2011 Toyota Yaris Sedan Owners Manual

to secure

CAUTION

n Caution while driving

Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious injury.

n After adjusting the steering wheel

Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.

51

1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror

Glare from the headlights of vehicles behind can be reduced by using the following functions.

Normal position Anti-glare position

Adjusting the height of rear view mirror

Adjust the height of the rear view mirror by moving it up and down.

52

1-3. Adjustable components (seats, mirrors, steering wheel)

CAUTION

n Caution while driving

Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.

53

1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors

Mirror angle can be adjusted using the switch or lever.

Power-adjustable type

Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.

Manually adjustable type

Adjust the mirror up, down, in or out using the lever.

54

1-3. Adjustable components (seats, mirrors, steering wheel)

Folding back the mirrors

Push backward to fold the mir- rors.

n Mirror operating conditions (with power-adjustable type only)

The engine switch is in the ACC or ON position.

CAUTION

n When driving the vehicle

Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. l Do not adjust the mirrors while driving. l Do not drive with the mirrors folded back. l Both the driver and passenger side mirrors must be extended and properly

adjusted before driving.

55

1-3. Adjustable components (seats, mirrors, steering wheel)

NOTICE

n If ice should jam the mirror

Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror.

56

1

1-4. Opening and closing the windows Power windows∗

The power windows can be opened/closed using the following switches.

Driver’s power window switches

Closing Opening One-touch opening (driver’s window only)*

*: Pressing

the switch

the opposite direction will stop win- dow travel partway.

in

Front passenger’s power window switch

Closing Opening

Rear passenger’s power window switch

Closing Opening

∗: If equipped 57

1-4. Opening and closing the windows

Lock switch

Press the switch down to lock passenger window switches.

Use this switch to prevent chil- dren from accidentally opening or closing a passenger window.

n The power windows can be operated when

The engine switch is in the ON position.

n Operating the power windows after turning the engine switch off

(driver’s window only) The power windows can be operated for approximately 45 seconds even after the engine switch is turned off. They cannot, however, be operated once either front door is opened.

CAUTION

n Closing the windows

Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their body

in a position where it could be caught when a window is being operated.

l Do not allow children to operate the power windows.

Closing a power window on someone can cause serious injury, and in some instances, even death.

58

1-5. Refueling Opening the fuel tank cap

Perform the following steps to open the fuel tank cap. n Before refueling the vehicle

Turn the engine switch off and ensure that all the doors and win- dows are closed.

n Opening the fuel tank cap

Open the fuel filler door.

Turn the fuel tank cap slowly to open.

59

1-5. Refueling

Closing the fuel tank cap

Hang the fuel tank cap on the back of the fuel filler door.

When replacing the fuel tank cap, turn it until a clicking sound is heard.

After releasing your hand, the cap will turn slightly to the opposite direction.

n Fuel types

Unleaded gasoline. (Octane Rating 87 [Research Octane Number 91] or higher)

n Fuel tank capacity

Approximately 11.1 gal. (42.0 L, 9.2 Imp.gal.)

60

1

1-5. Refueling

CAUTION

n Refueling the vehicle

Observe the following precautions while refueling the vehicle. Failure to do so, may result in death or serious injury. l Touch the vehicle or some other metal surface to discharge any static

electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite.

l Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out of the filler neck and cause injury.

l Do not allow anyone that has not discharged static electricity from their

bodies to come close to an open fuel tank.

l Do not inhale vaporized fuel.

Fuel contains substances that are harmful if inhaled.

l Do not smoke while refueling the vehicle.

Doing so may cause the fuel to ignite and cause a fire.

l Do not return to the vehicle or touch any person or object that is statically

charged. This may cause static electricity to build up, resulting in a possible ignition hazard.

n When replacing the fuel tank cap

Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.

61

1-5. Refueling

NOTICE

n Refueling

Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.

62

1-6. Theft deterrent system Engine immobilizer system∗

The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle.

The indicator light flashes after the key has been removed from the engine switch to indi- cate that the system is operat- ing. The indicator light stops flash- ing after the registered key has been inserted into the engine switch to indicate that the system has been can- celed.

n System maintenance

The vehicle has a maintenance-free type engine immobilizer system.

n Conditions that may cause the system to malfunction

If the key is in contact with a metallic object If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle

∗: If equipped 63

1-6. Theft deterrent system

n Certifications for the engine immobilizer system

For vehicles sold in U.S.A.

FCC ID: MOZRI-20BTY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

For vehicles sold in Canada

This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

NOTICE

n To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

64

1-6. Theft deterrent system Alarm (Puerto Rico)

The system sounds the alarm and flashes lights when forcible entry is detected. n Triggering of the alarm

The alarm is triggered in the following situations when the alarm is set. l A locked door or trunk is unlocked or opened in any way other than using the key (vehicles without wireless remote control) or wireless remote control door lock function (vehicles with wireless remote control). (The doors will lock again automati- cally.)

l The hood is opened. l The battery is reconnected.

n Setting the alarm system

Close the doors, trunk and hood, and lock all doors using the key (vehicles without wire- less remote control) or wire- less remote control door lock function (vehicles with wire- less remote control). The sys- tem will be set automatically after 30 seconds. indicator

The light changes from being on to flashing when the system is set.

