Download PDF Manual


Touch the electronic key to the “ENGINE START STOP” switch while depressing the brake pedal.


■Security feature


If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.


■Battery-saving function


In the following circumstances, the entry function is disabled in order to pre- vent the vehicle battery from discharging and the electronic key battery from depleting. ●When the entry function has not been used for 5 days or more ●When the electronic key has been left within approximately 6 ft. (2 m) of


the vehicle for 10 minutes or more


●If the entry function has not been used for 14 days or more, the vehicle cannot be unlocked by a door other than the driver's door. To unlock the vehicle, grip the driver's door handle or use the wireless remote control or the mechanical key.


The system will resume operation when ●The vehicle is locked using the door handle lock switch when carrying the


electronic key on your person.


●The vehicle is locked/unlocked using the wireless remote control.


(→P. 47)


●The vehicle is locked/unlocked using the mechanical key. (→P. 596)


40


1-2. Opening, closing and locking the doors


■Conditions affecting operation


The smart key system uses weak radio waves. In the following situations, the communication between the electronic key and the vehicle may be affected, preventing the smart key system, wireless remote control and immobilizer system from operating properly. (Way of coping →P. 596) ●When the electronic key battery is depleted ●Near a TV tower, electric power plant, gas station, radio station, large dis- play, airport or other facility that generates strong radio waves or electri- cal noise


●When carrying a portable radio, mobile phone, cordless phone or other


wireless communication device


●When the electronic key is in contact with, or is covered by the following


metallic objects • Cards to which aluminum foil is attached • Cigarette boxes that have aluminum foil inside • Metallic wallets or bags • Coins • Hand warmers made of metal • Media such as CDs and DVDs


●When multiple electronic keys are in the vicinity ●When other wireless keys (that emit radio waves) are being used nearby ●When carrying the electronic key together with the following devices that


emit radio waves • Another vehicle's electronic key or a wireless key that emits radio


waves


• Personal computers or personal digital assistants (PDAs) • Digital audio players • Portable game systems


●If window tint with a metallic content or metallic objects are attached to


the back window


41


1-2. Opening, closing and locking the doors


■Note for the entry function


●Even when the electronic key is within the effective range (detection


areas), the system may not operate properly in the following cases: • The electronic key is too close to the window or outside door handle, near the ground, or in a high place when the doors are locked or unlocked.


• The electronic key is on the instrument panel or floor, in the glove box,


or in the auxiliary box of the instrument panel.


●As long as the electronic key is within the effective range, the doors may be locked or unlocked by anyone. However, only the doors detecting the electronic key can be used to unlock the vehicle.


●The doors may lock or unlock if the electronic key is within the effective range and a large amount of water splashes on the door handle, such as in the rain or in a car wash. The doors will automatically be locked after approximately 60 seconds if a door is not opened and closed.


●If the wireless remote control is used to lock the doors when the elec- tronic key is near the vehicle, there is a possibility that the door may not be unlocked by the entry function. (Use the wireless remote control to unlock the doors.)


■Notes for locking the doors


●Touching the door lock sensor while wearing gloves may delay or prevent


lock operation. Remove the gloves and touch the lock sensor again.


●When the lock operation is performed using the lock sensor, recognition signals will be shown up to two consecutive times. After this, no recogni- tion signals will be given.


●If the door handle becomes wet while the electronic key is within the effective range, the door may lock and unlock repeatedly. Place the key in a position 6 ft. (2 m) or more separate from the vehicle while the vehi- cle is being washed. (Take care to ensure that the key is not stolen.)


●If the electronic key is inside the vehicle and a door handle becomes wet during a car wash, a buzzer will sound outside the vehicle. To turn off the alarm, lock all the doors.


42


1-2. Opening, closing and locking the doors


●The lock sensor may not work properly if it comes into contact with ice, snow, mud, etc. Clean the lock sensor and attempt to operate it again, or use the lock sensor on the lower part of the door handle.


●Fingernails may scrape against the door during operation of the door handle. Be careful not to injure fingernails or damage the surface of the door.


■Notes for the unlocking function


●Gripping the door handle when wearing a glove may not unlock the door. ●A sudden approach to the effective range or door handle may prevent the doors from being unlocked. In this case, return the door handle to the original position and check that the doors unlock before pulling the door handle again.


●If there is another electronic key in the detection area, it may take slightly


longer to unlock the doors after the door handle is gripped.


■When the vehicle is not driven for extended periods


To prevent theft of the vehicle, do not leave the electronic key within 6 ft. (2
m) of the vehicle.


■To operate the system properly


Make sure to carry the electronic key when operating the system. Do not get the electronic key too close to the vehicle when operating the system from the outside of the vehicle. Depending on the position and holding condition of the electronic key, the key may not be detected correctly and the system may not operate properly. (The alarm may go off accidentally, or the door lock prevention function may not operate.)


