Login- Download PDF Manual
-
● If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate.
● When the power steering warning light illuminates with the engine running, there will be no power assist for the steering. You will still have control of the vehicle but the steering will be harder to operate. Have the power steering system checked by a NISSAN dealer.
When the ignition switch is placed in the ON position, the power steering warning light illumi- nates. After starting the engine, the power steer- ing warning light turns off. This indicates the power steering system is operational.
If the power steering warning light illuminates while the engine is running, it may indicate the power steering system is not functioning properly and may need servicing. Have the power steering system checked by a NISSAN dealer. When the power steering warning light illumi- nates with the engine running, there will be no power assist for the steering but you will still have control of the vehicle. At this time, greater steering effort is required to operate the steering wheel, especially in sharp turns and at low speeds. See “Power steering” in the “Starting and driving” section.
P position selecting warning light (for models with NISSAN Intelligent Key®) (if so equipped)
The light blinks red and the warning buzzer sounds if you are outside of the vehicle with the Intelligent Key and the engine is off, but the shift lever is not in the P (Park) position.
When the warning light blinks, place the ignition switch in the ON position, move the shift lever to the P (Park) position, then place the ignition switch in the LOCK position.
Instruments and controls 2-13
Seat belt warning light and chime
The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition switch is placed in the ON or START position and remains illuminated until the driver’s seat belt is fastened. At the same time, the chime sounds for about 6 seconds unless the driver’s seat belt is securely fastened.
The seat belt warning light may also illuminate if the front passenger’s seat belt is not fastened when the front passenger’s seat is occupied . For 7 seconds after the ignition switch is placed in the ON position, the system does not activate the warning light for the front passenger.
Refer to “Seat belts” in the “Safety—Seats, seat belts and supplemental restraint system” section for precautions on seat belt usage.
Supplemental air bag warning light
When the ignition switch is placed in the ON or START position, the supplemental air bag warn- ing light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the front air bag, side air bag, curtain air bag, and preten- 2-14 Instruments and controls
sioner seat belt systems need servicing and your vehicle must be taken to a NISSAN dealer: ● The supplemental air bag warning light re-
mains on after approximately 7 seconds.
● The supplemental air bag warning light
flashes intermittently.
● The supplemental air bag warning light does
not come on at all.
Unless checked and repaired, the supplemental restraint system (air bag system) and/or the pre- tensioners may not function properly. For addi- tional details see “Supplemental restraint sys- tem” in the “Safety—Seats, seat belts and supplemental restraint system” section of this manual.
WARNING
If the supplemental air bag warning light is on, it could mean that the front air bag, side air bag, curtain air bag systems and/or pretensioner systems will not op- erate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible.
INDICATOR LIGHTS
Continuously Variable Transmission (CVT) position indicator light (if so equipped)
When the ignition switch is placed in the ON position, the indicator light shows the shift lever position. See “Driving the vehicle” in the “Starting and driving” section of this manual.
Cruise main switch indicator light (if so equipped)
The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational.
Engine start operation indicator (if so equipped)
For vehicles equipped with push button ignition this indicator illuminates when the ignition switch is in the LOCK, OFF, ACC or ON position with the shift lever in the P (Park) position.
This indicator means that the engine will start by pushing the push-button ignition switch with the brake pedal depressed.
Front fog light indicator light (if so equipped)
Malfunction Indicator Light (MIL)
The front fog light indicator light illuminates when the front fog lights are ON. See “Fog light switch” in this section.
If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction.
Front passenger air bag status light
The front passenger air bag status light ( will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used.
For front passenger air bag status light operation, see “Front passenger air bag and status light” in the “Safety — Seats, seat belts and supplemental restraint system” section of this manual. High beam indicator light (blue)
This blue light comes on when the headlight high beams are on and goes out when the low beams are selected.
The high beam indicator light also comes on when the passing signal is activated.
may also come on steady if the fuel- The filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gal (11.4 L) of fuel in the fuel tank.
light should After a few driving trips, the turn off if no other potential emission control system malfunction exists. If this indicator light comes on steady for 20 sec- onds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control system inspection/maintenance test. See “Readiness for inspection/maintenance (I/M) test” in the “Tech- nical and consumer information” section of this manual.
Operation
The Malfunction Indicator Light will come on in one of two ways: ● Malfunction Indicator Light on steady — An emission control system malfunction has been detected. Check the fuel-filler cap. If the LOOSE FUEL CAP warning message is displayed in the odometer, and the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the vehicle. light should turn off after a few The driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer.
● Malfunction Indicator Light blinking — An engine misfire has been detected which may damage the emission control system. To re- duce or avoid emission control system dam- age: – do not drive at speeds above 45 MPH
(72 km/h).
– avoid hard acceleration or deceleration. – avoid steep uphill grades. – if possible, reduce the amount of cargo
being hauled.
Instruments and controls 2-15
The Malfunction Indicator Light may stop blinking and come on steady. Have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer.
For vehicles with Intelligent Key: This light blinks when the ignition switch is placed in the LOCK position with the key removed from the ignition switch.
CAUTION
Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission con- trol system.
Overdrive OFF indicator light (CVT models) (if so equipped)
The overdrive OFF indicator when the overdrive off mode is selected.
light
illuminates
For additional information, see “Continuously Variable Transmission (CVT)” in the “Starting and driving” section of this manual.
Security indicator light
For vehicles without Intelligent Key: This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position.
2-16 Instruments and controls
The blinking security indicator light indicates that the security systems equipped on the vehicle are operational.
