Download PDF Manual

Foreword


The inside pages of this manual contain a minimum of 50% recycled fibers, including 10% post-consumer fibers.


Welcome to the growing family of new NISSAN owners. This vehicle is delivered to you with confidence. It was produced using the latest techniques and strict quality control. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this manual before operating your vehicle. A separate Warranty Information and Maintenance Log Booklet explains details about the warranties covering your vehicle and vehicle maintenance schedules. Additionally, a separate Customer Care/Lemon Law Booklet will explain how to resolve any concerns you may have with your vehicle, as well as clarify your rights under your state’s lemon law. Your NISSAN dealership knows your vehicle best. When you require any service or have any questions, they will be glad to assist you with the extensive resources available to them.


WARNING


IMPORTANT SAFETY INFORMATION REMINDERS FOR SAFETY! Follow these important driving rules to help ensure a safe and complete trip for you and your passengers! c NEVER drive under the influence of alcohol or drugs. c ALWAYS observe posted speed limits and never drive too


fast for conditions.


c ALWAYS use your seat belts and appropriate child restraint systems. Pre-teen children should be seated in the rear seat. c ALWAYS provide information about the proper use of


vehicle safety features to all occupants of the vehicle.


c ALWAYS review this Owner’s Manual for important safety


information.


© 1997 NISSAN NORTH AMERICA, INC.


TORRANCE, CALIFORNIA


NOTES ON THE INFORMATION CONTAINED IN THIS OWNER’S MANUAL This Owner’s Manual contains descriptions and operating in- structions for all systems, features and optional equipment that might appear in any model of this vehicle built for any destina- tion in North America, including the continental United States, Canada and Hawaii. Therefore, you may find information in this manual that does not apply to your vehicle.


MODIFICATION OF YOUR VEHICLE This vehicle should not be modified. Modification could affect its performance, safety or durability, and may even violate governmental regulations. In addition, damage or perfor- mance problems resulting from modifications may not be covered under NISSAN warranties.


All rights reserved. No part of this Owner’s Manual may be reproduced or stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of Nissan North America, Inc.


All information, specifications and illustrations in this manual are those in effect at the time of printing. NISSAN reserves the right to change specifications or design without notice and without obligation.


Welcome To The World Of NISSAN


AFW0001


Your new Nissan is the result of our dedication to produce the finest in safe, reliable and economi- cal transportation. Your vehicle is the product of a successful worldwide company that manufac- tures cars and trucks in over 17 countries and distributes them in 170 nations. Nissan vehicles are designed and manufactured by Nissan Motor Co., Ltd. which was founded in Tokyo, Japan in 1933, and Nissan affiliates world wide, collectively growing to become the fifth larg- est automaker in the world. In addition to cars and trucks, Nissan also makes textile machinery, forklift trucks, marine engines, boats and other products. Nissan has made a substantial and growing investment in North America, starting with the opening of Nissan Motor Corporation U.S.A. in 1960 and continuing with the production of some cars and trucks at one of the world’s most


modern manufacturing facilities, Nissan Motor Manufacturing Corporation U.S.A. in Smyrna, Tennessee, vehicle styling at Nissan Design International in San Diego, California, and engi- neering at Nissan Research and Development in Farmington Hills, Michigan. Nissan Motor Corporation U.S.A. and its dealers employ about 60,000 Americans. Nissan is also a substantial contributor to the Canadian economy. Nissan Canada Inc., its sup- pliers and over 170 dealers employ approxi- mately 4,500 people. These include company employees and the staffs of Nissan dealers all across Canada. In addition, many Canadians work for companies that supply Nissan and Nis- san dealers with materials and services ranging from operation of port facilities and transpor-


The inside pages of this manual contain a minimum of 50% recycled fibers, including 10% post-consumer fibers.


tation services, to the supply of lubricants, parts and accessories. Nissan pioneered the use of electronics and computers in automobiles, and has led the indus- try in improving both performance and fuel effi- ciency through new engine designs and the use of synthetic materials to reduce vehicle weight. The company has also developed ways to build quality into its vehicles at each stage of the production process, both through extensive use of automation and — most importantly — through an awareness that people are the cen- tral element in quality control. From the time the parts arrived from our suppliers until you took delivery of your new Nissan, dozens of checks were made to ensure that only the best job was being done in producing and delivering your vehicle. Nissan also takes great care to ensure that when you take your Nissan to your dealer for maintenance, the service technician will perform his work according to the quality stan- dards that have been established by the factory. Safety has also been built into your Nissan. As you know, seat belts are an integral part of the safety systems that will help protect you and your passengers in the event of a sudden stop or an accident. We urge you to use the belts every time you drive the vehicle. The Nissan story of growth and achievement reflects our major goal: to provide you, our customer, with a vehicle that is built with quality and craftsmanship — a product that we can be proud to build and you can be proud to own.


Z X


NISSAN CUSTOMER CARE PROGRAM


NISSAN CARES ... Both NISSAN and your NISSAN dealer are dedicated to serving all your automotive needs. Your satisfaction with your vehicle and your NISSAN dealer are our primary concerns. Your NISSAN dealer is always available to assist you with all your automobile sales and service needs.


if


However, there is something that your NISSAN dealer cannot assist you with or you would like to provide NISSAN directly with comments or questions, please contact the NISSAN Consumer Affairs Depart- ment using our toll-free number: For U.S. mainland customers


1-800-NISSAN-1 (1-800-647-7261)


For Hawaii customers


(808) 836-0888 (Oahu Number)


For Canada customers


1-800-387-0122


The Consumer Affairs Department will ask for the following infor- mation: — Your name, address, and telephone number — Vehicle identification number (on dashboard) — Date of purchase — Current odometer reading — Your NISSAN dealer’s name — Your comments or questions


OR You can write to NISSAN with the information on the left at: For U.S. mainland and Alaska customers


Nissan Motor Corporation U.S.A. Consumer Affairs Department P.O. Box 191
Gardena, California 90248-0191


For Hawaii customers


Nissan Motor Corporation in Hawaii 2880 Kilihau St. Honolulu, Hawaii 96819


For Canada customers Nissan Canada Inc. 5290 Orbitor Drive Mississauga, Ontario L4W 4Z5


We appreciate your interest in NISSAN and thank you for buying a quality NISSAN vehicle.


