OVERVIEW
Fuel tank door release and cap
Driver seat
Pull up
Hang
Turn
NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “
” indicator may illuminate.
Keyless entry (if equipped) Locking operation
Unlocking operation
Push ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 30 seconds of unlocking, all doors will relock for safety.
Push
Panic button
Light control-Instrument panel
Push and hold
Brightness control
Hood release
Pull
Pull up latch and raise hood
Engine maintenance
Windshield washer fluid tank Engine oil filler cap Engine oil level dipstick Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance. Please refer to the “Warranty Maintenance Guide.”
FEATURES/OPERATIONS
Automatic Transmission (if equipped)
Park*
Reverse
Neutral
Drive
Third gear
Second gear
First gear
* The engine switch must be “ON” and the brake pedal depressed to shift
from Park.
Downshifting increases power going uphill, or provides engine braking downhill. For best fuel economy during normal driving conditions, always drive with the shift lever in the “D” position.
Tilt steering wheel
Lock release lever
Angle
Hold wheel, push lever down, set angle and return lever. NOTE: Do not attempt to adjust while the vehicle is in motion.
Trunk release
Driver seat
Pull up
Parking brake Set
Pull
Release
(2) Push
(3) Lower
(1) Pull slightly
Windows-Power (if equipped) Driver side
Window lock switch
Up
Down
Window operation Automatic down operation (driver side only) Push the switch completely down and release to fully open. To stop window at any point, lightly pull the switch up. Window lock switch Deactivates all passenger windows. Driver’s window remains operable.
Seat adjustments-Front
Seat position (forward/backward) Height crank (driver side only) Seatback angle
FEATURES/OPERATIONS
Seat adjustments-Rear (fold-down type) Before folding
(1) Push
(2) Remove
Fold
(1)
(2)
(3)
To fold down the rear seatback (1) Slide the seatback security lock to the right unlock position from the
(4)
trunk area.
(2) Lower the seat head restraints. (3) Pull the lock release knob up. (4) Fold the seatback down.
Refer to the Owner’s Manual for more details.
Seats-Head restraints Front
Rear
Lock release button
Lock release button
10
Lights & turn signals Headlights
Headlights Parking lights
Low beam
High beam flasher
High beam
Turn signals
Right turn
Lane change
Lane change
Left turn
Front fog lights (if equipped)
Turn
Front fog lights turn on only when the headlights are on low beam.
Windshield wipers & washers With interval adjuster Adjust frequency*
Single wipe
Without interval adjuster
Interval wipe Slow
Pull to wash and wipe
Fast
* Intermittent windshield wiper
frequency adjustment Rotate to increase/decrease wipe frequency.
Pull to wash and wipe
11
Single wipe
Interval wipe
Slow
Fast
FEATURES/OPERATIONS
Audio (if equipped)
Push to turn ON/OFF
Eject CD
Push to adjust tone & balance
Seek station/ CD track select
Mode
Push to skip up /down folder Mode
Station/CD track scan
Preset buttons - functions in other modes indicated beside number.
View CD text
CD player To scan tracks on a disc Push “SCAN.” Push again to hold selection. Radio To preset stations Tune in the desired station and hold down a preset button (1-6) until you hear a beep. Push desired preset button (1-6) to select. To scan stations Push “SCAN.” Push and hold to scan preset stations. Push again to hold selection. AUX port (if equipped)
By inserting a mini plug of a commercially available component into the AUX port, you can listen to music from a portable audio device through the vehicle’s speaker system while in AUX mode. NOTE: An iPod®-dedicated port is standard on all sedans with an S-Package.
12
Air Conditioning/Heating
Recirculate cabin air (fresh air when OFF) Fan speed Air Conditioning ON/OFF Airflow vent In “ Temperature selector Rear defogger
” mode, use fresh air to reduce window fogging.
Power outlet
Designed for 12V car accessories. Key must be in the “ACC” or “ON” position to be used.
13
FEATURES/OPERATIONS
Cruise control (if equipped) Turning system ON/OFF
Functions
Cancel1
Resume2/Increase speed
System ON/OFF
Set/Decrease speed
1 The set speed may also be cancelled by depressing the brake pedal or the clutch pedal (Manual Transmission). 2 Unless vehicle speed drops below 10 mph, the set speed may be resumed
once vehicle exceeds 25 mph.