65

1-6. Theft deterrent system

n Deactivating or stopping the alarm

Do one of the following to deactivate or stop the alarm. l Unlock the doors or trunk. l Turn the engine switch to the ACC or ON position or start the engine. (The alarm will be deactivated or stopped after a few seconds.)

n System maintenance

The vehicle has a maintenance-free type alarm system.

n Items to check before locking the vehicle

To prevent unexpected triggering of the alarm and vehicle theft, make sure of the following. l Nobody is in the vehicle. l The windows are closed before the alarm is set. l No valuables or other personal items are left in the vehicle.

n Triggering of the alarm

The alarm may be triggered in the following situations. (Stopping the alarm deactivates the system.)

l A person inside the vehicle opens a

door, the trunk or hood.

66

1-6. Theft deterrent system

l The battery is recharged or replaced

when the vehicle is locked.

n When the battery is disconnected

Be sure to deactivate the alarm system. If the battery is discharged before deactivating the alarm system, the alarm may be triggered when the battery is reconnected.

n Alarm-operated door lock

l When the alarm is operating, the doors are locked automatically to pre-

vent intruders.

l Do not leave the key inside the vehicle when the alarm is operating, and make sure the key is not inside the vehicle when recharging or replacing the battery.

NOTICE

n To ensure the system operates correctly

Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.

67

1-6. Theft deterrent system Theft prevention labels (except Canada)

These labels are attached to the vehicle to reduce vehicle theft by facilitating the tracing and recovery of parts from sto- len vehicles. Do not remove under penalty of law.

68

1-7. Safety information Correct driving posture

Drive in a good posture as follows:

and to

Sit upright and well back in the seat. (→P. 37) Adjust the position of the seat forward or backward to ensure the pedals can be easily reached depressed the extent required. (→P. 37) Adjust the seatback so that the controls are easily oper- able. Adjust the tilt positions of the steering wheel down- ward so the airbag is facing your chest. (→P. 51) Lock the head restraint in place with the center of the head restraint closest to the top of your ears. (→P. 41) Wear the seat belt correctly. (→P. 44)

69

1-7. Safety information

CAUTION

n While driving

l Do not adjust the position of the driver’s seat while driving.

Doing so could cause the driver to lose control of the vehicle.

l Do not place a cushion between the driver or passenger and the seatback. A cushion may prevent correct posture from being achieved, and reduce the effectiveness of the seat belt and head restraint, increasing the risk of death or serious injury to the driver or passenger.

l Do not place anything under the front seats.

Objects placed under the front seats may become jammed in the seat tracks and stop the seat from locking in place. This may lead to an acci- dent. The adjustment mechanism may also be damaged.

n Adjusting the seat position

l Take care when adjusting the seat position to ensure that other passen-

gers are not injured by the moving seat.

l Do not put your hands under the seat or near the moving parts to avoid

injury. Fingers or hands may become jammed in the seat mechanism.

70

1-7. Safety information SRS airbags

The SRS airbags inflate when the vehicle is subjected to certain types of severe impacts that may cause significant injury to the occupants. They work together with the seat belts to help reduce the risk of death or serious injury.

Front airbags Driver airbag/front passenger airbag Can help protect the head and chest of the driver and front pas- senger from impact with interior components.

Side and curtain shield airbags Side airbags (if equipped) Can help protect the torso of the front seat occupants. Curtain shield airbags (if equipped) Can help protect primarily the head of outside occupants.

71

1-7. Safety information

Airbag system components

Front passenger airbag Curtain shield airbags (if equipped) Side airbags (if equipped) SRS warning light Curtain shield airbag sen- sors (if equipped) Driver airbag Side and curtain shield air- bag sensors (if equipped)

Driver’s seat position sen- sor Driver’s seat belt buckle switch AIR BAG ON and AIR BAG OFF indicator lights Front airbag sensors Airbag sensor assembly Front passenger’s seat belt buckle switch Occupant detection system (ECU and sensors)

72

1

1-7. Safety information

Your vehicle is equipped with ADVANCED AIRBAGS designed based on US motor vehicle safety standards (FMVSS208). The airbag sys- tem controls airbag deployment power for the driver and front pas- senger. The driver airbag system consists of the driver seat’s position sensor etc. The front passenger’s airbag system consists of the front passenger occupant classification sensor etc. The main SRS airbag system components are shown above. The SRS airbag system is controlled by the airbag sensor assembly. The airbag sensor assembly consists of a safing sensor and an airbag sensor. In certain types of severe frontal or side impacts, the SRS airbag sys- tem triggers the airbag inflators. A chemical reaction in the inflators quickly fills the airbags with non-toxic gas to help restrain the motion of the occupants.

n SRS warning light

This warning light system monitors the airbag sensor assembly, front airbag sensors, side and curtain shield airbag sensors, curtain shield airbag sen- sors, driver’s seat position sensor, driver’s seat belt buckle switch, front pas- senger occupant classification system, AIR BAG ON indicator light, AIR BAG OFF indicator light, front passenger’s seat belt buckle switch, seat belt pretensioner assemblies, interconnecting wiring and power sources. (→P. 302)

inflators,

n If the SRS airbags deploy (inflate)

l Bruising and slight abrasions may result from contact with a deploying

(inflating) SRS airbag.

l A loud noise and white powder will be emitted. l Vehicles with side and curtain shield airbags: Parts of the airbag module (steering wheel hub, airbag cover and inflator) as well as the front seats, and parts of the front and rear pillars and roof side rail, may be hot for several minutes. The airbag itself may also be hot.

l Vehicles without side and curtain shield airbags: Parts of the airbag mod- ule (steering wheel hub, airbag cover and inflator) as well as the front seats may be hot for several minutes. The airbag itself may also be hot.