Z X


IMPORTANT INFORMATION ABOUT THIS MANUAL


You will see various symbols in this manual. They are used in the following ways:


WARNING


This is used to indicate the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely.


CAUTION


This is used to indicate the presence of a hazard that could cause minor or moderate personal injury or damage to your vehicle. To avoid or reduce the risk, the procedures must be followed carefully.


If you see this symbol, it means ‘‘Do not do this’’ or ‘‘Do not let this happen.’’


APD1005


Z X


Z X


Table of Contents


Seats, restraints and supplemental air bag systems


Instruments and controls


Pre-driving checks and adjustments


Heater, air conditioner and audio systems


Starting and driving


In case of emergency


Appearance and care


Do-it-yourself


Maintenance


Technical and consumer information


Index


10


11


1 Seats, restraints and supplemental air bag systems


Front seats .............................................................1-2
Seat adjustment .....................................................1-2
Tilting front seat (Two-door model)........................1-4
Head restraints.......................................................1-4
Rear seat................................................................1-5
Supplemental restraint system (air bag system)...................................................................1-5
Supplemental air bag system.................................1-9
Warning labels......................................................1-11
Supplemental air bag warning light......................1-11
Seat belts .............................................................1-13


Precautions on seat belt usage ...........................1-13
Child safety...........................................................1-15
Pregnant women ..................................................1-15
Injured persons ....................................................1-15
Three-point type with retractor.............................1-16
Two-point type without retractor (rear center lap belt).................................................................1-18
Seat belt extenders ..............................................1-20
Seat belt maintenance .........................................1-20
Child restraints .....................................................1-21
Top strap child restraint .......................................1-29


Z X


FRONT SEATS


SEAT ADJUSTMENT


WARNING


c Do not adjust the driver’s seat while driving. The seat may move sud- denly and could cause loss of con- trol of the vehicle.


c After adjustment, gently rock in the is securely


to make sure it


seat locked.


ARS1037


ARS1038


WARNING


c Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an acci- dent, you could be thrown into it and receive neck or other serious inju- ries. You could also slide under the lap belt and receive serious internal injuries.


c For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat and adjust the seat belt properly. See ‘‘Precautions on seat belt usage’’ later in this sec- tion.


1-2 Seats, restraints and supplemental air bag systems


Z X


APD0532


APD0531


Forward and backward Pull the lever up while you slide the seat forward or backward to the desired position. Release the lever to lock the seat in position.


Reclining To recline the seatback, pull the lever up and lean back. To bring the back of the seat forward again, pull the lever and move your body forward. The seatback moves forward.


Seats, restraints and supplemental air bag systems 1-3


Z X


CAUTION


When returning the seat to its original position, check that the seat and seat- back are properly locked.


APD0615


TILTING FRONT SEAT (Two-door model) The front passenger seat can be tilted to make it easier for the rear seat passengers to get in and out of the vehicle. To tilt the front seatback forward, pull the reclining lever up or depress the tilt lever. The seat back tilts and the seat moves forward automatically. To return the seat, move the whole seat backward, then push the seat back up until it locks.


1-4 Seats, restraints and supplemental air bag systems


ARS1023


HEAD RESTRAINTS Adjust the head restraints so the top is level with the tops of your ears. To raise the head restraint, pull it up. To lower, press the lock knob down while push- ing the head restraint down.


WARNING


Head restraints should be adjusted properly as they may provide significant protection against injury in an accident. Do not remove them. Check the adjust- ment after someone else uses the seat.


Z X


SUPPLEMENTAL RESTRAINT SYSTEM (AIR BAG SYSTEM)


This Supplemental Restraint System sec- tion contains important information concern- ing the driver and passenger supplemental air bags. The Supplemental Restraint Sys- tem Air Bag can help reduce impact force to the driver and to the front passenger in certain frontal collisions. The supplemental air bags are designed to supplement the crash protection provided by the driver and front passenger seat belts and are not a substitute for them. The seat belts should always be correctly worn and the driver and front passenger seated a suitable distance from the steering wheel and instrument panel. (See ‘‘Seat belts’’ for instructions and precautions on seat belt usage.) The supplemental air bags operate only when the ignition switch is in the ON or START position.


REAR SEAT Interior trunk access (if so equipped) The trunk can be accessed from the rear seat for loading and unloading, as shown.


WARNING


c Never allow anyone to ride in the luggage area or on the rear seat when it is in the fold-down position. Use of these areas by passengers without proper could


restraints


ARS1022


result in serious injury in an accident or sudden stop.


c Properly secure all cargo to help pre- vent it from sliding or shifting. Do not place cargo higher than the seat- backs. In a sudden stop or collision, unsecured cargo could cause per- sonal injury.


c When returning the seatbacks to the upright position, be certain they are completely secured in the latched position.


Seats, restraints and supplemental air bag systems 1-5


Z X


c Keep hands on the outside of the steering wheel. Placing them inside the steering wheel rim could increase the risk that they are injured when the air bag inflates.


