Download PDF Manual

Fuses


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


234
234
234
235
235
235
237
237


233


Dimensions and weight Overall length mm (in.) 4305
1695
Overall width mm (in.) Overall height mm (in.) 1465
2550
mm (in.) Wheelbase 1475
mm (in.) Front tread Rear tread mm (in.) 1480
Vehicle capacity weight (occupants + luggage) kg (lb.)


363


*: Unladen vehicle


(169.5) (66.7) (57.6)* (100.4) (58.1) (58.2)


(800)


Electric motor Type:


Permanent magnet motor (water cooling) Rated output: 20 kW Maximum output:


33.0/1040 – 5600 kW/rpm


Maximum torque:


350.0/0 – 400 N·m/rpm


Engine Model: 1NZ–FXE Type: 4–cylinder in line, 4 cycle, gasoline Bore and stroke, mm (in.):


75.0 x 84.7 (2.95 x 3.33)


Displacement, cm3 (cu. in.):


1497 (91.4)


234


Fuel Fuel type:


Unleaded gasoline, Octane Rating 87
(Research Octane Number 91) or higher


Fuel tank capacity, L (gal., lmp. gal.):


45 (11.9, 9.9)


Nickel–Metal hydride battery


Hybrid vehicle battery Type: Voltage: 7.2 V Capacity: 6.5 Ah (3HR) Quantity: 38
Overall voltage: 273.6 V


Service specifications ENGINE Valve clearance (engine cold), mm (in.):


Intake Exhaust


0.17—0.23 (0.007—0.009) 0.27—0.33 (0.011—0.013)


Spark plug type:


DENSO SK16R11
NGK IFR5A11


Spark plug gap, mm (in.):


1.1 (0.043)


235


ENGINE LUBRICATION Oil capacity (drain and refill), L (qt, lmp. qt.):


With filter Without filter


3.7 (3.9, 3.3) 3.4 (3.6, 3.0)


Oil grade:


API grade SJ “Energy–Conserving”, SL “Energy–Conserving” ILSAC multigrade engine oil is recommended.


or


Recommended oil viscosity (SAE):


oil05u


COOLING SYSTEM Total capacity, L (qt., Imp. qt.):


HYBRID TRANSAXLE Fluid capacity, L (qt., Imp. qt.):


For gasoline engine For electric motor and inverter and converter Coolant type:


4.9 (5.2, 4.3)


4.6 (4.9, 4.1)


Fluid type:


2.6 (2.7, 2.3)


Automatic transmission fluid Type T–IV or equivalent


“TOYOTA Long Life Coolant” or equiva- lent With ethylene–glycol type coolant for a proper corrosion protection of aluminum components Do not use alcohol type antifreeze or plain water alone.


AUXILIARY BATTERY Open voltage at 20(cid:1)C (68(cid:1)F):


12.6 – 12.8 V 12.2 – 12.4 V 11.5 – 11.9 V


Fully charged Half charged Discharged


is removed with all


[Voltage that is checked 20 minutes after the key lights turned off] Charging rates:


3.5 A max.


the


236


BRAKES Minimum pedal clearance when depressed with the force of 196 N (20 kgf, 44 lbf) with the traction motor running, mm (in.):


80 (3.15)


Pedal free play, mm (in.):


1 – 6 (0.04 – 0.24)


Parking brake adjustment when depressed with the force of 294 N (30 kgf, 66 lbf):


5 – 8 clicks


Fluid type:


SAE J1703 or FMVSS No. 116 DOT 3


STEERING Wheel free play:


Less than 30 mm (1.2 in.)


Tires Tire size and pressure:


Tire size kPa (kgf/cm2 or bar, psi) Standard


Front P175/65R14 84S 240 (2.4, 35) Rear P175/65R14 84S 230 (2.3, 33)


Spare


T125/70D16 96M


420 (4.2, 60)


Wheel size: Standard Spare


14 x 5 1/2JJ 16 x 4T Wheel nut torque, N·m (kgf·m, ft·lbf):


103 (10.5, 76)


NOTE: For a complete information on tires (e.g. replacing tires or replacing wheels), see ”Checking tire pres- ”Aluminum wheel sure” precautions”, page 214 through 219 in Section 8–2.


through


Fuses


90p005a


Engine compartment


1. ABS NO.4 10 A: Anti–lock brake sys-


tem


2. HTR NO.1 30 A: Air conditioning sys-


tem


3. HTR NO.2 30 A: Air conditioning sys-


tem


4. DRL 7.5 A: Daytime running light sys-


tem


5. CDS FAN 30 A: Air conditioning sys-


tem


6. HORN 10 A: Horn 7. HEAD HI (RH) (Vehicles with Daytime light system only) 10 A:


running Right–hand headlight (high beam)


237


90p006a


90p007a


90p008a


Engine compartment


Instrument panel


Trunk


8. AM2 15 A: Starting system, multiport fuel injection system/sequential multi- port fuel injection system, hybrid ve- hicle immobiliser system


9. THRO 15 A: Electronic throttle control


system


10. HEAD (RH) (Vehicles without DAY- TIME RUNNING LIGHT SYSTEM) or HEAD LO (RH) (Vehicles with DAY- TIME RUNNING LIGHT SYSTEM) 10
A: Right–hand headlight