73

1-7. Safety information

l The front windshield may crack.

n Operating conditions (front airbags)

l The SRS front airbags will deploy in the event of an impact that exceeds the set threshold level (the level of force corresponding to an approxi- mately 12-18 mph [20-30 km/h] frontal collision with a fixed wall that does not move or deform). However, this threshold velocity will be considerably higher if the vehicle strikes an object, such as a parked vehicle or sign pole, which can move or deform on impact, or if the vehicle is involved in an underride collision (e.g. a collision in which the front of the vehicle “underrides”, or goes under, the bed of a truck, etc.). It is possible that in some collisions where the forward deceleration of the vehicle is very close to the designed threshold level, the SRS front air- bags and the seat belt pretensioners may not activate together.

l The SRS front passenger airbag will not activate if there is no passenger sitting in the front passenger seat. However, the front passenger airbag may deploy if luggage is put in the seat, even if the seat is unoccupied. (→P. 83)

n Operating conditions (side airbags and curtain shield airbags [if

equipped]) l The SRS side airbag & SRS curtain shield airbag will deploy in the event of an impact that exceeds the set threshold level (the level of force corre- sponding to the impact force produced by an approximately 3307 lb. [1500 kg] vehicle colliding with the vehicle cabin from a direction perpen- dicular to the vehicle orientation at an approximately speed of 12-18 mph [20-30 km/h]).

l The SRS side airbag on the passenger seat will not activate if there is no passenger sitting in the front passenger seat. However, the side airbag on the passenger seat may deploy if luggage is put in the seat, even if the seat is unoccupied. (→P. 83)

74

1

1-7. Safety information

n Conditions under which the SRS airbags may deploy (inflate), other

than a collision The SRS front airbags may also deploy if a serious impact occurs to the underside of your vehicle. Some examples are shown in the illustration.

l Hitting a curb, edge of pavement or

hard surface

l Falling into or jumping over a deep hole l Landing hard or vehicle falling

n Types of collisions that may not deploy the SRS airbag (front airbags) The SRS front airbags are generally not designed to inflate if the vehicle is involved in a side or rear collision, if it rolls over, or if it is involved in a low- speed frontal collision. But, whenever a collision of any type causes suffi- cient forward deceleration of the vehicle, deployment of the SRS front air- bags may occur.

l Collision from the side l Collision from the rear l Vehicle rollover

75

1-7. Safety information

n Types of collisions that may not deploy the SRS airbag

(side airbags and curtain shield airbags [if equipped]) The SRS side airbag and curtain shield airbag system may not activate if the vehicle is subjected to a collision from the side at certain angles, or a colli- sion to the side of the vehicle body other than the passenger compartment.

l Collision from the side to the vehicle body other than the passenger com- partment

l Collision from the side at an angle

The SRS side airbags and curtain shield airbags are not generally designed to inflate if the vehicle is involved in a frontal or rear collision, if it rolls over, or if it is involved in a low-speed side collision.

l Collision from the front l Collision from the rear l Vehicle rollover

76

1

1-7. Safety information

n When to contact your Toyota dealer

In the following cases, contact your Toyota dealer as soon as possible. l Any of the SRS airbags have been inflated.

l The front of the vehicle is damaged or deformed, or was involved in an acci- dent that was not severe enough to cause the SRS airbags to inflate.

l Vehicles with side airbags and curtain shield airbags: A portion of a door is damaged or deformed, or the vehicle was involved in an accident that was not severe enough to cause the SRS side airbags and curtain shield airbags to inflate.

l The pad section of the steering wheel or dashboard near the front passenger airbag is scratched, cracked, or other- wise damaged.

l Vehicles with side airbags and curtain shield airbags: The surface of the seats with is scratched, cracked or otherwise damaged.

the side airbag

l Vehicles with side airbags and curtain shield airbags: The portion of the front pillars, rear pillars or roof side rail gar- nishes (padding) containing the curtain shield airbags is scratched, cracked or otherwise damaged.

inside

77

1-7. Safety information

CAUTION

n SRS airbag precautions

Observe the following precautions regarding the airbags. Failure to do so may cause death or serious injury. l The driver and all passengers in the vehicle must wear their seat belts

properly. The SRS airbags are supplemental devices to be used with the seat belts. l The SRS driver airbag deploys with considerable force, and can cause death or serious injury especially if the driver is very close to the airbag. The National Highway Traffic Safety Administration (“NHTSA”) advises: Since the risk zone for driver airbag is the first 2 - 3 in. (50 - 75 mm) of inflation, placing yourself 10 in. (250 mm) from your driver airbag provides you with a clear margin of safety. This distance is measured from the cen- ter of the steering wheel to your breastbone. If you sit less than 10 in. (250
mm) away now, you can change your driving position in several ways: • Move your seat to the rear as far as you can while still reaching the

pedals comfortably.

