Login- Download PDF Manual
-
may suddenly shut again after being opened, causing someone’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recommended.
■Back door closer (vehicles with a power back door)
It
●In the event that the back door is left slightly open, the back door closer will automatically close it to the fully closed position. takes several seconds before the back door closer begins to operate. Be careful not to catch fingers or anything else in the back door, as this may cause bone fractures or other serious injuries.
●Use caution when using the back door closer as it still operates when the
power back door system is cancelled.
■Power back door (if equipped)
Observe the following precautions when operating the power back door. Failure to do so may cause death or serious injury. ●Check the safety of the surrounding area to make sure there are no obsta-
cles or anything that could cause any of your belongings to get caught.
●If anyone is in the vicinity, make sure they are safe and let them know that
the back door is about to open or close.
●If the power back door system is turned off with the main switch while the back door is operating automatically, the automatic operation is stopped. The back door then has to be operated manually. Take extra care when on an incline, as the back door may open or close unexpectedly.
●If the operating conditions of the power back door are no longer met, a buzzer may sound and the back door may stop opening or closing. The back door then has to be operated manually. Take extra care when on an incline, as the back door may open or close abruptly.
45
1-2. Opening, closing and locking the doors
CAUTION
■Power back door (if equipped)
●On an incline, the back door may suddenly shut after it opens. Make sure
the back door is fully open and secure.
●In the following situations, the power back door may detect an abnormality and automatic operation may be stopped. In this case, the back door has to be operated manually. Take extra care when on an incline, as the back door may open or close abruptly. • When the back door contacts an obstacle • When the battery voltage suddenly drops, such as when the engine switch is turned to the ON position or the engine is started during auto- matic operation
●If a bicycle carrier or similar heavy object is attached to the back door, the power back door may not operate, causing itself to malfunction, or the back door may suddenly shut again after being opened, causing some- one’s hands, head or neck to be caught and injured. When installing an accessory part to the back door, using a genuine Toyota part is recom- mended.
■Jam protection function (vehicles with a power back door)
Observe the following precautions. Failure to do so may cause death or serious injury. ●Never use any part of your body to intentionally activate the jam protection
function.
●The jam protection function may not work if something gets caught just before the back door fully closes. Be careful not to catch fingers or any- thing else.
●The jam protection function may not work depending on the shape of the
object that is caught. Be careful not to catch fingers or anything else.
46
1
1-2. Opening, closing and locking the doors
NOTICE
■Back door damper stays
The back door is equipped with damper stays that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door damper stay, resulting in malfunction.
Damper stay rod
●Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod.
●Do not touch the damper stay rod with
gloves or other fabric items.
●Do not attach any accessories other than genuine Toyota parts to the back door.
●Do not place your hand on the damper
stay or apply lateral forces to it.
■To prevent back door closer malfunction (vehicles with a power back
door) Do not apply excessive force to the back door while the back door closer is operating.
■To prevent damage to the power back door (if equipped)
●Make sure that there is no ice between the back door and frame that would prevent movement of the back door. Operating the power back door when excessive load is present on the back door may cause a malfunc- tion.
●Do not apply excessive force to the back door while the power back door
is operating.
●Take care not to damage the sensors (installed on the right and left edges of the power back door) with a knife or other sharp object. If the sensor is disconnected, the power back door will not operate in automatic operation.
47
1-3. Adjustable components (seats, mirrors, steering wheel) Front seats
Manual seat
Passenger’s seat
Driver’s seat
Seat position adjustment lever Seatback angle adjustment lever Vertical height adjustment lever Seat cushion (front) angle adjustment knob Seat lumbar support adjustment switch
48
1-3. Adjustable components (seats, mirrors, steering wheel)
Power seat
Passenger’s seat
Driver’s seat
Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch Vertical height adjustment switch Driver’s seat leg support adjustment switch (if equipped) Seat lumbar support adjustment switch
49
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Seat adjustment
●Be careful that the seat does not hit passengers or luggage. ●Do not recline the seat more than necessary when the vehicle is in motion
to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
●Manual seat only: After adjusting the seat, make sure that the seat is
locked in position.
50
1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats
■ Second seats Separated seat
Seat position adjustment lever Seatback angle adjustment lever
51
1-3. Adjustable components (seats, mirrors, steering wheel)
Bench seat
Seat position adjustment lever* Seatback angle adjustment lever
*:The second center seat can be moved forward further than side seats.