■If the smart key system does not operate properly


●Locking and unlocking the doors: Use the mechanical key. (→P. 596) ●Starting the engine: →P. 597


43


1-2. Opening, closing and locking the doors


■Electronic key battery depletion


●The standard battery life is 1 to 2 years. ●As the electronic key always transmits radio waves, the battery will become depleted even if the electronic key is not used. The following symptoms indicate that the electronic key battery may be depleted. Replace the battery when necessary. (→P. 528) • The smart key system or the wireless remote control does not operate. • The detection area becomes smaller. • The LED indicator on the key surface does not turn on.


●To avoid serious deterioration, do not leave the electronic key within 3 ft. (1 m) of the following electrical appliances that produce a magnetic field: • TVs • Personal computers • Cellular phones, cordless phones and battery chargers • Recharging cellular phones or cordless phones • Glass top ranges • Table lamps


■Precautions when disconnecting the battery


●In some cases, it may not be possible to unlock the doors using the smart key system immediately after the battery has been disconnected. Use the wireless remote control or the mechanical key to lock or unlock the doors.


●The engine may not start on the first attempt after reconnecting the bat- tery but will start normally after the second attempt. This is not a malfunc- tion.


●The “ENGINE START STOP” switch mode is memorized by the vehicle. When the battery is reconnected, the system will return to the mode it was in before the battery was disconnected. Before disconnecting the battery, turn the “ENGINE START STOP” switch off.


If you are unsure what mode the “ENGINE START STOP” switch was in when the battery was disconnected, be especially careful when reconnect- ing the battery.


44


1-2. Opening, closing and locking the doors


■When the electronic key battery is fully depleted


→P. 528


■Customization that can be configured at Toyota dealer


Settings (e.g. smart key system) can be changed. (Customizable features →P. 638)


■Certification for the smart key system


For vehicles sold in the U.S.A. FCC ID: NI4TMIMB-2
FCC ID: NI4TMLF8-14
FCC ID: HYQ14ACX FCC ID: HYQ13CZD FCC ID: HYQ14ADF FCC ID: HYQ13CZE NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


45


1-2. Opening, closing and locking the doors


CAUTION


■Caution regarding interference with electronic devices


●People with implanted pacemakers or cardiac defibrillators should keep


away from the smart key system antennas. (→P. 36) The radio waves may affect the operation of such devices. If necessary, the entry function can be disabled. Ask your Toyota dealer for details, such as the frequency of radio waves and timing of emitting the radio waves. Then, consult your doctor to see if you should disable the entry function.


●Users of any electrical medical device other than implanted pacemakers and implanted cardiac defibrillators should consult the manufacturer of the device for information about its operation under the influence of radio waves. Radio waves could have unexpected effects on the operation of such medical devices.


Ask your Toyota dealer for details on disabling the entry function.


46


1-2. Opening, closing and locking the doors Wireless remote control


The wireless remote control can be used to lock and unlock the vehi- cle. Vehicles without a smart key system


CTH12AS045


Vehicles with a smart key system


CTH12AS046


Locks all the doors Sounds the alarm (press and hold) (→P. 48) Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Opens the windows and moon roof (press and hold)* *: This setting must be custom-


ized at your Toyota dealer.


Locks all the doors Unlocks all the doors Pressing the button unlocks the driver’s door. Pressing the button again within 3 seconds unlocks the other doors. Opens the windows and moon roof (press and hold)* Sounds the alarm (press and hold) (→P. 48)


*: This setting must be custom-


ized at your Toyota dealer.


47


1-2. Opening, closing and locking the doors


■Operation signals


A buzzer sounds and the emergency flashers flash to indicate that the doors have been locked/unlocked. (Locked: once; Unlocked: twice)


■Door lock buzzer


If an attempt to lock the doors is made when a door is not fully closed, a buzzer sounds continuously. Fully close the door to stop the buzzer, and lock the vehicle once more.


■Panic mode


Vehicles without a smart key system


Vehicles with a smart key system


When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the wireless remote control.


When is pressed for longer than about one second, an alarm will sound intermittently and the vehicle lights will flash to deter any person from trying to break into or damage your vehicle. To stop the alarm, press any button on the electronic key.


■Security feature


If a door is not opened within approximately 60 seconds after the vehicle is unlocked, the security feature automatically locks the vehicle again.