• Slightly recline the back of the seat.

Although vehicle designs vary, many drivers can achieve the 10 in. (250 mm) distance, even with the driver seat all the way forward, sim- ply by reclining the back of the seat somewhat. If reclining the back of your seat makes it hard to see the road, raise yourself by using a firm, non-slippery cushion, or raise the seat if your vehicle has that feature. • If your steering wheel is adjustable, tilt it downward. This points the air-

bag toward your chest instead of your head and neck.

The seat should be adjusted as recommended by NHTSA above, while still maintaining control of the foot pedals, steering wheel, and your view of the instrument panel controls.

78

1

CAUTION

n SRS airbag precautions

1-7. Safety information

If the seat belt extender has been con- nected to the driver’s seat belt buckle but the seat belt extender has not also been fastened to the latch plate of the driver’s seat belt, the SRS driver’s air- bag system will judge that the driver is wearing the seat belt even though the seat belt has not been connected. In this case, the driver’s airbag may not activate correctly in a collision, resulting in death or serious injury in the event of collision. Be sure to wear the seat belt with the seat belt extender.

l The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag. The front passenger seat should be as far from the air- bag as possible with the seatback adjusted, so the front passenger sits upright. Improperly seated and/or restrained infants and children can be killed or seriously injured by a deploying airbag. An infant or child who is too small to use a seat belt should be properly secured using a child restraint sys- tem. Toyota strongly recommends that all infants and children be placed in the rear seats of the vehicle and properly restrained. The rear seats are the safest for infants and children. (→P. 88)

79

1-7. Safety information

CAUTION

n SRS airbag precautions

80

l Do not sit on the edge of the seat or

lean against the dashboard.

l Do not allow a child to stand in front of the SRS front passenger airbag unit or sit on the knees of a front passenger.

l Do not drive the vehicle while the driver or passenger has items resting on their knees.

l Vehicles with side airbags and curtain shield airbags: Do not lean against the door, the roof side rail or the front, side and rear pillars.

l Vehicles with side airbags and curtain shield airbags: Do not allow anyone to kneel on the passenger seat toward the door or put their head or hands outside the vehicle.

1

CAUTION

n SRS airbag precautions

1-7. Safety information

l Do not attach anything to or lean any- thing against areas such as the dash- board or steering wheel pad. These items can become projectiles when SRS driver and front passenger airbags deploy.

l Vehicles with side airbags and curtain shield airbags: Do not attach anything to areas such as the door, windshield glass, side door glass, front and rear pillars, roof side rail or assist grip.

l Vehicles with side airbags and curtain shield airbags: Do not hang coat hang- ers or other hard objects on the coat hooks. All of these items could become projectiles and seriously injure or kill you, should the SRS curtain shield air- bag deploy.

l Vehicles with side airbags: Do not use seat accessories which cover the parts where the SRS side airbags inflate as they may interfere with infla- tion of the airbags.

l Do not strike or apply significant levels of force to the area of the SRS air-

bag components shown on P. 72. Doing so can cause the SRS airbags to malfunction.

l Do not touch any of the component parts immediately after the SRS air-

bags have deployed (inflated) as they may be hot. If breathing becomes difficult after the SRS airbag has deployed, open a door or window to allow fresh air in, or leave the vehicle if it is safe to do so. Wash off any residue as soon as possible to prevent skin irritation.

81

1-7. Safety information

CAUTION

n SRS airbag precautions

l Vehicles with curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad and front and rear pillar gar- nishes, are damaged or cracked, have them replaced by your Toyota dealer.

l Vehicles without curtain shield airbags: If the areas where the SRS airbags are stored, such as the steering wheel pad are damaged or cracked, have them replaced by your Toyota dealer.

n Modification and disposal of SRS airbag system components

Do not dispose of your vehicle or perform any of the following modifications without consulting your Toyota dealer. The SRS airbags may malfunction or deploy (inflate) accidentally, causing death or serious injury. l Repairs, modifications, removal or replacement of the steering wheel, instrument panel, dashboard, seats or seat upholstery, front, side and rear pillars or roof side rail.

Installation, removal, disassembly and repair of the SRS airbags.

l Repairs or modifications of the front fender, front bumper, or side of the

occupant compartment. Installation of snow plows, winches, etc. to the front grille (bull bars, kan- garoo bar etc.).

l Modifications to the vehicle’s suspension system.

Installation of electronic devices such as mobile two-way radios or CD players.

l Modifications to your vehicle for a person with a physical disability.

82

1-7. Safety information Front passenger occupant classification system

Your vehicle is equipped with a front passenger occupant classifica- tion system. This system detects the conditions of the front passen- ger seat and activates or deactivates the devices for front passenger.