52
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Third seats Manual seat
Seatback angle adjustment lever
53
1-3. Adjustable components (seats, mirrors, steering wheel)
Power seat
Seatback angle adjustment switch Seatback switch
folding/returning
Moving a second seat for third seat access
■ Getting in the vehicle
Pull up the lever and fold down the seatback. The seat will slide forward. Move the seat to the front-most position
54
1
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Getting out of the vehicle
Depress the release pedal and fold down the seatback. The seat will slide forward. Move the seat to the front-most position
Make sure that no passenger is seated on the second seat before depressing the release pedal.
■ After passengers have entered/exited the vehicle
Lift up the seatback and slide the seat backward until it locks.
Folding down the second seat
■ Before folding down the second seat
Adjust the head restraint to the downmost position.
Stow the rear seat belt buckle.
55
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Folding down the second seat
Separated seat
Pull the lever to unlock the seat- back and then fold the seatback down.
Bench seat
Pull the lever to unlock the seat- back and then fold the seatback down.
■ After folding down the second seat (if equipped)
Fold out the board from the seat- back.
56
1-3. Adjustable components (seats, mirrors, steering wheel)
Folding down the third seat
■ Before folding down the third seat
To release the hooked end tab, insert the key or concaved end tab into the hole on the buckle.
Retract the belt slowly when releasing and stowing the seat belt.
Stow the seat belt tabs in the cover set in the roof as shown.
57
1-3. Adjustable components (seats, mirrors, steering wheel)
Adjust the center head restraint to the downmost position.
Stow the third seat belt buckles.
58
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Folding down the third seat (manual seat)
the head
lock Pull release lever to fold the head restraint.
restraint
Pull the lever to unlock the seatback and then fold the seat- back down.
From rear door side
From back door side
59
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Folding down the third seat (power seat)
From rear door side
From back door side
Press and hold the seatback folding switch until the seatback folds down fully and the buzzer sounds.
The outside head restraints are folded automatically.
Press and hold the seatback folding switch until the seatback folds down fully and the buzzer sounds.
The outside head restraints are folded automatically.
■The power third seat can be folded down/returned when
●Turn the engine switch to the LOCK position or the shift lever is in P, with
the rear door opened. (from rear door side)
●Turn the engine switch to the LOCK position or the shift lever is in P, with
the back door opened. (from back door side)
60
1
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■When adjusting a rear seat
●Be careful that the seat does not hit passengers or luggage. ●Do not recline the seat more than necessary when the vehicle is in motion to reduce the risk of sliding under the lap belt. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident.
●Do not depress the second seat release pedal from the third seat while the
second seat is occupied.
●Be careful not to get your hands or feet caught in the seat.
■Before folding down a rear seat
Do not fold down a rear seat when there are passengers sitting in the rear seats or when there is luggage placed on/under the rear seats.
■After adjusting a seat
Observe the following precautions. Failure to do so may result in death or serious injury. ●Make sure that the seat and seatback are securely locked in position by
lightly rocking them back and forth.
●Check that the seat belts are not twisted or caught under the seat.
NOTICE
■When folding down the seats
The seat belts and buckles must be stowed. ■Second seatback board weight capacity
Do not place any object heavier than 220 lb. (100 kg) on the second seat- back board.
■Before sliding the second center seat to the most forward position
(vehicles with bench type second seat) Ensure that the cup holder on the front console box is closed.
61
1-3. Adjustable components (seats, mirrors, steering wheel) Driving position memory (driver’s seat)
Your preferred driving position (the position of the driver’s seat, steering wheel and outside rear view mirrors) can be entered into the computer’s memory and recalled with the touch of a button. Two different driving positions can be entered into memory. ■ Entering a position into memory
Check that the shift lever is set in P.
Turn the engine switch to the ON position. Adjust the driver’s seat, steering wheel, and outside rear view mirrors to the desired positions.
While pushing the SET button, push button “1” or “2” until the signal beeps.
If the selected button has already been preset, the previ- ously recorded position will be overwritten.
■ Recalling the memorized position
Check that the shift lever is set in P.
Turn the engine switch to the ON position.
Push button “1” or “2” to recall the desired position.
