2013 Acura MDX Owners Manual

D-SCAN － This feature, when activated, samples the first track in each disc in order (the first file in the main folder on each disc in MP3 or WMA mode). To activate the disc scan feature, press and release the SCAN button repeatedly until D-SCAN shows in the display. The system will then play the first track/ file in the first main folder on the first disc for about 10 seconds. If you do nothing, the system will then play the following first tracks/files for 10
seconds each. When it plays a track/ file that you want to continue listening to, press and hold the SCAN button again.

When the first track in the last disc, or the first file in the last main folder in the last disc begins to play, the disc scan mode will be canceled. Pressing either skip button or selecting a different folder with the TUNE knob also turns off the scan feature. Each time you press and release the SCAN button, the mode changes from scan, disc scan, then to normal playing. InMP3orWMAmode Each time you press and release the SCAN button, the mode changes from file scan, folder scan, disc scan, then to normal playing.

InMP3orWMAmode F-SCAN － This feature, when activated, samples the first file in each folder on the disc in the order they are recorded. To activate the folder scan feature, press and release the SCAN button repeatedly. You will see F-SCAN in the display. The system will then play the first file in the main folders for about 10
seconds. If you do nothing, the system will then play the following first files for 10 seconds each. When it plays a file that you want to continue listening to, press and hold the SCAN button. Pressing either SKIP button, or selecting a different disc (using the preset buttons) or folder (using the TUNE knob) turns off the SCAN or F-SCAN feature.

CONTINUED 209

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing Discs (Models without navigation system)

) to

To Stop Playing a Disc Press the eject button ( remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload the disc after 10 seconds. To begin playing, press the DISC button. You can also eject the disc when the ignition switch is off. To play the radio when a disc is playing, press the AM or FM button. Press the DISC button again to switch back to the disc changer.

If you turn the system off while a disc is playing, either with the VOL/ knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off. RemovingDiscsfromthe In-dashDiscChanger To remove the disc currently in play, press the eject button. When a disc is removed from a slot, the system automatically begins the load sequence so you can load another disc in that position. If you do not remove the disc from the changer within 10 seconds, the disc will reload into the slot. Then the system returns to the previous mode (AM, FM, or XM).

To remove a different disc from the changer, first select it with the appropriate preset button. When that disc begins playing, press the eject button. Continue pressing the eject button to remove all the discs from the changer. You can also eject discs when the ignition switch is off. The disc that was last selected is ejected first. Protecting Discs For information on how to handle and protect compact discs, see page 247.

210

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Disc Changer Error Message (Models without navigation system)

Error Message

HEAT ERROR

Cause High temperature

FORMAT

Track/File format not supported

BAD DISC －

PLEASE CHECK

OWNER'S

MANUAL PUSH

EJECT

BAD DISC －

PLEASE CHECK

OWNER'S MANUAL

Mechanical Error

Servo Error

The chart on the right explains the error messages you may see in the display while playing a disc. If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For the additional information on damaged discs, see page 248. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

Solution

Will disappear when the temperature returns to normal. Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button and pull out the disc(s). Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 248). Insert the disc again. If the code does not disappear, or the disc(s) cannot be removed, consult your dealer. Do not try to force the disc out of the player.

211

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Audio System (Models with navigation system)

Interface Dial Most audio system functions can still be controlled by standard buttons, dials, and knobs, but some functions can only be accessed using the interface dial. The interface dial has two parts, a knob and a selector.

KNOB

ENTER

The knob turns left and right. Use it to make selections or adjustments to a list or menu on the screen. The selector can be pushed left, right, up, down, and in. Use the selector to scroll through lists, to select menus, and to highlight menu items. When you make a selection, push the center of the selector (ENTER) to go to that selection.

Personalization Setting When you unlock the doors with your remote and turn the audio system on, the driver's ID (Driver 1
or Driver 2) is detected, and the radio presets and sound level settings (see page 222) are turned to the respective memorized mode automatically. Voice Control System The audio system, including the music search feature Song By Voice™, can be operated by the voice control. See the navigation system manual for complete details.