ARS1030


ARS1039


WARNING


c The supplemental air bags ordinarily will not inflate in the event of a side impact, rear impact, roll over, or lower severity frontal collision. Al- ways wear your seat belts to help reduce the risk or severity of injury in various kinds of accidents.


c The seat belts and the supplemental air bags are most effective when you are sitting back and upright in the seat. Supplemental air bags inflate with great If you are unre-


force.


leaning forward, sitting strained, sideways or out of position in any way, you are at greater risk of injury or death in a crash and may also receive serious or fatal injuries from the supplemental air bag if you are up against it when it inflates. Always sit back against the seatback and as far away as practical from the steering wheel or instrument panel. Always use the seatbelts.


1-6 Seats, restraints and supplemental air bag systems


Z X


ARS1037


ARS1040


ARS1041


Seats, restraints and supplemental air bag systems 1-7


ARS1042


Z X


WARNING


c Never let children ride unrestrained. Do not attempt to hold them in your lap or arms. Some examples of dan- gerous riding positions are shown in the previous illustrations.


c Children may be severely injured or killed when the supplemental air bag inflates if they are not properly re- strained.


c Also, never install a rear-facing child restraint in the front seat. An inflat- ing supplemental air bag could seri- ously injure or kill your child. See ‘‘Child Restraints’’ for details.


ARS1043


ARS1045


1-8 Seats, restraints and supplemental air bag systems


ARS1044


ARS1046


Z X


SUPPLEMENTAL AIR BAG SYSTEM


APD0644


the steering wheel;


The driver supplemental air bag is located in the center of the front passenger supplemental air bag is mounted in the dashboard above the glove box. These systems are designed to meet op- tional certification requirements under U.S. regulations. They are also permitted in Canada. The optional certification allows air bags to be designed to inflate somewhat less forcefully than previously. However, all of the information, cautions and warn- ings in this manual still apply and must be followed. The supplemental air bag system is de-


signed to inflate in higher severity frontal collisions, although it may inflate if the forces in another type of collision are similar to those of a higher severity frontal impact. It may not inflate in certain frontal collisions. Vehicle damage (or lack of it) is not always an indication of proper supplemental air bag operation. When the supplemental air bag inflates, a fairly loud noise may be heard, followed by the release of smoke. This smoke is not harmful and does not indicate a fire, but care should be taken to not unintentionally inhale it, as it may cause irritation and


choking. Those with a history of breathing trouble should get fresh air promptly. The supplemental air bags, along with the use of seat belts, help to cushion the impact force on the face and chest of the occupant. They can help save lives and reduce seri- ous injuries. However, an inflating supple- mental air bag may cause facial abrasions or other injuries. Supplemental air bags do not provide restraint to the lower body. Seat belts should be correctly worn, and the driver and passenger seated upright as far as practical away from the steering wheel or dashboard. Since the supplemental air bag inflates quickly in order to help protect the occupant, the force of the supplemental air bag inflating can increase the risk of injury if the occupant is too close to or is against the supplemental air bag module during inflation. The supplemental air bag deflates quickly after a collision. The supplemental air bags operate only when the ignition switch is in the ON or START position.


Seats, restraints and supplemental air bag systems 1-9


Z X


When selling your vehicle, we request that you inform the buyer about the supplemental air bag system and guide the buyer to the appropriate sections in this Owner’s Manual.


WARNING


c Do not place any objects on the steer- ing wheel pad or on the instrument panel. Also, do not place any objects between any occupant and the steer- ing wheel or instrument panel. Such objects may become dangerous pro- jectiles and may cause injury if the supplemental air bag inflates.


c Right after inflation, several supple- mental air bag system components will be hot. Do not touch them; you may severely burn yourself.


c No unauthorized changes should be made to any components or wiring of the supplemental air bag system. This is to prevent accidental inflation of the supplemental air bag or damage to the supplemental air bag system.


c Do not make unauthorized changes to your vehicle’s electrical system, suspension system or front end structure. This could affect proper operation of the supplemental air bag system.


c Tampering with the supplemental air bag system may result in serious personal injury. Tampering includes changes to the steering wheel and the instrument panel assembly by placing material over the steering wheel pad and above the instrument panel, or by installing additional trim material around the supplemental air bag system.


c Work around and on the supplemen- tal air bag system should be done by an authorized NISSAN dealer. Instal- lation of electrical equipment should also be done by an authorized NIS- SAN dealer. The yellow SRS wiring should not be modified or discon- nected. Unauthorized electrical test equipment and probing devices should not be used on the supple- mental air bag system.


c The SRS wiring harnesses are cov- ered with yellow insulation either just before the harness connectors or on the complete harness for easy identification.


1-10 Seats, restraints and supplemental air bag systems


Z X


WARNING LABELS


SUPPLEMENTAL AIR BAG WARNING LIGHT


Warning labels about the supplemental air bag system are placed in the vehicle as shown in the illustration.


APD0645


APD0610


The supplemental air bag warning light, displaying AIR BAG in the instrument panel, monitors the circuits of the supplemental air bag. The circuits monitored by the supple- mental air bag light are the diagnosis sensor


Seats, restraints and supplemental air bag systems 1-11


Z X


unit, supplemental air bag modules and all related wiring. When the ignition key is in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the supplemental air bag needs servicing: 1. The supplemental air bag light does not come on and remain on for 7 seconds and then go off as described above.


2. The supplemental air bag light flashes


intermittently or remains on.


3. The supplemental air bag light does not


come on at all.


Under these conditions, the Supplemental Restraint System Air Bag may not operate properly. It must be checked and repaired. Take your vehicle to the nearest authorized NISSAN dealer.


WARNING


If the supplemental air bag warning light is on, it could mean that the supplemen- tal air bag system will not operate in an accident.