62
: If equipped
1-3. Adjustable components (seats, mirrors, steering wheel)
Linking driving position memory with door unlock operation
Memorized driving positions can be recalled when you unlock the driver’s door using the wireless remote control and open the driver’s door. ■ Setting the linked door unlock operation
Set the driving positions into the memory system using the “1” or “2” buttons. (P. 62) Turn the engine switch off then, close the driver’s door.
Push the “1” or “2” button and the button on the wireless remote control at the same time for about 1 second until you hear a beep.
To prevent unintended triggering of the alarm, open and close a door once after a driving position has been recorded. (If a door is not opened within 60
seconds after is pressed, the doors will be locked again and the alarm will automatically be set.) In case the alarm is triggered, immediately stop the alarm. (P. 107) ■ Canceling the linked door unlock operationClose the driver’s door with the engine switch turned off. Push the SET button and the button on the wireless remote control at the same time for about 1 second until you hear 2 beeps.
63
1-3. Adjustable components (seats, mirrors, steering wheel)
■Retained accessory power
Each memorized position (except for the tilt and telescopic steering column) can be activated within 30 seconds after the driver’s door is opened, even if the key is not in the engine switch.
■If any position memory button is pushed while the adjustments are
being made The operation will stop. To reactivate the system, push the button (“1” or “2”) again.
■If the battery is disconnected
The memorized positions must be reset because the computer’s memory is erased when the battery is disconnected.
CAUTION
■Seat adjustment caution
Take care during seat adjustment that the seat does not strike the rear pas- senger or squeeze your body against the steering wheel. If this happens, you can stop the movement by pressing another seat posi- tion memory button.
64
1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints
Head restraints are provided for all seats.
Front seats
Vertical adjustment
Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button.
Lock release button
Second center* and outside seats
Vertical adjustment
Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button. *: 8-passenger models only
Vertical adjustment
Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button.
Lock release button
Third center seat
Lock release button
65
1-3. Adjustable components (seats, mirrors, steering wheel)
Third outside seats
To use Lift up the head restraint until it locks. To fold Pull the head restraint lock release lever to fold the head restraint.
■Removing the head restraints
Front seats
Pull the head restraint up while pushing the lock release button.
Second seats
Pull the head restraint up while pushing the lock release button. 8-passenger models: The head restraint of center seat can- not be removed.
66
1-3. Adjustable components (seats, mirrors, steering wheel)
Third seats
Pull the head restraint up while pushing the lock release button.
The head restraint of outside seat can- not be removed.
■Installing the head restraints
Front seats
Second seats
Third center seat
Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.
67
1-3. Adjustable components (seats, mirrors, steering wheel)
■Adjusting the height of the head restraints (front and second outside
seats)
Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.
■Adjusting the center seat head restraint
Always raise the head restraint one level from the lowermost position when using.
CAUTION
■Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●Use the head restraints designed for each respective seat. ●Adjust the head restraints to the correct position at all times. ●After adjusting the head restraints, push down on them and make sure
they are locked in position.
●Do not drive with the head restraints removed.
68
1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts
Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts
● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.
● Position the lap belt as low
as possible over the hips.
● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.
■ Fastening and releasing the seat belt
Fastening the belt
Push the tab into the buckle until a clicking sound is heard.
69
1-3. Adjustable components (seats, mirrors, steering wheel)
■ Adjusting the height of the belt
Releasing the belt
Press the release button.
Down Up Move the height adjuster up and down as needed until you hear a click.
70
1-3. Adjustable components (seats, mirrors, steering wheel)
Third center seat belt
The third center seat belt is a 3-point type restraint with 2 buckles. Both seat belt buckles must be correctly located and securely latched for proper operation.
Make sure that the buckle is securely latched for ready use of the center seat belt.
the
the
tab with
Matches hooked end (tab “A”) Matches the tab with the con- caved end (tab “B”)
■ Release method
The belt can be completely released when not required, such as when folding down the third seat.
To release the tab “B”, push the buckle release button. To release the tab “A”, insert the key (P. 30) or tab “B” into the hole on the buckle. Retract the belt slowly when releasing and stowing the seat belt.
71
1-3. Adjustable components (seats, mirrors, steering wheel)
Stow the seat belt tabs in the cover set in the roof as shown.
■ Extracting the belt
Pull the belt out partially, and then remove the tabs from the cover.