SELECTOR

212

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

NAVIGATION SCREEN

Without rear entertainment system

AUDIO DISPLAY

A.SEL (AUTO SELECT) BUTTON

With rear entertainment system

A.SEL (AUTO SELECT) BUTTON

AUDIO DISPLAY

TITLE BUTTON

SCAN BUTTON

TITLE BUTTON

AM/FM BUTTON

VOL/Ⴛ (VOLUME/ POWER) KNOB CANCEL BUTTON AUDIO BUTTON

SKIP/ CATEGORY BUTTONS TUNE (SOUND) KNOB PRESET BUTTONS

AM/FM BUTTON VOL/Ⴛ (VOLUME/ POWER) KNOB

CANCEL BUTTON AUDIO BUTTON

INTERFACE DIAL

PRESET BUTTONS SKIP/ CATEGORY BUTTONS TUNE (SOUND) KNOB SCAN BUTTON

INTERFACE DIAL

CONTINUED 213

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

To Play the AM/FM Radio

STEREO INDICATOR BAND

The ignition switch must be in the ACCESSORY (I) or the ON (II) position. Press the AUDIO button to view the audio control display. Turn the system on by pressing the VOL/

button or the AM/FM button. Adjust the volume by turning the VOL/ knob.

214

The band and frequency that the radio was last tuned to are shown on the display. To change bands, press the AM/FM button. You can also change bands by pushing the interface selector up. Each time you push it up, the band will change to FM1, FM2, or AM. On the FM bands, STEREO will be shown on the navigation screen and ST on the audio display, if the station is broadcasting in stereo. Stereo reproduction on AM is not available. To Select a Station You can use any of five methods to find radio stations on the selected band: tune, skip (seek), scan, the preset buttons, and auto select. On the FM band, you can also use the features provided by the radio data system (RDS). For more information on the RDS, see page 217.

TUNE ICON

TUNE － Use the TUNE knob to tune the radio to a desired frequency. Turn the knob right to tune to a higher frequency, or left to tune to a lower frequency. To tune with the interface dial, push the selector down, and turn the knob to TUNE. Then press ENTER on the selector, and turn the knob to the desired frequency. To exit the TUNE mode, press ENTER on the interface selector, then push the interface selector up to go back.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

SKIP (SEEK) － The skip (seek) function searches up and down from the current frequency to find a station with a strong signal. To activate it, press either side (

or

) of the SKIP button, then

release it.

Playing the AM/FM Radio (Models with navigation system)

SCAN INDICATOR

SCAN ICON

SCAN － The SCAN function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it.

To scan with the interface dial, push the selector down, and turn the interface dial to select Scan, then press ENTER on the interface selector. When it finds a strong signal, it will stop and play that station for about 10
seconds. If you do nothing, the system will then scan for the next strong station and play it for 10
seconds. When it plays a station that you want to listen to, press the SCAN button again.

CONTINUED 215

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

Preset － Each preset button or preset icon can store one frequency on AM and two frequencies on FM. Tostoreapresetmemorylocation: 1. Select the desired band, AM or FM. FM1 and FM2 let you store two sets of FM frequencies with the preset buttons (on-screen icons).

2. Use the tune, skip (seek), scan, or RDS function to tune the radio to a desired station.

3. Press the preset button, and hold it until you hear a beep. You can also store frequencies with the interface dial. Select the preset icon you want to store the frequency on, then press ENTER on the interface selector, and hold it for more than 2 seconds.

4. Repeat steps 1 through 3 to store a

total of six stations on AM and twelve stations on FM.

216

A.SEL INDICATOR

A.SEL ICON

AUTO SELECT － If you are traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area. Push the interface selector down to scroll down the navigation screen, highlight A.SEL, then press ENTER on the interface selector. You will see A.SEL on the audio display (if selected), and the system goes into auto select mode for several seconds.

You can also press the A.SEL button. You will see A.SEL on the audio display and the navigation screen, and the system goes into scan mode for several seconds. The system stores the frequencies of six AM and twelve FM stations in the preset buttons. You will see ‘‘0’’ displayed if auto select cannot find a strong station for every preset button. If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons (icons) as previously described. To cancel auto select, select A.SEL on the audio menu again and turn the interface dial to select A.SEL OFF, or press the A.SEL button again. This restores the presets you originally set.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

Radio Data System (RDS) On the FM band, you can select a favorite station and display the program service name according to the information provided by the radio data system (RDS) if the station has the RDS information available. RDSINFODisplay The RDS INFO display function shows the name of the station you are listening to. With the audio system on and the FM band selected, you can turn this function on or off.

RDS INFO MESSAGE

To switch the RDS INFO display function on and off, press and release the TITLE button. With the system on, you will see the ‘‘RDS INFO ON’’ message on the audio display. If the station you are listening to is an RDS station, the displayed frequency switches to the station name.

If the station you are listening to is not an RDS station, the navigation screen and the audio display continue to show the frequency. When you turn off this function by pressing the TITLE button, the audio display shows ‘‘RDS INFO OFF.’’ NOTE: If the station you are listening to is an RDS station, the audio screen will always display the RDS information.

