2005 Toyota Avalon Owners Manual

alarm sounds. (This occurs when the vehicle is about to skid.) If cancelled by a. or b., the “READY” indicator comes on and the dynamic laser cruise control enters the ready mode. If one of the warning codes “C1”, “C2” or “E3” appears on the display, the preset speed automatically cancels out. See “VEHICLE- TO- VEHICLE DISTANCE CONTROL MODE FAILURE WARNING” on page 183. If the preset speed automatically cancels out for other than the above reasons, do not operate the dynamic laser cruise con- trol. Although there is no problem to con- tinue driving, please contact your Toyota dealer.

179

2005 AVALON from Jan. ’05 Prod. (OM41408U)

SETTING THE DESIRED SPEED The transmission must be in “D” before you set the cruise control speed. Bring your vehicle to the desired speed, push the lever down in the “- SET” direc- tion and release it. This sets the vehicle at that speed. At this time, the display indicates settings such as the preset ve- hicle speed, whether a vehicle is present ahead and selected vehicle- to- vehicle dis- tance. is no vehicle detected ahead, the display does not indicate the vehicle ahead. You can now take your foot off the accelerator pedal.

there

If

’05 AVALON_U (L/O 0501)

in

the

lever up

RESUMING THE PRESET SPEED If the preset speed has been cancelled, when you push the “+ RES” direction while the “READY” indi- cator in the instrument cluster comes on at a vehicle speed of more than 40 km/h (25 mph), the speed set prior to cancella- tion will be restored. During follow- up cruising, if there are no vehicles have changed lanes, your vehicle will accelerate gradually up to the preset speed. At this time, pushing the lever up in the “+ RES” direction will quickly speed up your ve- hicle in vehicle- to- vehicle distance control mode.

because

ahead

they

RESETTING TO A FASTER SPEED Push the lever up in the “+ RES” direction and hold it. The displayed speed will in- crease in increments of 5 mph. Release the lever when the desired speed is attai- ned. The vehicle speed will gradually in- crease to the display speed. However, a faster way to reset is to ac- celerate the vehicle and then push the lever down in the “- SET” direction.

CAUTION

When the vehicle- to- vehicle distance control is on, your cruising speed is regulated in proportion to the speed of the vehicle ahead, so increasing the preset speed using the control lever does not accelerate the vehicle. However, if the vehicle ahead leaves the lane, your cruising speed will in- crease to the preset speed because the preset speed has been set higher using the control lever. Confirm the setting on the display.

180

RESETTING TO A SLOWER SPEED Push the lever down in the “- SET” direc- tion and hold it. The displayed speed will decrease in increments of 5 mph. Release the lever when the desired speed is attai- ned. The vehicle speed will gradually de- crease to the display speed. However, a faster way to reset is to de- press the brake pedal and then push the lever down in the “- SET” direction. If the control lever is released when the vehicle speed exceeds the upper limit of the preset speed traveling downhill while you are pushing the lever down, the sys- tem will memorize the upper limit of the preset speed as a preset speed. transmission Even from “D” position or “5” (fifth range) to “4” (fourth range) in sequential mode in the vehicle- to- vehicle distance control mode, engine braking will not be enabled be- cause this mode is not cancelled. To de- crease the vehicle speed, reset to a slow- er speed with the cruise control lever or depress the brake pedal. If you use the brake pedal, cruise control is cancelled.

if you downshift

the

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

then back

to SHORT and

VEHICLE- TO- VEHICLE

CHANGING DISTANCE You can select one of the following ve- hicle- to- vehicle distances. 1. LONG 2. MIDDLE 3. SHORT Each time you push the distance switch briefly, the setting changes from LONG to MIDDLE to LONG. You can confirm the setting on the display. Your vehicle speed changes in proportion to the speed of the vehicle ahead, main- taining the selected distance. However, if the vehicle ahead is slower, the selected distance will be shorter than the desig- nated distance. When the vehicle- to- vehicle distance con- trol mode the “READY” indicator comes on, the vehicle- to- vehicle distance setting can be changed. The vehicle- to- vehicle distance is always set to LONG when the ignition switch is turned on.

is activated or

Select the vehicle- to- vehicle distance con- sidering traffic conditions. The approximate vehicle- to- vehicle distance based on time interval when driving at 88 km/h (55 mph) is shown below:

LONG MIDDLE SHORT

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

about 75 m (245 ft.) about 50 m (165 ft.) about 30 m (100 ft.) If the vehicle speed is slower than 88
km/h (55 mph), the distance will be short- er than the above. During long downhill driving, the vehicle- to- vehicle distance will be shorter than the selected distance.

181

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

Braking control is operating only when the vehicle- to- vehicle distance control mode is selected and your vehicle speed ex- ceeds about 40 km/h (25 mph). the speed decreases below about 40 km/h (25
mph), braking control will cease, requiring the manual application of brakes.

If

CAUTION

Braking control will not ensure that your vehicle will reduce speed ap- propriately. You must depress the brake pedal to slow down, ensuring collision avoidance or that sufficient vehicle- to- vehicle distance is main- tained.

APPROACH WARNING While you are cruising in the vehicle- to- vehicle distance control mode, if the ve- hicle ahead decelerates abruptly or if another vehicle cuts in ahead of you, in- adequate braking will make your vehicle become closer to the vehicle ahead of you and the display will flash and beep.