For additional tems” in this section.
information, see “Security sys-
Side light and headlight indicator light (green) (if so equipped)
The side light and headlight indicator light illumi- nates when the side light or headlight position is selected. See “Headlight and turn signal switch” in this section for further details. Slip indicator light
This indicator will blink when the Vehicle Dynamic Control (VDC) system or the traction control system is operating, thus alerting that the vehicle is nearing its traction limits. The road surface may be slippery.
Turn signal/hazard indicator lights
The appropriate light flashes when the turn signal switch is activated.
Both lights flash when the hazard switch is turned on.
Vehicle Dynamic Control (VDC) off indicator light
This indicator light comes on when the Vehicle Dynamic Control off switch is pushed to OFF. This indicates the Vehicle Dynamic Control sys- tem is not operating.
Push the Vehicle Dynamic Control off switch again or restart the engine and the system will operate normally. See “Vehicle Dynamic Control (VDC) system” in the “Starting and driving” sec- tion of this manual.
The Vehicle Dynamic Control light also comes on when you place the ignition switch in the ON position. The light will turn off after about 2 sec- onds if the system is operational. If the light stays indicator on or comes on along with the light while you are driving, have the Vehicle Dy- namic Control system checked by a NISSAN dealer.
While the Vehicle Dynamic Control system is operating, you might feel slight vibration or hear the system working when starting the vehicle or accelerating, but this is normal. AUDIBLE REMINDERS Brake pad wear warning The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard. Key reminder chime A chime sounds if the driver’s door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle. Light reminder chime With the ignition switch placed in the OFF posi- tion, a chime sounds when the driver’s door is opened if the headlights or parking lights are on.
Turn the headlight control switch off before leav- ing the vehicle.
NISSAN Intelligent Key® door buzzer (if so equipped) The Intelligent Key door buzzer sounds if any one of the following improper operations is found. ● The ignition switch is not returned to the
LOCK position when locking the doors.
● The Intelligent Key is left inside the vehicle
when locking the doors.
● The Intelligent Key is taken outside the ve-
hicle when operating the vehicle.
● Any doors are not closed securely when
locking the doors.
When the buzzer sounds, be sure to check both the vehicle and the Intelligent Key. See “NISSAN Intelligent Key®” in the “Pre-driving checks and adjustments” section. Parking brake reminder chime A chime sounds if the parking brake is set and the vehicle is driven. The chime will stop if the parking brake is released or the vehicle speed returns to zero.
SECURITY SYSTEMS
NISSAN VEHICLE IMMOBILIZER SYSTEM (if so equipped) The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of a registered key. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following pro- cedures: 1. Leave the ignition switch placed in the ON
position for approximately 5 seconds.
2. Place the ignition switch in the OFF or LOCK position and wait approximately 10 seconds.
3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key.
If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices.
Instruments and controls 2-17
If the NISSAN Vehicle Immobilizer System is mal- functioning, the light will remain on while the ignition switch is placed in the ON position. If the light still remains on and/or the en- gine will not start, see a NISSAN dealer for NISSAN Vehicle Immobilizer System ser- vice as soon as possible. Please bring all registered keys that you have when visiting your NISSAN dealer for service.
FCC Notice: For USA: This device complies with part 15 of the FCC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference re- ceived, including interference that may cause undesired operation.
NOTE: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. For Canada: This device complies with RSS-210 of In- dustry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation of the device.
2-18 Instruments and controls
LIC0474
Security indicator light For vehicles without Intelligent Key: This light blinks whenever the ignition switch is placed in the LOCK, OFF or ACC position. For vehicles with Intelligent Key: This light blinks when the ignition switch is placed in the LOCK position with the key removed from the ignition switch. This function indicates the NISSAN Vehicle Im- mobilizer System is operational.
WINDSHIELD WIPER AND WASHER SWITCH
LIC2153
LIC2131
Type A SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position.
Push the lever down to operate the wiper at the following speed: 䊊1
Intermittent (INT) — intermittent operation can be adjusted by turning the knob toward 䊊A (Slower) or 䊊B (Faster). 䊊2
Low (LO) — continuous low speed operation 䊊3 High (HI) — continuous high speed opera-tion
Type B
Push the lever up 䊊4 to have one sweep opera- tion (MIST) of the wiper. Pull the lever toward you 䊊5
to operate the washer. The wiper will also operate several times.WARNING
In freezing temperatures the washer solu- tion may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster before you wash the windshield.
CAUTION
● Do not operate the washer continuously
for more than 30 seconds.
● Do not operate the washer if the reser-
voir is empty.
● Do not fill the windshield-washer fluid reservoir with washer fluid concen- trates at full strength. Some methyl al- cohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshield- washer fluid reservoir.
● Pre-mix windshield-washer fluid con- centrates with water to the manufactur- er’s recommended levels before pour- ing the fluid into the windshield-washer fluid reservoir. Do not use the windshield-washer to mix the windshield-washer fluid con- centrate and water.
fluid reservoir
Instruments and controls 2-19
REAR WINDOW WIPER AND WASHER SWITCH
REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH
WARNING
In freezing temperatures the washer solu- tion may freeze on the window and ob- scure your vision. Warm the rear window with the defroster before you wash the rear window.
CAUTION
● Do not operate the washer continuously
for more than 30 seconds.
● Do not operate the washer if the reser-
voir is empty.