Refer to the Owner’s Manual for more details.
VSC OFF button
VSC OFF button
The VSC OFF button is used to switch between modes related to the TRAC and VSC.
Refer to Section 2-4 of the Owner’s Manual for more information.
14
Clock
Clock adjust button
(1) Push and hold the CLOCK button to enter adjustment mode. (2) Press CLOCK button to adjust hours. (3) Wait five seconds to adjust the minutes. (4) Wait another five seconds for process to complete.
Cup holders Front
Rear Rear console box
Rear seat armrest (if equipped)
Bottle holders-Front seat
15
SAFETY AND EMERGENCY FEATURES
Door locks-Power (if equipped)
Lock
Unlock
Doors-Child safety locks Rear door
Moving the lever to “LOCK” will allow the door to be opened only from the outside. Seat belts
Take up slack
Too high
Keep as low on hips as possible
If belt is fully extended, then retracted even slightly, it cannot be re-extended beyond that point, unless fully retracted again. This feature is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint system, refer to the Owner’s Manual.
Tire Pressure Monitoring (warning) System If tire pressure becomes critically low on any of the tires (excluding the spare), “ ” indicator will illuminate. Correctly adjusting tire inflation will turn off the light after a few minutes. If the light does not turn off, have the system checked by your Toyota dealer. Refer to the Owner’s Manual for more details.
16
1-1. Key information Keys
The following keys are provided with the vehicle.
Vehicles without engine immobilizer system (type A)
Master keys (with wireless remote control function) Operating the wireless remote control function (→P. 26) Valet key Key number plate
Vehicles without engine immobilizer system (type B)
Master keys Valet key Key number plate
Vehicles with engine immobilizer system (type A)
Master keys (with wireless remote control function) Operating the wireless remote control function (→P. 26) Valet key Key number plate
24
1-1. Key information
Vehicles with engine immobilizer system (type B) Master keys Valet key Key number plate
n When required to leave a key to the vehicle with a parking attendant
Turn the luggage security system on. (→P. 34) Carry the master key for your own use and leave the valet key only with the attendant.
n Key number plate
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 325)
n When riding in an aircraft
When bringing a wireless remote control key onto an aircraft, make sure you do not press any buttons on the wireless remote control key while inside the aircraft cabin. If you are carrying a wireless remote control key in your bag etc, ensure that the buttons are not likely to be pressed accidentally. Press- ing a button may cause the wireless remote control key to emit radio waves that could interfere with the operation of the aircraft.
NOTICE
n To prevent key damage (vehicles with engine immobilizer system)
l Do not subject the keys to strong shocks, expose them to high tempera-
tures by placing them in direct sunlight, or get them wet.
l Do not expose the keys to electromagnetic materials or attach any mate-
rial that blocks electromagnetic waves to the key surface.
25
1-2. Opening, closing and locking the doors Wireless remote control∗
The wireless remote control can be used to lock/unlock the vehicle from outside the vehicle.
Locks all doors Sounds alarm (push and hold) Unlocks all doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors.
n Operation signals
The emergency flashers flash to indicate that the doors have been locked/ unlocked. (Locked: Once; Unlocked: Twice)
n Panic mode
is pushed for longer than about When 1 second, an alarm will sound for about 60 seconds and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, push any button on the wireless remote control.
n Key battery depletion
The standard battery life is 1 to 2 years. (The battery becomes depleted even if the key is not used.) If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 265)
n Security feature
If a door is not opened within approximately 30 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
∗: If equipped
26
1-2. Opening, closing and locking the doors
n Conditions affecting operation
The wireless remote control function may not operate normally in the follow- ing situations. l Near a TV tower, radio station, electric power plant, airport or other facil-
ity that generates strong radio waves
l When carrying a portable radio, cellular phone or other wireless commu-
nication device
l When multiple wireless keys are in the vicinity l When the wireless key has come into contact with, or is covered by a
metallic object
l When a wireless key (that emits radio waves) is being used nearby l When the wireless key has been left near an electrical appliance such as
a personal computer
n Customization that can be configured at Toyota dealer
Settings (e.g. wireless remote control system) can be changed. (Customiz- able features →P. 365)
n Certification for wireless remote control
For vehicles sold in U.S.A. FCC ID:MOZB41TG FCC ID:MOZB21RG
NOTE: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
NOTE: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
27
1-2. Opening, closing and locking the doors Doors
The vehicle can be locked/unlocked using the wireless remote con- trol, key or door lock switch. n Wireless remote control (if equipped)
→P. 26
n Key
Vehicles with power door lock
Locks all doors Unlocks all doors Turning the key a single time in the driver’s door unlocks the driver’s door, and turning the key again unlocks the other doors.