11. HEAD HI (LH) (Vehicles without DAY- TIME RUNNING LIGHT SYSTEM) 10
A: Left–hand headlight (high beam)


238


12. BATT FAN 10 A: Battery cooling fan 13. ABS NO.3 20 A: Hydraulic brake


booster


14. HV 20 A: Hybrid system 15. EFI 15 A: Multiport fuel injection sys- injection


tem/sequential multiport system


fuel


16. HEAD (LH) (Vehicles without DAY- TIME RUNNING LIGHT SYSTEM) or HEAD LO (LH) (Vehicles with DAY- TIME RUNNING LIGHT SYSTEM) 10
A: Left–hand headlight


17. DOME 15 A: Audio system, mult–infor- mation display, interior light, trunk light, power window system, wireless remote control system


18. TURN–HAZ 10 A: Turn signal lights,


Emergency flasher


19. PANEL 5 A: Audio system, ashtray light, headlight beam level control sys- tem, emergency flasher


20. GAUGE 10 A: Gauge and meter, emer- flasher, rear window defogger, gency service reminder indicator and warning buzzers, back–up light, power window system, air conditioning system


36. HTR NO.3 50 A: Air conditioning sys-


tem


37. EMPS 50 A: Electric power steering 38. ABS NO.1 40 A: Anti–lock brake sys-


tem


39. MF HEAD 30 A: Daytime running light


system


40. HTR 50 A: Air conditioning system 41. RDI 30 A: Electric cooling fan 42. ABS NO.2 30 A: Hydraulic brake


booster


21. HTR 10 A: Air conditioning system 22. TAIL 7.5 A: Parking lights, tail lights, license plate lights, side marker lights 23. ECU–IG 5 A: Air conditioning system, anti–lock brake system, electric power steering, daytime running light system 24. STOP 15 A: Stop lights, high mounted


stoplights, anti–lock brake system


25. ACC 10 A: Anti–lock brake system warning light, clock, audio system, mul- ti–information display, shift lock system


26. WIPER 30 A: Windshield wiper 27. ECU–B 7.5 A: Air conditioning system, daytime running light system, electric power steering system, hybrid vehicle immobiliser system


28. CIG 15 A: Power outlet 29. WASHER 15 A: Washer 30. DOOR 30 A: Power door lock system 31. SRS ACC 10 A: SRS airbags, seat


belt pretensioners


32. OBD II 7.5 A: No circuit 33. PWR1 20 A: Power window system 34. AM1 5 A: “ACC”, “CIG”, “SRS ACC”, “WASHER”, “HTR”, “WIPER”, “ECU–IG” and “GAUGE” fuses


35. DC/DC–S 5 A: Inverter and converter


239


240


SECTION 10


REPORTING SAFETY DEFECTS FOR U.S. OWNERS AND UNIFORM TIRE QUALITY GRADING Reporting safety defects for U.S. owners Uniform tire quality gradingg


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


242
242


241


To contact NHTSA, you may either call the Auto Safety Hotline toll–free at 1–800–424–9393 (or 366–0123
in Washington, D.C. area) or write to: NHTSA, U.S. Department of Transportation, Washington, D.C. 20590. You can also obtain other information about motor vehicle safety from the Hotline.


Reporting safety defects for U.S. owners If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the Na- tional Highway Traffic Safety Ad- ministration (NHTSA) in addition to notifying Toyota Motor Sales, U.S.A., (Toll–free: Inc. 1–800–331–4331).


If NHTSA receives similar com- plaints, it may open an investiga- tion, and if it finds that a safety de- fect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual prob- lems between you, your dealer, or Toyota Motor Sales, U.S.A., Inc.


242


Uniform tire quality grading This information has been prepared in ac- cordance with regulations issued by the National Highway Traffic Safety Adminis- tration of the U.S. Department of Trans- portation. It provides the purchasers and/ or prospective purchasers of Toyota vehicles with information on uniform tire quality grading. Your Toyota dealer will help answer any questions you may have as you read this information. DOT quality grades—All passenger car tires must conform to Federal Safety Requirements these grades. Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A.


in addition


to


from


Tread wear—The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150
would wear one and a half (1–1/2) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual condi- tions of their use, however, and may de- part significantly the norm due to variations in driving habits, service prac- tices and differences in road characteris- tics and climate. Traction AA, A, B, C—The traction grades, from highest to lowest, are AA, A, B, and C, and they represent the tire’s ability to stop on wet pavement as mea- sured under controlled conditions on spe- cified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance. Warning: The traction grade assigned to this is based on braking (straight ahead) traction tests and does not include cornering (turning) traction.


tire


Temperature A, B, C—The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissi- pate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to de- generate and reduce tire life, and exces- sive temperature can lead to sudden tire failure. The grade C corresponds to a lev- el of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of perfor- mance on the laboratory test wheel than the minimum required by law. Warning: The temperature grades for this tire are established for a tire that is prop- erly inflated and not overloaded. Exces- sive speed, underinflation, or excessive loading, either separately or in combina- tion, can cause heat buildup and possible tire failure.