CONTINUED 217

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

ALL: All RDS category stations COUNTRY: Country music. TOP 40: Top 40 hits ROCK: Rock, classic rock and soft rock music OLDIES: Nostalgia music and oldies JAZZ: Jazz SOFT: Adult hits and soft music R & B: Rhythm and blues, and soft rhythm and blues CLASSIC: Classical music RELIGION: Programs concerned with religion INFO: News, information, sports, talk, foreign language, personality, public, college, and weather TRAFFIC: Traffic information

RadioDataSystem(RDS)Category

RDS SEARCH ICON

With the FM band selected, you can select the program type provided by the RDS. Press the AUDIO button to display the radio information on the navigation screen. Push down the interface selector, then turn the interface dial to select RDS Search. Press ENTER to set your selection. The principal RDS categories are shown as follows:

218

RDS CATEGORY

Turn the interface dial to select an RDS category. You can use the search or scan function to find radio stations on the selected RDS category by pressing the interface selector to the left or the right. Press ENTER to set your selection. If you do nothing while the RDS category is selected, the selected category is canceled.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

RDSCategorySearch This function searches up and down for strong signal frequencies that carries the selected RDS category information. This can help you to find a station in your favorite category. To activate it, push the AUDIO button to display the FM radio information on the navigation screen. Push the interface selector down, and turn the interface dial to select RDS search. Press ENTER on the interface selector. The screen shows you the RDS category list.

SEEK/SCAN ICON(RDS Search mode)

RDS CATEGORY LIST

SEEK is selected.

RDS CATEGORY

You can also select an RDS category with the CATEGORY button. Press either side ( ) of the CATEGORY button to display an RDS category in the audio display. Select a category by pressing either side of the button.

or

CONTINUED 219

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

RDSCategorySCAN The scan function samples all stations with strong signals on the selected RDS category one by one. To activate it, push the AUDIO button to display the FM radio information on the navigation screen. Push the interface selector down, and turn the interface dial to select RDS search on the audio menu. Press ENTER on the interface selector. The screen shows you the RDS category list.

SEEK/SCAN ICON(RDS Search mode)

RDS CATEGORY LIST

SCAN is selected.

Turn the interface dial to the desired RDS category. While the RDS category is selected, move the interface selector to the left or right to select SEEK up, SEEK down, or SCAN in the upper right corner of the navigation screen. When you press and release ENTER to select the RDS category, RDS category search (SEEK up/ down) starts. If the system does not find a station, ‘‘NOTHING’’ blinks for about five seconds on the audio display, then ‘‘NOTHING’’ blinks for about five seconds on the navigation screen and the system will go back to the last selected station.

220

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

RadioTextDisplay This function displays the radio text information of the selected RDS station. If the selected RDS station has the radio text information, you will see the text indicator on the navigation screen.

Turn the interface dial to the desired RDS category. While the RDS category is selected, move the interface selector to the left or the right to select SCAN. When you press and release ENTER to select the RDS category, RDS program SCAN starts. The system will scan for a station with a strong signal in the selected RDS category. You will also see the selected RDS category name blinking in the audio display while scanning it. When the system finds one, it will stop and play that station for about 10 seconds. If you do nothing, the system will scan for the next strong station and play it for 10 seconds. When it plays a station that you want to listen to, press the CANCEL button. If the system does not find a station, ‘‘NOTHING’’ blinks for about five seconds on the audio display, then ‘‘NOTHING’’ blinks for about five seconds on the navigation screen and the system will go back to the last selected station.

TEXT INDICATOR

RDS RADIO TEXT ICON

To activate radio text display, use the interface dial. Push the interface selector down, and turn the interface dial to select Read Radio Text. Press ENTER on the interface selector to enter the setting.

CONTINUED 221

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

Adjusting the Sound BASS, TREBLE, FADER, and BALANCE are each adjustable. You can also adjust the strength of the sound coming from the center and subwoofer speakers. In addition, you can set the Dolby PL (ProLogic) II and Speed-sensitive volume compensation (SVC). These adjustments can be made with the TUNE (SOUND) knob or the interface dial.

SOUND SETUP ICON

To adjust the sound, press the AUDIO button, push the interface selector down, and turn the interface dial to Sound Setup. Then press ENTER on the interface selector. Select the mode you want to adjust by turning the interface dial.

The display shows up to 64
characters on the selected RDS station.

222

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

The system will return to the audio playing mode in the center display about 10 seconds after you stop adjusting a mode. If you do not make an adjustment within 10 seconds, you will need to select the mode again. BASS/TREBLE － To adjust bass and treble, select BASS or TREBLE, and press ENTER on the interface selector. The current setting is shown on the display. Turn the interface dial or TUNE (SOUND) knob to the desired level, and enter your selection by pressing ENTER on the interface selector.