CAUTION

(cid:1) If the display flashes and beeps, you must depress the brake pedal to slow down to avoid a collision or maintain sufficient vehicle- to- ve- hicle distance.

(cid:1) In the following conditions, the ap- proach warning may not turn on even if the vehicle drives closer to the vehicle ahead, and an accident may occur: Your vehicle and the vehicle ahead are cruising at almost the same speed. The vehicle ahead is cruising at a faster speed than yours. (The dis- tance between the vehicles will be- come longer.) The vehicle ahead is at a stop or driving very slowly. Pay special attention to a very slow vehicle at the end of the line in heavy traffic or at a tollgate. The speed has just been set. The accelerator pedal is depressed or has just been released.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

If

BRAKING CONTROL Dynamic laser cruise control is not a colli- the approach sion avoidance system. warning is activated, depress the brake pedal to decelerate to ensure an appropri- ate vehicle- to- vehicle distance. If you are getting closer to the vehicle ahead at a relatively higher speed than that of if engine braking cannot be applied properly, brak- ing control is automatically activated. At this time, the display flashes.

the vehicle ahead or

182

’05 AVALON_U (L/O 0501)

Before driving in the vehicle- to- vehicle distance control mode, make sure the radar sensor glass is clean.

This product is a class I laser product complied with 21 C.F.R part 1040.10
and 1040.11.

CAUTION

To ensure that dynamic laser cruise control will function properly while driving, observe the following: (cid:1) Always keep the laser radar sensor glass clean. When cleaning, use a soft cloth and be careful not to damage the sensor.

(cid:1) Avoid strong impacts around the la- ser radar sensor. An incorrect laser radar sensor alignment will result in system malfunction. A special de- vice is required to adjust the laser radar sensor alignment. Be sure to have the sensor adjusted by your Toyota dealer.

(cid:1) Do not affix a sticker (including a transparent sticker) or attach an ac- cessory around the laser radar sen- sor.

is on

the sensor glass,

LASER RADAR SENSOR The laser radar sensor is used for ve- hicle- to- vehicle distance control cruis- ing. If dirt the dynamic laser cruise control function is automatically cancelled and a warning code appears on (See “VEHICLE- TO- VEHICLE DISTANCE CONTROL MODE FAILURE WARNING” on page 183.) However, if the glass sensor is covered with icicle or any substance, dirt may not be detected.

the display.

DISTANCE

VEHICLE- TO- VEHICLE CONTROL MODE FAILURE WARNING If there is trouble somewhere in the dy- namic laser cruise control while the ve- hicle- to- vehicle distance control mode is on, the master warning light comes on and the alarm sounds, and one of the warning codes “C1”, “C2” or “E3” will ap- pear on the display. Dynamic laser cruise control is automatically cancelled. If the “CRUISE” indicator light in the instrument cluster also flashes.

“E3” appears on

the display,

183

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

If “C2” appears on the display, the sys- tem cannot easily measure the vehicle- to- vehicle distance because of the following conditions: (cid:1) The wipers are operating at high or low

speeds

(cid:1) Direct sunlight from the front (cid:1) It is difficult to make a measurement because of bad weather (such as rainy, foggy, or snowy weather) the

In laser cruise control switches to the ready mode: stopped or are (cid:1) The wipers

following cases, dynamic

are

switched to intermittent operation. (cid:1) No direct sunlight from the front In the above conditions, push the lever up in the “+ RES” direction and release it. Dynamic laser cruise control will be re- stored. If the setting operation cannot be performed or if the warning code still ap- pears even after the weather clears, the system might have malfunctioned. Al- though there is no problem to continue driving, please contact your Toyota dealer.

this code appears, clean

If “C1” appears on the display, the sys- tem cannot easily measure the vehicle- to- vehicle distance because of a dirty laser radar sensor glass while the dynamic la- ser cruise control is on. If the sensor glass with a soft cloth and try setting the preset speed again. If the dirt is removed without cleaning, the system will automati- cally enter the ready mode. If the system does not enter the ready mode even after cleaning or the code re- mains on the display, the system might be malfunctioning. Although there is no prob- lem to continue driving, please contact your Toyota dealer.

CAUTION

Always keep the sensor glass and never allow to be covered with icicle or any substance, so it can de- tect the vehicle in front.

it

184

If “E3” appears on the display, a system malfunction has been detected. If this code appears, stop your vehicle in a safe place, turn the ignition off, and then restart it to reset the system. If the setting still cannot be made or the same code appears again, the system might have malfunctioned. Although there is no problem to continue driving, please con- tact your Toyota dealer.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

—Conventional (fixed speed) cruise control mode This mode allows you to cruise at a desired speed over about 45 km/h (28
mph) with your foot off the accelerator pedal. Your cruising speed can be maintained up or down grades within the limits of engine performance, although a slight speed change may occur when driving up or down the grades. On steeper hills, a greater speed change will occur so it is better to drive without the cruise control.

CAUTION

(cid:1) In

the conventional

(fixed speed) cruise control mode, the approach warning does not activate and no alarm will sound even if you are too close to the vehicle ahead, as neither the presence of the vehicle ahead nor the vehicle- to- vehicle distance is detected. Pay special attention to the distance between your vehicle and the vehicle ahead. Always confirm the setting in the display.