SRS warning light Front passenger’s seat belt reminder light AIR BAG ON indicator light AIR BAG OFF indicator light

83

1-7. Safety information

Condition and operation in the front passenger occupant classification system n Adult*1

Indicator/ warning light

Devices

AIR BAG ON and AIR BAG OFF indicator

lights

SRS warning light

Front passenger’s seat belt reminder light

Front passenger airbag

Side airbag on the front passenger seat

Curtain shield airbag in the front passenger

side

Front passenger’s seat belt pretensioner

AIR BAG ON

Off

Flashing*2

Activated

n Child*3 or child restraint system*4

Indicator/ warning light

Devices

AIR BAG ON and AIR BAG OFF indicator

lights

SRS warning light

Front passenger’s seat belt reminder light

Front passenger airbag

Side airbag on the front passenger seat

Curtain shield airbag in the front passenger

side

Front passenger’s seat belt pretensioner

AIR BAG OFF*5
Off

Flashing*2
Deactivated

Activated

n Unoccupied

Indicator/ warning light

AIR BAG ON and AIR BAG OFF indicator

lights

SRS warning light

Front passenger’s seat belt reminder light

Not illuminated

Off

Front passenger airbag

Deactivated

Side airbag on the front passenger seat

Devices

Curtain shield airbag in the front passenger

side

Activated

Front passenger’s seat belt pretensioner

Deactivated

84

1-7. Safety information

n There is a malfunction in the system

Indicator/ warning light

AIR BAG ON and AIR BAG OFF indicator

lights

SRS warning light

Front passenger’s seat belt reminder light

AIR BAG

OFF On Off

Devices

Front passenger airbag

Deactivated

Side airbag on the front passenger seat

Curtain shield airbag in the front passenger

side

Front passenger’s seat belt pretensioner

Activated

*1:The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may rec- ognize him/her as a child depending on his/her physique and pos- ture.

*2:In the event the front passenger does not wear a seat belt. *3:When a larger child who has outgrown a child restraint system sits in the front passenger seat, the system may recognize him/her as an adult depending on his/her physique or posture.

*4:Never install a rear-facing child restraint system on the front pas- senger seat. A forward-facing child restraint system should only be installed on the front passenger seat when it is unavoidable. (→P. 88)

*5:In case the indicator is not illuminated, consult this manual as for

installing the child restraint system properly. (→P. 92)

85

1-7. Safety information

CAUTION

n Front passenger occupant classification system precautions

Observe the following precautions regarding front passenger occupant clas- sification system. Failure to do so may cause death or serious injury. l Wear the seat belt properly. l Make sure the front passenger’s seat belt tab has not been left inserted

into the buckle before someone sits in the front passenger seat.

l Make sure the AIR BAG OFF indicator light is not illuminated when using the seat belt extender for the front passenger seat. If the AIR BAG OFF indicator light is illuminated, disconnect the extender tongue from the seat belt buckle, then reconnect the seat belt. Reconnect the seat belt extender after making sure the AIR BAG ON indicator light is illuminated. If you use the seat belt extender while the AIR BAG OFF indicator light is illuminated, the front passenger airbag and side airbag on the front passenger side may not activate correctly, which could cause death or serious injury in the event of collision.

l Do not apply a heavy load to the front passenger seat or equipment. l Do not put weight on the front passenger seat by putting your hands or

feet on the front passenger seat seatback from the rear passenger seat.

l Do not let a rear passenger lift the front passenger seat with their feet or

press on the seatback with their legs.

l Do not put objects under the front passenger seat. l Do not recline the front passenger seatback so far that it touches a rear seat. This may cause the AIR BAG OFF indicator light to be illuminated, which indicates that the passenger’s airbags will not deploy in the event of a severe accident. If the seatback touches the rear seat, return the seat- back to a position where it does not touch the rear seat. Keep the front passenger seatback as upright as possible when the vehicle is moving. Reclining the seatback excessively may lessen the effectiveness of the seat belt system.

86

1

1-7. Safety information

CAUTION

n Front passenger occupant classification system precautions

If an adult sits in the front passenger seat, the AIR BAG ON indicator light is illuminated. If the AIR BAG OFF indicator is illuminated, ask the passen- ger to sit up straight, well back in the seat, feet on the floor, and with the seat belt worn correctly. If the AIR BAG OFF indicator still remain illumi- nated, either ask the passenger to move to the rear seat, or if that is not possible, move the front passenger seat fully rearward.

l When it is unavoidable to install the forward-facing child restraint system on the front passenger seat, install the child restraint system on the front passenger seat in the proper order. (→P. 92)

l Do not modify or remove the front seats. l Do not kick the front passenger seat or subject it to severe impact. Other- wise, the SRS warning light may come on to indicate a malfunction of the detection system. In this case, contact your Toyota dealer immediately.

l Child restraint systems installed on the rear seat should not contact the

front seatbacks.

87

1-7. Safety information Child restraint systems

A child restraint system for a small child or baby must itself be prop- erly restrained on the seat with the lap portion of the lap/shoulder belt. The laws of all 50 states of the U.S.A. and Canada now require the use of child restraint systems.