FADER/BALANCE － These modes adjust the strength of the sound coming from each speaker. Fader adjusts the front-to-back strength, while balance adjusts the side-to-side strength. To adjust fader and balance, select FADER or BALANCE, then press ENTER on the interface selector. The current setting is shown on the navigation screen. Turn the interface dial or TUNE (SOUND) knob to the desired level, and enter your selection by pressing ENTER on the interface selector. To equalize the fader or balance, turn the interface dial or TUNE (SOUND) knob until the marks on the sound grid come to the center of the adjustment bar. If the fader adjustment is set to F9
(maximum front level), the subwoofer is turned off.

CONTINUED 223

You can also adjust the sound by pushing TUNE (SOUND) knob repeatedly. Each mode is shown in the audio display as you push the button. Turn the TUNE (SOUND) knob or interface knob to adjust the setting to your liking. You can check the level on the navigation screen or on the audio display. When the level reaches the center, you will see ‘‘C’’ in the audio display, and ‘‘CTR’’ on the navigation screen.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

CENTER － Adjusts the strength of sound from the center speaker. SUBWOOFER － To adjust the strength of the sound from the subwoofer speaker, select it and press ENTER on the interface selector. Turn the interface dial to the desired level, and enter your selection by pressing ENTER on the interface selector.

Speed-sensitiveVolume Compensation(SVC) The SVC mode controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. The SVC has four modes: OFF, LOW, MID, and HIGH. To change the SVC mode, select SVC, then press ENTER on the interface selector. The current setting is shown on the screen. Turn the interface dial to the desired level, and enter your selection by pressing ENTER on the interface selector. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose high.

Dolby PL (ProLogic) II － Dolby PL (ProLogic) II signal processing creates multi-channel surround sound from 2 channel stereo audio sources. Dolby ProLogic II can only be activated when listening to DISC (CD-DA, MP3, WMA, AAC), XM Radio, AUX (USB, iPod® , AUX, Bluetooth®Audio), and HDD Audio. When ProLogic II is available, ‘‘PL II’’ is shown in the audio display. When ProLogic II is not available in the selected audio source, ‘‘PL II N/ A’’ is shown on the center display. ProLogic ON/OFF settings are independently controlled for DISC, XM, HDD Audio, and AUX sources.

224

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the AM/FM Radio (Models with navigation system)

To set this feature on or off, select Dolby PL II, and press ENTER on the interface selector. Rotate the interface dial to ON or OFF, and press ENTER. Manufactured under license from Dolby Laboratories. Dolby, Pro Logic, MLP Lossless, and the double- D symbol are trademarks of Dolby Laboratories.

NOTE: In some audio playing modes (XM, AUX), when DPLII is on, the music coming from the rear speakers may sound distorted. This is due to compression of the music, and it does not indicate a problem with the setting.

225

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

Without rear entertainment system

AUDIO DISPLAY

NAVIGATION SCREEN

With rear entertainment system AUDIO DISPLAY

SCAN BUTTON

TITLE BUTTON

SKIP/ CATEGORY BUTTONS TUNE (SOUND) KNOB PRESET BUTTONS

XM RADIO BUTTON VOL/Ⴛ (VOLUME/ POWER) KNOB

AUDIO BUTTON

INTERFACE DIAL

INTERFACE DIAL

PRESET BUTTONS SKIP/ CATEGORY BUTTONS

TUNE (SOUND) KNOB

SCAN BUTTON TITLE BUTTON

XM RADIO BUTTON

VOL/Ⴛ (VOLUME/ POWER) KNOB AUDIO BUTTON

226

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Your vehicle is capable of receiving XM® Radio anywhere in the United States, and Canada, except Hawaii, Alaska and Puerto Rico. XM is a registered trademark of Sirius XM Radio, Inc. and XM CANADA® is a registered business name of Canadian Satellite Radio Inc. XM Radio receives signals from two satellites to produce clear, high- quality digital reception. It offers many channels in several categories. Along with a large selection of different types of music, XM Radio also allows you to view channel and category selections in the audio display.

Playing the XM® Radio (Models with navigation system)

Operating the XM Radio

Each time you push the interface selector up, the band will change to XM1 or XM2. Push the AUDIO button to display XM information on the navigation screen. You can operate the XM Radio system with the interface dial.

To listen to XM Radio, turn the ignition switch to the ACCESSORY (I) or ON (II) position. Push the VOL/ knob to turn on the audio system, and press the button. The last channel you listened to will show in the Audio display. Adjust the volume by turning the VOL/ knob.

