFFLE ICON − ALBUM SHUFFLE Shuffles playback of all available albums, which are selected by the desired list: playlists, artists, albums, songs, genres, composers or podcasts. This function can be selected at the same time that Repeat Playback is setup. 1. On the iPod screen, push the interface selector down to display the AUDIO MENU. 2013 TL12/07/20 11:16:20 31TK4640_366 Selecting Album Art ALBUM ART To change this feature on or off: 1. Push the interface selector down to select AUDIO MENU. 2. Turn the dial to select Album Art, then press ENTER. 3. Turn the interface dial to select ON or OFF, then press ENTER. Playing an iPod (Models with navigation system) Searching Music by Voice You can search a song by the Song By Voice feature. See the navigation system manual for complete details. To change this feature on or off: 1. Push the interface selector down to select AUDIO MENU. 2. Turn the dial to select Music Search Setup and press ENTER. 3. Turn the interface dial to select Song By Voice, then press ENTER. 4. Turn the interface dial to select ON or OFF, then press ENTER. Push down the interface selector to go back to the audio screen. CONTINUED 361 2013 TL12/07/20 11:16:31 31TK4640_367 Playing an iPod (Models with navigation system) ModifyingthePhonetics To modify the phonetics: 1. Select the Music Search Setup screen as described previously. 2. 3. Turn the interface dial to select Phonetic Modification, then press ENTER. Follow the steps 2 to 11 on pages 335 through 337 To Stop Playing Your iPod To play the radio, press the AM/FM, or button. Press the DISC button to switch to the disc mode. Press the HDD/AUX button to switch the audio mode between HDD Audio, USB and Bluetooth Audio. You can also press the MODE button on the steering wheel to change modes. ＊ DisconnectinganiPod You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see the ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable. ＊ The displayed message may vary on models or versions. On some models, there is no message to disconnect. 362 When you disconnect the iPod while it is playing, the center display and the audio screen (if selected) show USB NO DATA. If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected. When you connect your iPod to the navigation system, the most recent settings (Shuf f le, Repeat, etc.) will be carried over. iPod Error Messages If you see an error message in the center display, see page 363 2013 TL12/07/20 11:16:35 31TK4640_368 iPod Error Messages (Models with navigation system) If you see an error message in the center display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Solution UNSUPPORTED Ver. CONNECT RETRY NO SONG Appears when an unsupported iPod is inserted. Appears when the iPod cannot be authenticated. Appears when there are no files in the iPod. 363 2013 TL12/07/20 11:16:40 31TK4640_369 Playing a USB Flash Memory Device (Models with navigation system) CATEGORY BAR AUDIO BUTTON 364 INTERFACE DIAL NAVIGATION SCREEN VOL/ (VOLUME/POWER) KNOB CENTER DISPLAY HDD/ AUX BUTTON SKIP BAR SCAN/A.SEL (SCAN/AUTO SELECT) BAR 2013 TL12/07/20 11:16:50 31TK4640_370 Playing a USB Flash Memory Device (Models with navigation system) To Play a USB Flash Memory Device This audio system can select and play the audio files on a USB flash memory device with the same controls used for the disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the HDD/AUX button until you see ‘‘USB’’ in the display. The power mode must be ACCESSORY or ON. Your vehicle has the engine start/ stop button instead of an ignition switch. For more information on how to select the power mode, see page 184 ＊ The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC formats. The recommended USB flash memory devices are 256 MB or higher, and formatted with the FAT file system. Some digital audio players may be compatible as well. Some USB flash memory devices (such as devices with security lock- out features, etc.) will not work in this audio unit. ＊ Only AAC format files recorded with iTunes are playable on this audio unit. NOTE: Do not use a device such as a card reader or hard drive as it or your files may be damaged. Do not connect your USB flash memory device using a hub. Do not use an extension cable to the USB adapter cable equipped with your vehicle. Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it. We recommend backing up your data before playing a USB flash memory device. Depending on the type and number of files, it may take some time before they begin to play. CONTINUED 365 2013 TL12/07/20 11:16:56 31TK4640_371 Playing a USB Flash Memory Device (Models with navigation system) VoiceControlSystem You can select the AUX mode by using the voice control buttons, but cannot operate the play mode functions. Some versions of MP3, WMA, or AAC format may not be supported. If an unsupported file is found, the audio unit displays UNSUPPORTED, then skips to the next file. In WMA or AAC format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, the audio unit displays UNPLAYABLE FILE, and then skips to the next file. Combining a low sampling f requency with a low bitrate may result in extremely degraded sound quality. Depending on the software the files were made with, it may not be possible to play some files, or display some text data. Depending on the type of encoding and writing software used, there may be cases where character information does not display properly. Some devices cannot be powered or charged via the USB adapter. If this is the case, use the accessory adapter to supply power to your device. The order of files in USB playback may be different from the order of files displayed in PC or other devices etc. Files are played in the order stored in USB flash memory device. 