Seat belt comfort guide (third center seat)
If the shoulder belt sits close to a person’s neck, use the seat belt comfort guide.
Pull the comfort guide from the pocket.
72
1-3. Adjustable components (seats, mirrors, steering wheel)
Slide the belt past the slot of the guide.
The elastic cord must be behind the seat belt.
Seat belt pretensioners (front seats)
The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal collision or a vehicle rollover.
The pretensioner may not acti- vate in the event of a minor frontal impact, a side impact or a rear impact.
73
1-3. Adjustable components (seats, mirrors, steering wheel)
■Emergency locking retractor (ELR)
The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.
■Automatic locking retractor (ALR)
When a passenger’s shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (P. 133)
■Pregnant women
Obtain medical advice and wear the seat belt in the proper way. (P. 69) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only a pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a collision.
■People suffering illness
Obtain medical advice and wear the seat belt in the proper way.
74
1
1-3. Adjustable components (seats, mirrors, steering wheel)
■Child seat belt usage
The seat belts of your vehicle were principally designed for persons of adult size. ●Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. (P. 129) ●When the child becomes large enough to properly wear the vehicle’s
seat belt, follow the instructions on P. 69 regarding seat belt usage.
■Replacing the belt after the pretensioner has been activated
If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent colli- sions.
■Seat belt extender
If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.
they are not
CAUTION
Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failing to do so may cause death or serious injury. ■Wearing a seat belt
●Ensure that all passengers wear a seat belt. ●Always wear a seat belt properly. ●Each seat belt should be used by one person only. Do not use a seat belt
for more than one person at once, including children.
●Toyota recommends that children be seated in the rear seat and always
use a seat belt and/or an appropriate child restraint system.
75
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Wearing a seat belt
●Do not recline the seat any more than necessary to achieve a proper seat- ing position. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.
●Do not wear the shoulder belt under your arm. ●Always wear your seat belt low and snug across your hips.
■When children are in the vehicle
Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfas- tened, scissors should be used to cut the belt.
■Adjustable shoulder anchor
Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in the event of a sudden stop, sudden swerve or accident. (P. 70)
■Seat belt pretensioners
●Do not place anything, such as a cushion, on the front passenger’s seat. Doing so will disperse the passenger’s weight, which prevents the sensor from detecting the passenger’s weight properly. As a result, the seat belt pretensioner for the front passenger’s seat may not activate in the event of a collision.
●If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.
■Seat belt damage and wear
●Do not damage the seat belts by allowing the belt, plate, or buckle to be
jammed in the door.
●Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belt cannot protect an occupant from death or serious injury.
76
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Seat belt damage and wear
●Ensure that the belt and tab are locked and the belt is not twisted.
If the seat belt does not function correctly, immediately contact your Toyota dealer.
●Replace the seat assembly, including the belts, if your vehicle has been
involved in a serious accident, even if there is no obvious damage.
●Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly resulting in death or serious injury.
■When using the third center seat belt
Do not use the third center seat belt with either buckle released. Fastening only one of the buckles may result in death or serious injury in case of sudden braking or a collision.
■Using a seat belt comfort guide (third center seat)
●Make sure the belt is not twisted and that it lies flat. The elastic cord must
be behind the belt and the guide must be on the front.
●To reduce the chance of injury in case of a sudden stop, sudden swerve or accident while driving, remove and store the comfort guide in its pocket when it is not in use.
●Always make sure the shoulder belt is positioned across the center of the shoulder. The belt should be kept away from the neck, and should not slide off the shoulder. Failure to observe these precautions could reduce the effectiveness of the seat belt in an accident, causing death or serious injury.
77
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Using a seat belt extender
●Do not wear the seat belt extender if you can fasten the seat belt without
the extender.
●Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.
●The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.
NOTICE
■When using a seat belt extender
When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.
78
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (manually adjustable type)
The steering wheel can be adjusted to a comfortable position.
Hold the steering wheel and press the lever down.
Adjust to the ideal position by moving the steering wheel horizontally and vertically.
After adjustment, pull the lever up the steering wheel.
to secure
CAUTION
■Caution while driving
Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.
■After adjusting the steering wheel
Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident and resulting in death or serious injury.
79
1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel (power-adjustable type)
The steering wheel can be adjusted to a comfortable position.