● Do not fill the windshield-washer fluid reservoir with washer fluid concen- trates at full strength. Some methyl al- cohol based washer fluid concentrates may permanently stain the grille if spilled while filling the windshield- washer fluid reservoir.
● Pre-mix washer fluid concentrates with to the manufacturer’s recom- water mended levels before pouring the fluid into the windshield-washer fluid reser- voir. Do not use the windshield-washer fluid reservoir to mix the washer fluid concentrate and water.
LIC2116
To defrost the rear window glass, start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes.CAUTION
When cleaning the inner side of the rear window, be careful not to scratch or dam- age the rear window defroster.
LIC2398
The rear window wiper and washer operate when the ignition switch is placed in the ON position.Turn the switch clockwise from the OFF position to operate the wiper. 䊊1
Intermittent (INT) – intermittent operation (not adjustable)
䊊2 ON – continuous low speed operation Push the switch forward 䊊3
to operate the washer. The wiper will also operate several times.2-20 Instruments and controls
HEADLIGHT AND TURN SIGNAL SWITCH
LIC2127
WIC1509
Type A
HEADLIGHT CONTROL SWITCH Lighting 䊊1 When turning the switch to the
posi- tion, the front parking, tail, license plate and instrument panel lights come on. 䊊2 When turning the switch to the
posi- tion, the headlights come on and all the other lights remain on.
Type B
CAUTION
Use the headlights with the engine run- ning to avoid discharging the vehicle battery.
LIC2128
Headlight beam select 䊊1 To select the high beam function, push the lever forward. The high beam lights come on and the
light illuminates.
䊊2 Pull the lever back to select the low beam. 䊊3 Pulling and releasing the lever flashes the
headlight high beams on and off.
Battery saver system If the ignition switch is placed in the OFF position while the headlight switch is in the or a period of time.
position, the headlights will turn off after
Instruments and controls 2-21
CAUTION
WARNING
When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.
Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.
DAYTIME RUNNING LIGHT SYSTEM (Canada only) The headlights automatically illuminate at a re- duced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the position. Turn the OFF position or in the position for full headlight switch to the illumination when driving at night.
If the parking brake is applied before the engine is started, the daytime running lights do not illumi- nate. The daytime running lights illuminate when the parking brake is released. The daytime run- ning lights will remain on until the ignition switch is placed in the OFF position.
2-22 Instruments and controls
LIC2137
INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the headlight control switch is in the or Press the control 䊊A to adjust the brightness of instrument panel lights when driving at night.
position.
HORN
WIC1512
TURN SIGNAL SWITCH Turn signal 䊊1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signal cancels automatically.
Lane change signal 䊊2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch. The turn signal will flash three times automati- cally.
WIC1513
FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the To turn the fog lights off, turn the fog light switch to the OFF position. The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected.position.
LIC2419
To sound the horn, push near the horn icon of the steering wheel.WARNING
Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tam- pering with the supplemental front air bag system may result in serious personal injury.
Instruments and controls 2-23
● When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials.
● If any malfunctions are found or the heated seat does not operate, turn the switch off and have the system checked by your NISSAN dealer.
HEATED SEATS (if so equipped)
WIC1441
The front seats are warmed by built-in heaters.1. Start the engine.
2. Push the LO or HI position of the switch, as desired. The indicator light in the switch will illuminate.
The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.
3. When the seat is warmed or before you leave the vehicle, be sure to turn the switch off.
2-24 Instruments and controls
WARNING
Do not use or allow occupants to use the seat heater if you or the occupants cannot monitor elevated seat temperatures or have an inability to feel pain in body parts that contact the seat. Use of the seat heater by such people could result in seri- ous injury.
CAUTION
● The battery could run down if the seat heater is operated while the engine is not running.
● Do not use the seat heater for extended periods or when no one is using the seat.
● Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc. Otherwise, the seat may become overheated.
● Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.
● Any liquid spilled on the heated seat should be removed immediately with a dry cloth.
VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH
Push the VDC OFF switch again or restart the engine to turn on the system. See “Vehicle Dy- namic Control (VDC) system” in the “Starting and driving” section.
LIC1548
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF switch. Theindicator will come on.
Type A
LIC2156
Instruments and controls 2-25
POWER OUTLET
The power outlet is for powering electrical acces- sories such as cellular telephones. The outlet is rated at 12 volt, 240 W (20A) maximum.
CAUTION
● The outlet and plug may be hot during
or immediately after use.
● Only certain power outlets are designed for use with a cigarette lighter unit. Do not use any other power outlet for an accessory lighter. See your NISSAN dealer for additional information.
● Do not use with accessories that exceed a 12 volt, 240 W (20A) power draw. Do not use double adapters or more than one electrical accessory.
● Use power outlets with the engine run- ning to avoid discharging the vehicle battery.
Type B
LIC2529
● Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open.
● When not in use, be sure to close the cap. Do not allow water or any other liquid to contact the outlet.
● Avoid using power outlets when the air conditioner (if so equipped), headlights or so equipped) is on.
rear window defroster
(if
● Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF.
2-26 Instruments and controls
STORAGE
MAP POCKETS
LIC0799
LIC1328
SEATBACK POCKETS The seatback pockets are located on the back of the driver and front passenger seat. The pockets can be used to store maps.
Type A
LIC2161
Instruments and controls 2-27
LIC2113
LIC2159
LIC2162
Type B
STORAGE TRAYS
CUP HOLDERS
Front
WARNING
CAUTION
Rear – Type A
Do not place sharp objects in the trays to help prevent injury in an accident or sud- den stop.
● Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.
● Use only soft cups in the cup holder. Hard objects can injure you in an accident.
2-28 Instruments and controls
LIC0974
LIC2158
Rear – Type B
Lower the rear center armrest to access the cup holders.
Bottle holder
CAUTION
● Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. ● Do not use bottle holder for open liquid
containers.
GLOVE BOX Upper glove box
Instruments and controls 2-29
CARGO COVER (if so equipped)
WARNING
● Never put anything on the cargo cover, no matter how small. Any object on it could cause an injury in an accident or sudden stop.
● Do not put objects heavier than 44 lbs (20 kg) on the cargo cover for long peri- ods of time.
● Do not leave the cargo cover in the vehicle with it disengaged from the holder.
● Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or col- lision, unsecured cargo could cause personal injury.
● Your child could be seriously injured or killed in a collision if the child restraint top tether strap is damaged.
LIC2532
Open the upper glove box by pulling the handle.LIC2160
Open the lower glove box by pulling the handle.WARNING
WARNING
Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop. Lower glove box
Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.
2-30 Instruments and controls
– If the cargo cover contacts the top tether strap when it is attached to the top tether anchor, remove the cargo cover from the vehicle or secure it on the cargo floor below its attachment location. If the cargo cover is not re- moved, it may damage the top tether strap during a collision.
– Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or that contacts the top tether strap may damage the top tether strap during a collision.
To remove the cargo cover: 䊊1 Remove the straps from the rear hatch. 䊊2 Remove the edge of the cargo cover privacy
cloth from the rear seatback.
䊊3 Remove the cargo cover holders from the
rear pillar.
DIVIDE-N-HIDE ADJUSTABLE FLOOR (if so equipped)
WIC1003
The cargo cover keeps the luggage compartment contents hidden from the outside.Only attach the hook and loop fastener on the cargo cover privacy cloth to the area on the rear seatback where it is supposed to be attached. Otherwise, the seat surface could be damaged.
Instruments and controls 2-31
LIC2527
LIC2528
LIC2549
To raise: 1. Lift and open the panel 2. Move the load floor along the lower trim panel channels toward the rear of the vehicle until it reaches the end of the slot.
3. Move the load floor along the upper trim panel channels toward the front of the ve- hicle until the latches lock it into place.
4. Lift and close the panel.
GROCERY HOOKS The grocery hooks allow for standard size plastic grocery bags to hang side by side.
CAUTION
Do not apply a total load of more than 6.6 lbs (3 kg) to a single grocery hook.
WARNING
Do not put objects heavier than 110 lbs (50 kg) on the load floor.
To lower: 1. Lift and open the panel. 2. Move the load floor along the upper trim panel channels toward the rear of vehicle until it reaches the end of the slot.
3. Move the load floor along the lower trim panel channels toward the front of the ve- hicle until the latches lock it into place.
4. Lift and close the panel. 2-32 Instruments and controls
WINDOWS
POWER WINDOWS (if so equipped)
WARNING
● Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.
● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- dren could become involved in serious accidents.
The power windows operate when the ignition switch is placed in the ON position, or for a period of time after the ignition switch is placed in the OFF position. If the driver’s or passenger’s door is opened during this period of time, the power to the windows is canceled.
WIC0872
1. Window lock button 2. 3. 4. 5. 6.
Power door lock switch Front passenger’s side window switch Right rear passenger’s window switch Left rear passenger’s window switch Driver’s side automatic switch
Driver’s side power window switch The driver’s side control panel is equipped with switches to open or close the front and rear passenger windows. To open a window, push the switch and hold it down. To close a window, pull the switch and hold it up. To stop the opening or closing function at any time, simply release the switch.
Instruments and controls 2-33
LIC0718
LIC0718
LIC0410
Front passenger’s power window switch The passenger’s window switch operates only the corresponding passenger’s window. To open the window, push the switch and hold it down 䊊1 . To close the window, pull the switch up 䊊2 .
Rear power window switch The rear power window switches open or close only the corresponding windows. To open the window, push the switch and hold it down 䊊1 . To close the window, pull the switch up 䊊2 . Locking passengers’ windows When the window lock button is depressed, only the driver’s side window can be opened or closed. Push it again to cancel the window lock function.
Automatic operation To fully open a window equipped with automatic operation, press the window switch down to the second detent and release it; it need not be held. The window automatically opens all the way. To stop the window, lift the switch up while the window is opening.
To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held. The window automatically closes all the way. To stop the win- dow, press the switch down while the window is closing.
2-34 Instruments and controls
Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.
WARNING
There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.
If the vehicle’s battery is disconnected, replaced, or jump started, the power window auto-reverse function may not operate properly. If this occurs, please contact a NISSAN dealer to re-initialize the power window auto-reverse system. If the control unit detects something caught in a window equipped with automatic operation as it is closing, the window will be immediately low- ered.
WIC0263
MANUAL WINDOWS (if so equipped) The side windows can be opened or closed by turning the hand crank on each door.SIC2063A
Instruments and controls 2-35
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
INTERIOR LIGHT
The interior light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position 䊊1 , the interior lights illuminate, regardless of door posi- tion. The lights will go off after a period of time unless the ignition switch is placed in the ACC or ON position.
2-36 Instruments and controls
When the switch is in the DOOR position 䊊2 , the interior lights will stay on for a period of time when: ● The doors are unlocked by the keyfob, a key or the power door lock switch while all doors are closed and the ignition switch is placed in the OFF position.
