12
26
23
27
16
12
18
11
17
17
13
13
22
15
14
14
15
14
11
26
19
12
18
15
29
Doors-Child safety locks
28
Seat belts
29
Seat belts-Shoulder belt anchor
Spare tire & tools
29
Tire Pressure Monitoring (warning) System 28
1 Visit your Toyota dealer for information on customizing this feature. 2 Programmable by customer. Refer to the Owner’s Manual for instructions and more information. 3 HomeLink® is a registered trademark of Johnson Controls, Inc.
OVERVIEW
Instrument panel Steering wheel controls (if equipped)
Automatic Air Conditioning
Steering wheel audio controls1
Steering wheel climate controls1
Multi-information display button1
Voice command button1,2
Telephone controls1,2
Headlight and turn signal controls/Headlight, turn signal and front fog
light controls1
Wiper and washer controls
Multi-information display1
Audio system or navigation system-integrated audio system1,2
Theft deterrent system/Engine immobilizer indicator1
Emergency flasher button
“AIR BAG ON” and “AIR BAG OFF” indicator and front passenger seat
belt reminder lights
Power back door main switch1
“ENGINE START STOP” button (Smart Key)1
Tire Pressure Monitoring (warning) System
Manual Air Conditioning
Vehicles without navigation system
Vehicles with navigation system
Cruise control
Ignition (standard key)1
Tilt and telescopic steering lock release
Fuel filler door opener
Power back door button1
Instrument panel light control
Enhanced VSC/TRAC OFF switch
Windshield wiper de-icer switch1
Power outside rearview mirror controls
Outside rearview mirror1/Rear window defogger button
Air Conditioning controls
1 If equipped 2 For vehicles with a navigation system, refer to the “Navigation System
Owner’s Manual.”
OVERVIEW
Instrument cluster
Tachometer Engine coolant temperature Service indicator and reminder Fuel gauge Speedometer Odometer/trip meter switch and trip meter resetting button Automatic Transmission shift position indicator Odometer and two trip meters
Indicator symbols
For details, refer to “Indicators and warning lights,” Section 2-2, 2011
Owner’s Manual.
Brake system warning1
Driver seat belt reminder
(alarm will sound if speed is over 12 mph)
Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
Charging system warning1
Front passenger occupant classification or front passenger airbag
ON/OFF indicator
Low engine oil pressure warning1
Malfunction/Check Engine indicator1
1 If indicator does not turn off within a few seconds of starting engine, there may be a malfunction. Have vehicle inspected by your Toyota dealer.
Engine oil replacement reminder1
Low fuel level warning
Open door warning
Airbag SRS warning1
Master warning
Automatic Transmission fluid temperature warning1
Low Tire Pressure Warning1
Electric power steering system warning1
Low windshield washer fluid level warning1
Theft deterrent/Engine immobilizer system indicator
Headlight low/high beam indicator
Turn signal indicator
Front fog light indicator
Slip indicator/Hill-start Assist Control indicator/Downhill Assist
Control indicator1
Vehicle Stability Control OFF indicator1
SNOW indicator
Cruise control indicator2
Downhill Assist Control indicator1
Anti-lock Brake System warning1
Traction control OFF indicator1
2 If this light flashes, refer to “Cruise control,” Section 2-4, 2011 Owner’s Manual.
OVERVIEW
Keyless entry Locking operation
Without Smart Key system
With Smart Key system
With power back door
Without power back door
Push
Unlocking operation
Without Smart Key system
With Smart Key system
With power back door
Without power back door
Push ONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for safety. Glass hatch operation (if equipped)
Power back door operation (if equipped) Without Smart Key system
With Smart Key system
With power back door
Without power back door
Push and hold
Push and hold
Panic button
Push and hold
Smart Key system (if equipped) Start function
Green indicator ON
Carrying
Depress brake pedal
Push
NOTE: Gear shift lever must be in Park and brake pedal depressed. Power (without starting engine) Without depressing the brake pedal, pressing the “ENGINE START STOP” switch will change the operation mode in succession from: ACC
Accessories such as the radio will operate.
ON
Power ON; the engine not running.
All systems OFF.