Repair and replacement procedure The supplemental air bag system is de- signed to inflate on a one-time-only basis. As a reminder, unless it is damaged, the supplemental air bag light remains illumi- nated after inflation has occurred. Repair and replacement of the supplemental air bag system should be done only by an authorized NISSAN dealer. After a supplemental air bag inflates, the front instrument panel assembly should be replaced by an authorized NISSAN dealer if damaged. To ensure long-term functioning, the system must be inspected 10 years after the date of manufacture as noted on the certification label located on the driver side front pillar. When maintenance work is required on the vehicle, the supplemental air bag system and related parts should be pointed out to the person performing the maintenance. The ignition key should always be in the LOCK position when working under the hood or inside the vehicle.


1-12 Seats, restraints and supplemental air bag systems


WARNING


c Once the supplemental air bag in- flates, the supplemental air bag module will not function again and must be replaced. The supplemental air bag module cannot be repaired. c The supplemental air bag system should be inspected by an autho- rized NISSAN dealer if there is any damage to the front end portion of the vehicle, or replaced if the supple- mental air bag has inflated.


an


c If you need to dispose of a supple- mental air bag or scrap the vehicle, contact authorized NISSAN dealer. Correct supplemental air bag disposal procedures are set forth in the appropriate NISSAN Service Manual. Incorrect disposal proce- dures could cause personal injury.


Z X


SEAT BELTS


ARS1048


ARS1047


ARS1050


PRECAUTIONS ON SEAT BELT USAGE If you are wearing your seat belt properly adjusted, your chances of being injured or killed in an accident and/or the severity of injury may be greatly reduced. NISSAN strongly encourages you and all of your passengers to buckle up every time you drive, even if your seating position includes a supplemental air bag. Most states and all Canadian provinces or territories require that seat belts be worn at all times when a vehicle is being driven.


WARNING


c Every person who drives or rides in this vehicle should use a seat belt at all times. Children should be prop- erly restrained and, if appropriate in a child restraint.


c The belt should be properly adjusted to a snug fit. Failure to do so may reduce the effectiveness of the en- tire restraint system and increase the chances or severity of injury in an accident. Serious injury or death can occur if the seat belt is not worn properly.


c Always route the shoulder belt over your shoulder and across your chest. Never run the belt behind your back, under your arm or across your neck. The belt should be away from your face and neck, but not falling off your shoulder.


c Position the lap belt as low as pos- sible AROUND THE HIPS, NOT THE WAIST. A lap belt worn too high could increase the risk of internal injuries in an accident.


c Be sure the seat belt tongue is se- curely fastened to the proper buckle.


Seats, restraints and supplemental air bag systems 1-13


Z X


c Do not wear the belt inside out or twisted. Doing so may reduce its effectiveness.


c Do not allow more than one person


to use the same belt.


c Never carry more people in the ve-


hicle than there are seat belts.


c If the seat belt warning lamp glows continuously while the ignition is turned ON with all doors closed and all seat belts fastened, it may indi- cate a malfunction in the system. Have the system checked by an au- thorized NISSAN dealer.


c All seat belt assemblies including re- tractors and attaching hardware should be inspected after any colli- sion at an authorized NISSAN dealer. NISSAN recommends that all seat belt assemblies in use during a colli- sion be replaced unless the collision was minor and the belts show no damage and continue to operate properly. Seat belt assemblies not in use during a collision should also be inspected and replaced if either dam- age or improper operation is noted.


1-14 Seats, restraints and supplemental air bag systems


Z X


CHILD SAFETY Children need adults to help protect them. They need to be properly restrained. The proper restraint depends on the child’s size. Generally, infants (up to about one year and less than 20 pounds) should be placed in rear facing child restraints. Front facing child restraints are available for children who out- grow rear facing child restraints.


WARNING


Infants and children need special pro- tection. The vehicle’s seat belts may not fit them properly. The shoulder belt may come too close to the face or neck. The lap belt may not fit over their small hip bones. In an accident, an improp- erly fitting seat belt could cause seri- ous or fatal injury. Always use appro- priate child restraints.


All U.S. States and Canadian provinces require the use of approved child restraints for infants and small children. See ‘‘Child Restraints’’ later in this section. In addition, there are many types of child restraints available for larger children which should be used for maximum protection.


NISSAN recommends that all preteens and children be restrained in the rear seat if possible. According to accident statistics, children are safer when properly restrained in the rear seat than in the front seat. This is especially important because your ve- hicle has a supplemental restraint system (Air bag system) for the front passenger. See ‘‘Supplemental restraint system’’ ear- lier in this section. Infants and small children NISSAN recommends that infants and small children be placed in child restraints that comply with Federal Motor Vehicle Safety Standards or Canadian Motor Vehicle Safety Standards. You should choose a child restraint fits your vehicle and always follow the manufacturer’s instruc- tions for installation and use. Larger children Children who are too large for child re- straints should be seated and restrained by the seat belts which are provided. If the child’s seating position has a shoulder belt that fits close to the face or neck, the use of a booster seat (commercially avail- able) may help overcome this. The booster seat should raise the child so that the shoul-


that


der belt is properly positioned across the top, middle portion of the shoulder and the lap belt is low on the hips. The booster seat should fit the vehicle seat and have a label certifying that it complies with Federal Motor Vehicle Safety Standards or Canadian Mo- tor Vehicle Safety Standards. Once the child has grown so the shoulder belt is no longer on or near the face and neck, use the shoulder belt without the booster seat.


WARNING


Never let a child stand or kneel on any seat and do not allow a child in the cargo areas while the vehicle is mov- ing. The child could be seriously in- jured or killed in an accident.