366 2013 TL12/07/20 11:17:02 31TK4640_372 Playing a USB Flash Memory Device (Models with navigation system) ConnectingaUSBFlash MemoryDevice USB CONNECTOR USB ADAPTER CABLE 2. Connect the USB flash memory device to the USB adapter cable correctly and securely. USB ADAPTER CABLE 1. Unclip the USB connector by pulling it up, and pull out the USB adapter cable in the console compartment. When the USB device is connected and the USB mode is selected on the audio system, the USB indicator is shown in the center display. It also shows the folder and file numbers. Pressing the AUDIO button displays the USB indicator, the folder and file names, and the elapsed time in the navigation screen. CONTINUED 367 2013 TL12/07/20 11:17:09 31TK4640_373 Playing a USB Flash Memory Device (Models with navigation system) − To select a Folder Selection different folder, press and release either side of the CATEGORY bar. side to skip to the next Press the folder, and press the side to skip to the beginning of the previous folder. ＋ − ToSelectaFilefrom FolderandFileLists You can also select a folder or file from the list by using the interface dial. Press the AUDIO button to show the audio display on the navigation screen. Use the interface dial to highlight the file, then press ENTER to set your selection. ToChangeorSelectFiles Use the SKIP bar while a USB flash memory device is playing to select passages and change files. − side of the SKIP bar, Each time you press and SKIP release the the system skips forward to the beginning of the next file. Press and release the side of the bar, to skip backward to the beginning of the current file. Press it twice to skip to the beginning of the previous file. To move rapidly within a file, press and hold either side ( of the SKIP bar. or 368 2013 TL12/07/20 11:17:15 31TK4640_374 Playing a USB Flash Memory Device (Models with navigation system) Push the selector up to display the ‘‘Select a folder’’ screen. Then turn the interface dial to select a folder, and press ENTER. If you have more than one layer of folders (folders within folders), you can also see each folder on the screen. To go back to the normal playing display, press the AUDIO button. Pressing the CANCEL button goes back to the previous screen and pressing the MAP button cancels the audio mode display. ToSelectRepeat, RandomorScanMode: Push the interface selector down to display the AUDIO MENU. You can select any type of repeat, random or scan mode on the audio menu screen. Move the interface selector up to select BACK to show the USB screen, or press the CANCEL button to return to the previous screen. CONTINUED 369 2013 TL12/07/20 11:17:26 31TK4640_375 Playing a USB Flash Memory Device (Models with navigation system) TRACK REPEAT REPEAT OFF ICON TRACK REPEAT ICON This function repeats playback of the track. 1. On the USB main screen, push the interface selector down to display the AUDIO MENU. 2. Turn the interface dial to select Repeat and press ENTER. 370 3. Turn the interface knob, select the Track Repeat icon and press ENTER on the interface selector. Playback of the track that is currently being played will be repeated. To cancel this function, turn the interface dial and select the Repeat OFF icon, and then press ENTER. Pressing either side of the SKIP bar also cancels this function. FOLDER REPEAT FOLDER REPEAT ICON This function replays all the tracks in a folder in the order that they were stored. 1. On the USB main screen, push the interface selector down to display the AUDIO MENU. 2. Turn the interface dial to select Repeat and press ENTER. 2013 TL12/07/20 11:17:35 31TK4640_376 Playing a USB Flash Memory Device (Models with navigation system) TRACK RANDOM RANDOM OFF ICON 3. Turn the interface dial, select the Folder Repeat icon and press ENTER on the interface selector. Playback of the folder that is currently being played will be repeated. To cancel this function, turn the interface dial and select the Repeat OFF icon, and then press ENTER on the interface selector. 3. Turn the interface dial, select the Track Random icon and press ENTER on the interface selector. The tracks are played in random order. To cancel this function, turn the interface dial and select the Random OFF icon, and then press ENTER on the interface selector. TRACK RANDOM ICON This function plays all the tracks on the USB flash memory device in random order. 1. 