243


244


SECTION 1– 1


FEATURES ON NEW TOYOTA VEHICLE Overview of instruments and controls Instrument panel overvieww Instrument cluster and multi–information display overview Indicator symbols on the instrument panel and multi–information display


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


1. Side vents


2. Side defroster outlets


3. Instrument cluster


4. Center vents


5. Running mode selector lever


6. Power door lock switches 7. Power window switches


8. Glove box


9. Auxiliary boxes


10. Tilt steering lock release lever


11. Hood lock release lever


12. Parking brake pedal


13. Window lock switch


Instrument panel overview


11p003b


11p001g


1. Headlight and turn signal switch


2. Wiper and washer switch


3. Rear window defogger switch


4. Trip meter reset button


5. Emergency flasher switch


6. Multi–information display 7. Switching km/h MPH button


8. Security indicator light


9. Clock


10. Car audio


11. Air conditioning controls


12. Auxiliary box


13. Power outlet


14. Ignition switch


15. Cruise control switch


16. Power rear view mirror control switch


17. Instrument panel light control dial


Instrument cluster and multi–information display overview


1. Service reminder indicators and indica-


tor lights


2. Speedometer


3. Fuel gauge


4. Odometer and trip meter


5. Outside temperature display


11p002f


Indicator symbols on the instrument panel and Multi–information display


or


Brake system warning light* 1


Seat belt reminder light* 1


Front passenger’s seat belt reminder light* 1


Low engine oil pressure warning light* 1


Master warning light* 1


or


Anti–lock brake system warning light* 1


Discharge warning light* 1


Open door warning light* 1


Low fuel level indicator light* 1


SRS warning light* 1


Low coolant temperature indicator light (in blue)* 1
High coolant temperature warning light (in red)* 1


Turn signal indicator lights


Headlight high beam indicator light


Malfunction indicator lamp* 1


Headlight indicator light


* 1: For details, see ”Service reminder indicators and warning buzzers— —Instrument cluster” on page 91 in Section 2–4. * 2: For details, see “Service reminder indicators and warning buzzers— —Multi–information display” on page 97 in Section 2–4. If this light flashes, see ”Cruise control” on page 107 in Section 2–5.


* 3:


Tail light indicator light


Cruise control indicator light* 3


Running mode position indicator light


Driving ready light


Output control warning light* 1


Hybrid vehicle battery warning light* 2


Power steering warning light* 2


Hybrid system warning light* 2


SECTION 1– 2


FEATURES ON NEW TOYOTA VEHICLE Toyota hybrid system Toyota hybrid system Toyota hybrid system operating conditionn Starting your vehicle For efficient use of your vehicle Precautions for use


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


11
11
12


Toyota hybrid system operating condition Basic operations are described below. Be- sides, Toyota hybrid system performs vari- ous controls depending on the operating condition, such as at the time of hybrid system starting, at the time of charging should be required, at the time of the air conditioning is in use, etc.


Since the battery is charged by the gasoline engine as needed, it does not require charging from the outside like an electric vehicle. In this way, greatly improved fuel economy and reduced emissions are attained. If you do not use the vehicle for a long time, the hybrid vehicle battery will dis- charge and the battery condition is liable to decline.


to


the


improve


Toyota hybrid system Toyota hybrid system combines the gasoline engine and the electric motor power fuel economy largely and minimize the emissions as well as to provide higher power perfor- mance than the ordinary gasoline–pow- ered vehicles. Depending on the driving condition, the vehicle runs on the best combination of; (cid:1) Gasoline engine power (cid:1) Electric motor power generated by


the gasoline engine


(cid:1) Electric motor power of the hybrid


vehicle battery


Furthermore, the energy is effectively used in the following ways: (cid:1) When stopping the vehicle, the gaso-


line engine is automatically stopped.


(cid:1) When decreasing the speed by apply- ing the brakes, electricity converted from the turning force of the wheels is stored the hybrid vehicle battery. (This is called regenerative brake.)


in


12p016a


12p017a


12p018a


Electric power in use


Gasoline power in use


Electric and gasoline power in use


When starting or backing up, etc., the gasoline engine efficiency worsens, so the vehicle runs on electric power from hybrid vehicle battery.


During normal driving, the vehicle runs mainly on gasoline power. However, the electric motor, using electric power gener- ated by the gasoline engine, makes up for any deficiency of gasoline power. The vehicle controls the optimum ratio of the gasoline and electric power to help save energy more effectively.


When driving at full throttle, electric power is further applied from the hybrid vehicle battery. Vehicle performance impro- ves.


12p019a


12p020a


12p030


Storing electric power


Not in use


When decreasing speed or applying the brakes, the turning force of the wheels the electric motor operate as a makes generator and additional electricity is stored in the hybrid vehicle battery (regen- erative brake).


When stopping, the gasoline engine auto- matically shuts off.


Charging hybrid vehicle battery When the hybrid vehicle battery power is insufficient, the gasoline engine charges the hybrid vehicle battery. The system al- ways supplies electricity at a constant lev- el.


10


in


the


from


“ON”


ignition key


“P” position only. When


Starting your vehicle Turn to “START” with the running mode selector lever the “READY” light flashes and stays on and a beep sounds after a few seconds, the hybrid system starts. (If the ambient tem- perature is low such as during winter con- ditions, the “READY” light is on.) Being different from ordinary vehicles, you cannot start your vehicle with the running mode selector le- ver in “N” position. (For details, see “How to start the hybrid system—” on page 162
in Section 4.)


time until


it may


take


For efficient use of your vehicle Drive your vehicle with a smooth accel- eration and deceleration. (cid:1) When driving, energy is effectively re- covered through the regenerative brake as the vehicle decelerates. However, for more efficient use, do not acceler- ate or decelerate your vehicle more than necessary.