(cid:1) Do not use the conventional (fixed speed) mode in the following condi- tions, or serious injury or death could result: To help maintain maximum control of your vehicle, do not use conven- tional cruise control mode when us- ing dynamic laser cruise control while driving in heavy or varying traffic, or on slippery (rainy, icy or snow- covered) or winding roads. increasing Avoid when driving downhill. If the vehicle speed is too fast in relation to the the conventional preset speed cruise control mode, cancel the conventional cruise control mode and then downshift the transmis- sion to use engine braking to slow down.

vehicle

speed

in

TURNING THE SYSTEM ON To operate conventional cruise control mode, press the “ON- OFF” button. This turns the system on. The “CRUISE” and “READY” indicator lights in the instrument cluster comes on. Push the lever in the “MODE” direction for longer than 1 second to change to conventional cruise control mode. The instrument cluster is as shown. You can now set your desired cruising speed. Pressing the “ON- OFF” button again will turn the sys- tem completely off.

indicator

the

in

185

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

However, once the vehicle- to- vehicle dis- tance control mode activates and is used, it cannot be changed to the conventional cruise control mode using the above op- eration. To change the mode, press the “ON- OFF” button to turn the system off and then press it again to turn it on. Next push the lever in the “MODE” direction for longer than about 1 second. To change to the vehicle- to- vehicle dis- tance control mode from the conventional cruise control mode, push the lever in the “MODE” direction for longer than about 1
second.

CAUTION

To avoid accidentally engaging cruise control, keep the “ON- OFF” button off when not using dynamic laser cruise control.

186

SETTING THE DESIRED SPEED The transmission must be in the “D” posi- tion, “5” (fifth range) or “4” (fourth range) in sequential mode before you set the cruise control speed in the conventional cruise control mode. Bring your vehicle to the desired speed, push the lever down in the “- SET” direc- tion and release it. This sets the vehicle at that speed and the display shows the preset speed. You can now take your foot off the accelerator pedal.

If you need to accelerate—for example, when passing—depress the accelerator pedal enough for the vehicle to exceed the preset speed. When you release the accelerator pedal, the vehicle will return to the speed set prior to acceleration. You cannot set a desired speed if the master warning light comes on, the alarm sounds and the warning code “E3”. If this code appears see on “VEHICLE- TO- VEHICLE DISTANCE CONTROL MODE FAILURE WARNING” on page 183. CANCELLING THE PRESET SPEED You can cancel the preset speed by doing any of the following: lever a. Pulling

the display

“CANCEL”

indicates

display,

the

the

the

in

direction.

b. Depressing the brake pedal. c. Pressing the “ON- OFF” button.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

In the following cases, the preset speed automatically cancels out: a. The vehicle speed

falls below about

40km/h (25 mph).

b. If the vehicle speed drops 16 km/h (10
mph) below the preset speed, the pre- set speed will also automatically be cancelled.

c. The slip indicator light blinks and an alarm sounds. (This occurs when the vehicle is about to skid.)

is cleared and you must set

If cancelled by a. or b., the preset speed data the speed from the beginning. If the preset speed automatically cancels out for other than the above reasons, do not operate the cruise control. Although it is no problem to continue driving, have your vehicle checked by your Toyota deal- er at the earliest opportunity.

RESETTING TO A FASTER SPEED Push the lever up in the “+ RES” direction and hold it. Release the lever when the desired speed is attained. While the lever is held up, the vehicle will gradually gain speed. When the difference between the actual vehicle speed and the set speed is less than 5 km/h (3 mph), the set speed can be increased 1.6 km/h (1 mph) each time by pushing the lever up in the “+ RES” direction quickly within 0.6 seconds. However, a faster way to reset is to ac- celerate the vehicle and then push the lever down in the “- SET” direction. RESETTING TO A SLOWER SPEED Push the lever down in the “- SET” direc- tion and hold it. Release the lever when the desired speed is attained. While the lever is held down, the vehicle speed will gradually decrease. When the difference between the actual vehicle speed and the set speed is less than 5 km/h (3 mph), the set speed can be lowered 1.6 km/h (1 mph) each time by pushing the lever down in the “- SET” direction quickly within 0.6 seconds.

to a slower speed with

However, a faster way to reset is to ac- celerate the vehicle and then push the lever down in the “- SET” direction. Even if you downshift from “D” position or “5” (fifth range) to “4” (fourth range) in sequential mode in the conventional cruise control mode, engine braking will not be enabled because this mode is not cancel- led. To decrease the vehicle’s speed, re- set the cruise control lever or depress the brake pedal. If you use the brake pedal, cruise control is cancelled. RESUMING THE PRESET SPEED If the preset speed is cancelled by pulling the lever, by depressing the brake pedal or by activating the vehicle stability con- trol system, pushing the lever up in the “+ RES” direction will restore the speed set prior to cancellation.

187

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

is

in

there

trouble

CRUISE

CONTROL

CONVENTIONAL MODE FAILURE WARNING the conventional If cruise control mode, the “CRUISE” indica- tor light in the instrument cluster flashes, the master warning light comes on and the alarm sounds, the warning code “E3” will appear on the display. If a system malfunction is detected when the conventional cruise control mode is in the ready mode or operating, the master warning light comes on, an alarm sounds and the above code appears. If this code appears, press the “ON- OFF” button to turn the system off and then push it again to turn it on. If the setting still cannot be made or the same code appears again, the system might have malfunctioned. Although there is no prob- lem to continue driving, please contact your Toyota dealer.

188

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

SECTION 1- 8

OPERATION OF INSTRUMENTS AND CONTROLS Audio system Reference Using your audio system Audio remote controls Audio system operating hints

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

190
191
215
216

For information about the speech command system of a vehicle equipped with navigation system, please refer to the separate “Navigation System Owner’s Manual”.