OFF Locking operation
Unlocking operation
Front door lock
Front door unlock*
Push
Grasp
Carry remote to lock Glass hatch unlock
Carry remote to unlock Back door lock/unlock
Lock
Unlock
Push
Push
Push
Carry remote to unlock * Driver door unlocking function can be programmed to unlock driver door only, or all doors. Grasping passenger door handle will unlock all doors.
Carry remote to lock/unlock
NOTE: Doors may also be locked/unlocked using remote.
OVERVIEW
Fuel tank door release and cap
Pull
Store
Turn to open
NOTE: Tighten until one click is heard. If the cap is not tightened enough, Check Engine “ indicator may illuminate.
”
Hood release
Pull
Pull up latch and raise hood
Engage support rod
Engine maintenance
Windshield washer fluid tank Engine oil filler cap Engine oil level dipstick Engine coolant reservoir
NOTE: Regularly scheduled maintenance, including oil changes, will
help extend the life of your vehicle and maintain performance. Please refer to the “Warranty Maintenance Guide.”
Light control-Instrument panel
Brightness control
FEATURES/OPERATIONS
Automatic Transmission
Park* Reverse Neutral Drive “S” mode
“D”
“S”
* The “ENGINE START STOP”/ignition switch must be “ON” and the brake
pedal depressed to shift from Park. “S” (Sequential) mode Shift the shift lever to “S” position from “D” position.
+: Upshift (push and release) -: Downshift (pull and release)
Downshifting increases power going uphill, or provides engine braking downhill. For best fuel economy during normal driving conditions, always drive with the shift lever in the “D” position. Snow mode
Push
The snow mode prevents sudden acceleration on slippery surfaces. Use in snowy or icy road conditions. Door locks
Unlock
Lock
10
Auto lock functions Automatic door locks can be programmed to operate in two different modes, or turned OFF. -Doors lock when shifting from Park. -Doors lock when the vehicle speed goes above approximately 12 mph. -Doors unlock when shifting into Park. Vehicles without Smart Key system -Doors unlock when the ignition switch is set from “ON” to “ACC” or “LOCK” and driver’s door is opened. Vehicles with Smart Key system -Doors unlock when the “ENGINE START STOP” switch is set to OFF and driver’s door is opened. Refer to the Owner’s Manual for more details.
Steering lock release Smart Key system
Turn
Without Smart Key system
Turn
Turn
Push
Push
Parking brake
Set: Depress Release: Depress again
11
FEATURES/OPERATIONS
Tilt and telescopic steering wheel
Angle
Length
Lock release lever
Hold wheel, push lever down, set angle and length, and return lever. NOTE: Do not attempt to adjust while the vehicle is in motion.
Moonroof (if equipped) Sliding operation
Push once to open partway; again to open completely.
Open
Close Recommended open position to minimize wind noise.
Tilting operation
Tilt
Close
Door-Power back (if equipped) Instrument panel
Back door (close only)
Push and hold
Open: Push and hold Close: Push and hold again
Push
NOTE: If battery is disconnected, the power back door needs to be reinitialized. Refer to the Owner’s Manual for more details.
12
Seat adjustments-Front Manual seat
Power seat
Seat position (forward/backward) Seat cushion angle Height crank (driver side only) Seatback angle Seat position, cushion angle (driver side only) and height (driver side only) Driver seat leg support (if equipped) Lumbar support (driver side only)
Seat adjustments-Rear Second row seat
Seat position (forward/backward) Seatback angle Third seat access lever Seatback release
Refer to the Owner’s Manual for more details.
13
FEATURES/OPERATIONS
Seats-Head restraints Front
Rear
Height
Angle (if equipped)
Lock release button
Lock release button
Seats-Removing Center-Stow second row seat (1)
(2)
(3)
(4)
(5)
(1) Remove the second row console from the front center console box. (2) Lower the center head restraint. (3) Pull the strap, then fold down the seatback. (4) Pull the lever behind the second center seat and lift the rear of the
seat to remove.
(5) Stow the seat in the front center console box.
NOTE: The second-row console can now be installed between the second row seats.
Seats-Stowing third row seats
Pull
14
Seats-Returning third row seats (1) Pull
(2) Raise
Refer to the Owner’s Manual for more details.
Seats-Folding down second row seats (if equipped) From outside
From inside
(1) Pull up
Left side/center remote seat release
Right side remote seat release
(2) Fold down
Windshield wipers & washers Front
Adjust frequency*
Single wipe
* Intermittent windshield
wiper frequency adjustment Rotate to increase/decrease wipe frequency.