■Alarm


Using the wireless remote control to lock the doors will set the alarm system. (→P. 109)


48


1-2. Opening, closing and locking the doors


■Conditions affecting operation


Vehicles without a smart key system The wireless remote control function may not operate normally in the follow- ing situations: ●Near a TV tower, radio station, electric power plant, airport or other facil-


ity that generates strong radio waves


●When carrying a portable radio, cellular phone or other wireless commu-


nication devices


●When multiple wireless keys are in the vicinity ●When the wireless key is in contact with, or is covered by, a metallic


object


●When a wireless key (that emits radio waves) is being used nearby ●When the wireless key has been left near an electrical appliance such as


a personal computer


Vehicles with a smart key system →P. 41


■If the wireless remote control does not operate properly (vehicles with


a smart key system) Locking and unlocking the doors: Use the mechanical key. (→P. 596)


■Key battery depletion


Vehicles without a smart key system If the wireless remote control function does not operate, the battery may be depleted. Replace the battery when necessary. (→P. 528) Vehicles with a smart key system →P. 44


■When the electronic key battery is fully depleted


→P. 528


■When riding in an aircraft


When bringing a key with wireless remote control function onto an aircraft, make sure you do not press any buttons on the key while inside the aircraft cabin. If you are carrying the key in your bag etc, ensure that the buttons are not likely to be pressed accidentally. Pressing a button may cause the key to emit radio waves that could interfere with the operation of the aircraft.


49


1-2. Opening, closing and locking the doors


■Customization that can be configured at Toyota dealer


Settings (e.g. wireless remote control system) can be changed. (Customizable features →P. 638)


■Certification for wireless remote control


For vehicles sold in the U.S.A. FCC ID: HYQ14ACX FCC ID: HYQ13CZD FCC ID: HYQ14ADF FCC ID: HYQ13CZE FCC ID: HYQ12BBY FCC ID: HYQ13BDC NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. For vehicles sold in Canada NOTE: Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.


50


1-2. Opening, closing and locking the doors Side doors


The vehicle can be locked and unlocked using the entry function, wireless remote control, key or door lock switch. ■ Entry function (vehicles with a smart key system)


→P. 33


■ Wireless remote control


→P. 47


■ Key Turning the key operates the doors as follows: Vehicles without a smart key system


Locks all the doors Unlocks all the doors Turning the key unlocks the driver's door. Turning the key again unlocks the other doors.


Vehicles with a smart key system The doors can also be locked and unlocked with the mechanical key. (→P. 596)


51


1-2. Opening, closing and locking the doors


■ Door lock switch


Locks all the doors Unlocks all the doors


■ Inside lock buttons


CTH12AS013


Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.


CTH12AS014


Locking the doors from the outside without a key


STEP 1


STEP 2


Move the inside lock button to the lock position. Close the door.


Vehicles without a smart key system


The door cannot be locked if either of the front doors is open and the key is in the engine switch.


Vehicles with a smart key system


The door cannot be locked if the “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode, or the electronic key is left inside the vehicle. The key may not be detected correctly and the door may be locked.


52


Rear door child-protector lock


1-2. Opening, closing and locking the doors


The door cannot be opened from inside the vehicle when the lock is set.


These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.


CTH12AS015


Automatic door locking and unlocking systems


The following functions can be set or canceled:


Function


Shift position linked door locking function Shift position linked door unlocking function


Speed linked door lock- ing function


Driver's door linked door unlocking function (vehicles without a smart key system) Driver's door linked door unlocking function (vehicles with a smart key system)


Operation


Shifting the shift lever out of P locks all the doors. Shifting the shift lever to P unlocks all the doors. All the doors are locked when the vehicle speed is approximately 12 mph (20 km/h) or higher.


All the doors are unlocked when the driver's door is opened within 10 seconds after turning the engine switch to “ACC” or “LOCK”.


All the doors are unlocked when the driver's door is opened within 10 seconds after turning the “ENGINE START STOP” switch off.


53


1-2. Opening, closing and locking the doors


■ Setting and canceling the functions


To switch between setting and canceling, follow the procedure below:


STEP 1


STEP 2


Vehicles without a smart key system Close all the doors and turn the engine switch to the “ON” position. (Perform step 2 within 20 seconds.) Vehicles with a smart key system Close all the doors and turn the “ENGINE START STOP” switch to IGNITION ON mode. (Perform step 2 within 20 sec- onds.)


Shift the shift lever to P or N, and press and hold the driver's door lock for approximately 5 seconds and then release.


switch


or


CTH12AS016


to


corresponding


The shift lever and switch posi- tions the desired function to be set are shown in the following table. Use the same procedure to can- cel the function.


Function


Shift lever position


Driver’s door lock switch position


Shift position linked door lock- ing function Shift position linked door unlocking function Speed linked door locking func- tion Driver's door linked door unlock- ing function


54


1-2. Opening, closing and locking the doors


When the setting or canceling operation is complete, all the doors are locked and then unlocked.