(cid:1) By avoiding abrupt acceleration and de- celeration, the remaining capacity of the hybrid vehicle battery can be pre- served and it makes it possible to run the vehicle utilizing the gasoline engine and the electric power from the hybrid vehicle battery.


(cid:1) The remaining capacity of the hybrid vehicle battery can be confirmed on the energy monitor screen of the multi– information display. See “Information” on 113 page in Section 2–6 for details. As the way in which you drive may decrease the remaining capacity of the hybrid vehicle battery and reduce fuel economy, drive your vehicle without abrupt acceleration or deceleration.


Use the “A/C” mode (with the “A/C” button only on) when you use the air conditioning. (cid:1) As


the gasoline engine starts and stops automatically in this mode, eco- nomical driving with less emissions is possible.


is


frequently used. Use


(cid:1) In the “MAX” mode (with the “A/C” but- ton and “MAX” button on), the gasoline engine this mode only when you need to operate the air conditioning fully such as when you should dehumidify or when you are under a burning sun.


When parking, be sure to put the run- ning mode selector lever in “P” posi- tion. While driving, use “D” position. (cid:1) With the selector lever in “N” position, the gasoline engine operates but elec- tricity generated. The constant electrical power remaining in the hybrid vehicle battery becomes in- sufficient and the battery will be dis- charged.


cannot


be


11


If the output control warning light ( comes on in the instrument cluster, the hybrid vehicle battery temperature is low or high, or the hybrid vehicle bat- tery capacity is decreased with the se- lector lever at “R” during driving. As it does not indicate the failure of the sys- tem, you can continue driving but avoid hard acceleration because the power is insufficient (which is caused by the bat- tery power deterioration).


Precautions for use The vehicle runs in combination with the gasoline and electric power. Pay special attention to the following items. Be careful of a high voltage and high temperature. Your vehicle is equipped with the orange colored cables connected the hybrid vehicle battery which contain a high volt- age (about 300 V) and to other high volt- age parts.


to


CAUTION


Do not touch or come in contact with orange cables or battery terminals. Electric shock may cause serious in- jury or death. Read all caution labels.


A electric motor, coolant radiator and some other parts reach high temperature when you are driving. Caution labels are applied to these parts. Carefully observe the instructions on these caution labels.


(cid:1) The hybrid system automatically con- trols the level of electrical power re- maining in the hybrid vehicle battery. With the selector lever in a position other than “N”, electricity is generated and charging occurs when the level of electrical power in the hybrid vehicle battery decreases. It is unnecessary to charge the hybrid vehicle battery from outside.


INFORMATION: The gasoline engine starts and stops automatically. (It stops during a low load driving, deceleration or when the vehicle stopped.) If the “READY” light remains on, you can start your vehicle using the electric motor even with the gasoline engine stopped. The gasoline engine may not stop auto- matically in the following conditions:


(cid:2) During under gasoline engine warm–


up


(cid:2) During hybrid vehicle battery charg-


ing


(cid:2) When the air conditioning is used in the “MAX” mode, the gasoline engine is frequently used.


12


CAUTION


Hybrid vehicle battery


remove or disassemble


Never the high voltage parts, high voltage cables (orange color) and their con- nectors. It may cause death or seri- ous injury.


Service plug


12p007d


High volt- age cables


Inverter unit


Do not touch the service plug. The service plug is installed in the left side trim of the trunk. It is provided to shut out high voltage current of the hybrid vehicle battery when in the vehicle need of repairs at a Toyota dealer.


is


CAUTION


(cid:1) The shaded parts in the illustration


are subjected to a high voltage.


(cid:1) Inappropriate handling may cause an electric shock resulting in seri- ous injury or death. Never touch any item in shaded area.


Keep your hybrid vehicle’s driving char- acteristics in mind. (cid:1) As the vehicle runs with both the gaso- line engine and electric motor, you may hear a motor sound coming from the engine compartment.


(cid:1) When the ignition switch is turned to on or off, you may hear a sound com- ing from the hybrid vehicle battery in the trunk. However, this does not indi- cate any trouble.


(cid:1) If the “READY” light is on, you can the gasoline engine


start even with stopped.


(cid:1) When the hybrid vehicle battery tem- perature is low or high, or the hybrid vehicle battery capacity is decreased with the selector lever at “R” during driving, the output control warning light comes on and the output might be lim- ited for longer battery charge life.


(cid:1) If the output control warning light is on, drive your vehicle without hard accel- eration. The output power will be limit- ed particularly when backing up.


13


(cid:1) When you put the running mode selec- tor lever in “B” position and release your foot from the accelerator pedal, engine braking will be applied. Howev- er, during the high speed driving you may feel that deceleration by engine braking is less than that of ordinary vehicle.


is decreased with


Drive your vehicle without hard accel- if the output control warning eration light ( ) is on. The hybrid vehicle battery temperature is low or high, or the hybrid vehicle battery capacity the selector lever at “R” during driving. If this occurs, the output control warning light comes on. If the output control warning light is on, the hybrid system output is limited. Drive your vehicle without hard acceleration. Vehicle performance might be reduced sig- nificantly especially when backing up. Be sure to put the running mode selec- tor lever in “P” position when parking. With the selector lever in “N” position, the hybrid vehicle battery assembly is not charged, even if the gasoline engine is operating. You cannot run your vehicle if the selector lever is left in “N” position for a long time because the hybrid vehicle battery assembly will be discharged.