Rear
Pull to wash and wipe
Interval wipe
Slow
Fast
Wash and wipe Wipe Interval wipe
Wash and wipe
15
FEATURES/OPERATIONS
Lights & turn signals Headlights
With DRL OFF switch
Headlights Parking lights
Auto DRL OFF
Without DRL OFF switch
Auto (if equipped) Headlights Parking lights
Low beam
High beam flasher
High beam
-Daytime Running Light system (DRL) (if equipped) Automatically turns on the headlights at a reduced intensity. -Automatic light cut off system Lights automatically turn off after a delay of 30 seconds, or when lock switch on remote is pushed after all doors are locked.
Front fog lights (if equipped)
Turn
Front fog lights come on only when the headlights are on low beam.
Turn signals
Right turn
Lane change
Lane change
Left turn
16
Power outlets-12V DC
Instrument panel (with seat heater)
Instrument panel (without seat heater)
Center console
Luggage compartment
The “ENGINE START STOP”/ignition switch must be in the “ACC” or “ON” position to be used.
Power outlets-120V AC (if equipped) Beside second row seat
The “ENGINE START STOP”/ignition switch must be in the “ON” position to be used.
17
FEATURES/OPERATIONS
Multi-information display (if equipped)
Push “DISP” to change information in the following: (1) Average gas mileage after refueling (2) Current gas mileage (3) Miles left on remaining fuel (4) Driving distance from engine start (5) Average gas mileage (6) Average gas mileage history
Push and hold “DISP” to set up the displays and the rearview monitor displays.
Windows-Power Driver side
Up
Down
Window lock switch
Automatic operation (driver’s window only) Push the switch completely down or pull it completely up and release to fully open or close. To stop window midway, lightly push the switch in the opposite direction. Window lock switch Deactivates all passenger windows. Driver’s window remains operable.
18
Telephone controls (Bluetooth®) (if equipped) Audio unit
Microphone
Steering wheel telephone controls
Volume
End call
Start call
Voice command button
Bluetooth® technology allows dialing or receipt of calls without taking hands from the steering wheel or using a cable to connect the telephone and the system. Refer to “Using the hands-free phone system (for cellular phone),” Section 3-4 in the Owner’s Manual, or go to Toyota.LetsTalk.com for more information about phone connections and compatibility.
19
FEATURES/OPERATIONS
Air Conditioning/Heating Front automatic Air Conditioning With rear Air Conditioning
Without rear Air Conditioning
Automatic climate control ON Adjusting the temperature setting will cause the airflow vents, air intake and fan to adjust automatically. Windshield airflow/defogger Rear Air Conditioning ON/OFF Fan speed Outside rearview mirror (if equipped)/Rear window defogger Recirculate cabin air (fresh air when OFF) “DUAL” button Indicator ON: Separate temperature settings for driver, front passenger and rear passengers. Indicator OFF: Synchronize temperature settings for driver and all passengers. Temperature selector (front passenger side) Air Conditioning ON/OFF “SYNC” button Indicator ON: Synchronize temperature settings for driver and all passengers. Indicator OFF: Separate temperature settings for driver, front passenger and rear passengers. Temperature selector (rear) Airflow vent In “ ” or “ reduce window fogging. Climate control OFF Temperature selector (driver side)
” mode, use fresh air (“
” indicator OFF) to
20
Front manual Air Conditioning
Fan speed Outside rearview mirror (if equipped)/Rear window defogger Temperature selector Recirculate cabin air (fresh air when OFF) Airflow vent In “ ” or “ reduce window fogging. Air Conditioning ON/OFF Use fresh air to quickly cool interior, then change to recirculate for cooler air. Use for quick cooling. Air intake will automatically be set to recirculate. Rear Air Conditioning ON/OFF (if equipped)
” mode, use fresh air (“
” indicator OFF) to
Rear automatic Air Conditioning (if equipped)
Fan speed Temperature selector Airflow vent Automatic climate control ON Climate control OFF
21
FEATURES/OPERATIONS
Rear manual Air Conditioning (if equipped)
Airflow vent Temperature selector Fan speed
Seat heaters (if equipped)
Driver’s seat
Push
Push
Turn
Front passenger’s seat
Push knob to pop the controller out. Turn clockwise for heater.