28
1-2. Opening, closing and locking the doors
Vehicles without power door lock
Locks the door Unlocks the door
29
1-2. Opening, closing and locking the doors
n Door lock switch (if equipped)
Driver’s door lock switch
Unlocks all doors Locks all doors
Passenger’s door lock switch
Locks all doors Unlocks all doors
n Inside door lock button
Locks the door Unlocks the door Pulling the inside handle can open the front door even if the lock button is in the lock posi- tion.
30
1
1-2. Opening, closing and locking the doors
Locking the front doors from the outside without a key
Move the inside door lock button to the lock position. Close the door.
Vehicles with power door lock The door cannot be locked if the driver’s door is open and the key is in the engine switch.
Rear door child-protector lock
The door cannot be opened from inside the vehicle when the locks are set.
These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
n Key reminder buzzer
A buzzer sounds if the driver’s door is opened, while the engine switch is in the ACC or LOCK position to remind you to remove the key.
n Customization that can be configured at Toyota dealer
Settings (Customizable features →P. 365)
(e.g. unlocking
function using a key) can be changed.
31
1-2. Opening, closing and locking the doors
CAUTION
n To prevent an accident
Observe the following precautions while driving the vehicle. Failing to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. l Always use a seat belt. l Always lock all doors. l Ensure that all doors are properly closed. l Do not pull the inside handle of the doors while driving.
The doors may be opened and the passengers are thrown out of the vehi- cle and it may result in serious injury or death. Be especially careful for the front doors, as the doors may be opened even if the inside lock buttons are in locked position.
l Set the rear door child protector locks when children are seated in the rear
seat.
32
1-2. Opening, closing and locking the doors Trunk
The trunk can be opened using the key or trunk opener. n Key
Turn the master key clockwise to release the trunk lid.
n Trunk opener
Release the trunk lid.
33
1-2. Opening, closing and locking the doors
Luggage security system
To protect luggage stored in the trunk against theft, do the following procedures.
Vehicles with split rear seats: Move the security lock levers to lock the rear seatbacks.
Turn the master key counter- clockwise to trunk opener feature.
lock
the
n Internal trunk release lever
The trunk lid can be opened by pulling up on the glow-in-the-dark lever located on the inside of trunk lid. The lever will continue to glow for some time after the trunk lid is closed.
n Which key to the vehicle is to leave with a parking attendant after the
luggage security system is set
→P. 25
34
1
1-2. Opening, closing and locking the doors
CAUTION
n Caution while driving
l Keep the trunk lid closed while driving.
If the trunk lid is left open, it may hit near-by objects while driving or lug- gage in the trunk may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. Make sure to close the trunk lid before driving.
l Before driving the vehicle, make sure that the trunk lid is fully closed. If the trunk lid is not fully closed, it may open unexpectedly while driving, caus- ing an accident.
l Never let anyone sit in the trunk. In the event of sudden braking or a colli-
sion, they are susceptible to death or serious injury.
n When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. l Do not allow children to enter the trunk.
If a child is accidentally locked in the trunk, they could have heat exhaus- tion or suffocate.
l Do not allow a child to open or close the trunk lid.
Doing so may cause the trunk lid to operate unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing trunk lid.