CONTINUED 227

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

MODE － To switch between the category mode and channel mode, push the interface selector down to display AUDIO MENU, then turn the interface dial to select Mode, and press ENTER on the interface selector. Turn the interface dial to select CH or CAT, then press ENTER on the interface selector. Move the interface selector up to go back. You can also switch the mode by pressing the TITLE button for 3
seconds. In the category mode, such as Jazz, Rock, Classical, etc., you can navigate through all of the channels within that category. In the channel mode, you can select all of the available channels.

Each time you press and release the TITLE button, the audio display changes in the following sequence: CATEGORY NAME,NAME (artist name), TITLE (music title), CHANNEL NAME, and CHANNEL. On the navigation screen, you will see the selected CHANNEL (number), CATEGORY, NAME (artist name), and TITLE (music title). You may experience periods when XM Radio does not transmit the artist's name and song title information. If this happens, there is nothing wrong with your system.

228

TUNE － Turn the tune knob left or right to select channels. You can also change channels with the interface selector, push down the interface selector to select AUDIO MENU, then turn the interface dial to choose Tune and press ENTER on the interface selector. Turn the interface dial to the appropriate direction. In the category mode, you can only select channels within that category. CHANNEL LIST － Push down the interface selector to select AUDIO MENU, then turn the interface dial to select Channel List and press ENTER on the selector. Turn the interface dial to select a channel, then press ENTER to set your selection. CATEGORY ( either side of the button to select another category.

) － Press

or

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

SCAN － The scan function gives you a sampling of all channels while in the channel mode. In the category mode, only the channels within that category are scanned. To activate SCAN, press the SCAN button. You will see SCAN on the screen and audio display. The system plays each channel in numerical order for about 10
seconds, then selects the next channel. When you hear a channel you want to continue listening to, press the SCAN button to cancel. CHANNEL SCAN － This function samples all channels. Push down the interface selector to select AUDIO MENU, then turn the interface dial to select Channel Scan and press ENTER on the interface selector.

CATEGORY SCAN ICON

CATEGORY SCAN － This function samples the stations in the selected category. Push down the interface selector to select AUDIO MENU, then turn the interface dial to select Category Scan and press ENTER on the interface selector.

BAND

Preset － You can store up to 12
preset channels using the six preset buttons. Each button stores one channel from the XM1 band and one channel from the XM2 band. To store a channel: 1. Press the

button. Either

XM1 or XM2 will be shown on the display.

CONTINUED 229

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

Once a channel is stored, press and release the proper preset button to tune to it.

XM Radio Display Messages ‘‘OFF AIR’’ － The channel currently selected is no longer broadcasting. ‘‘LOADING’’ － XM is loading the audio or program information. ‘‘UPDATING’’ － The encryption code is being updated. Wait until the encryption code is fully updated. Channels 0 and 1 should still work normally.

’’ － The selected channel

‘‘NO SIGNAL’’ － The signal is currently too weak. Move the vehicle to an area away from tall buildings, and with an unobstructed view of the southern horizon. ‘‘ number does not exist, or is not part of your subscription, or this channel has no artist or title information at this time. ‘‘CHECK ANTENNA’’ － There is a problem with the XM antenna. Please consult your dealer.

2. Use the tune, list, or scan function

to tune to a desired channel. In category mode, only channels within that category can be selected. In channel mode, all channels can be selected.

3. Pick the preset button you want for

that channel. Press and hold the preset button until you hear a beep. You can also pick the number with the interface dial. Select your desired number and press and hold ENTER on the interface selector.

4. Repeat steps 2 and 3 to store the

first six channels.

5. Press the

button or scroll up again. The other XM band will be shown. Store the next six channels using steps 2 and 3.

230

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

Signal may be blocked by mountains or large obstacles to the south.

Signal weaker in these areas.

The XM satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. To help compensate for this, ground-based repeaters are placed in major metropolitan areas. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.

SATELLITE

GROUND REPEATER

CONTINUED 231

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

This device complies with the appropriate requirements or the required standards. See page 592 for more information.

NoteFunction Ifequipped This function stores the sound content played on the selected XM satellite radio station with the channel, category, name, and title information. To activate this function, press and hold the button for about 2
seconds while a song or passage which you want to store is playing. You can record for up to 10 seconds. To stop recording, press the AM/ FM button or Once you store the recorded sound file, you can replay it and confirm the information. The system can store up to 30 sound files. If you continue to store more files, the oldest one will be deleted each time you add a new file.

button.

Depending on where you drive, you may experience reception problems. Interference can be caused by any of these conditions: ● Driving on the north side of an

east/west mountain road.

● Driving on the north side of a large commercial truck on an east/west road.