14


When you leave your vehicle, apply the parking brake with the running mode selector lever in “P” position and be sure to remove the key and lock all the doors. When you leave the the ignition key in the “ACC” or “ON” position if the hybrid sys- tem is not operating, the hybrid system may not start because the auxiliary bat- tery will be discharged.


CAUTION


(cid:1) When you


leave your vehicle, be


sure to shut off the hybrid system.


lever


(cid:1) Be sure to put the running mode selector in “P” position be- cause the vehicle can start with the “READY” light on and the engine stopped (no engine sound and vibration). When the “READY” light is on, if you leave your vehicle with the running mode selector lever in a position other than “P” and “N”, the vehicle will creep and start abruptly with the accelerator pedal being depressed by mistake. It may cause death or serious injury.


12p008a


If the multi–information display shows a message, the master warning light ) comes on in the instrument clus- ter. Read the message and follow the instruction. (cid:1) When you leave your vehicle, or stop or park for a while, put the selector lever in “P”.


(cid:1) Charging is necessary. With the selec- tor lever in “N” position, charging will not be applied. The electric generator operates in “P”, “D” or “B” position. If you continue driving, put the selector lever in “D” or “B” position and depress the accelerator pedal. Do not leave it in “N” position. When driving in traffic jam, run in “D” position.


12p009c


Do not put the luggage on the package tray behind the rear seatback. (cid:1) An air vent is provided on the package tray behind the rear seatback to cool the hybrid vehicle battery. If this vent is covered with something, the hybrid vehicle battery will overheat resulting in a reduction of the output performance of the hybrid system.


(cid:1) Do not apply water or put foreign ob- jects over the air vent. Otherwise, it may affect the hybrid vehicle battery adversely and cause damage.


(cid:1) You may hear a cooling fan noise from


the air vent.


For vehicle repairs or maintenance, be sure to consult your Toyota dealer. If your vehicle is beyond repair because of accident or something, be sure to consult your Toyota dealer. As sealed Nickel–Metal hydride batteries are used, be sure to consult your Toyota dealer when disposing of your vehicle.


CAUTION


If you are involved in an accident, follow these precautions. (cid:1) Move the vehicle to a safe place and perform the followings to re- duce the risk of high voltage elec- tricity leakage. (cid:1) Depress the brake pedal and put the


selector lever in “P” position.


(cid:1) Apply the parking brake. (cid:1) Turn the ignition switch to “LOCK”


and remove the key.


(cid:1) If your vehicle has experienced ma- jor damage, you may get an electric shock. To prevent this, never touch the high voltage parts (hybrid ve- hicle battery assembly, etc.) or cables (orange color) connecting these parts. If some exposed elec- tric wiring is protruding inside or outside of the vehicle, an electric shock may also occur. Never touch them.


(cid:1) If the fluid leaks or gets in some part of the vehicle, never touch it because it may be electrolyte (strong alkali) from the hybrid ve- hicle battery. If it gets on your skin or eyes, wash off immediately with a large amount of water, if possible, with boric acid solution, and get immediate medical attention in or- der to help avoid serious injury.


(cid:1) If a vehicle fire occurs, extinguish it using a fire extinguisher for the exclusive use on electric fires. As a small amount of water may be dangerous, use a large amount of water, for example from a fire hy- drant, or wait fire–fighting team arrival.


for a


15


towing,


(cid:1) When your vehicle needs


to be towed, do it with the front wheels or all four wheels raised. If the front wheels are on the ground when the electric motor may continue to generate electricity which could cause leakage of elec- tricity and a fire depending on the degree of damage. See “If your ve- hicle needs to be towed” on page 180 in Section 5.


16


SECTION 2– 1


OPERATION OF INSTRUMENTS AND CONTROLS Keys and Doors Keys Hybrid vehicle immobiliser system Side doors Power windows Trunk lid Hood Theft deterrent system Fuel tank cap


. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


18
20
22
28
31
32
34
35


17


Keys


21p001


Your vehicle is supplied with two kinds of keys. 1. Master key (black)—This key works in lock. Your Toyota dealer will every need it to make you a new key with built–in transponder chip.


2. Sub key (gray)—This key will not work


in the trunk.


A transponder chip for the hybrid vehicle immobiliser system has been filled in the head of the master and sub keys. These chips are required for the system to func- tion correctly, so be careful not to lose these keys. If you make your own dupli- cate key, you will not be able to cancel the system or start the hybrid system. To protect items locked in the trunk when someone else parks your vehicle for you (such as an attendant or valet), leave the sub key with them. Since the doors and trunk can be locked without a key, you should always carry a spare master key in case you accidentally lock your keys inside the vehicle.


21p002a


NOTICE


When using a key containing a trans- ponder chip, observe the following precautions: (cid:2) When starting the hybrid system, do not use the key with a key ring resting on the key grip and do not press the key ring against the key grip. Doing so may prevent the hy- brid system from starting.


18


21p003a


21p004a


(cid:2) Do not bend the key grip.


(cid:2) When starting the hybrid system, do not use the key in proximity with other transponder keys (includ- ing keys of other vehicles) and do not press other key plates against the key grip. Doing so may prevent the hybrid system from starting or, may cause the hybrid system to stop soon after it starts. If this hap- pens, remove the key once and then insert it again after taking off other transponder keys (including keys of other vehicles) from the ring or while gripping or covering them with your hand to start the hybrid system.