PREGNANT WOMEN NISSAN recommends that pregnant women use seat belts. Contact your doctor for spe- cific recommendations. The lap belt should be worn snug and positioned as low as possible around the hips, not the waist. INJURED PERSONS NISSAN recommends that injured persons use seat belts. Check with your doctor for specific recommendations.


Seats, restraints and supplemental air bag systems 1-15


Z X


ries. You could also slide under the lap belt and receive serious internal injuries.


c For the most effective protection when the vehicle is in motion, the seat should be upright. Always sit well back in the seat and adjust the seat belt properly.


ARS1051


THREE-POINT TYPE WITH RE- TRACTOR


WARNING


c Every person who drives or rides in this vehicle should wear a seat belt at all times.


c Do not ride in a moving vehicle when the seatback is reclined. This can be dangerous. The shoulder belt will not be against your body. In an acci- dent, you could be thrown into it and receive neck or other serious inju-


1-16 Seats, restraints and supplemental air bag systems


ARS1052


Fastening the belts 1. Adjust the seat. 2. Slowly pull the seat belt out of the retrac- tor and insert the tongue into the buckle until it clicks.


The retractor is designed to lock during a sudden stop or on impact. A slow pulling motion permits the belt to move, and allows you some freedom of move- ment in the seat. 3. Position the lap belt portion low and


snug on the hips as shown.


Z X


The automatic locking mode should be used only for child restraint installation. During normal seat belt use by a passen- ger, the automatic locking mode should not be activated. If it is activated it may cause uncomfortable seat belt tension. Unfastening the seat belts To unfasten the belt, press the button on the buckle. The seat belt automatically retracts. Checking seat belt operation (Three-point type seat belt with re- tractor) Your seat belt retractors are designed to lock belt movement by two separate methods: 1) When the belt is pulled quickly from the


retractor.


2) When the vehicle slows down rapidly. To increase your confidence in the belts, check the operation as follows: c Grasp the shoulder belt and pull forward quickly. The retractor should lock and restrict further belt movement.


If the retractor does not lock during this check or if you have any question about belt opera- tion, see an authorized NISSAN dealer.


ARS1053


4. Pull the shoulder belt portion toward the


retractor to take up extra slack.


The front seat passenger side seat belt and rear Three-point seat belts have a cinching mechanism for child restraint installation. It is referred to as the automatic locking mode. When the automatic locking mode is acti- vated, the seat belt cannot be withdrawn again until the seat belt tongue is detached from the buckle and fully retracted. Once retracted, the seat belt is in the emergency locking mode. For additional information, see ‘‘Child Restraints’’ later in this section.


APD0617


Shoulder belt height adjustment (for front seats, four-door only) The shoulder belt anchor height should be adjusted to the position best for you. (See ‘‘Precautions on Seat Belt Usage’’ earlier in this section.) To adjust, press both release buttons and move the shoulder belt anchor to the desired position so the belt passes over the center of the shoulder. The belt should be away from your face and neck, but not falling off of your shoulder. Release the buttons to lock the shoulder belt anchor into position.


Seats, restraints and supplemental air bag systems 1-17


Z X


WARNING


c After adjustment, release the but- tons and try to move the shoulder belt anchor up and down to make sure it is securely fixed in position. c The shoulder belt anchor height should be adjusted to the position best for you. Failure to do so may reduce the effectiveness of the en- tire restraint system and increase the chance or severity of injury in an accident.


APD0627


ARS1055


TWO-POINT TYPE WITHOUT RE- TRACTOR (rear center lap belt) Selecting correct set of belts The center seat belt buckle and tongue are identified by the CENTER label. The center seat belt tongue can be fastened into the center seat belt buckle only.


Fastening the belts 1. Insert the tongue into the buckle until it clicks. Both the tongue assembly and the buckle are marked CENTER.


1-18 Seats, restraints and supplemental air bag systems


Z X


ARS1056


ARS1057


ARS1076


2. To lengthen, hold the tongue at a right angle to the belt and pull on the belt. To shorten, pull the end of the belt attached to the belt clip away from the tongue, then pull the belt clip to take up the slack.


3. Position the lap belt low on the hips as


illustrated.


Seats, restraints and supplemental air bag systems 1-19


Z X


is not possible to properly fit


SEAT BELT EXTENDERS If, because of body size or driving position, it the lap- shoulder belt and fasten it, an extender is available which is compatible with the in- stalled seat belts. The extender adds ap- proximately 8 inches (200 mm) of length and may be used for either the driver or front passenger seating position. See an autho- rized NISSAN dealer for assistance if the extender is required.


ARS1054


WARNING


Unfastening the belt To unfasten the belt, press the button on the buckle.


c Only NISSAN belt extenders, made by the same company which made the original equipment belts, should be used with NISSAN belts.


c Persons who can use the standard seat belt should not use an extender. Such unnecessary use could result in serious personal injury in the event of an accident.


1-20 Seats, restraints and supplemental air bag systems


SEAT BELT MAINTENANCE c To clean the seat belt webbings, apply a mild soap solution or any solution recommended for cleaning upholstery or carpets. Then brush the webbing, wipe it with a cloth and allow it to dry in the shade. Do not allow the seat belts to retract until they are completely dry.


c If dirt builds up in the shoulder belt guide of the seat belt anchors, the seat belts may retract slowly. Wipe the shoul- der belt guide with a clean, dry cloth.


tongues,


c Periodically check to see that the seat belt and metal components, such as buckles, flexible wires and anchors, work properly. If loose parts, deterioration, cuts or other damage on the webbing is found, the entire seat belt assembly should be replaced.


retractors,


Z X


CHILD RESTRAINTS


WARNING


c Infants and small children should always be placed in an appropriate child restraint while riding in the ve- hicle. Failure to use a child restraint can result in serious injury or death. c Infants and small children should never be carried on your lap. It is not possible for even the strongest adult to resist the forces of a severe acci- dent. The child could be crushed between the adult and parts of the vehicle. Also, do not put the same seat belt around both your child and yourself.


c Never install a rear-facing child re- straint in the front seat. An inflating air bag could seriously injure or kill your child. A rear-facing child restraint must be used only in the rear seat.


c NISSAN recommends that the child restraint system be installed in the rear seat. According to accident sta- tistics, children are safer when prop- erly restrained in the rear seat than in the front seat.


c An improperly installed child re- straint could lead to serious injury or death in an accident.


c In general, child restraints are de- signed to be installed with a lap belt or the lap portion of a three-point type seat belt.