● Driving in tunnels. ● Driving on a road beside a vertical wall, steep cliff, or hill to the south of you.

● Driving on the lower level of a

multi-tiered road.

● Driving on a single lane road

alongside dense trees taller than 50 ft. (15 m) to the south of you.

There may be other geographic situations that could affect XM Radio reception.

232

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

To delete a file, push the interface selector to the right to select ‘‘DELETE.’’ Select ‘‘DELETE ALL’’ or ‘‘DELETE SELECTED ITEM,’’ then press ENTER on the interface selector.

NOTE ICON

SOUND FILE RECORDED DATE

Turn the selector dial to select a sound file, then press ENTER. The display shows the category, name and title information of the selected file.

To replay and see the stored file, press the AUDIO button to select the audio display on the navigation screen. Push down the interface selector to display the audio menu. Turn the interface dial to select Note, then press ENTER.

CONTINUED 233

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing the XM® Radio (Models with navigation system)

After you have registered with XM Radio, keep your audio system in the XM Radio mode while you wait for activation. This should take about 30
minutes. While waiting for activation, make sure your vehicle remains in an open area with good reception. Once your audio system is activated, CAT (category) or CH (channel) will appear in the audio display, and you'll be able to listen to XM Radio broadcasts. XM Radio will continue to send an activation signal to your vehicle for at least 12 hours from the activation request. If the service has not been activated after 36 hours, contact XM® Radio. In Canada, contact XM CANADA®.

Receiving XM Radio Service If your XM Radio service has expired or you purchased your vehicle from a previous owner, you can listen to a sampling of the broadcasts available on XM Radio. With the ignition switch in the ACCESSORY (I) or the ON (II) position, press the button. A variety of music types and styles will play. If you decide to purchase XM Radio service, contact XM Radio at www.siriusxm.com, or at 1-800-852-9696. In Canada www.xmradio.ca, or at call 1-877-209-0079. You will need to give them your radio I.D. number and your credit card number. To get your radio I.D. number, turn the TUNE knob until ‘‘0’’ appears in the display. Your I.D. will appear in the displays.

contact XM CANADA®

234

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Without rear entertainment system

With rear entertainment system

NAVIGATION SCREEN

AUDIO DISPLAY

TITLE BUTTON

VOL/Ⴛ (VOLUME/POWER) KNOB

SCAN BUTTON REPEAT BUTTON

DISC SLOT RANDOM BUTTON SKIP BUTTONS

TITLE BUTTON EJECT BUTTON

VOL/Ⴛ (VOLUME/POWER) KNOB

DISC BUTTON

SCAN BUTTON REPEAT BUTTON

INTERFACE DIAL

INTERFACE DIAL

AUDIO DISPLAY

SKIP BUTTONS

EJECT BUTTON

DISC BUTTON

CONTINUED 235

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Your vehicle's audio system has an internal disc player. To operate the disc player, the ignition switch must be in the ACCESSORY (I) or the ON (II) position. The disc player can play these disc formats: ● CD (CD-DA) ● CD-R/RW (MP3, WMA, AAC) ● DVD-A ● DVD-R/RW The disc packages or jackets should have one of these marks.

236

The disc player can also play MP3, WMA, or AAC format that saved on CD-R/RW or DVD-R/ RW (see page 241). NOTE: If a file on an MP3, WMA, or ACC disk is protected by digital rights management (DRM), the audio system skips to the next file. DVD-A discs not meeting DVD verification standards may not be playable. Some CD-DA and CD-ROM mixed discs are not playable. OnmodelswithoutRear EntertainmentSystem Video CDs and DVD-V format discs will not work in this unit.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

To Load a Disc Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way to play it. You operate the disc player with the same controls used for the radio. The number of the current track is shown in the display. When playing a disc in MP3, WMA or AAC, the numbers of the current folder and file are shown. The system will continuously play a disc until you change modes. For information on how to handle and protect compact discs, see page 247.

To Play a Disc Select the disc player by pressing the DISC button. The system will begin playing the last selected track in the disc. You will see the current track position highlighted. Title information will be displayed by a list when the information is found in the Gracenoteᤎ Album Info (Gracenoteᤎ Media Database) on the built-in hard disk drive. When you play a CD recorded with text data, you will see the genre, artist name, album and track name on the screen. When you play MP3/WMA/AAC discs, you will see the genre, artist name, album name and track name on the screen. If the disc was not recorded with this information, it will not be displayed.

It is possible to select up to 999 files for inclusion in CD-Rs and CD-RWs, and up to 3,500 files for inclusion in DVD-Rs and DVD-RWs.