Up Down Toward the driver Away from the driver
Auto tilt away
When the key is removed from the engine switch, the steering wheel returns to its stowed posi- tion by moving up and away to enable easier driver entry and exit.
Inserting the key into the engine switch returns the steering wheel to its original position.
CAUTION
■Caution while driving
Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and an accident, resulting in death or serious injury.
80
1-3. Adjustable components (seats, mirrors, steering wheel) Anti-glare inside rear view mirror
Glare from the headlights of vehicles behind can be reduced by using the following functions.
Manual anti-glare inside rear view mirror
Normal position Anti-glare position
81
1-3. Adjustable components (seats, mirrors, steering wheel)
Auto anti-glare inside rear view mirror In automatic mode, sensors are used to detect the headlights of vehicles behind and automatically reduces the reflected light.
Turns automatic mode ON/ OFF
The indicator comes on when automatic mode is turned on. The mirror will revert to the automatic mode each time the engine switch is turned on.
Adjusting the height of rear view mirror
Adjust the height of the rear view mirror by moving it up and down.
82
1-3. Adjustable components (seats, mirrors, steering wheel)
■To prevent sensor error (vehicles with auto anti-glare inside rear view
mirror)
To ensure that the sensors operate prop- erly, do not touch or cover them.
■If a sun visor interferes with the mirror
Hold and rotate the mirror to adjust the support.
CAUTION
■Caution while driving
Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.
83
1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors
Mirror angle can be adjusted using the switch when the engine switch is in the ACC or ON position.
Select a mirror to adjust. (L: left or R: right) Adjust the mirror up, down, in or out using the switch.
Folding back the mirrors
From outside
Push the mirrors towards the back of the vehicle to fold them.
84
1-3. Adjustable components (seats, mirrors, steering wheel)
From inside (if equipped)
Press the switch.
Pressing again will unfold the mir- rors.
Linked mirror function when reversing (if equipped)
Press the switch to turn on/off linked mirror function.
tilt
The outside rear view mirrors will automatically downwards when the vehicle is in reverse, in order to give a better view of ground.
85
1-3. Adjustable components (seats, mirrors, steering wheel)
■When the mirrors are fogged up (vehicles with outside rear view mirror
defoggers) Turn on the mirror defoggers to defog the mirrors. (P. 307)
■Automatic adjustment of the mirror angle (vehicles with driving posi-
tion memory) A desired mirror face angle can be entered to memory and recalled automat- ically by the driving position memory. (P. 62)
■Auto anti-glare function (if equipped)
When the anti-glare inside rear view mirror is set to automatic mode, the out- side rear view mirrors will activate in conjunction with the anti-glare inside rear view mirror to reduce reflected light. (P. 81)
CAUTION
■When driving the vehicle
Observe the following precautions while driving. Failing to do so may result in loss of control of the vehicle and cause an acci- dent, resulting in death or serious injury. ●Do not adjust the mirrors while driving. ●Do not drive with the mirrors folded back. ●Both the driver and passenger side mirrors must be extended and properly
adjusted before driving. ■When a mirror is moving
To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.
■When the mirror defoggers are operating (vehicles with outside rear
view mirror defoggers) Do not touch the rear view mirror surfaces, as they can become very hot and burn you.
86
1-3. Adjustable components (seats, mirrors, steering wheel)
NOTICE
■If the mirrors are frozen
Do not operate the control or scrape the mirror faces. Use a spray de-icer to free the mirror.
87
1-3. Adjustable components (seats, mirrors, steering wheel) Roof luggage carrier
Roof rails Cross rails
Adjustment the position of cross rails
Turn the knobs counterclockwise to loosen the cross rails.
Slide the cross rails to the appro- priate position for loading lug- gage.
After adjusting, be sure to tighten the cross rails by turning knobs clockwise.
88
1
1-3. Adjustable components (seats, mirrors, steering wheel)
CAUTION
■Cross rail adjustment
Make sure the cross rails are locked securely by applying pressure forward and rearward. Failure to do so may cause an accident, death or serious injury in the event of emergency braking or a collision.
■When loading cargo
Observe the following precautions: ●Place the cargo so that its weight is distributed evenly between the front
and rear axles.
●If loading long or wide cargo, never exceed the vehicle overall length or
width. (P. 512)
●Before driving, make sure the cargo is securely fastened to the roof lug-
gage carrier.