189

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

Reference

Type 1: AM·FM radio/compact disc player (with cassette player controller)

Type 2: AM·FM radio/compact disc player with changer (with cassette player con- troller)

Type 3: AM·FM radio/compact disc player with changer (with cassette player and XM satellite radio* controller)

* : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

190

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

Using your audio system— —Some basics This section describes some of the basic features on Toyota audio systems. Some information may not pertain to your sys- tem. Your audio system works when the ignition switch is set at ACC or ON.

OPENING THE AUDIO COVER Push the button to open the audio cover.

to turn on that

TURNING THE SYSTEM ON AND OFF Push “PWR·VOL” to turn the audio system on and off. Push “AM”, “AM/SAT”* , “FM”, “TAPE” or “DISC” function without pushing “PWR·VOL”. You can turn on each player by inserting a cassette tape or compact disc. You can turn off each player by ejecting the cassette tape or compact disc. If the audio system was previously off, then the entire audio system will be turned off when you eject the cassette tape or com- pact disc. If the other function was pre- viously playing, it will come on again. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

SWITCHING BETWEEN FUNCTIONS Push “AM”, “AM/SAT”* , “FM”, “TAPE” or “DISC” if the system is already on but you want to switch from one function to anoth- er. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

191

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

radio, visit XM on

How to subscribe: You must enter into a separate service agreement with the XM radio in order to receive satellite broadcast programming in the vehicle. Additional activation and ser- vice subscription fees apply that are not included in the purchase price of the ve- hicle and optional digital satellite tuner. For complete information on subscription rates and terms, or to subscribe to the XM the web at www.xmradio.com or call an XM’s Listener Care at (800) 852- 9696. The XM radio is solely responsible for the quality, availabil- ity and content of the satellite radio ser- vices provided, which are subject to the terms and conditions of the XM radio cus- tomer service agreement. Customers should have ID ready; the radio ID can be found by tun- ing to “channel 000” on the radio. For details, see “Displaying the radio ID” be- low. All fees and programming are the respon- sibility of the XM satellite radio and are subject to change.

radio

their

LISTENING TO THE XM SATELLITE RADIO BROADCAST* (type 3) To listen to a satellite radio broadcast in your vehicle, an additional genuine Toyota satellite receiver and antenna (or equiva- lents) must be purchased and installed. A subscription to the XM satellite radio ser- vice is also necessary. How to subscribe to an XM satellite radio An XM satellite radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 contiguous states.

192

Satellite tuner technology notice: Toyota’s satellite radio tuners are awarded Type Approval Certificates from XM Satel- lite Radio Inc. on “October 14, 2004” as proof of compatibility with the services of- fered by the XM satellite radio. Displaying the radio ID Each XM tuner is identified with a unique radio ID. You will need the radio ID when activating XM service or when reporting a problem. If you select the “TUNE” knob, the ID code of 8 alphanu- meric characters appears. If you select another channel, display of the ID code is canceled. The channel (000) alternates the display between the radio ID and the spe- cific radio ID code. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

“CH 000” using

the

2005 AVALON from Jan. ’05 Prod. (OM41408U)

license

technologies, under

TONE AND BALANCE For details about your system’s tone and balance controls, see the description of your own system. Type 1 and type 2 audio systems utilize FOCUS(cid:3) and TruBass(cid:3) audio enhance- ment from SRS Labs, Inc., in all mode except AM radio mode. Tone How good an audio program sounds to you is largely determined by the mix of the treble, midrange, and bass levels. In fact, different kinds of music and vocal programs usually sound better with differ- ent mixes of (type 3
only) and bass. Balance A good balance of the left and right stereo channels and of the front and rear sound levels is also important. Keep in mind that if you are listening to a stereo recording or broadcast, changing the right/left balance will increase the vol- ume of one group of sounds while de- creasing the volume of another.

treble, midrange

’05 AVALON_U (L/O 0501)

YOUR RADIO ANTENNA Your vehicle has an antenna printed on the inside of the rear window.

NOTICE

Attaching the film (especially conduc- tive or metallic type) on the rear win- dow will noticeably reduce the sensi- tivity of the radio.

YOUR AUDIO DISPLAY The audio information is displayed on the center display.

193

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

YOUR COMPACT DISC PLAYER (type 1) When you insert a disc, gently push it in with the label side up. The player will play from track 1 through to the end of the disc. Then it will play from track 1 again. The player is intended for use with 12 cm (4.7 in.) discs only.

NOTICE

Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than com- pact discs into the slot.

YOUR COMPACT DISC PLAYER WITH CHANGER (type 2 and 3) When you insert a disc, push the “LOAD” button and gently push the disc in with the label side up. The player will play from track 1 through to the end of the disc. Then it will play from track 1 of the next disc. The changer is intended for use with 12
cm (4.7 in.) discs only.

YOUR CASSETTE PLAYER Push the button to open the cover for the cassette player. When you insert a cassette, the exposed tape should face to the right.

Push the “ ” button to eject a cassette. For instruction the player, see “—Controls and features” described below.

NOTICE

Do not oil any part of the player and do not insert anything other than cas- sette tapes into the slot, or the tape player may be damaged.

194

NOTICE

(cid:1) Do not stack up two discs for in- sertion, or it will cause damage to the compact disc changer. Insert only one compact disc into slot at a time.