● The driver’s door is opened and then closed while the key is removed from the ignition switch.
● The key is removed from the ignition switch
while all doors are closed.
The lights will turn off while the timer is activated when: ● The driver’s door is locked by the keyfob, a
key, or the power door lock switch.
● The ignition switch is placed in the ON po-
sition.
When the switch is in the OFF position 䊊3 , the interior lights do not illuminate, regardless of door position.
The lights will turn off automatically after a period of time while doors are open to prevent the bat- tery from becoming discharged.
MAP LIGHT (if so equipped)
LUGGAGE COMPARTMENT LIGHT
The light illuminates when the rear hatch is opened. When the rear hatch is closed, the light will turn off. The light also illuminates with other interior lights when the interior light switch is in the DOOR position. See “Interior light” in this section. The lights will turn off automatically after a period of time while doors are open to prevent the bat- tery from becoming discharged.
● The driver’s door is opened and then closed while the key is removed from the ignition switch.
● The key is removed from the ignition switch
while all doors are closed.
The light will turn off while the timer is activated when: ● The driver’s door is locked by the keyfob (if so equipped), a key, or the power door lock switch.
● The ignition switch is placed in the ON po-
sition.
When the switch is in the OFF position 䊊1 , the map light does not illuminate, regardless of door position. The light will turn off automatically after a period of time while doors are open to prevent the bat- tery from becoming discharged.
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
Instruments and controls 2-37
LIC2126
The map light has a three-position switch and operates regardless of ignition switch position. When the switch is in the ON position 䊊3 , the map light illuminates, regardless of door position. The light will go off after a period of time unless the ignition switch is placed in the ACC or ON position. When the switch is in the DOOR position 䊊2 , the map light will stay on for a period of time when: ● The doors are unlocked by the keyfob (if so equipped), a key or the power door lock switch while all doors are closed and the ignition switch is placed in the OFF position.
MEMO
2-38 Instruments and controls
3 Pre-driving checks and adjustments
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Intelligent Key® (if so equipped) . . . . . . . . . 3-3
NISSAN vehicle immobilizer system keys (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . 3-6
Locking with power door lock switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Automatic door locks (if so equipped). . . . . . . . . . . . . 3-7
Child safety rear door lock . . . . . . . . . . . . . . . . . . . . . . . 3-7Remote keyless entry system (models without NISSAN Intelligent Key®) (if so equipped) . . . . . . . . . . . 3-8
How to use remote keyless entry system . . . . . . . . . . 3-9
NISSAN Intelligent Key® (if so equipped) . . . . . . . . . . . 3-11
Operating range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . 3-14
NISSAN Intelligent Key® operation . . . . . . . . . . . . . . 3-14
How to use the remote keyless entry function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-18Warning lights and audible reminders . . . . . . . . . . . . 3-21
Warning signals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . 3-23
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Rear hatch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Opening the rear hatch. . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Rear hatch release. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Opener operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27
Steering wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Tilt operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-29
Vanity mirrors (if so equipped). . . . . . . . . . . . . . . . . . . 3-30
Mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30
Rearview mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30
Outside mirrors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-30KEYS
A key number is only necessary when you have lost all keys and do not have one to make a duplicate. If you still have a key, your NISSAN dealer can duplicate it.
Type A
LPD2130
Transponder chip (if so equipped) Key number plate
1. Master key 2. 3. A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate.
3-2 Pre-driving checks and adjustments
LPD2045
Type B—Remote keyless entry keyfob
(if so equipped)
1. 2.
Integrated door lock keyfob Key number plate
CAUTION
Do not leave the ignition key inside the vehicle when you leave the vehicle.
A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record key numbers so it is very important to keep track of your key number plate. A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, your NISSAN dealer can duplicate it.
Never leave these keys in the vehicle.
As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key components when register- ing new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.
CAUTION
Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical to come into contact with water or salt water. This could affect the system function.
components,
● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply
against another object.
● Do not change or modify the Intelligent
Key.
Pre-driving checks and adjustments 3-3
LPD0350
Two Intelligent Keys
1. 2. Mechanical keys (inside Intelligent
Keys) Key number plate
3. NISSAN INTELLIGENT KEY® (if so equipped) Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intel- ligent Key system components and NISSAN Ve- hicle Immobilizer System components.
● Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, im- mediately wipe until it is completely dry. ● Do not place the Intelligent Key for an extended period in an area where tem- peratures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.
3-4 Pre-driving checks and adjustments
CAUTION
Always carry the mechanical key installed in the Intelligent Key slot.
See “Doors” in this section and “Storage” in the “Instruments and controls” section of this manual. NISSAN VEHICLE IMMOBILIZER SYSTEM KEYS (if so equipped) You can only drive your vehicle using the master keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head. The master key can be used for all the locks. Never leave these keys in the vehicle. Additional or replacement keys: If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can dupli- cate your existing key. As many as 4 NISSAN Vehicle Immobilizer System keys can be used with one vehicle. You should bring all NISSAN Vehicle Immobilizer System keys that you have to your NISSAN dealer for registration. This is be- cause the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System.
SPA1951
Mechanical key The Intelligent Key contains the mechanical key, which can be used in case of a discharged bat- tery.
To remove the mechanical key, release the lock knob on the back of the Intelligent Key.
To install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.
The mechanical key can be used for operation in the same way as an ordinary key.
After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle.
CAUTION
Do not allow the immobilizer system key, which contains an electrical transponder, to come into contact with water or salt water. This could affect system function.
