Back

 Project_vl_wagon[:'s Toyota - KE70  

Upload Entry
PROJECT_VL_WAGON[:
  • PROJECT_VL_WAGON[:
  • Why Drink N Drive When You Can Boost, N Slide
  • Member No.: 156,036
  • Joined: 17-January 09
  • Posts: 1,453
  • From: brissy
Post #1 post 2nd March 2009 - 02:36 AM
Hey all,

Just bought a 1984 model ke70 corolla as a daily/future drifter.

I bought it in primer. and just went for the cheaper option paint wise and its now matt black,

Its fairly clean considering the age,

got 151,000 on the clock.

Interior is the light browny/beigey colour. gonna retrim it soon. black red and white.

Got 3 gauges on the dash and 1 on the drivers side pillar.

standard exhaust atm. will have extractors and a 2inch system soon.

kenwood head deck,

Superlow kingsprings

Bonnet scoop

sitting on standard 13's but I'm gonna get 15x8 sportmax 002 rims, Red with a chrome lip. gonna get white wall tires

standard 4k engine. i have twin su's but i think I'm just gonna stick a weber on instead. i hear twin su's are pretty hard to tune properly? and if not tuned could flood the engine. IDk

and when I'm off p plate laws i'll get an engine conversion. probly just a ca18 turbs. or sr20.. maybe a rotary..

Its gonna take a while to complete, to the standards i want. And im only 16.. with not much cash as i got fired for shooting my brother with a nail gun... ( TOTALLY WORTH IT! )

But Ill be sure to keep you's all updated.

And if you're feeling generous maybe throw some ideas up and some info on how to get more power out of my 4k.

Cheers all. Keegan. [:

This post has been edited by PROJECT_VL_WAGON[:: Mar 2 2009, 05:01 PM
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota
Project_vl_wagon[:'s Toyota


--------------------
Ummm..


ANYONE WANT CABNETS OR SUB BOXES MADE CALL ME ON 0450268944 ALL WORK DONE GOOD AND CHEAP FOR CASH

CAN DO WHOLE KITCHENS THANKS
TOP

Comments

  • Boost Network 18
  • swinnei
    Post #2

    thats a ae71 im pretty sure, looks tight though

    trikzlane
    Post #3

    nice start, do a flat front convo and put some nice rims with decent offset then save for a 4age

    QUOTE(swinnei @ Mar 2 2009, 08:42 PM) [snapback]1283667121[/snapback]

    thats a ae71 im pretty sure, looks tight though


    no its a slanty front keto

    PROJECT_VL_WAGON[:
    Post #4

    QUOTE(swinnei @ Mar 2 2009, 08:42 PM) [snapback]1283667121[/snapback]

    thats a ae71 im pretty sure, looks tight though



    QUOTE(trikzlane @ Mar 2 2009, 08:45 PM) [snapback]1283667140[/snapback]

    nice start, do a flat front convo and put some nice rims with decent offset then save for a 4age
    no its a slanty front keto

    QUOTE
    thats a ae71 im pretty sure, looks tight though


    Nope KE70

    QUOTE
    nice start, do a flat front convo and put some nice rims with decent offset then save for a 4age


    I was thinking of a flat front conersion. with quad head lights. and in a couple of weeks i should hopefully have these rims.


    323
    Post #5

    It looks like a goer but I would get rid of that scoop, looks quite dicky in my opinion but each to their own. Very nice set of rims as well, but why red?

    PROJECT_VL_WAGON[:
    Post #6

    QUOTE
    It looks like a goer but I would get rid of that scoop, looks quite dicky in my opinion but each to their own. Very nice set of rims as well, but why red?


    Yer i will most likely get rid of the bonnet scoop.

    And im going red with a chrome lip. cause out of all the colours they come in i tihnk it will suit the rolla best.

    323
    Post #7

    Maybe do a touch of red in the interior to have the red equal out? otherwise it might drag your eyes to the ground not the whole car biggrin.gif

    robthebastard
    Post #8

    15's look shit on E7's and in -0 or more they are almost impossible to keep from scrubbing... sportmax is not a top idea.

    you need 14's.

    advan oni's are a good place to start. or SSR reverse mesh. will cost you about the same and look much better...

    -rtb.

    PROJECT_VL_WAGON[:
    Post #9

    QUOTE
    Maybe do a touch of red in the interior to have the red equal out? otherwise it might drag your eyes to the ground not the whole car


    As it says in my post. i am doing the interior red white and black..

    QUOTE
    15's look shit on E7's and in -0 or more they are almost impossible to keep from scrubbing... sportmax is not a top idea.

    you need 14's.

    advan oni's are a good place to start. or SSR reverse mesh. will cost you about the same and look much better...

    -rtb.


    Thats something to think about. I was told they wont scrub at all but now im not too sure. Cheers.

    Apros
    Post #10

    mate i think what you should do is sell it and buy a commdore.
    jkz keegan hahaha.
    i reckon prob get rid of the bonnet scoop and i reckon will look pretty mean with the red rims on it.
    GL with the progress mate.
    shannon.

    sanfrantic
    Post #11

    far king tough

    leave the scoop and put it to use with a 4AGZE

    and those red wheels rock

    PROJECT_VL_WAGON[:
    Post #12

    QUOTE
    far king tough

    leave the scoop and put it to use with a 4AGZE

    and those red wheels rock


    Yer i no doubt will stick a 4agze.. 20 valve. i love the high rev engines :L

    xr6turbo
    Post #13

    sell the car and buy a 4agze already in a corolla its not worth spending 4000 on a car worth 50 dollars

    Dshwam
    Post #14

    nice project
    all so i would take any oppotunity
    i had to shoot my brother with a nail gun

    dylandrum
    Post #15

    buy a SR20, buy a tight lsd/diff combo, dont paint it anymore, dont touch the inside, buy a good clutch, buy some mild mods for the SR to make it that tad more grunty, and your car is complete until you are off p-laws..

    also buy a drill, a few bags of cable ties and slide it as much as you can.


    that's what i'd do

    PROJECT_VL_WAGON[:
    Post #16



    buy a SR20, buy a tight lsd/diff combo, dont paint it anymore, dont touch the inside, buy a good clutch, buy some mild mods for the SR to make it that tad more grunty, and your car is complete until you are off p-laws..

    also buy a drill, a few bags of cable ties and slide it as much as you can.


    that's what i'd do

    I can't do that until im off my p plate laws. cause if i wanna use it as a daily i can't have a engine conversion cause it has to be mod plated. and i cant drive mod plated cars...


    QUOTE
    sell the car and buy a 4agze already in a corolla its not worth spending 4000 on a car worth 50 dollars


    Im keeping the car. its my project so i can spend whatever i want on it. I dont wanna buy a car already finished cause i dont know its been treated. eg; if its been flogged. what is wrong with it.. blah blah..

    Thats why it would be better to do it myself so i know its reliable..

    W1NT3R
    Post #17

    Same as my old rolla lol

    sanfrantic
    Post #18

    oh no -20V

    strongly against 20V's

    with the money you spend on a 20V conversion can make a 16V go way harder

    find yourself a bigport 4AGZE and work the head a little(port/polish etc.)

    works a treat when i was running the 4AGZE stupid P plater laws =[

    PROJECT_VL_WAGON[:
    Post #19

    I'll consider that then :L Cheers.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x