(cid:1) Never try to disassemble or oil any part of the compact disc player. Do not insert anything other than com- pact discs into the slot.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

—Controls and features (cid:1)Type 1

Details of specific buttons, controls, and features are described in the alphabetical list that follows.

195

2005 AVALON from Jan. ’05 Prod. (OM41408U)

(See

to preset and

1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset button number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. This radio can store one AM and two FM for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM” or “FM” button.)

(Eject button)

This button is used to eject a compact disc.

196

’05 AVALON_U (L/O 0501)

AUDIO CONT (Tone and sound balance adjustment function) Each time you push the “AUDIO CONT” knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low- pitched tones. The dis- play ranges from -5 to 5. TRE: Adjusts high- pitched tones. The dis- play ranges from -5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. DISC (Compact disc) Push the “DISC” button to play a compact disc. The indicator light will come on. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played.

(Reverse/Fast- forward button)

Cassette player

Push “ ” (preset button 6) to fast- for- ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast- forward- ing, push “ ” or “TAPE” button. To stop the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast- forwards completely, the cassette will play the other side of the tape using the auto- reverse feature. Compact disc player

” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast- forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. The indicator light will come on and “AM” will appear on the display.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

Error messages If the player malfunctions, your audio sys- tem will display one of the six following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up- side down). Clean the disc and re- insert it. “NO DISC”: The compact disc changer of separate unit is empty. Insert a disc. “ERROR 4”: Over- current. Ask your Toyota dealer to inspect. If the malfunction still exists, take your vehicle to your Toyota dealer.

incorrectly

inserted

’05 AVALON_U (L/O 0501)

B NR*

” (preset button 1). “

Dolby(cid:3) If you are listening to a tape that was recorded with Dolby(cid:3) B Noise Reduction, ” will ap- push “ pear on the display. Push the button again to turn off Dolby(cid:3) B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push the “FM” button to turn on the radio and select the FM band. The indicator light will come on and “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM, two for each of the preset button.

feature: After

” indicates the top side, “

PROG (Program) Push “PROG” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto- reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast forwarding. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) Push “RAND” (preset button 3) to listen the tracks on the disc in random order. “RAND” will appear on the display and the player will perform the tracks on the disc you are listening to in random order. To turn off the random feature, push this but- ton again.

197

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will auto- matically rewind and replay. To turn off the repeat feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly. Compact disc player Push “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will auto- matically replay. To the repeat feature, push this button again. SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again.

turn off

198

the

to scan

“SCAN” button

To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again. Compact disc player Push the tracks on a disc. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are listening to. To stop scanning, push this button again. If the player has scanned all the tracks on the disc, it will stop scanning. SEEK (Seeking) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Cassette player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one).

the radio finds and the next station up or down the

the seek mode,

A blank space of at least 3 seconds is considered to be a start of a recording. When the beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape. The indicator light will come on.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

to

to

title,

track

then back

TEXT This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear. TRACK (Tracking up/down) Use this button to skip up or down to a different track. Push “(cid:1)” or “(cid:2)” side of the “TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the beginning of the current track, quickly push the down side of the button one time.

’05 AVALON_U (L/O 0501)

TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency.

199

2005 AVALON from Jan. ’05 Prod. (OM41408U)

(cid:1)Type 2

200

’05 AVALON_U (L/O 0501)

Details of specific buttons, controls, and features are described in the alphabetical list that follows.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

(See

to preset and

1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. This radio can store one AM and two FM for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM” or “FM” button.)

(Eject button)

This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push “(cid:2)” or “(cid:1)” side of the “(cid:2) DISC (cid:1)” button until the number of the disc you want to eject is displayed. Push and release the eject but- ton.

’05 AVALON_U (L/O 0501)

To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.

(Reverse/Fast- forward button)

Cassette player

” (preset button 6) to fast- for- Push “ ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast- forward- ing, push “ ” or “TAPE” button. To stop the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast- forwards completely, the cassette will play the other side of the tape using the auto- reverse feature.

Compact disc player

” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast- forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing. AM Push the “AM” button to turn on the radio and select the AM band. The indicator light will come on and “AM” will appear on the display. AUDIO CONT (Tone and sound balance adjustment function) Each time you push the “AUDIO CONT” knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low- pitched tones. The dis- play ranges from -5 to 5. TRE: Adjusts high- pitched tones. The dis- play ranges from -5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7.

201

2005 AVALON from Jan. ’05 Prod. (OM41408U)

DISC (Compact disc) Push the “DISC” button to play a compact disc. The indicator light will come on. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played. Error messages If the player malfunctions, your audio sys- tem will display one of the six following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up- side down). Clean the disc and re- insert it. “NO DISC”: The compact disc changer of separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over- current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid.

incorrectly

inserted

202

’05 AVALON_U (L/O 0501)

B NR*

If the malfunction still exists, take your vehicle to your Toyota dealer. (cid:2) DISC (cid:1) Use the “(cid:2) DISC (cid:1)” button to select a disc you want to listen to. Push “(cid:2)” or “(cid:1)” side of this button until the number of the disc you want to listen to appears on the display. Dolby(cid:3) If you are listening to a tape that was recorded with Dolby(cid:3) B Noise Reduction, ” will ap- push “ pear on the display. Push the button again to turn off Dolby(cid:3) B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation.