DOORS
When the doors are locked using one of the following methods, the doors cannot be opened using the inside or outside door handles. The doors must be unlocked to open the doors.
WARNING
● Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally open- ing the doors, and will help keep out intruders.
● Before opening any door, always look
for and avoid oncoming traffic.
● Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls. Unattended children could become involved in seri- ous accidents.
LPD2160
Driver’s side and Passenger side
(if so equipped)
LOCKING WITH KEY Manual (if so equipped) To lock a door, turn the key toward the front of the vehicle 䊊1 . To unlock, turn the key toward the rear of the vehicle 䊊2 .
Pre-driving checks and adjustments 3-5
LPD2161
Power (if so equipped) The power door lock system allows you to lock or unlock all doors at the same time. Turning the key toward the front 䊊1 of the vehicle locks all doors. Turning the key one time toward the rear 䊊2 of the vehicle unlocks that door. From that position, returning the key to neutral 䊊3 (where the key can only be removed and inserted) and turning it toward the rear again within 5 seconds unlocks all doors 䊊4 .
3-6 Pre-driving checks and adjustments
Inside lock
SPA2760
LOCKING WITH INSIDE LOCK KNOB To lock the door without the key, move the inside lock knob to the lock position 䊊1 , then close the door. To unlock the door without the key, move the inside lock knob to the unlock position 䊊2 .
WPD0381
LOCKING WITH POWER DOOR LOCK SWITCH (if so equipped) To lock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to the lock position 䊊1 . When locking the door this way, be certain not to leave the key inside the vehicle. To unlock all the doors without a key, push the door lock switch (driver’s or front passenger’s side) to the unlock position 䊊2 .
Lockout protection When the power door lock switch is moved to the lock position and any door is open, all doors will lock and unlock automatically. With the Intelligent Key left in the vehicle and any door is open, all doors will unlock automatically and a chime will sound after the door is closed. These functions help to prevent the Intelligent Key from being accidentally locked inside the vehicle. AUTOMATIC DOOR LOCKS (if so equipped) ● All doors lock automatically when the vehicle
speed reaches 15 MPH (24 km/h).
● All doors unlock automatically when the ig- nition is placed in the OFF position (models with Intelligent Key system) or when the key is removed from the ignition switch (models without Intelligent Key system).
The automatic unlock function can be de- activated or activated. To deactivate or acti- vate the automatic door unlock system, perform the following procedure: 1. Close all doors. 2. Place the ignition switch in the ON position. 3. Within 20 seconds of performing Step 2, push and hold the power door lock switch to position (UNLOCK) for more than the 5 seconds.
4. When activated, the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
5. The ignition switch must be placed in the OFF and ON position again between each setting change.
When the automatic door unlock system is deac- tivated, the doors do not unlock when the ignition switch is placed in the OFF position (models with Intelligent Key system) or when the key is re- moved from the ignition switch (models without Intelligent Key system). To unlock the door manu- ally, use the inside lock knob or the power door lock switch (driver’s or front passenger’s side).
LPD2166
CHILD SAFETY REAR DOOR LOCK Child safety locks help prevent the rear doors from being opened accidentally, especially when small children are in the vehicle. The child safety lock levers are located on the edge of the rear doors. When the lever is in the unlock position 䊊2 , the door can be opened from the outside or the inside. When the lever is in the LOCK position 䊊1 , the door can be opened only from the out- side.Pre-driving checks and adjustments 3-7
REMOTE KEYLESS ENTRY SYSTEM (models without NISSAN Intelligent Key®) (if so equipped)
WARNING
● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use.
● The remote keyless entry keyfob trans- mits radio waves when the buttons are pressed. The FAA advises radio waves may affect aircraft navigation and com- munication systems. Do not operate the remote keyless entry keyfob while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored for a flight.
It is possible to lock/unlock all doors, turn the interior lights on, and activate the panic alarm by using the keyfob from outside the vehicle. Be sure to remove the key from the vehicle before locking the doors.
The keyfob can operate at a distance of approxi- mately 33 ft (10 m) from the vehicle. The effective distance depends on the conditions around the vehicle.
3-8 Pre-driving checks and adjustments
As many as 5 keyfobs can be used with one vehicle. For information concerning the purchase and use of additional keyfobs, contact a NISSAN dealer.
The keyfob will not function when: ● the battery is discharged ● the distance between the vehicle and the
keyfob is over 33 ft (10 m)
The panic alarm will not activate when the key is in the ignition switch.
CAUTION
Listed below are conditions or occur- rences which will damage the keyfob: ● Do not allow the keyfob, which contains electrical components, to come into contact with water or salt water. This could affect the system function.
● Do not drop the keyfob. ● Do not strike the keyfob sharply against
another object.
● Do not change or modify the keyfob. ● Wetting may damage the keyfob. If the keyfob gets wet, immediately wipe until it is completely dry.
● Do not place the keyfob for an extended period in an area where temperatures exceed 140°F (60°C).
● Do not attach the keyfob with a key
holder that contains a magnet.
● Do not place the keyfob near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.
If a keyfob is lost or stolen, NISSAN rec- ommends erasing the ID code of that key- fob. This will prevent the keyfob from un- authorized use to unlock the vehicle. For information regarding the erasing proce- dure, please contact a NISSAN dealer.
● When the
button is pressed with all doors locked, the hazard warning lights flash twice and the horn beeps once as a reminder the doors are already locked.
that
● If a door
is open and you press button, the doors will lock the but the horn will not beep and the hazard lights will not flash.