35
1-2. Opening, closing and locking the doors
CAUTION
n Using the trunk
Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. l Remove any heavy loads, such as snow and ice, from the trunk lid before opening it. Failure to do so may cause the trunk lid to fall closed again after it is opened.
l When opening or closing the trunk lid, thoroughly check to make sure the
surrounding area is safe. If anyone is in the vicinity, make sure they are safe and let them know that the trunk is about to open or close.
l Use caution when opening or closing the trunk lid in windy weather as it
may move abruptly in strong wind.
l The trunk lid may fall if it is not opened fully. It is more difficult to open or close the trunk lid on an incline than on a level surface, so beware of the trunk lid unexpectedly opening or closing by itself. Make sure that the trunk lid is fully open and secure before using the trunk.
l When closing the trunk lid, take extra care to prevent your fingers etc. from being caught.
l When closing the trunk lid, make sure to press it lightly on its outer surface. If the trunk handle is used to fully close the trunk lid, it may result in hands or arms being caught.
l Do not attach any accessories other than genuine Toyota parts to the trunk lid. Such additional weight on the trunk lid may cause the lid to fall closed again after it is opened.
36
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats
Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever (driver’s side only)
CAUTION
n Seat adjustment
l Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
l After adjusting the seat, make sure that the seat is locked in position.
37
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats (split rear seats only)
The seatbacks of the rear seats can be folded down.
Insert the key into the hole on the center seat belt buckle to release tab (with hooked end), and allow the belt to retract.
Remove the seat belts from the seat belt guides.
Check that the security lock levers in the unlock position.
trunk are
in
38
1-3. Adjustable components (seats, mirrors, steering wheel)
Lower each head restraints while pushing the lock release button.
n Returning rear seatbacks
Fold the seatbacks down while pulling the seatback lock release knobs.
Tilt the rear seatback up until it locks, making sure that you hold the seat belt to prevent it from getting caught between the seatback and the inner side of the vehicle.
Make sure the shoulder belt passes through the guide and the seat belt is in the position before folding down the seat when returning the seatback up.
39
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
n After returning the seatback to the upright position
Observe the following precautions. Failure to do so may result in death or serious injury.
l Make sure that the seatback is securely locked in position by lightly rocking it back and forth. If the seatback is not securely locked, the red marking will be visible on the seatback lock release knob. Make sure that the red marking is not visible.
l Check that the seat belts are not twisted or caught under the seat.
40
1
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints
Head restraints are provided for all seats.
Front seats
Vertical adjustment
Up Pull the head restraints up. Down Push the head restraints down while pushing the lock release button.
Vertical adjustment
Up Pull the head restraints up. Down Push the head restraints down while pushing the lock release button.
Pull the head restraint up while pushing the lock release button.
Lock release button Rear seats
Lock release button
n Removing the head restraints
Front seats
41
1-3. Adjustable components (seats, mirrors, steering wheel)
Rear seats
Pull the head restraint up while pushing the lock release button.
n Installing the head restraints
Front seats
Rear seats
Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
n Adjusting the height of the head restraints
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
42
1
1-3. Adjustable components (seats, mirrors, steering wheel)
n Adjusting the rear seat head restraints
Always raise the head restraint one level from the stowed position when using.
CAUTION
n Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. l Use the head restraints designed for each respective seat. l Adjust the head restraints to the correct position at all times. l After adjusting the head restraints, push down on them and make sure
they are locked in position.
l Do not drive with the head restraints removed.
43
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts
Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. n Correct use of the seat belts
l Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.
l Position the lap belt as low
as possible over the hips.
l Adjust the position of the seatback. Sit up straight and well back in the seat. l Do not twist the seat belt.
n Fastening and releasing the seat belt
Fastening the belt
Push the tab into the buckle until a clicking sound is heard.
44
1-3. Adjustable components (seats, mirrors, steering wheel)
Releasing the belt
Press the release button.
n Adjusting the height of the belt (front seats)
Down Pull the lock release knob and slide the height adjuster down. Up Move the height adjuster up as needed until you hear a click.
Rear center seat belt
The rear center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation.
Make sure that the buckle is securely latched for ready use of the center seat belt.
the
the
tab with
Matches hooked end Matches the tab with the con- cave end
45
1-3. Adjustable components (seats, mirrors, steering wheel)
n Release method
The belt can be completely released when not required, such as when folding down the rear seat.
To release the hooked end tab, insert the vehicle’s key into the hole on the buckle.
Seat belt pretensioners (front seats)
The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision.
The pretensioner may not acti- vate in the event of a minor frontal impact, a side impact or a rear impact.