” (preset button 1). “

in

FM Push the “FM” button to turn on the radio and select the FM band. The indicator light will come on and “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM, two for each of the preset button. LOAD This button is used to load the compact discs the compact disc player. This player can store up to six discs. To load one compact disc only, quickly push and release the button, then insert a compact disc. After the disc is loaded, the shutter of the slot will close. If no compact disc is inserted, the shutter will close after 15 seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on), then insert the first compact disc. After the disc is loaded, the shutter of the slot will close. After a few seconds, the shutter will auto- matically open again so the next disc can be inserted. The same process can be applied for loading the rest of the discs. If the player is full of discs, “DISC FULL” will appear on the display.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

” indicates the top side, “

If no compact disc is inserted, the shutter will close after 15 seconds. PROG (Program) Push “PROG” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto- reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast- forwarding. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume.

feature: After

’05 AVALON_U (L/O 0501)

in random order, or

RAND (Random) There are two random features—you can either listen to the tracks on one compact to disc the listen tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset button 3). “RAND” will appear on the dis- play and the player will perform the tracks on the disc you are listening to in random order. To turn off the random feature, push this button again. To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) until you hear a beep. “ ” and “RAND” will appear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the random feature, push this button again.

RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will auto- matically rewind and replay. To turn off the repeat feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly. Compact disc player There are two repeat features—you can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will automatically replay. To turn off feature, push this button again.

the repeat

203

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player has scanned all the tracks on the disc, it will stop scanning. Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a beep. “ ” and “SCAN” will appear on the display and the player will scan the first track of the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.

listening

Repeating a disc: Push and hold “RPT” (preset button 2) ” and “RPT” will until you hear a beep. “ appear on the display. The player will re- peat all the tracks on the disc you are listening to. When the disc ends, the play- er will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again. SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.

204

the seek mode,

(Seeking/Track up or

the radio finds and the next station up or down the

SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. Cassette player Use this button to skip up or down to locate a song or recording. You can select up to nine recordings (in- cluding current one). A blank space of at least 3 seconds is considered to be a start of a recording. When the beginning of a tape is reached, the player automatically resumes play. When the end of the tape is reached, the player automatically reverses sides and resumes normal play. In addition, the feature may not work well with some spoken word, live, or classical recordings.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

Compact disc player Use this button to skip up or down to a different track. the “SEEK/ Push “(cid:1)” or “(cid:2)” side of TRACK” button until the number of the track you want to listen to appears on the display. If you want to return to the begin- ning of the current track, quickly push the down side of the button one time. ST (Stereo reception) display Your radio automatically changes to stereo reception when a stereo broadcast is re- ceived. “ST” appears on the display. If the signal becomes weak, the radio reduces the amount of channel separation to prev- ent the weak signal from creating noise. If the signal becomes extremely weak, the radio switches from stereo to mono recep- tion. TAPE Push the “TAPE” button to play a cassette tape. The indicator light will come on.

to

to

title,

track

then back

TEXT This button is used to change the display for the compact disc that contains text data. To change the display, quickly push and release the “TEXT” button while the com- pact disc is playing. The display changes in the order from the elapsed time to disc title the elapsed time. If this button is pushed while a compact disc that does not contain text data is playing, “NO TITLE” will appear on the display. If the entire disc or track title does not appear on the display, push and hold the button until you hear a beep. The rest of the title will appear. TUNE (Tuning) Turn the “TUNE” knob clockwise to step up the frequency. Turn the knob counter- clockwise to step down the frequency.

205

2005 AVALON from Jan. ’05 Prod. (OM41408U)

(cid:1)Type 3

206

’05 AVALON_U (L/O 0501)

Details of specific buttons, controls and features are described in the alphabetical list that follows.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

(See

to preset and

1 2 3 4 5 6 (Preset buttons) These buttons are used tune in radio stations. To preset a station to a button: Tune in the desired station. “TUNE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the station to the button. The preset but- ton number will appear on the display. To recall a preset station: Push the button for the station you want. The preset but- ton number and station frequency will ap- pear on the display. This radio can store one AM and two FM stations for each button. (The display will show “AM”, “FM1” or “FM2” when you push “AM/SAT” or “FM” button.) XM satellite radio* — These buttons are used tune in radio channels. To preset a channel to a button: Tune in the desired channel. “TUNE” or “SEEK/TRACK”.) Push and hold down the button until you hear a beep—this will set the channel to the button. The preset but- ton number will appear on the display.

to preset and

(See

’05 AVALON_U (L/O 0501)

To recall a preset channel: Push the but- ton for the channel you want. The preset button number and channel number will appear on the display. This radio can store three XM channels for each button. (The display will show “SAT1”, “SAT2” or “SAT3” when you push “AM/SAT” button.) * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

(Eject button)

This button is used to eject one or all compact discs. To eject the current compact disc, push and release the compact disc eject button. To eject a specific disc, push either side of the “DISC/TYPE” button until the num- ber of the disc you want to eject is dis- played. Push and release the eject button. To eject all discs at a time, press and hold the eject button until you hear a beep. The last compact disc played before pushing the button will be ejected first. If the ejected disc is not removed for a long time, the eject function will be cancelled.