●Loading cargo on the roof luggage carrier will raise the vehicle’s center of gravity. Avoid high speeds, sudden starts, sharp turns, sudden braking or abrupt maneuvers, otherwise unexpected loss of control or vehicle rollover may occur.
●If driving for a long distance, on rough roads, or at high speeds, stop the vehicle occasionally during the trip to make sure the cargo remains securely fastened.
●Do not exceed 150 lb. (68 kg) cargo weight on the roof luggage carrier.
NOTICE
■When loading the luggage
Be careful not to scratch the surface of the moon roof.
89
1-4. Opening and closing the windows and moon roof Power windows
The power windows can be opened and closed using the following switches.
Closing One-touch closing (Front windows only)* Opening One-touch opening (Front windows only)*
*: To stop the window partway, operate the switch in the oppo- site direction.
Press the switch down to lock passenger window switches and back window switch.
Use this switch to prevent chil- dren from accidentally opening or closing a passenger window and back window.
Lock switch
90
1
1-4. Opening and closing the windows and moon roof
■The power windows can be operated when
The engine switch is in the ON position.
■Door lock linked power windows operation
The power windows can be opened and closed using the key. (P. 35)
■Operating the power windows after turning the engine switch off
The power windows can be operated for approximately 43 seconds even after the engine switch is turned to the ACC position or turned off. They can- not, however, be operated once either front door is opened.
■Jam protection function (Front windows only)
If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.
■When the power window does not close normally
If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power window switch on the front door. ●After stopping the vehicle, the window can be closed by holding the power window switch in the one-touch closing position while the engine switch is turned to the ON position.
●If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following proce- dure.
Hold the power window switch in the one-touch closing position. Continue holding the switch for a further 6 seconds after the win- dow has closed. Hold the power window switch in the one-touch opening position. Continue holding the switch for a further 2 seconds after the win- dow has opened completely. Hold the power window switch in the one-touch closing position once again. Continue holding the switch for a further 2 seconds after the window has closed.
If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
91
1-4. Opening and closing the windows and moon roof
■Customization that can be configured at Toyota dealer
Settings (e.g. power windows) can be changed. (Customizable features P. 539)
CAUTION
■Closing the windows
Observe the following precautions. Failing to do so may result in death or serious injury. ●The driver is responsible for all the power window operations, including the operation for the passengers. In order to prevent accidental operation, especially by a child, do not let a child operate the power windows. It is possible for children and other passengers to have body parts caught in the power window. Also, when riding with a child, it is recommended to use the window lock switch. (P. 90)
●Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
●When using the key and operating the power windows, operate the power window after checking to make sure that there is no possibility of any pas- senger having any of their body parts caught in the window. Also do not let a child operate window by the key. It is possible for children and other pas- sengers to get caught in the power window.
●When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.
■Jam protection function
●Never try jamming any part of your body to activate the jam protection
function intentionally.
●The jam protection function may not work if something gets caught just
before the window fully closes.
92
1-4. Opening and closing the windows and moon roof Power back window
The power back window can be opened and closed using the switch and key.
From inside
One-touch closing*1,*2
Closing One-touch opening*1
Opening *1:Pressingthe switch
the opposite direction will stop win- dow travel partway.
in
*2:During off-road traveling, the
one-touch closing operation may be deactivated depend- ing on the vehicle speed and road surface conditions. At that time, close the window using the normal closing operation
From outside
Opening Closing Turn the key fully and hold it.
93
1-4. Opening and closing the windows and moon roof
■The power back window can be operated when
●The engine switch is in the ON position. ●The power back window can be opened when the rear window wiper is working. At that time, the wiper stops working until the window is closed again. If the rear window is not fully closed, the rear window wiper, washer, and defogger will not work.
■Operating the power back window after turning the engine switch off
The power back window can be operated for approximately 43 seconds even after the engine switch is turned to the ACC position or turned off. It cannot, however, be operated once either front door is opened.
■Jam protection function
If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly. ■When the power back window does not close normally
If the jam protection function is operating abnormally and a window cannot be closed, perform the following operations using the power back window switch. ●After stopping the vehicle, the window can be closed by holding the power back window switch in the one-touch closing position while the engine switch is turned to the ON position.
●If the window still cannot be closed even by carrying out the operation explained above, initialize the function by performing the following proce- dure.