Donotusediscswithadhesivelabels. Thelabelcancurlupandcausethedisc tojamintheunit.

Manufactured under license under U.S. Patent’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. All Rights Reserved. Reverse engineering or disassembly is prohibited.

CONTINUED 237

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

To Change Tracks Each time you press and release the

side of the skip button, the

side

player skips forward to the beginning of the next track. Press and release the side of the skip button to skip backward to the beginning of the current track. Press the again to skip to the previous track. To move rapidly within a track, press and hold either side of the skip button. When you insert a CD for the first time, the system automatically starts recording to the hard disc. For information on recording from music CDs, see page 253.

To Choose a Track

TRACK LIST

You can also choose a track directly from a track list. If there are no track names, you will see ‘‘No Title’’ displayed. Turn the interface dial to select the desired track, then press ENTER on the interface selector.

Each time you press the TITLE button, the audio display changes from artist name to album name, to track name and then to normal display that shows the track number and the elapsed time. When playing a disc in MP3/WMA/AAC, the display mode changes from folder name, to file name, to artist tag, to album tag, to track tag, and then to normal display.

238

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Track Repeat

TRACK REPEAT INDICATOR

REPEAT OFF ICON

To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.

Random Play

TRACK RANDOM INDICATOR

TRACK REPEAT ICON

To replay the current track continuously, push the interface selector down while playing a disc. Turn the interface dial to select Repeat on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the Repeat icon, and press ENTER on the interface selector.

RANDOM OFF ICON TRACK RANDOM ICON This feature plays the tracks within a disc in random order. When playing MP3, WMA or AAC format discs, all the tracks within the disc are played in random order, regardless of the configuration of the folder. Push the interface selector down while playing a disc. Turn the interface dial to select Random on the AUDIO MENU, and press ENTER on the interface selector.

CONTINUED 239

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Track Scan

Turn the interface dial to select the track random icon, and press ENTER on the interface selector. To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.

SCAN ICON

The scan function samples all tracks on the disc in the order they are recorded on the disc. To activate scan, press the SCAN button, or push the interface selector down while playing a disc. Turn the interface dial to select Scan on the AUDIO MENU, and press ENTER on the interface selector.

240

Turn the interface dial to select the Scan icon, and press ENTER on the interface selector. You will hear a 10- second sampling of each track on the disc. When you return to disc mode, the disc will begin playing from where it left off. To turn this feature off, press the SCAN button again, or turn the interface dial to select the OFF icon, and press ENTER on the interface selector. The system begins to play the last track sampled.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Depending on the software the files were made with, it may not be possible to play some files, or display some text data.

To Stop Playing a Disc To take the system out of disc mode, press the AM/FM button, the button, or the HDD button. To return to disc mode, press the DISC button. If you turn the system off while a disc is playing, either with the VOL/ knob or the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.

Playing an MP3/WMA/AAC Disc This audio system plays CD-ROM, CD-R/RW, DVD-ROM, and DVD-R/RW compressed in MP3, WMA, or AAC formats. You can select up to 255 folders or tracks.

Disc

Maximum foldersᤳ

Maximum Files

Maximum layersᤳ

CD-ROM CD-R CD-RW DVD-ROM DVD-R DVD-RW

255

255

999

3500

ᤳIncluding Root folder NOTE: Combining a low sampling frequency with a low bitrate may result in extremely degraded sound quality. To play an MP3/WMA/AAC disc, use the disc controls previously described, along with the following information.

CONTINUED 241

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

ChangingandSelecting the Folders/Files

Changing the Folders While playing an MP3/WMA/AAC disc, you can select a folder within the disc by pressing either side of the category button. Each time you press either side of the button, the folder title and its first file's information appear on the audio display and on the navigation screen in hierarchical order of the folders which contain files within the disc.

FOLDER LIST

Using the interface selector, you can see the list of all the folders within a disc. While playing an MP3/WMA/ AAC disc, push the interface selector up. The folder list in the currently playing disc will appear on the screen. If the root folder has some additional folders in the lower layer, they will be listed on the screen.

242

TRACK LIST

Select a desired folder by turning the interface dial, then press ENTER. The display returns to normal play, and the first track in the selected folder begins to play. To change a file, turn the interface dial to select a desired file, then press ENTER.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Folder Repeat

FOLDER REPEAT INDICATOR

REPEAT OFF ICON

To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.

Folder Random

FOLDER RANDOM INDICATOR

FOLDER REPEAT ICON

This feature, when activated, replays all files in the selected folder in the order they are compressed. To activate folder repeat play, push the interface selector down while playing a disc. Turn the interface dial to select Repeat on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder repeat icon, and press ENTER on the interface selector.