(Reverse/Fast- forward button)

Cassette player

Push “ ” (preset button 6) to fast- for- ward a cassette tape. “FF” will appear on the display. Push “ ” (preset button 5) to rewind a tape. “REW” will appear on the display. To stop the tape while it is fast- forward- ing, push “ ” or “TAPE” button. To stop the tape while it is rewinding, push “ ” or “TAPE” button. If a tape rewinds completely, the cassette player will stop and then play that same side. If a tape fast- forwards completely, the cassette will play the other side of the tape using the auto- reverse feature. Compact disc player

” (preset button 6) or Push and hold “ “ ” (preset button 5) to fast- forward or reverse within a compact disc. When you release the button, the compact disc play- er will resume playing.

207

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

to

the radio returns

“OFF AIR”: The channel you selected is not broadcasting any programming. Select another channel. “- - - ”: The channel you selected is no longer available. Wait for about 2 seconds until the previous channel or “CH001”. If it does not change automatically, select another channel. The XM Listener Care Center is also available on the phone, please call (800) 852- 9696 during the following hours: Monday—Saturday: 7 a.m.—1 a.m. Sunday: 12 p.m.—12 a.m. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

“UPDATING”: (cid:2) You have not subscribed to

the XM satellite radio. The radio is being up- dated with the latest encryption code. Contact the XM satellite radio for sub- scription information. When a contact is canceled, you can choose the “CH000” and all free- to- air channels.

(cid:2) The premium channel you selected is not authorized. Wait for about 2 sec- onds until the radio returns to the pre- vious channel or “CH001”. If it does not change automatically, select anoth- er channel. If you want to listen to the premium channel, contact the XM satel- lite radio.

is

“NO SIGNAL”: The XM signal too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. “LOADING”: The unit is acquiring audio or program information. Wait until the unit has received the information.

AM/SAT* (AM and Satellite radio) Push the “AM/SAT” button to turn on the radio and select the AM band. The indica- tor light will come on and “AM” will appear on the display. XM satellite radio— Push the “AM/SAT” button to turn on the radio and select the XM band. “SAT1”, “SAT2” or “SAT3” will appear on the dis- play. This system allows you to set eigh- teen XM channels, three for each of the preset button. Error messages If tuner malfunctions, your audio system will display one of the six following error messages. “ANTENNA”: (cid:2) The XM antenna

is not connected. Check whether the XM antenna cable is attached securely.

the satellite radio

(cid:2) A short- circuit occurs in the antenna or the surrounding antenna cable. See a Toyota certified dealer.

208

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

AUDIO CONT (Tone and sound balance adjustment function) Each time you push the “AUDIO CONT” knob, the mode changes. To adjust the tone and balance, turn the knob. BAS: Adjusts low- pitched tones. The dis- play ranges from -5 to 5. MID: Adjusts mid- pitched tones. The dis- play ranges from -5 to 5. TRE: Adjusts high- pitched tones. The dis- play ranges from -5 to 5. FAD: Adjusts the sound balance between the front and rear speakers. The display ranges from F7 to R7. BAL: Adjusts the sound balance between the right and left speakers. The display ranges from L7 to R7. SURROUND: Turn on or off the surround function. or “SURROUND OFF” on the display. DISC (Compact disc) Push the “DISC” button to play a compact disc. The indicator light will come on. When the audio system is set into com- pact disc operation, the display shows the track, or track and disc number currently being played.

“SURROUND

ON”

inserted

incorrectly

Error messages If the player malfunctions, your audio sys- tem will display one of the six following error messages. “WAIT”: The compact disc player unit may be too hot. Allow the player to cool down. “ERROR 1”: The disc may be dirty, dam- aged or (up- side down). Clean the disc and re- insert it. “NO DISC”: The compact disc changer of separate unit is empty. Insert a disc. “ERROR 3”: There is a problem inside the system. Eject the disc or magazine. Set the disc or magazine again. “ERROR 4”: Over- current. Ask your Toyota dealer to inspect. “CD OPEN”: The compact disc changer lid of separate unit is open. Close the compact disc changer lid. If the malfunction still exists, take your vehicle to your Toyota dealer.

DISC/TYPE Radio When you push the “(cid:1)” or “(cid:2)” side of the “DISC/TYPE” button while receiving an RDS station, the current program type ap- pears on the display. Each time you push “(cid:1)” or “(cid:2)” side of this button, the program type changes as in the following: (cid:2) NEWS (cid:2) SPORTS (cid:2) TALK (cid:2) POP (cid:2) ROCK (cid:2) JAZZ (cid:2) CLASSIC (cid:2) OTHERS (cid:2) INFORM (Information) (cid:2) EASY LIS (Easy listening) (cid:2) CLS/JAZZ (Classical music and Jazz) (cid:2) R&B (Rhythm and Blues) (cid:2) RELIGION (cid:2) ALERT (Emergency message)

209

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

B NR*

” (preset button 1). “

Dolby(cid:3) If you are listening to a tape that was recorded with Dolby(cid:3) B Noise Reduction, ” will ap- push “ pear on the display. Push the button again to turn off Dolby(cid:3) B NR. The Dolby NR mode reduces tape noise by about 10 dB. For best sound reproduc- tion, play your tapes with this button on or off according to the mode used to re- cord the tape. : Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “DOLBY” and the double D symbol are trademarks of Dolby Laboratories Licensing Corporation. FM Push the “FM” button to turn on the radio and select the FM band. The indicator light will come on and “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM stations, two for each of the preset button.