■Using the mechanical key (vehicles with a smart key system)


The doors can also be locked and unlocked with the mechanical key. (→P. 596)


■Customization that can be configured at Toyota dealer


Settings (e.g. door unlocking function) can be changed. (Customizable features →P. 638)


CAUTION


■To prevent an accident


Observe the following precautions while driving the vehicle. Failure to do so may result in a door opening and an occupant falling out, resulting in death or serious injury. ●Always use a seat belt. ●Always lock all the doors. ●Ensure that all doors are properly closed. ●Do not pull the inside handle of the doors while driving.


The doors may be opened and the passengers are thrown out of the vehi- cle and it may result in serious injury or death. Be especially careful for the front doors, as the doors may be opened even if the inside lock buttons are in locked position.


●Set the rear door child-protector locks when children are seated in the rear


seats.


55


1-2. Opening, closing and locking the doors Back door


The back door can be locked/unlocked and opened by the following procedures: ■ Locking and unlocking the back door Entry function (vehicles with a smart key system) →P. 34
Wireless remote control →P. 47
Door lock switch →P. 52
Keys (vehicles without a smart key system)


the back window


Unlocks all the doors Opens (turn and hold) (→P. 94) Locks all the doors Closes (turn and hold) (→P. 94)


the back window


CTH12AS018


■ Opening the back door from outside the vehicle Back door opener


Raise the back door while pushing up the back door opener switch.


CTH12AS038


56


Rear step bumper


1-2. Opening, closing and locking the doors


rear step bumper


The is intended for rear end protection and easier step-up loading.


CTH12AS019


■When closing the back door


Lower the back door using the back door handle, and make sure to push the back door down from the outside to close it.


■Luggage compartment lights


CTH12AS029


Each luggage compartment light has the following 3 positions:


Turns the light off Turns the light on Turns the light on/off linked to back door position


CTH12AS033


If the luggage compartment lights remain on when the back door is not fully closed and the luggage compartment light switch is in the “DOOR” position, the lights will go off automatically after 20 minutes.


■If the back door opener is inoperative or the battery is discharged


→P. 595


57


1-2. Opening, closing and locking the doors


CAUTION


■Caution while driving


●Keep the back door closed.


If the back door is left open, it may hit nearby objects while driving or lug- gage may be unexpectedly thrown out, causing an accident. In addition, exhaust gases may enter the vehicle, causing death or a seri- ous health hazard. Make sure to close the back door before driving.


●Before driving the vehicle, make sure that the back door is fully closed. If the back door is not fully closed, it may open unexpectedly while driving, causing an accident.


●Never let anyone sit in the luggage compartment. In the event of sudden


braking or a collision, they are susceptible to death or serious injury.


●Do not get on the rear step bumper.


■When children are in the vehicle Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not leave children alone in the luggage compartment.


If a child is accidentally locked in the luggage compartment, they could have heat exhaustion.


●Do not allow a child to open or close the back door.


Doing so may cause the back door to operate unexpectedly, or cause the child’s hands, head, or neck to be caught by the closing back door, which may result in death or serious injury of the child.


■Operating the back door


Observe the following precautions. Failure to do so may cause parts of the body to be caught, resulting in seri- ous injury. ●Remove any heavy loads, such as snow and ice, from the back door before opening it. Failure to do so may cause the back door to fall closed again after it is opened.


58


1-2. Opening, closing and locking the doors


CAUTION


●When opening or closing the back door, thoroughly check to make sure


the surrounding area is safe.


●If anyone is in the vicinity, make sure they are safe and let them know that


the back door is about to open or close.


●Use caution when opening or closing the back door in windy weather as it


may move abruptly in strong wind.


●The back door may fall if it is not opened fully. It is more difficult to open or close the back door on an incline than on a level surface, so beware of the back door unexpectedly opening or closing by itself. Make sure that the back door is fully open and secure before using the luggage compartment. ●When closing the back door, take extra care to prevent your fingers etc. from being caught.


●When closing the back door, make sure to press it lightly on its outer surface. If the back door handle is used to fully close the back door, it may result in hands or arms being caught.


CTH12AS035


CTH12AS037


●Do not pull on the back door damper stay to close the back door, and do


not hang on the back door damper stay. Doing so may cause hands to be caught or the back door damper stay to break, causing an accident.


●Do not attach any accessories other than genuine Toyota parts to the back door. Such additional weight on the back door may cause the back door to fall closed again after it is opened.


59


1-2. Opening, closing and locking the doors


NOTICE


■To prevent damage to the back door components


Do not allow more than one person to get on the rear step bumper at a time.


■Back door damper stays


The back door is equipped with damper stays that hold the back door in place. Observe the following precautions. Failure to do so may cause damage to the back door damper stay, resulting in malfunction.


●Do not attach any foreign objects, such as stickers, plastic sheets, or adhesives to the damper stay rod.