Clock Without multi-information display
H-Hour set M-Minute set
With multi-information display
With multi-information display Press and hold “DISP” button. Select “CLOCK” on menu screen. Adjust as indicated on screen.
22
Cruise control Turning system ON/OFF
System ON/OFF
Resume2
Increase speed
Functions
Cancel1
Set
Decrease speed
1 The set speed may also be cancelled by depressing the brake pedal. 2 The set speed may be resumed once vehicle speed exceeds 25 mph.
Garage door opener (HomeLink®)* (if equipped)
Garage door openers manufactured under license from HomeLink®* can be programmed to operate garage doors, estate gates, security lighting, etc. Refer to “Garage door opener,” Section 3-7 in the Owner’s Manual for more details. For programming assistance, contact HomeLink® at 1-800-355-3515, or visit http://www.homelink.com. * HomeLink® is a registered trademark of Johnson Controls, Inc.
23
FEATURES/OPERATIONS
Audio
Type 1
Eject CD Station/CD track scan
Preset buttons - functions in other modes indicated above number
Mute View CD text
Push to turn ON/OFF
Seek station/ CD track select
Mode
Push to skip up/down folder and radio category type
Push to adjust tone & balance
Type 2
Preset buttons - functions in other modes indicated above button
Setting preset button
Mode
Menu
Mute
Type 3 additional functions
Load CD(s)
CD player To scan tracks on a disc Push and hold “SCAN.” Push again to hold selection. CD changer (Type 3 only) -To load one disc Push “LOAD” and insert one disc. -To load multiple discs Push and hold “LOAD” until you hear a beep. Insert one disc. Shutter will close and then re-open for next disc. To select a file (MP3/WMA only) Turn “TUNE.FILE” or “TUNE.SCROLL” or press “ To select a folder (MP3/WMA only) Push either side of “TYPE.FOLDER.”
” or “
” on
24
Radio To preset stations Tune in the desired station and hold down a preset button (1-6) (from button (1-6) (from To scan stations Push and hold “SCAN” to scan preset stations. Push again to hold selection. USB/AUX port Without seat heater
) until you hear a beep. Push desired preset ) to select.
With seat heater
to to
By inserting a mini plug into the USB/AUX port, you can listen to music from a portable audio device through the vehicle’s speaker system while in USB/AUX mode.
Bluetooth® audio (if equipped) Audio unit
Microphone
Steering wheel audio switches
Volume Selects a track and album Turns the power on, selects an audio source
The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player from the vehicle speaker via wireless communication. Refer to “Using the Bluetooth® audio system,” Section 3-3 in the Owner’s Manual for more details.
25
FEATURES/OPERATIONS
Steering wheel controls (if equipped) Audio control A/C control
Volume control
A/C OFF
Temperature selector
Auto A/C ON
”
v v “ Use to search within the selected audio medium (radio, CD, iPod®, etc.). “MODE” Push to turn audio ON and select an audio mode. Push and hold to turn the audio system OFF.
Downhill Assist Control system (DAC) (if equipped)
“DAC” indicator blinking = Downhill assist control system not engaged
Slip indicator blinking, “DAC” indicator solid = Downhill assist control system engaged
Downhill assist control system helps the vehicle to descend steep hills while maintaining a low speed without brake pedal operation. Press the “DAC” button (system will engage only when shifter is in S1 or R mode). Pressing the button again will turn system off. Refer to the Owner’s Manual for more details.
26
Hill-start Assist Control (HAC)
Brake pedal
HAC helps prevent rolling backwards on an incline. To engage, push further down on brake pedal while at a complete stop until a beep sounds and slip indicator illuminates. HAC holds for approximately 2 seconds after releasing brake pedal. Refer to the Owner’s Manual for more details.
Cup holders Front
Console box
Rear
Side table
27
SAFETY AND EMERGENCY FEATURES
Seat belts
Take up slack
Too high
Keep as low on hips as possible
If belt is fully extended, then retracted even slightly, it cannot be re-extended beyond that point, unless fully retracted again. This feature is used to help hold child restraint systems securely.
To find more information about seat belts, and how to install a child restraint system, refer to the Owner's Manual.