46
1-3. Adjustable components (seats, mirrors, steering wheel)
n Emergency locking retractor (ELR)
The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
n Automatic locking retractor (ALR)
When a passenger’s shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (→P. 92)
n Pregnant women
Obtain medical advice and wear the seat belt in the proper way. (→P. 44) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision.
n People suffering illness
Obtain medical advice and wear the seat belt in the proper way.
47
1-3. Adjustable components (seats, mirrors, steering wheel)
n Child seat belt usage
The seat belts of your vehicle were principally designed for persons of adult size. l Use a child restraint system appropriate for the child, until the child
become large enough to properly wear the vehicle’s seat belt. (→P. 88)
l When the child becomes large enough to properly wear the vehicle’s
seat belt, follow the instructions on P. 44 regarding seat belt usage.
n Replacing the belt after the pretensioner has been activated
If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent colli- sions.
n Seat belt extender
If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.
they are not
CAUTION
Observe the following precautions to reduce the risk of injury in the event of emergency braking, sudden swerving or an accident. Failing to do so may cause death or severe injury. n Wearing a seat belt
l Ensure that all passengers wear a seat belt. l Always wear a seat belt properly. l Each seat belt should be used by one person only. Do not use a seat belt
for more than one person at once, including children.
l Toyota recommends that children be seated in the rear seat and always
use a seat belt and/or an appropriate child restraint system.
l Do not recline the seat any more than necessary to achieve a proper seat- ing position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.
48
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
n Wearing a seat belt
l Do not wear the shoulder belt under your arm. l Always wear your seat belt low and snug across your hips.
n Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in the event of emergency brak- ing, sudden swerving or an accident. (→P. 45)
n Seat belt pretensioners
l Do not place anything, such as a cushion, on the front passenger’s seat.
Doing so will disperse the passenger’s weight, which prevents the sensor from detecting the passenger’s weight properly. As a result, the seat belt pretensioner for the front passenger’s seat may not activate in the event of a collision. If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.
n Seat belt damage and wear
l Do not damage the seat belts by allowing the belt, plate, or buckle to be
jammed in the door. Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belt cannot protect an occupant from death or serious injury.
l Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact your Toyota dealer.
l Replace the seat assembly, including the belts, if your vehicle has been
involved in a serious accident, even if there is no obvious damage.
l Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.
49
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
n Child restraint lock function belt precaution
Do not allow children to play with the child restraint lock function belt. If the belt becomes twisted around a child’s neck, it will not be possible to pull the belt out leading to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.
n When using the rear center seat belt
Do not use the rear center seat belt with either buckle released. Fastening only one of the buckles may result in death or serious injury in case of sudden braking or a collision.
n Using a seat belt extender
l Do not wear the seat belt extender, if you can fasten the seat belt without
the extender.
l Do not use the seat belt extender when installing a child restraint system, because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
l The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.
NOTICE
n When using a seat belt extender
When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.
50
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel
The steering wheel can be adjusted to a comfortable position.
Hold the steering wheel and press the lever down.
Adjust to the ideal position by moving the steering wheel vertically.
After adjustment, pull the lever up the steering wheel.
to secure
CAUTION
n Caution while driving
Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident may occur resulting in death or serious injury.
n After adjusting the steering wheel
Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.
51
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by using the following functions.
Normal position Anti-glare position
Adjusting the height of rear view mirror
Adjust the height of the rear view mirror by moving it up and down.
52
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
n Caution while driving
Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
53
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors
Mirror angle can be adjusted using the switch or lever.
Power-adjustable type
Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.
Manually adjustable type
Adjust the mirror up, down, in or out using the lever.
54
1-3. Adjustable components (seats, mirrors, steering wheel)
Folding back the mirrors
Push backward to fold the mir- rors.
n Mirror operating conditions (with power-adjustable type only)
The engine switch is in the ACC or ON position.
CAUTION
n When driving the vehicle
Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. l Do not adjust the mirrors while driving. l Do not drive with the mirrors folded back. l Both the driver and passenger side mirrors must be extended and properly
adjusted before driving.
55
1-3. Adjustable components (seats, mirrors, steering wheel)
NOTICE
n If ice should jam the mirror
Do not operate the control or scrape the mirror face. Use a spray de-icer to free the mirror.
56
1
1-4. Opening and closing the windows Power windows∗
The power windows can be opened/closed using the following switches.