FOLDER RANDOM ICON

This feature, when activated, plays all files in the current folder in random order. To activate folder random play, push the interface selector down while playing a disc. Turn the interface dial to select Random on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder random icon, and press ENTER on the interface selector.

CONTINUED 243

2013 MDXThe system begins to play a file for about 10 seconds, and continues to sample the remaining files. To turn this feature off, press the SCAN button again, or select the OFF icon by turning the dial, then press ENTER.

12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector.

File Scan

FOLDER SCAN ICON

244

SCAN OFF ICON FILE SCAN ICON

This feature samples all files in the selected folder in the order they are stored. To activate this feature, press the SCAN button. You can also select the SCAN icon with the interface dial. Push the selector down, turn the dial to select Scan on the AUDIO MENU, then press ENTER. Turn the dial to select the scan icon, then press ENTER.

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Playing a Disc (Models with navigation system)

Folder Scan This feature, when activated, samples the first file of each folder for 10
seconds. To scan a folder, press the SCAN button. Or, push the interface selector down while playing a disc. Turn the interface dial to select Scan on the AUDIO MENU, and press ENTER on the interface selector. Turn the interface dial to select the folder scan icon, and press ENTER on the interface selector. The system plays the first file in the first folder for about 10 seconds. If you do nothing, the system will then play the first files in the next folders for 10 seconds. After playing the first file of the last folder, the system plays normally.

To turn this feature off, turn the interface dial to select the OFF icon, and press ENTER on the interface selector. The last track sampled begins to play. NOTE: When playing MP3, WMA or AAC format disc, each time you press the SCAN button, the system changes in the following sequence: Scan ᤫ Scan first track in folder ᤫ OFF ᤫ Scan. Removing Discs from the Disc Player To remove the disc, press the eject ( ) button. If you do not remove the disc from the slot, the system will reload the disc after 10 seconds. The disc starts playing automatically. Playing a DVD-A Disc Use the disc controls previously described.

245

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Disc Player Error Messages (Models with navigation system)

Error

Message BAD DISC

OWNER’S MANUAL BAD DISC

PLEASE CHECK

PLEASE CHECK

OWNER’S MANUAL

PUSH EJECT MECH ERROR CHECK DISC

CHECK DISC

LOAD

Cause

Solution

Press the eject button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 248). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player.

Servo Error

Mechanical Error

FOCUS Error Disc violates copyright Disc not supported Load Error

HEAT ERROR

High Temperature

Will disappear when the temperature returns to normal.

The chart on the right explains the error messages you may see in the audio display while playing a disc. If you see an error message in the audio display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For additional information on damaged discs, see page 248. The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc. Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.

246

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

General Information ● When using CD-R, CD-RW, DVD-R

or DVD-RW discs, use only high quality discs labeled for audio use. ● When recording a CD-R, CD-RW, DVD-R or DVD-RW the recording must be closed for it to be used by the disc player.

● When using DVD-R/RW discs,

they should meet DVD verification standards.

● Play only standard, round, 5-inch

(12 cm) discs. Smaller or odd- shaped discs may jam in the drive or cause other problems.

● Handle your discs properly to prevent damage and skipping.

Donotusediscswithadhesivelabels. Thelabelcancurlupandcausethedisc tojamintheunit.

Protecting Discs When a disc is not being played, store it in its case to protect it from dust and other contamination. To prevent warpage, keep discs out of direct sunlight and extreme heat. To clean a disc, use a clean soft cloth. Wipe across the disc from the center to the outside edge. A new disc may be rough on the inner and outer edges. The small plastic pieces causing this roughness can flake off and fall on the recording surface of the disc, causing skipping or other problems. Remove these pieces by rubbing the inner and outer edges with the side of a pencil or pen.

Protecting Your Discs

Never try to insert foreign objects in the disc player.

Handle a disc by its edges; never touch either surface. Do not place stabilizer rings or labels on the disc. These, along with contamination from finger prints, liquids, and felt-tip pens, can cause the disc to not play properly, or possibly jam in the drive.

CONTINUED 247

2013 MDX12/07/17 18:10:57 13 ACURA MDX MMC North America Owner's M 50 31STX660 enu

Protecting Your Discs

Additional Information on Recommended Discs The in-dash disc player has a sophisticated and delicate mechanism. If you insert a damaged disc as indicated in this section, it may become stuck inside and damage the audio unit. Examples of these discs are shown to the right:

1. Bubbled, wrinkled, labeled, and excessively thick discs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed

With Plastic Ring

2. Damaged discs

3. Poor quality discs

Chipped/ Cracked

Warped

Burrs

248