Tire Pressure Monitoring (warning) System
System reset initialization 1. Push and hold “
SET” button
until the indicator blinks 3 times.
2. Wait a few minutes to allow
initialization to complete.
SET” button until indicator blinks three times. Let the vehicle sit for
After adjusting tire pressures, or after tires have been rotated or replaced, turn the ignition switch to “ON” and press and hold the “ a few minutes to allow initialization to complete. Refer to the load label on the door jamb or the Owner’s Manual for tire inflation specifications. If the tire pressure indicator flashes for more than 60 seconds and then remains on, take the vehicle to your local Toyota dealer. NOTE: The warning light may come on due to temperature changes or changes in tire pressure from natural air leakage. If the system has not been initialized recently, setting the tire pressures to factory specifications should turn off the light.
28
1-1. Key information Keys
The following keys are provided with the vehicle.
Vehicles without smart key system (type A)
Master keys Valet key Key number plate
Vehicles without smart key system (type B)
Master keys Valet key Key number plate
Vehicles with smart key system
Electronic keys • Operating
system (→P. 33)
the smart key
• Operating
the wireless
remote control function (→P. 46)
Mechanical keys Key number plate
30
1
1-1. Key information
Using the mechanical key (vehicles with smart key system)
Take out the mechanical key.
After using the mechanical key, store it in the electronic key. Carry the mechanical key together with the electronic key. If the electronic key battery is depleted, you will need the mechanical key. (→P. 538)
■When required to leave a key to the vehicle with a parking attendant
Lock the glove box as circumstances demand. (→P. 377) Vehicles without smart key system: Carry the master key for your own use and provide the attendant with the valet key. Vehicles with smart key system: Remove the mechanical key for your own use and provide the attendant with the electronic key only.
■Key number plate
Keep the plate in a safe place such as your wallet, not in the vehicle. In the event that a key is lost, a new key can be made by your Toyota dealer using the key number plate. (→P. 537)
■When riding in an aircraft (vehicles with smart key system)
When bringing an electronic key onto an aircraft, make sure you do not press any buttons on the electronic key while inside the aircraft cabin. If you are carrying an electronic key in your bag etc., ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the elec- tronic key to emit radio waves that could interfere with the operation of the aircraft.
31
1-1. Key information
NOTICE
■To prevent key damage
●Do not subject the keys to strong shocks, expose them to high tempera-
tures by placing them in direct sunlight, or get them wet.
●Do not expose the keys to electromagnetic materials or attach any mate-
rial that blocks electromagnetic waves to the key surface.
●Do not disassemble the key.
32
1-2. Opening, closing and locking the doors Smart key system∗
The following operations can be performed simply by carrying the electronic key on your person, for example in your pocket. (The driver should always carry the electronic key.)
Electronic key
Electronic key
Electronic key
Locks and unlocks the doors (→P. 34) Starts the engine (→P. 166) Opens the glass hatch (→P. 35) Locks and unlocks the doors (→P. 34)
Electronic key
∗: If equipped
33
1-2. Opening, closing and locking the doors
Unlocking and locking the doors
Front door handles
Back door handle
34
Grip the handle to unlock the doors.
Make sure to touch the sensor on the back of the handle. The door cannot be unlocked for 3 seconds after is locked.
the door
Press the lock button to lock the doors.
Press the button to unlock the door.
the door
The door cannot be unlocked for 3 seconds after is locked. If you carry the electronic key on your person, the back door can be opened even if it is locked. Lock the back door again when you leave the vehicle. The back door will not lock automatically after it has been opened and then closed.
1-2. Opening, closing and locking the doors
Press the button to lock the door.
Opening the glass hatch (if equipped)
Press and hold the button to open the glass hatch. The glass hatch will pop up.
The glass hatch can be unlocked only when is closed.
the back door
35
1-2. Opening, closing and locking the doors
Antenna location and effective range
■ Antenna location
Antennas outside the cabin Antennas inside the cabin Antenna outside the luggage compartment
36
1
1-2. Opening, closing and locking the doors
■ Effective range (areas within which the electronic key is
detected)
When locking or unlocking the doors This system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of either of the outside front door handles. When starting the engine “ENGINE or changing START STOP” switch modes This system can be operated when the electronic key is inside the vehicle. When opening the glass hatch and locking or unlocking the doors This system can be operated when the electronic key is within about 2.3 ft. (0.7 m) of the back door handle.