Points to remember

Studies have shown that installing a child restraint on a rear seat is much safer than installing one to the front passenger seat. l Choose a child restraint system that suits your vehicle and is

appropriate to the age and size of the child.

l For installation details, follow the instructions provided with the

child restraint system. General installation instructions are provided in this manual. (→P. 92)

Types of child restraints

Child restraint systems are classified into the following 3 types according to the age and size of the child.

Rear facing — Infant seat/convertible seat

88

Forward facing — Convertible seat

1-7. Safety information

Booster seat

n Selecting an appropriate child restraint system

l Use a child restraint system appropriate for the child until the child

becomes large enough to properly wear the vehicle’s seat belts. If a child is too large for a child restraint system, sit the child on a rear seat and use the vehicle’s seat belt. (→P. 44)

89

1-7. Safety information

CAUTION

n Child restraint precautions

l For effective protection in automobile accidents and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child. Holding a child in your arms is not a substitute for a child restraint system. In an accident, the child can be crushed against the windshield, or between you and the vehicle’s interior. l Toyota strongly urges the use of a proper child restraint system that con- forms to the size of the child, installed on the rear seat. According to acci- dent statistics, the child is safer when properly restrained in the rear seat than in the front seat.

l Never install a rear-facing child restraint system on the front passenger seat even if AIR BAG OFF indicator light is illuminated. In the event of an accident, the force of the rapid inflation of the front passenger airbag can cause death or serious injury to the child if the rear-facing child restraint system is installed on the front passenger seat.

l A forward-facing child restraint system may be installed on the front pas- senger seat only when it is unavoidable. A child restraint system that requires a top tether strap should not be used in the front passenger seat since there is no top tether strap anchor for the front passenger seat. Adjust the seatback as upright as possible and always move the seat as far back as possible even if the AIR BAG OFF indicator light is illuminated, because the front passenger airbag could inflate with considerable speed and force. Otherwise, the child may be killed or seriously injured.

l Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat. If installing a child restraint system with the seat belt extender connected to the seat belt, the seat belt will not securely hold the child restraint system, which could cause death or seri- ous injury to the child or other passengers in the event of emergency brak- ing, sudden swerving or an accident.

l Vehicles with side airbags and curtain shield airbags: Do not allow the child to lean his/her head or any part of his/her body against the door or the area of the seat, front and rear pillars or roof side rail from which the side airbags or curtain shield airbags deploy even if the child is seated in the child restraint system. It is dangerous if the side airbags and curtain shield airbags inflate, and the impact could cause death or serious injury to the child.

90

1

1-7. Safety information

CAUTION

n Child restraint precautions

l Make sure you have complied with all installation instructions provided by the child restraint manufacturer and that the system is properly secured. If it is not secured properly, it may cause death or serious injury to the child in the event of emergency braking, sudden swerving or an accident.

n Child restraint lock function belt precaution

Do not allow children to play with the child restraint lock function belt. If the belt becomes twisted around a child’s neck, it will not be possible to pull the belt out leading to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.

n When the child restraint system is not in use

l Keep the child restraint system properly secured on the seat even if it is not in use. Do not store the restraint unsecured in the passenger compart- ment. If it is necessary to detach the child restraint system, remove it from the vehicle or store it securely in the trunk. This will prevent it from injuring passengers in the event of emergency braking, sudden swerving or an accident.

91

1-7. Safety information Installing child restraints

Follow the child restraint system manufacturer’s instructions. Firmly secure child restraints to the rear seats using the LATCH anchors or a seat belt. Attach the top tether strap when installing a child restraint. The lap/shoulder belt can be used if your child restraint system is not compatible with the LATCH (Lower Anchors and Tethers for Chil- dren) system.

Child restraint LATCH anchors LATCH anchors are provided for the outside rear seats. (But- tons displaying the location of the anchors are attached to the seats.)

Seat belts equipped with a child restraint locking mecha- nism (ALR/ELR belts except driver’s seat belt) (→P. 44)

Anchor bracket (for top tether strap)

Anchor brackets are provided for all rear seats.

92

1

Installation with LATCH system

Type A

1-7. Safety information

anchors

Widen the gap between the seat cushion and seatback slightly. Latch the hooks of the the lower straps onto LATCH and tighten the lower straps. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (→P. 98)

Canada only

For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.

93

1-7. Safety information

Type B

Widen the gap between the seat cushion and seatback slightly. Latch the buckles onto the LATCH anchors. If the child restraint has a top tether strap, the top tether strap should be latched onto top the tether strap anchor. (→P. 98)

Canada only

For owners in Canada: The symbol on a child restraint system indicates the presence of a lower connector system.

Installing child restraints using a seat belt (child restraint lock function belt)

n Rear facing ⎯ Infant seat/convertible seat

Place the child seat on the rear seat facing the rear of the vehi- cle.

94

1-7. Safety information

Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted.

then allow

Fully extend the shoulder belt and to retract slightly in order to activate the ALR lock mode.

it

Lock mode allows the seat belt to retract only.

While pushing the child seat down into the rear seat, allow the shoulder belt to retract until the child seat is securely in place.

After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.

n Forward facing ⎯ Convertible seat

Run the seat belt through the child seat and insert the plate into the buckle. Make sure that the belt is not twisted.