●Do not touch the damper stay rod with


gloves or other fabric items.


●Do not attach any accessories other than genuine Toyota parts to the back door.


●Do not place your hand on the damper


stay or apply lateral forces to it.


CTH12AS036


60


1-3. Adjustable components (seats, mirrors, steering wheel) Front seats


Manual seat


Seat position adjustment lever Vertical height adjustment lever (driver’s side only) Seatback angle adjustment lever Lumber support adjustment switch (driver’s side only)


CTH13AS055


61


1-3. Adjustable components (seats, mirrors, steering wheel)


Power seat


Seat position adjustment switch Seatback angle adjustment switch Seat cushion (front) angle adjustment switch (driver’s side only) Vertical height adjustment switch (driver’s side only) Lumber support adjustment switch (driver’s side only)


Active head restraints


CTH13AS010


CTH13AS011


When the occupant’s lower back presses against the seatback during a rear-end collision, the head restraint moves slightly for- ward and upward to help reduce the risk of whiplash to the seat occupant.


62


1-3. Adjustable components (seats, mirrors, steering wheel)


■The auto away function for exiting the driver seat


If the seat is already close to the rearmost position, the auto away function may not operate when the driver exits the vehicle.


■Active head restraints


Even small forces applied to the seatback may cause the head restraint to move. Pushing up a locked head restraint forcibly may appear the head restraint inner structure. These do not indicate problems.


During rear-end collision


Inner structure


CTH13AS012


63


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


■Seat adjustment


●To reduce the risk of sliding under the lap belt during a collision, do not


recline the seat more than necessary. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoulder belt, increasing the risk of death or serious injury in the event of an accident. Adjustments should not be made while driving as the seat may unexpect- edly move and cause the driver to lose control of the vehicle.


●After adjusting the seat, make sure that the seat is locked in position.


64


1-3. Adjustable components (seats, mirrors, steering wheel) Rear seats


Vehicles without third row seats ■ Rear seat


Pull up the seatback angle adjustment lever until the lock is released.


CTH13AS013


65


1-3. Adjustable components (seats, mirrors, steering wheel)


Vehicles with third row seats ■ Second row seats


Seat position adjustment lever Seatback angle adjustment lever


■ Third row seats


CTH13AS053


The third row seats do not have a seat adjustment function.


66


1-3. Adjustable components (seats, mirrors, steering wheel)


Folding down the rear seats (vehicles without third row seats)


■ Before folding down the rear seats


Adjust the head restraints to the downmost position.


CTH13AS014


Stow the rear seat belt buckles.


CTH13AS070


67


1-3. Adjustable components (seats, mirrors, steering wheel)


■ Folding down the rear seats


Swing the bottom cushions up by pulling the lock release strap.


When returning the rear seat cushions to their original posi- tions, make sure they are locked securely.


CTH13AS016


Push the lock release button and fold down the seatbacks.


To return the rear seatbacks to their original positions, lift them up until they lock.


■ Folding down rear center seatback only


CTH13AS065


Pull the center seatback angle lever behind the seatback and fold the seatback down.


To return the rear center seatback to its original position, lift it up until it locks.


CTH13AS022


68


1-3. Adjustable components (seats, mirrors, steering wheel)


Folding down the second row seats (vehicles with third row seats)


■ Before folding down the second row seats


STEP 1


STEP 2


Adjust the head restraints to the downmost position.


CTH13AS045


Stow the second row seat belt buckles.


CTH13AS071


69


1-3. Adjustable components (seats, mirrors, steering wheel)


■ Folding down the second row seats


Pull the seatback lock release lever and the seatback down.


fold


To return the second row seat- backs to their original positions, lift them up until they lock.


■ Folding down the second row center seatback only


CTH13AS051


Pull the center seatback angle lever behind the seatback and fold the seatback down.


To return the second row center seatback to its original position, lift it up until it locks.


CTH13AS052


70


1


1-3. Adjustable components (seats, mirrors, steering wheel)


Moving a second row seat for access to the third row seats (vehicles with third row seats)


■ Getting in the vehicle (right side only)


Pull up the lever and fold down the seatback. The seat will slide forward. Move the seat to the front-most position.


■ Getting out of the vehicle (right side only)


CTH13AS057


Lift the lever on the back of the seatback and fold down the seat- back. The seat will slide forward. Move the seat to the front-most position.


CTH13AS058


■ After passengers have entered/exited the vehicle


Lift up the seatback and slide the seat backward until it locks.


71


1-3. Adjustable components (seats, mirrors, steering wheel)


Folding down the third row seats (vehicles with third row seats)


■ Before folding down the third row seats


Pass the seat belts through the seat belt hangers and secure the seat belt plates.


This prevents the shoulder belts from being damaged. Make sure that the seat belts are removed from the hangers before using them.