(cid:2) Do not cover the key grip with any material that cuts off electromagnet- ic waves.


(cid:2) Do not knock the key hard against


other objects.


(cid:2) Do not leave the key exposed to high temperatures for a long period, such as on the dashboard or hood under direct sunlight.


(cid:2) Do not put the key in water or


wash it in an ultrasonic washer.


(cid:2) Do not use the key with electromag-


netic materials.


19


Hybrid vehicle immobiliser system


21p005


21p006


21p007a


KEY NUMBER PLATE Your key number is shown on the plate. Keep the plate in a safe place such as your wallet, not in the vehicle. If you should lose your keys or if you need additional keys, duplicates can be made by a Toyota dealer using the key number. We recommend that you write down the key number and keep it in a safe place.


The hybrid vehicle immobiliser system is a theft prevention system. When you insert the key in the ignition switch, the transponder chip in the key’s head transmits an electronic code to the ve- hicle. The hybrid system will start, only when the electronic code in the chip corresponds to the registered ID code for the vehicle.


20


indicator


light will start


The system is automatically set when the key is removed from the ignition switch. The flashing to show the system is set. If either of the following indicator condi- tions occurs, contact your Toyota dealer. (cid:1) The light stays on except when the theft deterrent system is set- ting or activating. (See ”Theft deterrent system” on page 34 in this section.)


indicator


(cid:1) The indicator light does not start flash- ing when the key is removed from the ignition switch.


(cid:1) The indicator light flashes unsteady.


Inserting the registered key in the ignition switch automatically cancels the system, which enables the hybrid system to start. The indicator light will go off. For your Toyota dealer to make you a new key with built–in transponder chip, your dealer will need your key number and master key. However, there is a limit to the number of additional keys your Toyota dealer can make for you. If you make your own duplicate key, you will not be able to cancel the sys- tem or start the hybrid system.


For vehicles sold in U.S.A.


For vehicles sold in Canada


FCC ID: MOZ RI–9BTY–1
MADE IN JAPAN This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause unde- sired operation.


This device complies with RSS–210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause interfer- ence, and (2) this device must accept any interference that may cause undesired operation of the device.


interference,


including


NOTICE


CAUTION


Do not modify, remove or disas- semble the hybrid vehicle immobiliser system. If any unauthorized changes or modifications are made, the proper operation of the system cannot be guaranteed.


Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user’s authority to operate the equip- ment.


21


Side doors—


21p008


The driver’s window can be opened and closed from outside the vehicle using a key. For details, see “Power windows” on page 28 in this section.


LOCKING AND UNLOCKING WITH KEY Insert the key into the keyhole and turn it. To lock: Turn the key forward. To unlock: Turn the key backward. All lock and unlock simulta- neously with either front door. In the driv- er’s door lock, turning the key once will unlock the driver’s door and twice in suc- cession will unlock all the doors simulta- neously.


the doors


22


21p009


IN-


LOCKING AND UNLOCKING WITH SIDE LOCK KNOB Move the lock knob. To lock: Push the knob forward. To unlock: Pull the knob backward. The driver’s door can be opened by pull- ing the inside door handle even if the lock knob is depressed. Closing the door with the lock knob in the lock position will also lock the door. Be careful not to lock your keys in the ve- hicle. The door cannot be locked if you leave the key in the ignition switch.


21p010


Driver’s side


21p011


Passenger’s side


LOCKING AND UNLOCKING WITH POWER DOOR LOCK SWITCH Push the switch. To lock: Push the switch on the front side. To unlock: Push the switch on the rear side. All the doors lock or unlock simultaneous- ly.


21p012a


to


the


lock


lever


the “LOCK”


REAR DOOR CHILD–PROTECTORS Move position as shown on the label. This feature allows you to lock a rear door so it can be opened from the outside only, not from inside. We recommend us- ing this feature whenever small children are in the vehicle.


23


CAUTION


Before driving, be sure that the doors are closed and locked, especially when small children are in the ve- hicle. Along with the proper use of seat belts, locking the doors helps prevent the driver and passengers from being thrown out from the ve- hicle during an accident. It also helps prevent the doors from being opened unintentionally.


24


—Wireless remote control


21p013e


Locking operation


21p014d


Unlocking operation


THE


AND


UNLOCKING


The wireless remote control system is designed to lock or unlock both doors, or activate the theft deterrent system from a distance within approximately 1
m (3 ft.) of the vehicle. LOCKING DOORS To lock and unlock all the doors, push the switches of the transmitter slowly and securely. To lock: Push the “LOCK” switch. All the doors are locked simultaneously. At this time the parking lights, side marker lights, license plate lights and tail lights will flash once. Check to see that the doors are securely locked. If either door is not securely closed, lock- ing cannot be performed by the “LOCK” switch.


the


to unlock


the “UNLOCK” switch


“UNLOCK” switch To unlock: Push once the only driver’s door. Pushing the switch twice within 3 seconds unlocks all the doors simultaneously. Each time the “UNLOCK” switch is pushed, the parking lights, side marker lights, license plate lights and tail lights will flash twice. When is pressed the interior light comes on. The lights re- mains on for about 15 seconds unless either door is opened then and closed. (For “Interior lights” on page 84 in Section 2–3.) You have 30 seconds to open a door after using the wireless remote unlock feature. If a door is not opened by then, all the doors will be automatically locked again. If the “LOCK” or “UNLOCK” switch is kept pressed in, the locking or unlocking opera- tion is not repeated. Release the button and then push again.


information,


further


see


21p015


WIRELESS REMOTE CONTROL TRANS- MITTER The wireless remote control transmitter is an electronic component. Observe the fol- lowing instructions in order not to cause damage to the transmitter. (cid:1) Do not leave the transmitter on places the temperature becomes high


where such as on the dashboard.