95

1-7. Safety information

it

then allow

Fully extend the shoulder belt and to retract slightly into the ALR lock mode. Lock mode allows the seat belt to retract only.

While pushing the child seat into the rear seat, allow the shoulder belt to retract until the child seat is securely in place.

After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended. If the child restraint has a top tether strap, the top tether strap should be latched onto the top tether strap anchor. (→P. 98)

n Booster seat

Place the booster seat on the seat facing the front of the vehi- cle.

96

1-7. Safety information

Sit the child in the booster seat. Fit the seat belt to the booster seat according to the manufac- turer’s instructions and insert the plate into the buckle. Make sure that the belt is not twisted.

Check that the shoulder belt is correctly positioned over the child’s shoulder, and that the lap belt is as low as possible. (→P. 44)

Removing a child restraint installed with a seat belt

Push the buckle release button and fully retract the seat belt.

97

1-7. Safety information

Child restraint systems with a top tether strap

Pull the head restraint up while pushing the lock release button.

Open the anchor bracket cover, latch the hook onto the anchor bracket and tighten the top tether strap.

Make sure the top tether strap is securely latched.

Push the head restraint down to the lock position.

n Laws and regulations pertaining to anchorages

The LATCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819.

98

1

1-7. Safety information

CAUTION

n When installing a booster seat

Do not fully extend the shoulder belt to prevent the belt from going to ALR lock mode. (→P. 47) In ALR lock mode the belt is locked in that position and cannot be extended, which could cause injury or discomfort to the child seated in the booster seat.

n When installing a child restraint system

Follow the directions given in the child restraint system installation manual and fix the child restraint system securely in place. If the child restraint system is not correctly fixed in place, the child or other passengers may be seriously injured or even killed in the event of emer- gency braking, sudden swerving or an accident.

If the driver’s seat interferes with the child restraint system and prevents it from being attached correctly, attach the child restraint system to the right- hand rear seat.

l Adjust the front passenger seat so that it does not interfere with the child restraint system.

l Only put a forward-facing or booster child seat on the front seat when unavoidable. When installing a forward- facing or booster child seat on the front passenger seat, move the seat as far back as possible even if AIR BAG OFF indicator light is illuminated. Failing to do so may result in death or serious injury if the airbags deploy (inflate).

l When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’s shoulder. The belt should be kept away from the child’s neck, but not so that it could fall off the child’s shoulder. Failing to do so may result in death or serious injury in the event of emergency braking, sudden swerving or an accident.

99

1-7. Safety information

CAUTION

n When installing a child restraint system

l Ensure that the belt and tab are securely locked and the seat belt is not

twisted.

l Push and pull the child restraint system from side to side and forward to be

sure it is secure.

l After securing a child restraint system, never adjust the seat. l Follow all installation instructions provided by the child restraint system

manufacturer.

l When a child restraint system with a top tether strap is installed, do not install the head restraint. The head restraint may interfere with the top tether strap preventing secure installation of the child restraint system.

l Make sure to properly store the removed head restraint in a secure place

when you use the child restraint system on the rear seat.

n Do not use a seat belt extender

If a seat belt extender is used when installing a child restraint system, the seat belt will not securely hold the child restraint system, which could cause death or serious injury to the child or other passengers in the event of emer- gency braking, sudden swerving or an accident.

n To correctly attach a child restraint system to the anchors

When using the LATCH anchors, be sure that there are no foreign objects around the anchors and that the seat belt is not caught behind the child restraint. Make sure the child restraint system is securely attached, or it may cause death or serious injury to the child or other passengers in the event of emergency braking, sudden swerving or an accident.

100

2-1. Driving procedures Driving the vehicle

The following procedures should be observed to ensure safe driv- ing. n Starting the engine (→P. 112) n Driving

Automatic transmission

With the brake pedal depressed, shift the shift lever to D.

Release the parking brake.

(→P. 116) (→P. 120) Gradually release the brake pedal and gently depress the accelerator pedal to accelerate the vehicle.

Manual transmission

With the clutch pedal fully depressed, shift the shift lever to (→P. 118) 1. Release the parking brake. (→P. 120) Gradually release the clutch pedal. At the same time, gently depress the accelerator pedal to accelerate the vehicle.

n Stopping

Automatic transmission

With the shift lever in D, depress the brake pedal. If necessary, set the parking brake. When the vehicle is stopped for an extended period of time, shift the shift lever to P or N. (→P. 116)

Manual transmission

With the clutch pedal fully depressed, depress the brake pedal. If necessary, set the parking brake. When the vehicle is stopped for an extended period of time, shift the shift lever to N. (→P. 118)

102

2

2-1. Driving procedures

n Parking the vehicle

Automatic transmission

With the shift lever in D, depress the brake pedal. Set the parking brake. Shift the shift lever to P. When parking on a hill, if necessary, block the wheels. Turn the engine switch off to stop the engine. Lock the door, making sure that you have the key on your person.

(→P. 120) (→P. 116)

Manual transmission

With the clutch pedal fully depressed, depress the brake pedal. (→P. 120) Set the parking brake. (→P. 118) Shift the shift lever to N. When parking on a hill, shift the shift lever to 1 or R. If necessary, block the wheels. Turn the engine switch off to stop the engine. Lock the door, making sure that you have the key on your person.