2. On the USB main screen, push the interface selector down to display the AUDIO MENU. Turn the interface dial, select Random and press ENTER on the interface selector. CONTINUED 371 2013 TL12/07/20 11:17:46 31TK4640_377 Playing a USB Flash Memory Device (Models with navigation system) FOLDER RANDOM 3. Turn the interface dial, select the Folder Random icon and press ENTER on the interface selector. The files are played in random order. To cancel this function, turn the interface dial and select the Random OFF icon, and then press ENTER on the interface selector. TRACK SCAN SCAN OFF ICON FOLDER RANDOM ICON This function plays all of the tracks in the current folder in random order. 1. 2. On the USB main screen, push the interface selector down to display the AUDIO MENU. Turn the interface dial, select Random and press ENTER on the interface selector. 372 TRACK SCAN ICON This function samples all the tracks in the current folder in the order that they were recorded. 1. 2. On the USB main screen, push the interface selector down to display the AUDIO MENU. Turn the interface dial, select the Scan icon and press ENTER on the interface selector. 2013 TL12/07/20 11:17:56 31TK4640_378 Playing a USB Flash Memory Device (Models with navigation system) 3. Turn the interface dial, select Track Scan icon and press ENTER on the interface selector. Each track or file is sampled for 10 seconds. When all the tracks in the folder have been scanned, regular playback is resumed. To cancel this function, turn the interface dial and select the Scan OFF icon, and then press ENTER on the interface selector to play the last track sampled. FOLDER SCAN FOLDER SCAN ICON This function samples the first file in each folder within the USB flash memory device. 1. 2. On the USB main screen, push the interface selector down to display the AUDIO MENU. Turn the interface dial, select the Scan icon and press ENTER on the interface selector. 3. Turn the interface dial, select Folder Scan icon and press ENTER on the interface selector. The first file of the first folder is sampled for 10 seconds. If no other operations are carried out, the first files of the remaining folders are played for 10 seconds. After the first file of the last folder is played back, regular playback is resumed. To cancel this function, turn the interface dial and select the Scan OFF icon, and then press ENTER on the interface selector. You can also select the scan feature with the SCAN side of the SCAN/ A.SEL bar on the control panel. Press and release the SCAN side of the bar. Press and hold the SCAN side of the bar to get out of the scan mode and play the last file sampled. 373 2013 TL12/07/20 11:18:04 31TK4640_379 Playing a USB Flash Memory Device (Models with navigation system) USB Flash Memory Device Error Messages If you see an error message in the center display, see page 375 To Stop Playing a USB Flash Memory Device To play the radio, press the AM/FM, or button. Press the DISC button to switch to the disc mode. Press the HDD/AUX button to switch the audio mode between HDD Audio, USB and Bluetooth Audio. You can also press the MODE button on the steering wheel to change modes. If you reconnect the same USB flash memory device, the system will begin playing where it left off. DisconnectingaUSBFlash MemoryDevice You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device’s instructions when you remove it. When you disconnect the USB flash memory device while it is playing, the center display and the audio screen (if selected) show NO DATA. 374 2013 TL12/07/20 11:18:07 31TK4640_380 USB Flash Memory Device Error Messages (Models with navigation system) If you see an error message in the center display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer. Error Message Solution FILE ERROR UNSUPPORTED UNPLAYABLE FILE NO SONG The system cannot read the file(s). Check the files in the USB flash memory device. There is a possibility that the files have been damaged. Appears when an unsupported USB flash memory device is inserted. Appears when the file is copyright protected, such as DRM. Appears when there are no playable files in the USB flash memory device. 375 2013 TL12/07/20 11:18:12 31TK4640_381 Bluetooth Audio System (Models with navigation system) NAVIGATION SCREEN CENTER DISPLAY HDD/AUX BUTTON SKIP BAR TITLE BUTTON AUDIO BUTTON 376 INTERFACE DIAL 2013 TL12/07/20 11:18:21 31TK4640_382 Bluetooth Audio System (Models with navigation system) Your vehicle is equipped with a Audio system, which Bluetooth allows you to listen to streaming Audio audio from your compatible phone. This function is only available on phones that are paired and linked to the vehicle’s Bluetooth system (see page HandsFreeLink (HFL) Bluetooth 432 ). To Play Bluetooth Audio Files ＊ Press the HDD/AUX button with the power mode ACCESSORY or ON. When the phone is recognized, Audio you will see the message and icon on the center display and the audio control display on the navigation screen (if selected), and the system begins to play. Bluetooth Not all Bluetooth-enabled phones with streaming audio capabilities are compatible with the