CTH13AS072


■ Folding down the third row seats From inside


STEP 1


Pull the strap to fold down the head restraint.


STEP 2


CTH13AS025


Pull the lever up.


The seat cushion will slide back- ward.


CTH13AS026


72


1-3. Adjustable components (seats, mirrors, steering wheel)


STEP 3


Pull the lever to unlock the seat- back and then fold the seatback down.


CTH13AS027


From outside


STEP 1


Pull the strap to fold down the head restraint.


STEP 2


CTH13AS028


Pull the lever up.


The seat cushion will slide back- ward and the seatback will be unlocked.


STEP 3


Fold the seatback down.


CTH13AS029


CTH13AS064


73


1-3. Adjustable components (seats, mirrors, steering wheel)


■ Returning the third row seats


As the seat cushions cannot be pulled forward from outside, this operation can only be performed from inside.


STEP 1


Raise the seatbacks to their orig- inal positions. Make sure securely.


they are


locked


STEP 2


Pull the seat cushions forward.


CTH13AS061


STEP 3


Raise the head restraints.


CTH13AS062


CTH13AS063


74


1


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


■When folding the rear seatbacks down


Observe the following precautions. Failure to do so may result in death or serious injury. ●Do not fold the seatbacks down while driving. ●Stop the vehicle on level ground, set the parking brake and shift the shift


lever to P.


●Do not allow anyone to sit on a folded seatback or in the luggage compart-


ment while driving.


●Do not allow children to enter the luggage compartment.


■Seat adjustment


To reduce the risk of sliding under the lap belt during a collision, do not recline the seat more than necessary. If the seat is too reclined, the lap belt may slide past the hips and apply restraint forces directly to the abdomen, or your neck may contact the shoul- der belt, increasing the risk of death or serious injury in the event of an acci- dent. Adjustments should not be made while driving as the seat may unexpectedly move and cause the driver to lose control of the vehicle.


■After returning the rear seatback to the upright position


Observe the following precautions. Failure to do so may result in death or serious injury. ●Make sure the seatback is securely locked by pushing it forward and rear-


ward on the top.


●Check that the seat belts are not twisted or caught in the seatback.


NOTICE


■Stowing the seat belts


The seat belts and the buckles must be stowed before you fold down the rear seatbacks.


75


1-3. Adjustable components (seats, mirrors, steering wheel) Head restraints


Head restraints are provided for all seats. Front and second seats


Lock release button


Up Pull the head restraints up. Down Push the head restraint down while pushing the lock release button.


CTH13AS031


Third seats (vehicles with third row seats) To use To fold


CTH13AS034


76


1-3. Adjustable components (seats, mirrors, steering wheel)


■Removing the head restraints (except third row seats)


Pull the head restraint up while pressing the lock release button.


■Installing the head restraints (except third row seats)


CTH13AS036


Align the head restraint with the installa- tion holes and push it down to the lock position. Press and hold the lock release button when lowering the head restraint.


■Adjusting the height of the head restraints


CTH13AS037


Make sure that the head restraints are adjusted so that the center of the head restraint is closest to the top of your ears.


CTH13AS035


■Adjusting the second center seat head restraint


Always raise the head restraint one level from the stowed position when using.


77


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


■Head restraint precautions


Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury. ●Use the head restraints designed for each respective seat. ●Adjust the head restraints to the correct position at all times. ●After adjusting the head restraints, push down on them and make sure


they are locked in position.


●Do not drive with the head restraints removed.


78


1-3. Adjustable components (seats, mirrors, steering wheel) Seat belts


Make sure that all occupants are wearing their seat belts before driv- ing the vehicle. ■ Correct use of the seat belts


● Extend the shoulder belt so that it comes fully over the shoulder, but does not come into contact with the neck or slide off the shoul- der.


● Position the lap belt as low


as possible over the hips.


● Adjust the position of the seatback. Sit up straight and well back in the seat. ● Do not twist the seat belt.


CTH13AS038


■ Fastening and releasing the seat belt


To fasten the seat belt, push the plate into the buckle until a click sound is heard. To release the seat belt, press the release button.


Release button


CTH13AS039


79


1-3. Adjustable components (seats, mirrors, steering wheel)


■ Adjusting the seat belt shoulder anchor height (front seats) Push the seat belt shoulder anchor down while pressing the release button. Push the seat belt shoulder anchor up. Move the height adjuster up and down as needed until you hear a click.


CTH13AS040


Seat belt pretensioners (front seats)


The pretensioner helps the seat belt to quickly restrain the occu- pant by retracting the seat belt when the vehicle is subjected to certain types of severe frontal and side collision or a vehicle rollover.


The pretensioner may not acti- vate in the event of a minor frontal or side impact or a rear impact.