Hold the power back window switch in the one-touch closing posi- tion. Continue holding the switch for a further 6 seconds after the window has closed. Hold the power back window switch in the one-touch opening posi- tion. Continue holding the switch for a further 2 seconds after the window has opened completely. Hold the power back window switch in the one-touch closing posi- tion once again. Continue holding the switch for a further 2 seconds after the window has closed.
94
1-4. Opening and closing the windows and moon roof
If you release the switch while the window is moving, start again from the beginning. If the window continues to close but then re-open slightly even after performing the above procedure correctly, have the vehicle inspected by your Toyota dealer.
■Customization that can be configured at Toyota dealer
Settings (e.g. power back window) can be changed. (Customizable features P. 539)
CAUTION
■Closing the power back window Observe the following precautions. Failing to do so may result in death or serious injury. ●The driver is responsible for all the power back window operations, includ- ing the operation for the passengers. In order to prevent accidental opera- tion, especially by a child, do not let a child operate the power back window. It is possible for children and other passengers to have body parts caught in the power back window. Also, when riding with a child, it is rec- ommended to use the window lock switch. (P. 90)
●Check to make sure that all passengers do not have any part of their body
in a position where it could be caught when a window is being operated.
●When using the key and operating the power back window, operate the power back window after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the window. Also do not let a child operate window by the key. It is possible for children and other passengers to get caught in the power back window.
●When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.
■Jam protection function
●Never try jamming any part of your body to activate the jam protection
function intentionally.
●The jam protection function may not work if something gets caught just
before the window fully closes.
95
1-4. Opening and closing the windows and moon roof Moon roof
Use the overhead switches to open, close, and tilt the moon roof up and down. ■ Opening and closing
Open The moon roof stops slightly before the fully open position to reduce wind noise. Press the switch again to fully open the moon roof. To stop partway, press the switch lightly. Close To stop partway, press the switch lightly.
Tilt up Tilt down To stop partway, press the switch lightly.
■ Tilt up and down
96
: If equipped
1
1-4. Opening and closing the windows and moon roof
■The moon roof can be operated when The engine switch is in the ON position. ■Door lock linked moon roof operation
The moon roof can be opened and closed using the key. (P. 35)
■Operating the moon roof after turning the engine switch off
The moon roof can be operated for approximately 43 seconds even after the engine switch is turned to the ACC or turned off. It cannot, however, be oper- ated once either front door is opened.
■Jam protection function
If an object is detected between the moon roof and the frame while closing or tilting down, travel is stopped and the moon roof opens slightly.
■When the moon roof does not close normally
Perform the following procedure: ●If the moon roof closes but then re-opens slightly
Stop the vehicle. Press and hold the “SLIDE” switch.*1
The moon roof will close, reopen and pause for approximately 10
seconds.*2 Then it will close again, tilt up and stop. Check to make sure that the moon roof is completely stopped and then release the switch. *1:If the switch is released at the incorrect time, the procedure willhave to be performed again from the beginning.
*2:If the switch is released after the above mentioned 10 seconds pause, automatic operation will be disabled. In that case, press and hold the “SLIDE” or “TILT” switch, and the moon roof will tilt up and stop. Check to make sure that the moon roof is com- pletely stopped and then release the switch.
If the moon roof does not fully close even after performing the above proce- dure correctly, have the vehicle inspected by your Toyota dealer.
97
1-4. Opening and closing the windows and moon roof
■To reduce wind noise
When the moon roof is opened automatically, it will stop slightly before the full open position. Driving with the moon roof in this position can help reduce wind noise. ■Sunshade
The sunshade can be opened and closed manually. However, the sunshade will open automatically when the moon roof is opened.
■Moon roof open reminder function
An alarm will sound when the driver’s door is opened with the moon roof not fully closed and the engine switch off.
■Customization that can be configured at Toyota dealer
Settings (e.g. moon roof) can be changed. (Customizable features P. 539)
98
1
1-4. Opening and closing the windows and moon roof
CAUTION
■Opening the moon roof
Observe the following precautions. Failing to do so may cause death or serious injury. ●Do not allow any passengers to put their hands or heads outside the vehi-
cle while it is moving.
●Do not sit on top of the moon roof.