The horn may or may not beep. Refer to “Silenc- ing the horn beep feature” in this section for details.
LPD2039
HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Close all windows.
2. Remove the key from the ignition switch.
3. Close all doors and the rear hatch.
4. Press the
button on the keyfob. All the doors lock. The hazard warning lights flash twice and the horn beeps once to indicate all doors are locked.
LPD2040
Unlocking doors
button on the keyfob once.
Press the ● Only the driver’s door unlocks. ● The hazard warning lights flash once if all doors are completely closed with the ignition switch in any position except the ON posi- tion.
● The interior light turns on and the light timer activates for a period of time when the inte- rior light switch is in the DOOR position with the ignition switch in any position except the ON position.
Pre-driving checks and adjustments 3-9
button on the keyfob once to
Using the interior light Press the turn on the interior lights. For additional information, refer to “Interior light” in the “Instruments and controls” section in this manual.
button on the keyfob again
Press the within 5 seconds. ● All doors and the rear hatch unlock. ● The hazard warning lights flash once if all
doors are completely closed.
The interior lights can be turned off without wait- ing by inserting the key into the ignition switch and placing the ignition switch in the ON or START position, locking the doors with the key- fob or pushing the interior light switch to the OFF position. Auto relock When the button on the keyfob is pressed, all doors will lock automatically within 1 minute unless one of the following operations is per- formed: ● Any door is opened. ● A key is inserted into the ignition switch and
the switch is cycled from OFF to ON.
3-10 Pre-driving checks and adjustments
LPD2041
Using the panic alarm If you are near your vehicle and feel threatened, you may activate the panic alarm to call attention button on the by pressing and holding the keyfob for longer than 0.5 seconds. The panic alarm and headlights will stay on for a period of time. The panic alarm stops when: ● it has run for a period of time, or ● any button is pressed on the keyfob.
The hazard warning lights will flash once and the horn will sound once to confirm that the horn beep feature has been reactivated. Deactivating the horn beep feature does not si- lence the horn if the alarm is triggered.
NISSAN INTELLIGENT KEY® (if so equipped)
WARNING
● Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufac- turer for the possible influences before use.
● The Intelligent Key transmits radio waves when the buttons are pressed. The FAA advises the radio waves may affect aircraft navigation and communi- cation systems. Do not operate the In- telligent Key while on an airplane. Make sure the buttons are not operated unin- tentionally when the unit is stored for a flight.
The Intelligent Key system can operate all the door locks using the remote controller function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or conditions may af- fect the Intelligent Key system operation.
Be sure to read the following before using the Intelligent Key system.
Pre-driving checks and adjustments 3-11
LPD2044
Silencing the horn beep feature If desired, the horn beep feature can be deacti- vated using the keyfob.
To deactivate: Press and hold the and
buttons for at least 2 seconds.
The hazard warning lights will flash three times to confirm that the horn beep feature has been deactivated.
To activate: Press and hold the and more.
buttons for at least 2 seconds once
CAUTION
● Be sure to carry the Intelligent Key with
you when operating the vehicle.
● Never leave the Intelligent Key in the
vehicle when you leave the vehicle.
The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intel- ligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions: ● When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broadcasting station.
● When in possession of wireless equipment, such as a cellular telephone, transceiver, and CB radio.
● When the Intelligent Key is in contact with or
covered by metallic materials.
● When any type of radio wave remote control
is used nearby.
● When the Intelligent Key is placed near an electric appliance such as a personal com- puter.
3-12 Pre-driving checks and adjustments
● When the vehicle is parked near a parking
meter.
In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key.
If
Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. the battery is dis- charged, replace it with a new one. When the Intelligent Key battery is almost dis- charged, insert the Intelligent Key into the Intelli- gent Key port to start the engine. Replace the discharged battery with a new one as soon as possible. For additional information, see “Push Button Ignition Switch” in the “Starting and driv- ing” section. Since the Intelligent Key is continuously receiving radio waves, if the key is left near equipment which transmits strong radio waves, such as sig- nals from a TV and personal computer, the bat- tery life may become shorter. For information regarding replacement of a bat- tery, see “Battery replacement” in the “Mainte- nance and do-it-yourself” section. As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent Keys, contact a NISSAN dealer.
CAUTION
Listed below are conditions or occur- rences which will damage the Intelligent Key: ● Do not allow the Intelligent Key, which contains electrical to come into contact with water or salt water. This could affect the system function.
components,
● Do not drop the Intelligent Key. ● Do not strike the Intelligent Key sharply
against another object.
● Do not change or modify the Intelligent
Key.
● Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, im- mediately wipe until it is completely dry. ● Do not place the Intelligent Key for an extended period in an area where tem- peratures exceed 140°F (60°C).
● Do not attach the Intelligent Key with a
key holder that contains a magnet.
● Do not place the Intelligent Key near equipment that produces a magnetic field, such as a TV, audio equipment and personal computers.
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelli- gent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact a NISSAN dealer.
If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function. When the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the request switch to lock/unlock the doors.
WPD0402
OPERATING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 䊊1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent Key operating range becomes narrower, and the Intelligent Key may not function properly.
The operating range is within 31.50 in (80 cm) from each request switch 䊊1 .
Pre-driving checks and adjustments 3-13
● To prevent the Intelligent Key from being left inside the vehicle, make sure you carry the Intelligent Key with you and then lock the doors.
● Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door.
WPD0375
DOOR LOCKS/UNLOCKS PRECAUTION ● Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the Intelli- gent Key is outside the vehicle.