Starting on a steep uphill

Automatic transmission

With the brake pedal depressed, firmly set the parking brake and shift the shift lever to D. Gently depress the accelerator pedal. Release the parking brake.

Manual transmission

With the parking brake firmly set and the clutch pedal fully depressed, shift the shift lever to 1.

103

2-1. Driving procedures

Lightly depress the accelerator pedal at the same time as gradually releasing the clutch pedal. Release the parking brake.

n Driving in the rain

l Drive carefully when it is raining, because visibility will be reduced, the

windows may become fogged-up, and the road will be slippery.

l Drive carefully when it starts to rain, because the road surface will be

especially slippery.

l Refrain from high speeds when driving on an expressway in the rain, because there may be a layer of water between the tires and the road surface, preventing the steering and brakes from operating properly.

n Breaking in your new Toyota

To extend the life of the vehicle, the following precautions are recommended to observe: l For the first 200 miles (300 km):

Avoid sudden stops.

l For the first 500 miles (800 km):

Do not tow a trailer.

l For the first 1000 miles (1600 km):

• Do not drive at extremely high speeds. • Avoid sudden acceleration. • Do not drive continuously in the low gears. • Do not drive at a constant speed for extended periods.

n Operating your vehicle in a foreign country

Comply with the relevant vehicle registration laws and confirm the availability of the correct fuel. (→P. 341)

104

2

2-1. Driving procedures

CAUTION

n When starting the vehicle

Vehicles with an automatic transmission: Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping.

n When driving the vehicle

l Do not drive if you are unfamiliar with the location of the clutch, brake and

accelerator pedals to avoid depressing the wrong pedal. • Accidentally depressing the accelerator pedal instead of the brake pedal will result in sudden acceleration that may lead to an accident that could result in death or serious injury.

• When backing up, you may twist your body around, leading to a diffi- culty in operating the pedals. Make sure to operate the pedals properly. • Make sure to keep a correct driving posture even when moving the vehicle only slightly, allowing you to depress the brake and accelerator pedals properly.

• Depress the brake pedal using your right foot. Depressing the brake pedal using your left foot may delay response in an emergency, result- ing in an accident.

l Do not drive the vehicle over or stop the vehicle near flammable materials. The exhaust system and exhaust gases can be extremely hot. This may cause a fire if there is any flammable material nearby.

l Vehicles with an automatic transmission: Do not let the vehicle roll back- wards while the shift lever is in a driving position, or roll forward while the shift lever is in R. Doing so may cause the engine to stall or lead to poor brake and steering performance, resulting in an accident or damage to the vehicle. If the smell of exhaust is noticed inside the vehicle, open the windows and check that the trunk is closed. Large amounts of exhaust in the vehicle can cause driver drowsiness and an accident, resulting in death or a serious health hazard. Have the vehicle inspected by your Toyota dealer immedi- ately.

105

2-1. Driving procedures

CAUTION

n When driving the vehicle

l Do not under any circumstances shift the shift lever to P, R or N (automatic

transmission) or R (manual transmission) while the vehicle is moving. Doing so can cause significant damage to the transmission system and may result in a loss of vehicle control.

l Do not shift the shift lever to N while the vehicle is moving.

Doing so may cause the engine brake to not operate properly and lead to an accident.

l Do not turn the engine off while driving.

The power steering and brake booster systems will not operate properly if the engine is not running.

l Use engine braking (downshift) to maintain a safe speed when driving

down a steep hill. Using the brakes continuously may cause the brakes to overheat and lose effectiveness. (→P. 116,118)

l When stopped on an inclined surface, use the brake pedal and parking brake to prevent the vehicle from rolling backward or forward and causing an accident.

l Do not adjust the position of the steering wheel, the seat, or the inside or

outside rear view mirrors while driving. Doing so may result in a loss of vehicle control that can cause accidents that may result in death or serious injury.

l Always check that all passengers’ arms, heads or other parts of their bod- ies are not outside the vehicle, as this may result in death or serious injury. l Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do not drive over 85 mph (140 km/h) unless your vehicle has high- speed capability tires. Driving over 85 mph (140 km/h) may result in tire failure, loss of control and possible injury. Be sure to consult a tire dealer to determine whether the tires on your vehicle are high-speed capability tires or not before driving at such speeds. n When driving on slippery road surfaces

l Sudden braking, acceleration and steering may cause tire slippage and

reduce your ability to control the vehicle, resulting in an accident.

106

2-1. Driving procedures

CAUTION

n When driving on slippery road surfaces

l Sudden changes in engine speed, such as engine braking caused by up- shifting or down-shifting, may cause the vehicle to skid, resulting in an accident.

l After driving through a puddle, lightly depress the brake pedal to make sure that the brakes are functioning properly. Wet brake pads may prevent the brakes from functioning properly. If the brakes on only one side are wet and not functioning properly, steering control may be affected, resulting in an accident.

n When shifting the shift lever

Vehicles with an automatic transmission: Be careful not to shift the shift lever with the accelerator pedal depressed. This may lead to unexpected rapid acceleration of the vehicle that may cause an accident and result in death or serious injury.