CTH13AS041


80


1-3. Adjustable components (seats, mirrors, steering wheel)


■Emergency locking retractor (ELR)


The retractor will lock the belt during a sudden stop or on impact. It may also lock if you lean forward too quickly. A slow, easy motion will allow the belt to extend so that you can move around fully.


■Automatic locking retractor (ALR)


When a passenger's shoulder belt is completely extended and then retracted even slightly, the belt is locked in that position and cannot be extended. This feature is used to hold the child restraint system (CRS) firmly. To free the belt again, fully retract the belt and then pull the belt out once more. (→P. 139)


■Pregnant women


Obtain medical advice and wear the seat belt in the proper way. (→P. 79) Women who are pregnant should position the lap belt as low as possible over the hips in the same manner as other occu- pants. Extend the shoulder belt com- pletely over the shoulder and position the belt across the chest. Avoid belt contact over the rounding of the abdominal area. If the seat belt is not worn properly, not only the pregnant woman, but also the fetus could suffer death or serious injury as a result of sudden braking or a colli- sion.


CTH13AS042


■People suffering illness


Obtain medical advice and wear the seat belt in the proper way. (→P. 79)


81


1-3. Adjustable components (seats, mirrors, steering wheel)


■Child seat belt usage


The seat belts of your vehicle were principally designed for persons of adult size. ●Use a child restraint system appropriate for the child, until the child becomes large enough to properly wear the vehicle’s seat belt. (→P. 135) ●When the child becomes large enough to properly wear the vehicle’s


seat belt, follow the instructions on P. 79 regarding seat belt usage.


■Replacing the belt after the pretensioner has been activated


If the vehicle is involved in multiple collisions, the pretensioner will activate for the first collision, but will not activate for the second or subsequent colli- sions.


■Seat belt extender


If your seat belts cannot be fastened securely because long enough, a personalized seat belt extender is available from your Toyota dealer free of charge.


they are not


CTH13AS044


82


1


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


■Wearing a seat belt


Observe the following precautions to reduce the risk of injury in the event of sudden braking, sudden swerving or an accident. Failure to do so may cause death or serious injury. ●Ensure that all passengers wear a seat belt. ●Always wear a seat belt properly. ●Each seat belt should be used by one person only. Do not use a seat belt


for more than one person at once, including children.


●Toyota recommends that children be seated in the rear seat and always


use a seat belt and/or an appropriate child restraint system.


●To achieve a proper seating position, do not recline the seat more than necessary. The seat belt is most effective when the occupants are sitting up straight and well back in the seats.


●Do not wear the shoulder belt under your arm. ●Always wear your seat belt low and snug across your hips.


■Seat belt pretensioners


●Do not place anything, such as a cushion, on the front passenger's seat. Doing so will disperse the passenger's weight, which prevents the sensor from detecting the passenger's weight properly. As a result, the seat belt pretensioner for the front passenger's seat may not activate in the event of a collision.


●If the pretensioner has activated, the SRS warning light will come on. In that case, the seat belt cannot be used again and must be replaced at your Toyota dealer.


■Adjustable shoulder anchor


Always make sure the shoulder belt is positioned across the center of your shoulder. The belt should be kept away from your neck, but not falling off your shoulder. Failure to do so could reduce the amount of protection in an accident and cause death or serious injuries in the event of a sudden stop, sudden swerve or accident. (→P. 80)


83


1-3. Adjustable components (seats, mirrors, steering wheel)


CAUTION


■Child restraint lock function belt precaution


Do not allow children to play with the child restraint lock function belt. If the belt becomes twisted around a child’s neck, it will not be possible to pull the belt out leading to choking or other serious injuries that could result in death. If this occurs and the buckle cannot be unfastened, scissors should be used to cut the belt.


■Seat belt damage and wear


●Do not damage the seat belts by allowing the belt, plate, or buckle to be


jammed in the door.


●Inspect the seat belt system periodically. Check for cuts, fraying, and loose parts. Do not use a damaged seat belt until it is replaced. Damaged seat belts cannot protect an occupant from death or serious injury.


●Ensure that the belt and plate are locked and the belt is not twisted.


If the seat belt does not function correctly, immediately contact your Toyota dealer.


●Replace the seat assembly, including the belts, if your vehicle has been


involved in a serious accident, even if there’s no obvious damage.


●Do not attempt to install, remove, modify, disassemble or dispose of the seat belts. Have any necessary repairs carried out by your Toyota dealer. Inappropriate handling of the pretensioner may prevent it from operating properly, resulting in death or serious injury.


■Using a seat belt extender


●Do not wear the seat belt extender if you can fasten the seat belt without


the extender.


●Do not use the seat belt extender when installing a child restraint system because the belt will not securely hold the child restraint system, increas- ing the risk of death or serious injury in the event of an accident.