● After locking with the door handle request switch, verify the doors are securely locked by testing them.
3-14 Pre-driving checks and adjustments
LPD2163
NISSAN INTELLIGENT KEY® OPERATION You can lock or unlock the doors without taking the key out of your pocket or bag. When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch or rear hatch request switch within the range of operation.
LPD2164
LPD2165
LPD2167
Locking doors 1. Place the ignition switch to the LOCK posi-
tion.
2. Close all doors and the rear hatch. 3. Push any door handle request switch 䊊1 or the rear hatch request switch 䊊2 while car- rying the Intelligent Key with you.
4. All doors and the rear hatch will lock.
5. The hazard warning lights flash twice and
the outside buzzer sounds once.
NOTE: ● Doors lock with the door handle request switch or rear hatch request switch while the ignition switch is pushed in.
● Doors lock with the door handle request switch or the rear hatch request switch while the ignition switch is not in the LOCK posi- tion.
● Doors do not lock by pushing the door handle request switch or the rear hatch re- quest switch while any door is open. How- ever, doors lock with the mechanical key even if any door is open.
Pre-driving checks and adjustments 3-15
● When the Intelligent Key is placed in-
side the glove box or a storage bin.
● When the Intelligent Key is placed in-
side the door pockets.
● When the Intelligent Key is placed on or
under the spare tire area.
● When the Intelligent Key is placed in-
side or near metallic materials.
● Doors do not lock with the door handle request switch or the rear hatch request switch with the Intelligent Key inside the vehicle and a beep sounds to warn you. However, when an Intelligent Key is inside the vehicle, doors can be locked with an- other Intelligent Key.
CAUTION
● After locking the doors using the re- quest switch, make sure that the doors have been securely locked by operating the door handles or the rear hatch opener switch.
● When locking the doors using the re- quest switch, make sure to have the Intelligent Key in your possession be- fore operating the request switch to prevent the Intelligent Key from being left in the vehicle.
● The request switch is operational only when the Intelligent Key has been de- tected by the Intelligent Key system.
Lockout protection
To prevent the Intelligent Key from being acci- dentally locked inside the vehicle, lockout protec- tion is equipped with the Intelligent Key.
When the driver’s side door is open, the doors are locked, and then the Intelligent Key is put inside the vehicle and all the doors are closed; the lock will automatically unlock and the door buzzer sounds.
NOTE:
The doors may not lock when the Intelli- gent Key is in the same hand that is oper- ating the request switch to lock the door. Put the Intelligent Key in a purse, pocket or your other hand.
CAUTION
The lockout protection may not function under the following conditions: ● When the Intelligent Key is placed on
top of the instrument panel.
● When the Intelligent Key is placed on
top of the rear parcel shelf.
● When the Intelligent Key is placed on
the cargo cover.
3-16 Pre-driving checks and adjustments
LPD2164
LPD2165
Unlocking doors 1. Carry the Intelligent Key. 2. Push the door handle request switch 䊊1 or
the rear hatch request switch 䊊2 .
3. The hazard warning lights flash once and the
outside buzzer sounds once.
4. Push the door handle request switch 䊊1
again within 1 minute to unlock all doors and the rear hatch.If a door handle is pulled while unlocking the doors, that door may not be unlocked. Returning the door handle to its original position will unlock the door. If the door does not unlock after return-
LPD2167
ing the door handle, push the door handle re- quest switch to unlock the door.All doors and the rear hatch will be locked auto- matically unless one of the following operations is performed within 1 minute after pushing the re- quest switch. ● Opening any doors or the rear hatch. ● Engaging the ignition switch from the locked
position.
The interior light illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position.
Pre-driving checks and adjustments 3-17
CAUTION
When locking the doors using the Intelli- gent Key, be sure not to leave the key in the vehicle.
The interior light can be turned off without waiting by performing one of the following operations. ● Placing the ignition switch to the ON posi-
tion.
● Locking the doors with the remote controller. ● Switching the room light switch to the OFF
position.
HOW TO USE THE REMOTE KEYLESS ENTRY FUNCTION The remote keyless entry function can operate all door locks using the remote keyless function of the Intelligent Key. The remote keyless function can operate at a distance of 33 ft (10 m) away from the vehicle. The operating distance de- pends upon the conditions around the vehicle.
The remote keyless entry function will not func- tion under the following conditions: ● When the Intelligent Key is not within the
operational range.
● When the doors or the rear hatch are open
or not closed securely.
● When the Intelligent Key battery is dis-
charged.
3-18 Pre-driving checks and adjustments
WPD0359
Locking doors 1. Place the ignition switch in the LOCK posi-
tion.
2. Close all doors and the rear hatch.
3. Press the
Key.
button on the Intelligent
4. The hazard warning lights flash twice and
the horn beeps once.
5. All doors and the rear hatch will be locked.
CAUTION
After locking the doors using the Intelli- gent Key, be sure that the doors have been securely locked by operating the door handles.
All doors and the rear hatch will be locked auto- matically unless one of the following operations is performed within 1 minute after pressing the ● Opening any doors or the rear hatch. ● Engaging the ignition switch from the lock
button.
position.
Unlocking doors 1. Press the
Key.
WPD0360
button on the Intelligent
2. The hazard warning lights flash once.
The interior light illuminates for a period of time when a door is unlocked and the room light switch is in the DOOR position. The light can be turned off without waiting by performing one of the following operations. ● Placing the ignition switch in the ACC or ON