system. You can find an approved phone by visiting , or by www.acura.com/handsfreelink calling the HandsFreeLink consumer support at 1-888-528-7876. In Canada, visit www.handsfreelink.ca or call (888) 528-7876. In some states, provinces, NOTE: and territories, it may be illegal to perform some data device functions while driving. Make sure that your phone is paired and linked to HFL. To begin to play the audio files, you may need to operate your phone. If so, follow the phone maker’s operating instructions. Your vehicle has the engine start/ stop button instead of an ignition switch. For more information on how to select the power mode, see page 184 ＊ If an iPod or USB flash memory device or audio unit connected to the auxiliary input jack was selected at the last mode, you will see iPod, USB or AUX in the center display and the audio control display on the navigation screen (if selected). Push the HDD/ AUX button again to play audio files from your Bluetooth Audio phone. CONTINUED 377 2013 TL12/07/20 11:18:29 31TK4640_383 Bluetooth Audio System (Models with navigation system) Once a device is linked, the name of the device will appear on the screen. Pressing the TITLE button switches the center display between the Audio and the device Bluetooth name. In the following conditions, the display shows ‘‘NO CONNECT’’ message after pressing the TITLE button. The phone is not linked to HFL. If more than one phone is paired to the HFL system, there will be a delay before the system begins to play. A device name may not be NOTE: displayed on some phone devices. The phone is not turned on. The phone is not in the vehicle. Another HFL compatible phone, which is not compatible for Audio, is already Bluetooth connected. Bluetooth Audio compatible If your phone does not operate as described, make sure it is an Acura approved phone. To find out if your phone is approved, go to www.acura.com/handsfreelink (in Canada, or call the HandsFreeLink consumer support at 1-888-528-7876. ), www.handsfreelink.ca 378 VoiceControlSystem You can select the AUX mode by using the voice control buttons, but cannot operate the play mode functions. Toskipafile Press the side of the SKIP bar to skip forward to the next file, and press the to the beginning of the current file. Push the side again to skip to the previous file. side to skip backward The skip function may not be NOTE: available on some phone devices. 2013 TL12/07/20 11:18:36 31TK4640_384 Topauseorresumeafile The resume/pause mode can stop playing a file temporarily. Bluetooth Audio System (Models with navigation system) Turn the interface dial to switch the setting between the resume/pause mode and the sound setup mode. Select Resume/Pause, then press ENTER to set your selection. Each time you press ENTER, the system switches between the resume mode and pause mode. The pause function may not NOTE: be available on some phone devices. Tochangesoundsettings Press the AUDIO button to display the audio control display. Turn the dial to switch the setting between the resume/pause mode and the sound setup mode. Select Sound Setup, then press ENTER to set your selection. CONTINUED 379 2013 TL12/07/20 11:18:43 31TK4640_385 Bluetooth Audio System (Models with navigation system) Turn the dial to select a sound setup mode, then press ENTER to set your selection. See page sound setting information. for more 296 Audio is playing, press the ToswitchtoHFLmode If you receive a call when the Bluetooth PICK-UP button on the steering wheel. The screen and the center display switch to the HFL mode (see page 427 ). This device complies with the appropriate requirements or the required standards. See page 628 more information. for Toturnoffthe Bluetooth Audio mode Select any other audio mode by pressing a button; AM/FM, DISC, or HDD/AUX on the audio control panel, or press the MODE button on the steering wheel to select another audio mode. Switching to another mode pauses the music playing from your phone. After ending the call, press the HANG-UP button to go back to the Bluetooth Audio mode. 380 2013 TL12/07/20 11:18:50 31TK4640_386 Protecting Your Discs General Information Onmodelswithoutnavigationsystem When using CD-R or CD-RW discs, use only high quality discs labeled for audio use. Onmodelswithnavigationsystem When using CD-R, CD-RW, DVD-R or DVD-RW discs, use only high quality discs labeled for audio use. Allmodels Play only standard, round, 5-inch (12 cm) discs. Smaller or odd- shaped discs may jam in the drive or cause other problems. When recording a CD-R or CD-RW, the recording must be closed for it to be used by the disc changer. When recording a CD-R, CD-RW, DVD-R or DVD-RW the recording must be closed for it to be used by the disc player. Handle your discs properly to prevent damage and skipping. When using DVD-R/RW discs, they should meet DVD verification standards. Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit. 381 2013 TL12/07/20 11:18:58 31TK4640_387 Protecting Your Discs Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat. To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge. A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen. Never try to insert foreign objects in the disc changer. 