(cid:1) Do not disassemble it. (cid:1) Avoid knocking


it hard against other


objects or dropping it.


flashes


to break


“PANIC” SWITCH Pushing the “PANIC” switch blows the horn intermittently and the headlights and tail lights. The “PANIC” switch is used to deter ve- hicle theft when you witness anyone at- tempting into or damage your vehicle. The alarm will have for one minute. To stop alarm midway, push the “PANIC” or “UNLOCK” switch once again, unlock any door with the key or transmitter, or turn the ignition key from the “LOCK” to “ON” position. The “PANIC” mode does not work when the ignition key is in the “ON” position.


for


transmitters


(cid:1) Avoid putting it in water. You can use up to 4 wireless remote con- the same vehicle. trol Contact your Toyota dealer for detailed information. If the wireless remote control transmitter does not actuate the doors or alarm, or operate from a normal distance. (cid:1) Check for closeness to a radio trans- mitter such as a radio station or an airport which can interfere with normal operation of the transmitter.


(cid:1) The batteries may have been con- sumed. Check the battery in the trans- mitter. To replace the battery, see “RE- PLACING TRANSMITTER BATTERY” below.


25


interference


NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec- tion against harmful in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer- ence television reception, which can be determined by turning the equipment off and on, the user is en- couraged to try to correct the interfer- ence by one or more of the following measures:


to radio or


If you lose your transmitter, contact your Toyota dealer as soon as possible to avoid the possibility of theft, or an acci- dent. (See “If you lose your wireless re- mote control transmitter” on page 183 in Section 5.) For vehicles sold in U.S.A.


This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause unde- sired operation.


26


(cid:1) Reorient or relocate the receiving an-


tenna.


(cid:1) Increase the separation between the


equipment and receiver.


(cid:1) Connect the equipment into an outlet to


on a circuit different which the receiver is connected.


from


that


(cid:1) Consult the dealer or an experienced


radio/TV technician for help.


FCC WARNING: Changes or modifications not ex- pressly approved by the party respon- sible for compliance could void the user’s authority to operate the equip- ment.


For vehicles sold in Canada


(1)


Operation is subject to the following two conditions: this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.


REPLACING TRANSMITTER BATTERY For replacement, use CR2016 lithium bat- tery or equivalent.


CAUTION


Special care should be that small children do not swallow the re- moved transmitter battery or compo- nents.


taken


NOTICE


(cid:2) During replacing the transmitter battery, do not push the “LOCK” and “UNLOCK” switches many times.


(cid:2) When replacing the transmitter bat- tery, be careful not to lose the components.


(cid:2) Replace only with the same or equivalent type recommended by a Toyota dealer.


(cid:2) Dispose of used batteries according


to the local laws.


Replace the transmitter battery by the fol- lowing procedures.


21p016b


21p017b


1. Using a coin or equivalent, open the


2. Remove the discharged transmitter bat-


transmitter case.


tery.


NOTICE


Do not bend the terminals.


27


21p018b


3. Put a new transmitter battery with posi-


tive (+) side up.


Close the transmitter case securely.


NOTICE


(cid:2) Make sure the positive side and negative side of the transmitter bat- tery should be faced correctly.


(cid:2) Do not replace the battery with wet hands. Water may cause unexpected rust.


(cid:2) Do not touch or move any compo- nents inside the transmitter, or it may interfere with proper operation. (cid:2) Be careful not to bend the electrode of the transmitter battery insertion and that dust or oils do not adhere to the transmitter case.


(cid:2) Close the transmitter case securely.


replacing battery, check


After the transmitter operates properly. If the trans- mitter still does not operate properly, con- tact your Toyota dealer.


that


28


Power windows


21p019


The windows can be operated with the switch on each door. The power windows work when the ignition switch is in the “ON” position. Key off operation: If both front doors are closed, they work for 45 seconds even after the ignition switch is turned off. They stop working when either is opened. OPERATING THE DRIVER’S WINDOW Use the switch on the driver’s door. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Lightly pull up the switch.


front door


21p020a


Automatic operation: Push the switch completely down or pull it completely up, and then release it. The window will fully open or close. To stop the window part- way, lightly move the switch in the oppo- site direction and then release it. Jam protection function: During automat- ic closing operation or key off closing op- eration, the window stops and opens half– way if something gets caught between the window and window frame. If the window receives a strong impact, this function may work even if nothing is caught.


CAUTION


(cid:1) Never try jamming any part of your jam protection


body to make the function work intentionally.


(cid:1) The


jam protection


function may not work if something gets caught just before fully closed.


the window


is


Window lock switch


21p021


OPERATING THE PASSENGERS’ WINDOWS Use the switch on each passenger’s door or the switches on the driver’s door that control each passengers’ win- dow. The window moves as long as you hold the switch. To open: Push down the switch. To close: Pull up the switch. If you push in the window lock switch on the driver’s door, the passengers’ windows cannot be operated.