Child restraints for infants and children of various sizes are offered by several manu- facturers. When selecting any child re- straint, keep the following points in mind: c Choose only a restraint with a label certifying that it complies with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Stan- dard 213.


c Check the child restraint in your vehicle to be sure it is compatible with the vehicle’s seat and seat belt system. Choose the child restraint that meets the guidelines of Society of Automotive En- gineers recommended practice J1819
for child seat installation.


c If the child restraint is compatible with your vehicle, place your child in the child restraint and check the various adjust-


ments to be sure the child restraint is compatible with your child. Always fol- low all recommended procedures.


All U.S. States and Canadian provinces require that infants and small children be restrained in approved child restraints at all times while the vehicle is being oper- ated.


WARNING


c Improper use of a child restraint can result in increased injuries for both the infant or child and other occu- pants in the vehicle.


c Follow all of


the child restraint manufacturer’s instructions for in- stallation and use. When purchasing a child restraint, be sure to select one which will fit your child and vehicle. It may not be possible to properly install some types of child restraints in your vehicle.


c If the child restraint is not anchored properly, the risk of a child being injured in a collision or a sudden stop greatly increases.


Seats, restraints and supplemental air bag systems 1-21


Z X


CAUTION


Remember that a child restraint left in a closed vehicle can become very hot. Check the seating surface and buckles before placing your child in the child restraint.


c Adjustable seatbacks should be po- sitioned to fit the child restraint, but as upright as possible.


c After attaching the child restraint, test it before you place the child in it. Tilt it from side to side. Try to tug it forward and check to see if the belt holds the restraint in place. If the restraint is not secure, tighten the belt as necessary, or put the restraint in another seat and test it again.


c For a front-facing child restraint, if the seat position where it is installed has a Three-point type lap/shoulder belt, check to make sure the shoul- der belt does not go in front of the child’s face or neck. If it does, put the shoulder belt behind the child restraint. If you must install a front- facing child restraint in the front seat, see ‘‘Installation on front pas- senger seat’’ later in this section for details.


c When your child restraint is not in use, keep it secured with a seat belt to prevent it from being thrown around in case of a sudden stop or accident.


1-22 Seats, restraints and supplemental air bag systems


ARS1059


Front Facing Installation on rear seat Center lap belt When you install a child restraint in a rear center seat, follow these steps: 1. Position the child restraint on the seat, as illustrated. Always follow the restraint manufacturer’s instructions.


Z X


ARS1060


ARS1061


ARS1062


2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the restraint manufac- turer’s instructions for belt routing.


3. Remove all slack in the lap belt for a very tight fit by pulling forcefully on the lap belt adjustment.


4. Before placing the child in the child re- straint, use force to tilt the child restraint from side to side, and tug it forward to make sure it is securely held in place.


5. If it is not secure, try to tighten the belt again, or put the restraint in another seat. 6. Check to make sure the child restraint is


properly secured prior to each use.


Seats, restraints and supplemental air bag systems 1-23


Z X


ARS1063


ARS1064


ARS1065


Rear Facing Installation on rear seat Center lap belt When you install a child restraint in a rear center seat, follow these steps: 1. Position the child restraint on the seat, as illustrated. Always follow the restraint manufacturer’s instructions.


2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the restraint manufac- turer’s instructions for belt routing.


3. Remove all slack in the lap belt for a very tight fit by pulling forcefully on the lap belt adjustment.


1-24 Seats, restraints and supplemental air bag systems


Z X


When you install a child restraint in a rear outboard seat, follow these steps: 1. Position the child restraint on the seat. Always follow the restraint manufactur- er’s instructions.


ARS1066


ARS1032


4. Before placing the child in the child re- straint, use force to tilt the child restraint from side to side, and tug it forward to make sure it is securely held in place.


5. If it is not secure, try to tighten the belt again, or put the restraint in another seat. 6. Check to make sure the child restraint is


properly secured prior to each use.


Front Facing Installation on rear outboard seating positions


WARNING


c The Three-point belt in your vehicle is equipped with a locking mode re- tractor which must be used when installing a child restraint.


c Failure to do so will result in the child restraint not being properly se- cured. It could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.


Seats, restraints and supplemental air bag systems 1-25


Z X


ARS1068


ARS1031


ARS1078


2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manu- facturer’s instructions for belt routing.


3. Pull on the shoulder belt until all of the belt is fully extended. At this time, the belt retractor is in the automatic locking mode (child restraint mode). It reverts back to emergency locking mode when the belt is fully retracted.


4. Allow the belt to retract. Pull up on the


belt to remove any slack in the belt.


1-26 Seats, restraints and supplemental air bag systems


Z X


When you install a child restraint in a rear outboard seat, follow these steps: 1. Position the child restraint on the seat. Always follow the restraint manufactur- er’s instructions.


ARS1067


ARS1069


5. Before placing the child in the child re- straint, use force to tilt the child restraint from side to side, and tug it forward to make sure that it is securely held in place. 6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode.