Driver’s power window switches
Closing Opening One-touch opening (driver’s window only)*
*: Pressing
the switch
the opposite direction will stop win- dow travel partway.
in
Front passenger’s power window switch
Closing Opening
Rear passenger’s power window switch
Closing Opening
∗: If equipped
57
1-4. Opening and closing the windows
Lock switch
Press the switch down to lock passenger window switches.
Use this switch to prevent chil- dren from accidentally opening or closing a passenger window.
n The power windows can be operated when
The engine switch is in the ON position.
n Operating the power windows after turning the engine switch off
(driver’s window only) The power windows can be operated for approximately 45 seconds even after the engine switch is turned off. They cannot, however, be operated once either front door is opened.
CAUTION
n Closing the windows
Observe the following precautions. Failing to do so may result in death or serious injury. l Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
l Do not allow children to operate the power windows.
Closing a power window on someone can cause serious injury, and in some instances, even death.
58
1-5. Refueling Opening the fuel tank cap
Perform the following steps to open the fuel tank cap. n Before refueling the vehicle
Turn the engine switch off and ensure that all the doors and win- dows are closed.
n Opening the fuel tank cap
Open the fuel filler door.
Turn the fuel tank cap slowly to open.
59
1-5. Refueling
Closing the fuel tank cap
Hang the fuel tank cap on the back of the fuel filler door.
When replacing the fuel tank cap, turn it until a clicking sound is heard.
After releasing your hand, the cap will turn slightly to the opposite direction.
n Fuel types
Unleaded gasoline. (Octane Rating 87 [Research Octane Number 91] or higher)
n Fuel tank capacity
Approximately 11.1 gal. (42.0 L, 9.2 Imp.gal.)
60
1
1-5. Refueling
CAUTION
n Refueling the vehicle
Observe the following precautions while refueling the vehicle. Failure to do so, may result in death or serious injury. l Touch the vehicle or some other metal surface to discharge any static
electricity. Sparks resulting from discharging static electricity may cause the fuel vapors to ignite.
l Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out of the filler neck and cause injury.
l Do not allow anyone that has not discharged static electricity from their
bodies to come close to an open fuel tank.
l Do not inhale vaporized fuel.
Fuel contains substances that are harmful if inhaled.
l Do not smoke while refueling the vehicle.
Doing so may cause the fuel to ignite and cause a fire.
l Do not return to the vehicle or touch any person or object that is statically
charged. This may cause static electricity to build up, resulting in a possible ignition hazard.
n When replacing the fuel tank cap
Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
61
1-5. Refueling
NOTICE
n Refueling
Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the exhaust systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.
62
1-6. Theft deterrent system Engine immobilizer system∗
The vehicle’s keys have built-in transponder chips that prevent the engine from starting if the key has not been previously registered in the vehicle’s on-board computer. Never leave the keys inside the vehicle when you leave the vehicle.
The indicator light flashes after the key has been removed from the engine switch to indi- cate that the system is operat- ing. The indicator light stops flash- ing after the registered key has been inserted into the engine switch to indicate that the system has been can- celed.
n System maintenance
The vehicle has a maintenance-free type engine immobilizer system.
n Conditions that may cause the system to malfunction
If the key is in contact with a metallic object If the key is in close proximity to or touching a key to the security system (key with a built-in transponder chip) of another vehicle
∗: If equipped
63
1-6. Theft deterrent system
n Certifications for the engine immobilizer system
For vehicles sold in U.S.A.
FCC ID: MOZRI-20BTY This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
For vehicles sold in Canada
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
NOTICE
n To ensure the system operates correctly
Do not modify or remove the system. If modified or removed, the proper operation of the system cannot be guaranteed.
64
1-6. Theft deterrent system Alarm (Puerto Rico)
The system sounds the alarm and flashes lights when forcible entry is detected. n Triggering of the alarm
The alarm is triggered in the following situations when the alarm is set. l A locked door or trunk is unlocked or opened in any way other than using the key (vehicles without wireless remote control) or wireless remote control door lock function (vehicles with wireless remote control). (The doors will lock again automati- cally.)
l The hood is opened. l The battery is reconnected.
n Setting the alarm system
Close the doors, trunk and hood, and lock all doors using the key (vehicles without wire- less remote control) or wire- less remote control door lock function (vehicles with wire-