29


CAUTION


To avoid serious personal injury, you must do the following. (cid:1) Always make sure the head, hands and other parts of the body of all occupants are kept completely in- side the vehicle before you close the power windows. If someone’s neck, head or hands gets caught in a closing window, it could result in a serious injury. When anyone closes the power windows, be sure that they operate the windows safe- ly.


(cid:1) When small children are in the ve- hicle, never let them use the power window switches without supervi- sion. Use the window lock switch to prevent from making unex- pected use of the switches.


them


(cid:1) Never leave small children alone in the vehicle, especially with the igni- tion key still inserted. They could use the power window switches and in a window. Unat- get tended children can become in- volved in serious accidents.


trapped


21p023


the


into


the key


OPERATING THE DRIVER’S WINDOW FROM OUTSIDE THE VEHICLE The driver’s window can be raised or low- ered using an ignition key. Insert ignition key hole. To close the window: Turn the key in the locking direction and hold it. After the door is locked, the window be- gins to close. To stop in the middle, return the key. To open the window: Turn the key in the unlocking direction and hold it. After the window begins to open. To stop in the middle, return the key.


is unlocked,


the door


21p022b


30


Trunk lid—


—Lock release lever


CAUTION


Keep the trunk lid closed while driv- ing. This not only keeps the luggage from being thrown out, but also pre- vents exhaust gases from entering the vehicle. (cid:1) Always lock the trunk lid and all doors, and keep away the vehicle keys out of children’s reaches.


(cid:1) Never leave children unattended in the vehicle. Unsupervised children may lock themselves in the vehicle or trunk and suffer serious injuries or death.


21p025a


To open the trunk lid from the driver’s seat, pull up on the lock release lever.


21p024a


To open the trunk lid from the outside, insert the key and turn it clockwise. See “Luggage stowage precautions” on page 156 in Section 3 for precautions to observe in loading luggage. To close the trunk lid, lower it and press down on it. After closing the trunk lid, try pulling it up to make sure it is securely closed.


31


—Lock release lever cancelling system


—Internal trunk release handle


Hood


21p042


21p033c


21p026a


After closing the trunk lid, insert the master key and turn it counterclockwise to deactivate the lock release lever. After closing the trunk lid, try pulling it up to make sure it is securely locked.


If a person is locked in the trunk, he or she can pull down the phosphores- cent handle on the inside of trunk lid in case of emergency to open the trunk lid. The (glow–in–the–dark) handle will continue to glow for a time after the trunk lid is closed. Exposing the handle to stronger light will cause it to glow longer.


phosphorescent


To open the hood: 1. Pull the hood lock release lever. The


hood will spring up slightly.


CAUTION


Before driving, be sure that the hood is closed and securely locked. Other- wise, the hood may open unexpected- ly while driving and an accident may occur.


32


21p027c


21p032c


NOTICE


Be sure to return the support rod to its clip before closing the hood. Clos- ing the hood with the support rod inserted into the slot could cause the hood to bend.


2. In front of the vehicle, pull up the the


lever and


lift


auxiliary catch hood.


3. Hold the hood open by inserting the


support rod into the slot.


Before closing the hood, check to see that you have not forgotten any tools, rags, etc. and return its clip—this prevents rattles. Then lower the hood and make sure it locks into place. If necessary, press down gently on the front edge to lock it.


the support rod


to


CAUTION


After inserting the support rod into the slot, make sure the rod supports the hood securely from falling down on to your head or body.


33


Theft deterrent system


21p028


21p029a


To deter the vehicle theft, the system is designed to give an alarm if any of the doors, trunk or hood is forcibly un- locked or the battery terminal is discon- nected and then reconnected when the vehicle is locked. The alarm blows the horn intermittently and flashes the headlights and tail lights.


34


SETTING THE SYSTEM 1. Turn


the ignition key position and remove it.


to the ”LOCK”


is


removed


The indicator light will start flashing when the key ignition switch. (See ”Hybrid vehicle immobiliser system” on page 20 for details.) 2. Have all passengers get out of


from


the


the


vehicle.


3. Close and lock all the doors, trunk and


hood.


The indicator light will come on when all the doors, trunk and hood are closed and locked.


The system will automatically be set after 30 seconds. When the system is set, the indicator light will start flashing again. 4. After making sure


light starts flashing, you may leave the ve- hicle.


indicator


the


Never leave anyone in the vehicle when you set the system, because unlocking from the inside will activate the system. WHEN THE SYSTEM IS SET Activating the system The system will give the alarm under the following conditions: (cid:1) If any of the doors is unlocked or if the trunk or hood is forcibly opened without the key or wireless remote con- trol transmitter.


(cid:1) If the battery terminal is disconnected


and then reconnected.


The indicator light will come on when the system is activating.


indicator


If any of the doors are unlocked without the key or wireless remote control trans- mitter and the key is not in the ignition switch, all the doors will be automatically locked again. After 1 minute, the alarm will automatically stop and the light will starts flashing again. Reactivating the alarm Once set, the system automatically resets the alarm after the alarm stops. The alarm will activate again under the same in circumstances ”Activating the system”. Stopping the alarm The alarm will be stopped by the following three ways: (cid:1) Turn the ignition key from the ”LOCK”


described


to ”ON” position.


(cid:1) Unlock any of the doors with the key or wireless remote control transmitter.


(cid:1) Open the trunk with the key. CANCELLING THE SYSTEM The system will be cancelled by above mentioned three ways.


the


there


Loading...
x