7. Check to make sure that the child re- straint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6.


Rear Facing Installation on rear out- board seating positions


WARNING


c The Three-point belt in your vehicle is equipped with a locking mode re- tractor which must be used when installing a child restraint.


c Failure to do so will result in the child restraint not being properly se- cured. It could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.


Seats, restraints and supplemental air bag systems 1-27


Z X


ARS1070


ARS1033


ARS1071


2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manu- facturer’s instructions for belt routing.


3. Pull on the shoulder belt until all of the belt is fully extended. At this time, the belt retractor is in the automatic locking mode (child restraint mode). It reverts back to emergency locking mode when the belt is fully retracted.


4. Allow the belt to retract. Pull up on the


belt to remove any slack in the belt.


1-28 Seats, restraints and supplemental air bag systems


Z X


After the child restraint is removed and the seat belt is allowed to wind back into the retractor, the automatic locking mode (child restraint mode) is canceled; the seat belt only locks during a sudden stop or impact.


ARS1072


5. Before placing the child in the child re- straint, use force to tilt the child restraint from side to side, and tug it forward to make sure that it is securely held in place. 6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode.


7. Check to make sure that the child re- straint is properly secured prior to each use. If the belt is not locked, repeat steps 3 through 6.


ARS1015


TOP STRAP CHILD RESTRAINT If your child restraint has a top strap, it must be secured to the provided anchor point. Anchor bracket hardware must be installed. The top strap anchor bracket hardware is available through an authorized NISSAN dealer. Part #88894-89900
Secure the child restraint with the center lap belt or the lap portion of the outboard Three- point belt and latch the top strap hook onto the anchor bracket.


Seats, restraints and supplemental air bag systems 1-29


Z X


To install the anchor bracket, a metric bolt of the dimensions listed below must be used.


Bolt diameter: 8.0 mm Bolt length: more than 1.18 in (30 mm) Thread pitch: 1.25 mm


Secure the top strap to the attaching bolt which provides the straightest installation of the top strap.


WARNING


Child restraint anchor points are de- signed to withstand only those loads imposed by correctly fitted child re- straints. Under no circumstances are they to be used for adult seat belts or harnesses.


There are pre-cut circles at each anchor point location that should break away from the shelf support material when pressure is applied to them. Remove the bolt after you feel the pre-cut circle separate from the shelf support material.


2. Cut a small slit through the parcel shelf fabric at the anchor point location. Reach through the fabric with a tool such as a pair of needle-nose pliers and remove the pre-cut circle in the parcel shelf sup- port material.


3. Install the bolt through the top strap hook


and into the anchor point nut.


4. Be sure to follow all of the instructions that accompany the top strap attaching hardware.


APD0635


Anchor point locations Anchor points are located under the rear parcel shelf finisher. To use attaching hardware for child re- straints with top straps, follow these instruc- tions carefully: 1. Open the trunk and find the anchor point nuts on the underside of the rear parcel shelf. Thread a bolt (8.0 mm diameter, 1.25 pitch) up through the nut behind the seating position where the child restraint will be installed and use it to break through the rear parcel shelf support material.


1-30 Seats, restraints and supplemental air bag systems


Z X


WARNING


c The three-point belt in your vehicle is equipped with a locking mode re- tractor which must be used when installing a child restraint.


c Failure to use the retractor’s locking mode will result in the child restraint not being properly secured. The re- straint could tip over or otherwise be unsecured and cause injury to the child in a sudden stop or collision.


ARS1075
Installation on front passenger seat (vehicles with passenger-side air bag)


WARNING


c Never install a rear-facing child re- straint in the front passenger seat. Air bags inflate with great force. A rear- facing child restraint could be struck by the air bag in a crash and could seriously injure or kill your child.


ARS1046


c NISSAN recommends that child re- straints be installed in the rear seat. However, install a forward-facing child restraint in the front passenger seat, move the pas- senger seat to the rear most position.


if you must


A child restraint with a top strap should not be used in the front passenger seat.


Seats, restraints and supplemental air bag systems 1-31


Z X


ARS1036


ARS1073


ARS1034


If you must install a child restraint in the front seat, follow these steps: 1. Position the child restraint on the front passenger seat. It should be placed in a front-facing direction only. Move the seat to the rear most position. Always follow the restraint manufacturer’s in- structions. Child restraints for infants must be used in the rear-facing direc- tion and therefore must not be used in the front seat.


2. Route the seat belt tongue through the child restraint and insert it into the buckle until you hear and feel the latch engage. Be sure to follow the child restraint manu- facturer’s instructions for belt routing.


3. Pull on the shoulder belt until all of the belt is fully extended. At this time, the belt retractor is in the automatic locking mode (child restraint mode). It reverts back to emergency locking mode when the belt is fully retracted.


1-32 Seats, restraints and supplemental air bag systems


Z X


seat belt is allowed to wind back into the retractor, the automatic locking mode (child restraint mode) is canceled; the seat belt only locks during a sudden stop or impact.


ARS1074


ARS1079


4. Allow the belt to retract slightly. Pull up on the belt to remove any slack in the belt.


5. Before placing the child in the child re- straint, use force to tilt the child restraint from side to side, and tug it forward to make sure it is securely held in place.


6. Check that the retractor is in the automatic locking mode by trying to pull more belt out of the retractor. If you cannot pull any more belt webbing out of the retractor, the belt is in the automatic locking mode.


7. Check to make sure the child restraint is properly secured prior to each use. If the lap belt is not locked, repeat steps three through six.