382 Additional Information on Recommended Discs The in-dash disc player has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit. Examples of these discs are shown as follows. Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from finger prints, liquids, and felt- tip pens, can cause the disc to not play properly, or possibly jam in the drive. 2013 TL12/07/20 11:19:10 31TK4640_388 1. Bubbled, wrinkled, labeled, and excessively thick discs 4. Small, irregular shaped discs Protecting Your Discs Bubbled/ Wrinkled With Label/ Sticker Using Printer Label Kit Sealed With Plastic Ring 3-inch (8-cm) CD Triangle Shape 2. Damaged discs 3. Poor quality discs Chipped/ Cracked Warped Burrs Can Shape Arrow Shape CONTINUED 383 2013 TL12/07/20 11:19:20 31TK4640_389 Protecting Your Discs 5. Discs with scratches, dirty discs Recommended discs are printed with the following logo. Fingerprints, scratches, etc. Onmodelswithoutnavigationsystem CD-R or CD-RW may not play due to the recording conditions. Onmodelswithnavigationsystem CD-R, CD-RW, DVD-R or DVD-RW may not play due to the recording conditions. Scratches and fingerprints on the discs may cause the sound to skip. 384 Audio unit may not play the following formats. This audio unit cannot play a Dual- disc . 2013 TL12/07/20 11:19:29 31TK4640_390 Radio Frequencies Your vehicle’s radio can receive the complete AM and FM bands. Those bands cover these frequencies: AM band: 530 to 1,710 kHz FM band: 87.7 to 107.9 MHz Radio stations on the AM band are assigned frequencies at least 10 kHz apart (530, 540, 550). Stations on the FM band are assigned frequencies at least 0.2 MHz apart (87.9, 88.1, 88.3). Stations must use these exact frequencies. It is fairly common for stations to round-off the frequency in their advertising, so your radio could display a frequency of 100.9 even though the announcer may identify the station as ‘‘FM101.’’ Radio Reception How well your vehicle’s radio receives stations is dependent on many factors, such as the distance from the station’s transmitter, nearby large objects, and atmospheric conditions. A radio station’s signal gets weaker as you get farther away from its transmitter. If you are listening to an AM station, you will notice the sound volume becoming weaker, and the station drifting in and out. If you are listening to an FM station, you will see the stereo indicator flickering off and on as the signal weakens. Eventually, the stereo indicator will go off and the sound will fade completely as you get out of range of the station’s signal. AM/FM Radio Reception Driving very near the transmitter of a station that is broadcasting on a frequency close to the frequency of the station you are listening to can also affect your radio’s reception. You may temporarily hear both stations, or hear only the station you are close to. CONTINUED 385 2013 TL12/07/20 11:19:35 31TK4640_391 AM/FM Radio Reception This device complies with the appropriate requirements or the required standards. See page 628 more information. for Radio signals, especially on the FM band, are deflected by large objects such as buildings and hills. Your radio then receives both the direct signal from the station’s transmitter, and the deflected signal. This causes the sound to distort or flutter. This is a main cause of poor radio reception in city driving. Radio reception can be affected by atmospheric conditions such as thunderstorms, high humidity, and even sunspots. You may be able to receive a distant radio station one day and not receive it the next day because of a change in conditions. Electrical interference from passing vehicles and stationary sources (such as garages or parking structures) can cause temporary reception problems. 386 2013 TL12/07/20 11:19:43 31TK4640_392 MODE BUTTON VOL BUTTON CH BUTTON Three controls for the audio system are mounted in the steering wheel hub. These let you control basic functions without removing your hand from the wheel. ▲ ) or down ( The VOL button adjusts the volume up ( ). Press the top or bottom of the button, hold it until the desired volume is reached, then release it. ▼ The MODE button changes the mode. Pressing the button repeatedly selects FM1, FM2, AM, XM1, XM2, disc (if a disc is loaded), HDD (on models with navigation system), AUX (if an appropriate audio unit is connected). Audio (if paired), Bluetooth If an iPod or a USB flash memory device is plugged into the system, you can also select AUX. ＋ If you are listening to the radio, use the CH button to change stations. Each time you press the top ( ) of the button, the system goes to the next preset station on the band you are listening to. Press the bottom − preset station. If you press and hold the CH button ( ), the system goes into the skip (seek) mode. It stops when it finds a station with a strong signal. ) to go back to the previous ) or ( ＋ − Remote Audio Controls

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2013 Acura TL Owners Manual