37
1-2. Opening, closing and locking the doors
■Operation signals
A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: Once; Unlocked: Twice)
■Conditions affecting operation
The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system and wireless remote control from operating properly. (Ways of coping: →P. 538) ●When the electronic key battery is depleted ●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise
●When carrying a portable radio, cellular phone, cordless phone or other
wireless communication devices
●When the electronic key is in contact with, or is covered by a metallic
object
●When multiple electronic keys are in the vicinity ●When carrying or using the electronic key together with the following
devices that emit radio waves • Another vehicle’s electronic key • A wireless key that emits radio waves • Personal computer
●If window tint with a metallic content or metallic objects are attached to
the rear window
■Switching the door unlock function
It is possible to set which doors the entry function unlocks.
STEP 1
Turn the “ENGINE START STOP” switch OFF.
When the indicator on the key surface is turned off, push and hold for approximately 5 seconds while pushing
or
on the key.
STEP 2
38
1-2. Opening, closing and locking the doors
The setting changes each time an operation is performed, as shown below. (When changing the setting continuously, release the buttons, wait for at least 5 seconds, and repeat step 2.)
Multi-information
display
Unlocking doors
Beep
Hold the driver's door han- dle to unlock only the driver's door. Hold the front passenger’s door handle to unlock all doors. Hold either front door han- dle to unlock all doors.
Exterior: Beeps three times Interior: Pings once
Exterior: Beeps twice Interior: Pings once
STEP 3
Unlock the doors using the wireless remote control and open one of the doors. If a door is not opened within 60 seconds after is pressed, the doors will be locked again and the alarm will automatically be set. In case that the alarm is triggered, immediately stop the alarm. (→P. 113)
■Battery-saving function
In the following circumstances, the entry function is disabled in order to pre- vent the vehicle and electronic key batteries from discharging. ●When the entry function has not been used for 2 weeks or more ●When the electronic key has been left within approximately 3 ft. (1 m) of
the vehicle for 10 minutes or more
The system will resume operation when... ●The vehicle is locked using the door handle lock button. ●The vehicle is locked/unlocked using the wireless remote control func-
tion. (→P. 46)
●The vehicle is locked/unlocked using the mechanical key. (→P. 538)
39
1-2. Opening, closing and locking the doors
■Electronic key battery depletion
●The standard battery life is 1 to 2 years. (The battery becomes depleted even if the electronic key is not used.) If the smart key system or the wireless remote control function does not operate, or the detection area becomes smaller, the battery may be depleted. Replace the battery when necessary. (→P. 474)
●If the battery becomes low, an alarm will sound in the cabin when the
engine stops. (→P. 41)
●To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the following electrical appliances that produce a magnetic field. • TVs • Personal computers • Recharging cellular phones or cordless phones • Table lamps
■To operate the system properly
Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention may not func- tion.)
■Note for the entry function
●Even when the electronic key is within the effective range (detection
areas), the system may not operate properly in the following cases. • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.
• The electronic key is on the instrument panel, luggage cover, floor or in the glove box when the engine is started or “ENGINE START STOP” switch modes are changed.
●As long as the electronic key is within the effective range, the doors may
be locked or unlocked by anyone.
●Even if the electronic key is not inside the vehicle, it may be possible to
start the engine if the electronic key is near the window.
40
1-2. Opening, closing and locking the doors
●The doors may unlock if a large amount of water splashes on the door handle, such as in the rain or in a car wash. (The doors will automatically be locked after approximately 60 seconds if the doors are not opened and closed.)
●Gripping the door handle when wearing a glove may not unlock the door. ●If the wireless remote control is used to lock the doors when the elec- tronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)
■When the vehicle is not driven for extended periods
To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle.
■Security feature
If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.
■Alarms and warning indicators
A combination of exterior and interior alarms as well as warning lights and warning messages shown on the multi-information display are used to reduce the chance of vehicle theft and accidents resulting from erroneous operation. ●When any warning lights come on:
Take appropriate measures according to which warning light comes on. (→P. 508)
●When a warning message is shown on the multi-information display:
Take appropriate measures according to the warning message on the multi-information display. (→P. 519)
41
1-2. Opening, closing and locking the doors