■Closing the moon roof
Observe the following precautions. Failing to do so may result in death or serious injury. ●The driver is responsible for moon roof opening and closing operations. In order to prevent accidental operation, especially by a child, do not let a child operate the moon roof. It is possible for children and other passen- gers to have body parts caught in the moon roof.
●Check to make sure that all passengers do not have any part of their bod- ies in a position where they could be caught when the moon roof is being operated.
●When using the key and operating the moon roof, operate the moon roof after checking to make sure that there is no possibility of any passenger having any of their body parts caught in the moon roof. Also do not let a child operate moon roof by the key. It is possible for children and other passengers to get caught in the moon roof.
●When exiting the vehicle, turn the engine switch off, carry the key and exit the vehicle along with the child. There may be accidental operation, due to mischief, etc., that may possibly lead to an accident.
■Jam protection function
●Never try jamming any part of your body to activate the jam protection
function intentionally.
●The jam protection function may not work if something gets caught just
before the moon roof fully closes.
99
1-5. Refueling Opening the fuel tank cap
Perform the following steps to open the fuel tank cap: ■ Before refueling the vehicle
● Turn the engine switch to the LOCK position and ensure that
all the doors and windows are closed.
● Confirm the type of fuel. (P. 515)
■ Opening the fuel tank cap
Open the fuel filler door.
Turn the fuel tank cap slowly to open.
100
1-5. Refueling
Hang the fuel tank cap on the back of the fuel filler door.
Closing the fuel tank cap
After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will turn slightly in the opposite direction.
101
1-5. Refueling
■Fuel types (P. 515)
■E85 Fueling Stations (Flex-fuel engine)
E85 fueling stations and fuel pumps can be identified by the indication “E85
85% Ethanol”. For more information about fueling stations, please refer to the U.S. Department of Energy Web site. http://www.afdc.energy.gov/afdc/locator/stations/■Refueling (Flex-fuel engine)
Observe the following precautions when switching fuels, in order to maintain starting and driving performance. ●Do not change fuels when the fuel level is 1/4 or less. ●Always add at least 2.6 gal. (10 L) of fuel. ●After filling up with fuel, warm up the engine or drive the vehicle for at
least 5 minutes or 7 miles (11 km).
●Do not accelerate rapidly immediately after refueling.
■Fuel tank opening for unleaded gasoline
To help prevent incorrect fueling, your vehicle has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps.
102
1
1-5. Refueling
CAUTION
■When refueling the vehicle
Observe the following precautions while refueling the vehicle. Failure to do so may result in death or serious injury. ●After exiting the vehicle and before opening the fuel door, touch an unpainted metal surface to discharge any static electricity. It is important to discharge static electricity before refueling because sparks resulting from static electricity can cause fuel vapors to ignite while refueling.
●Always hold the grips on the fuel tank cap and turn it slowly to remove it. A whooshing sound may be heard when the fuel tank cap is loosened. Wait until the sound cannot be heard before fully removing the cap. In hot weather, pressurized fuel may spray out of the filler neck and cause injury.
●Do not allow anyone that has not discharged static electricity from their
body to come close to an open fuel tank.
●Do not inhale vaporized fuel.
Fuel contains substances that are harmful if inhaled.
●Do not smoke while refueling the vehicle.
Doing so may cause the fuel to ignite and cause a fire.
●Do not return to the vehicle or touch any person or object that is statically
charged. This may cause static electricity to build up, resulting in a possible ignition hazard.
■When refueling
Observe the following precautions to prevent fuel overflowing from the fuel tank: ●Securely insert the fuel nozzle into the fuel filler neck ●Stop filling the tank after the fuel nozzle automatically clicks off ●Do not top off the fuel tank.
■When replacing the fuel tank cap
Do not use anything but a genuine Toyota fuel tank cap designed for your vehicle. Doing so may cause a fire or other incident which may result in death or serious injury.
103
1-5. Refueling
NOTICE
■Refueling
Do not spill fuel during refueling. Doing so may damage the vehicle, such as causing the emission control systems to operate abnormally or damaging fuel system components or the vehicle’s painted surface.
■E85 fuel
E85 fuel can be used only in flex-fuel vehicles. Do not add E85 fuel to a gas- oline-engine vehicle. Filling a gasoline-engine vehicle with E85 fuel will have a negative impact on starting and driving performance and will cause damage to the fuel system components.
104
1