With the program type displayed, push the “SEEK/TRACK” or “SCAN” button. You can seek or scan for the station broad casting the same type of program. XM satellite radio* — When you push the “(cid:2)” or “(cid:1)” side of the “DISC/TYPE” button while receiving a XM channel, the current channel category appears on the display. When the channel category appears, push either “(cid:2)” or “(cid:1)” side of this button to switch to the next or previous category. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

Compact disc player Use the “DISC/TYPE” button to select a disc you want to listen to. Push “(cid:2)” or “(cid:1)” side of the “DISC/TYPE” button until the number of the disc you want to listen appears on the display.

210

in

LOAD This button is used to load the compact discs the compact disc player. This player can store up to six discs. To load one compact disc only, quickly push and release the button, then insert a compact disc. After the disc is loaded, the shutter of the slot will close. If no compact disc is inserted, the shutter will close after 15 seconds. To load multiple compact discs, push and hold the button (until you hear a beep when the audio system is on), then insert the first compact disc. After the disc is loaded, the shutter of the slot will close. After a few seconds, the shutter will auto- matically open again so the next disc can be inserted. The same process can be applied for loading the rest of the discs. If the player is full of discs, “DISC FULL” will appear on the display. If no compact disc is inserted, the shutter will close after 15 seconds.

2005 AVALON from Jan. ’05 Prod. (OM41408U)

feature: After

” indicates the top side, “

PROG (Program) Push “PROG” (preset button 4) to select the other side of a cassette tape. The display indicates which side is currently selected (“ ” indicates the bottom side). Auto- reverse the cassette player reaches the end of a tape side, it automatically reverses and begins to play the other side. This is true whether the cassette was playing or fast- forwarding. PWR·VOL (Power and Volume) Push “PWR·VOL” to turn the audio system on and off. Turn “PWR·VOL” to adjust the volume. RAND (Random) There are two random features—you can either listen to the tracks on one compact to disc listen the tracks on all the compact discs in the magazine in random order. To play the tracks on one disc in random order: Quickly push and release “RAND” (preset button 3). “RAND” will appear on the dis- play and the player will perform the tracks on the disc you are listening to in random order. To turn off the random feature, push this button again.

in random order, or

’05 AVALON_U (L/O 0501)

To play all the tracks in the magazine in random order: Push and hold “RAND” (preset button 1) until you hear a beep. “ ” and “RAND” will appear on the display and the player will perform all the tracks on all the discs in the magazine in random order. To turn off the random feature, push this button again. RDS (Radio Data System) display The radio will automatically switch to the RDS mode to receive an RDS station while turned to FM broadcasts. “RDS” will appear on the display. RPT (Repeat) Cassette player Push “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will auto- matically rewind and replay. To turn off the repeat feature, push this button again. There must be at least 3 seconds of blank space between tracks in order for the re- peat feature to work correctly.

the repeat

Compact disc player There are two repeat features—you can either replay a disc track or a whole com- pact disc. Repeating a track: Quickly push and release “RPT” (preset button 2) while the track is playing. “RPT” will appear on the display. When the track ends, it will automatically replay. To turn off feature, push this button again. Repeating a disc: Push and hold “RPT” (preset button 2) until you hear a beep. “ ” and “RPT” will appear on the display. The player will re- peat all the tracks on the disc you are listening to. When the disc ends, the play- er will automatically go back to the first track on the disc and replay. To turn off the repeat feature, push this button again.

211

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

XM satellite radio* — You can either scan the currently selected channel category or scan only the preset channels for that band. To scan the preset channels: Push and hold the “SCAN” button until you hear a beep. “SCAN” appears on the display. The radio will tune in the next preset channel up the band, stay there for 5 seconds, and then move to the next preset channel. To stop scanning, push this button again. To scan category: Quickly push and release the “SCAN” but- ton. “SCAN” appears on the display. The radio will the same channel category up the band, stay there for 5 seconds, and then scan again. To stop scanning, push this button again. * : Use of satellite radio requires XM tuner and service. Contact your Toyota deal- er for details.

the currently selected channel

the next channel

find

in

SCAN Radio You can either scan all the frequencies on a band or scan only the preset stations for that band. To scan the preset stations: Push and hold the “SCAN” button until you hear a beep. The radio will tune in the next preset station up the band, stay there for 5 seconds, and then move to the next preset station. To stop scanning, push this button again. To scan all the frequencies: Quickly push and release the “SCAN” but- ton. The radio will find the next station up the station band, stay there for 5 seconds, and then scan again to the next station. To stop scanning, push this button again.

212

Compact disc player There are two scan features—you can ei- ther scan the tracks on a specific disc or scan the first tracks of all the discs in the magazine. Scanning the tracks on a disc: Quickly push and release the “SCAN” but- ton. “SCAN” will appear on the display and the player will scan all the tracks on the disc you are to. To stop scanning, push this button again. If the player scanned all the tracks on the disc, it will stop scanning. Scanning the first tracks of all the discs in the magazine: Push the “SCAN” button until you hear a beep. “ ” and “SCAN” will appear on the display and the player will scan the first track on the next disc. To stop scanning, push this button again. If the player has scanned all the discs, it will stop scan- ning.

listening

2005 AVALON from Jan. ’05 Prod. (OM41408U)

’05 AVALON_U (L/O 0501)

the seek mode,

(Seeking/Tracking up or

the radio finds and the next station up or down the

SEEK/TRACK down) Radio In plays station band. To seek the next station, quickly push and release “(cid:1)” or “(cid:2)” side of the “SEEK/ TRACK” button. Do this again to find the station after that. XM satellite radio* — To select the next channel within the cur-