●The personalized extender may not be safe on another vehicle, when used by another person, or at a different seating position other than the one originally intended.


84


1-3. Adjustable components (seats, mirrors, steering wheel)


NOTICE


■When using a seat belt extender


When releasing the seat belt, press on the buckle release button on the extender, not on the seat belt. This helps prevent damage to the vehicle interior and the extender itself.


85


1-3. Adjustable components (seats, mirrors, steering wheel) Steering wheel


The steering wheel can be adjusted to a comfortable position.


STEP 1


STEP 2


Hold the steering wheel and push the lever down.


CTH13AS007


CTH13AS008


Adjust to the ideal position by moving the steering wheel horizontally and vertically.


After adjustment, pull the lever up the steering wheel.


to secure


CAUTION


■Caution while driving


Do not adjust the steering wheel while driving. Doing so may cause the driver to mishandle the vehicle and cause an acci- dent, resulting in death or serious injury.


■After adjusting the steering wheel


Make sure that the steering wheel is securely locked. Otherwise, the steering wheel may move suddenly, possibly causing an accident, and resulting in death or serious injury.


86


1-3. Adjustable components (seats, mirrors, steering wheel) Inside rear view mirror


Glare from the headlights of vehicles behind can be reduced by using the following functions: Manual anti-glare inside rear view mirror (if equipped)


Normal position Anti-glare position


Auto anti-glare inside rear view mirror (if equipped)


CTH13AS001


In automatic mode, sensors are used to detect the headlights of vehicles behind and the reflected light is automatically reduced.


CTH13AS054


Turns automatic mode on/off


The indicator comes on when automatic mode is turned on. Vehicles without a smart key system The mirror will revert to the automatic mode each time the engine switch is turned to the “ON” position. Vehicles with a smart key system The mirror will revert to the automatic mode each time the “ENGINE STOP” switch is turned to IGNITION ON mode.


START


87


1-3. Adjustable components (seats, mirrors, steering wheel)


■To prevent sensor error (vehicles with auto anti-glare inside rear view


mirror)


To ensure that the sensors operate prop- erly, do not touch or cover them.


CTH13AS047


CAUTION


■Caution while driving


Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury.


88


1-3. Adjustable components (seats, mirrors, steering wheel) Outside rear view mirrors


Mirror angle can be adjusted using the switch.


STEP 1


STEP 2


To select a mirror to adjust, press the switch.


Left Right


CTH13AS004


To adjust the mirror, press the switch.


Up Right Down Left


CTH13AS005


Folding the mirrors


Push the mirror back in the direc- tion of the vehicle's rear.


CTH13AS006
CTH13AS066


89


1-3. Adjustable components (seats, mirrors, steering wheel)


■Mirror angle can be adjusted when


Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.


■When the mirrors are fogged up


Turn on the mirror defoggers to defog the mirrors. (→P. 310)


CAUTION


■When driving the vehicle


Observe the following precautions while driving. Failure to do so may result in loss of control of the vehicle and cause an accident, resulting in death or serious injury. ●Do not adjust the mirrors while driving. ●Do not drive with the mirrors folded. ●Both the driver and passenger side mirrors must be extended and properly


adjusted before driving. ■When a mirror is moving


To avoid personal injury and mirror malfunction, be careful not to get your hand caught by the moving mirror.


■When the mirror defoggers are operating


Do not touch the rear view mirror surfaces, as they can become very hot and burn you.


90


1


1-4. Opening and closing the windows and moon roof Power windows


The power windows can be opened and closed using the switches. Operating the switch moves the windows as follows:


Window lock switch


Closing One-touch closing* Opening One-touch opening* *: Pushing the switch in the opposite direction will stop window travel partway.


Press the switch down to lock the passenger window switches and back window switch.


Use this switch to prevent chil- dren from accidentally opening or closing a passenger window and back window.


CTH14AS010


CTH14AS002


91


1-4. Opening and closing the windows and moon roof


■The power windows can be operated when


Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode. ■Operating the power windows after turning the engine off


Vehicles without a smart key system The power windows can be operated for approximately 45 seconds even after the engine switch is turned to the “ACC” or “LOCK” position. They can- not, however, be operated once either front door is opened. Vehicles with a smart key system The power windows can be operated for approximately 45 seconds even after the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. They cannot, however, be operated once either front door is opened.


■Jam protection function


If an object becomes caught between the window and the window frame, window travel is stopped and the window is opened slightly.


■Customization that can be configured at Toyota dealer Settings (e.g. linked door lock operation) can be changed. (Customizable features →P. 638)


92


1


1-4. Opening and closing the windows and moon roof


CAUTION


■Closing the windows


Observe the following precautions.

Loading...
x