After the child restraint is removed and the


Seats, restraints and supplemental air bag systems 1-33


Z X


MEMO


1-34 Seats, restraints and supplemental air bag systems


Z X


2 Instruments and controls


Meters and gauges ................................................2-2
Speedometer and odometer ..................................2-3
Tachometer (if so equipped)..................................2-3
Engine coolant temperature gauge........................2-3
Fuel gauge .............................................................2-4
Warning/indicator lights and chimes ......................2-5
Theft warning (if so equipped) ...............................2-9
Windshield wiper and washer switch...................2-11
Rear window defogger switch..............................2-12
Headlight and turn signal switch..........................2-13
Daytime running light system (Canada only).......2-13


Instrument brightness control...............................2-14
Front fog light switch (if so equipped)..................2-14
Hazard warning flasher switch.............................2-15
Cigarette lighter (accessory) and ashtray............2-15
Cup holder............................................................2-16
Manual windows...................................................2-17
Power windows (if so equipped)..........................2-17
Sunroof (if so equipped).......................................2-19
Interior light...........................................................2-19
Trunk light (if so equipped) ..................................2-20


Z X


METERS AND GAUGES


2-2 Instruments and controls


AIC1050


Z X


SPEEDOMETER AND ODOMETER


TACHOMETER (if so equipped) ENGINE COOLANT


TEMPERATURE GAUGE


AIC0643


AIC0644


AIC1036


Speedometer The speedometer indicates vehicle speed. Odometer The odometer records the total distance the vehicle has been driven. Trip Odometer The trip odometer records the distance of individual trips. Before each trip, set the trip odometer to zero by pushing the reset button.


The tachometer indicates engine speed in revolutions per minute (r/min).


CAUTION


When engine speed approaches the red zone, shift to a higher gear. Oper- ating the engine in the red zone may cause serious engine damage.


The gauge indicates the engine coolant temperature. The engine coolant temperature varies with the outside air temperature and driving conditions.


Instruments and controls 2-3


Z X


FUEL GAUGE


AIC1035


AIC0606


CAUTION


If the gauge indicates engine coolant temperature over the normal range, stop the vehicle as soon as safely pos- sible. If the engine is overheated, con- tinued operation of the vehicle may seriously damage the engine. See the ‘‘In case of emergency’’ section for the immediate action required.


The gauge indicates the approximate fuel level in the tank. The gauge may move slightly during brak- ing, turning, acceleration, or going up or down hills. The gauge needle remains in approximately the same position, even after the ignition key is turned to OFF. Refill the fuel tank before the gauge registers E (Empty).


CAUTION


If the vehicle is driven with the fuel level very low, the malfunction indicator light may come on. Refuel as soon as possible. After driving for a while, the light should remain off. If the light re- mains on, have the vehicle inspected by an authorized NISSAN dealer. For additional information, see the ‘‘Malfunction indicator light (MIL)’’ later in this section.


2-4 Instruments and controls


Z X


WARNING/INDICATOR LIGHTS AND CHIMES


or


Brake warning light


Turn signal/hazard indicator lights


High beam indicator light (Blue)


O/D OFF


Charge warning light


Door ajar warning light (if so equipped)


Low washer fluid warning light (Canada only)


or


Anti-lock brake warning light (if so equipped)


Overdrive off indicator light (automatic transmission only)


Malfunction indicator light


Engine oil pressure warning light


Cruise indicator light (if so equipped)


Air bag warning light


Seat belt warning light


Low fuel warning light (if so equipped)


Checking bulbs Apply the parking brake and turn the ignition key to ON without starting the engine. The following lights will come on:


or


If equipped, the following lights come on briefly and then go off:


or


If any light fails to come on, it may indicate a burned-out bulb or an open


circuit in the electrical system. Have the system repaired promptly.


‘‘Engine oil’’ in the ‘‘Do-it-yourself’’ section of this manual.


Engine oil pressure warning light


This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call an autho- rized NISSAN dealer. The oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See


CAUTION


Running the engine with the oil pres- sure warning light on could cause seri- ous damage to the engine almost im- mediately. Turn off the engine as soon as it is safe to do so.


Charge warning light


If the light comes on while the engine is running, it may indicate a problem with the Instruments and controls 2-5


Z X


charging system. Turn the engine off and check the generator belt. If the belt is loose, broken, or missing, or if the light remains on, see an authorized NISSAN dealer immedi- ately.


CAUTION


Do not continue driving if the generator belt is loose, broken or missing.


Low fuel warning light (if so equipped)


This light comes on when the fuel in the tank is getting low. Refuel as soon as it is con- venient, preferably before the fuel gauge reaches E (Empty). There will be a small reserve of fuel remain- ing in the tank when the fuel gauge reaches E (Empty).


Door ajar warning light (if so equipped)


This light comes on when any of the doors are not closed securely while the ignition key is ON.


2-6 Instruments and controls


Seat belt warning light and chime


The light and chime remind you to fasten seat belts. The light illuminates whenever the ignition key is turned to ON, and re- mains illuminated until the driver’s seat belt is fastened. At the same time, the chime sounds for about seven seconds unless the driver’s seat belt is securely fastened. Refer to “Seat belts” in the “Seats, restraints and supplemental air bag systems” section for precautions on seat belt usage. Supplemental air bag warning light


When the ignition key is in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the following conditions occur, the supplemental air bag system needs servic- ing and your vehicle must be taken to an authorized NISSAN dealer: 1. The supplemental air bag warning light does not come on and remain on for 7


seconds and then go off as described above.


2. The supplemental air bag warning light


flashes intermittently or remains on.


3. The supplemental air bag warning light


does not come on at all.


Unless checked and repaired, the Supple- mental restraint system (air bag system) may not function properly. For additional details see ‘‘Supplemental Restraint Sys- tem’’ in the ‘‘Seats, restraints and supple- mental air bag systems’’ section of this manual.


WARNING


is on,


If the supplemental air bag warning light the supplemental air bag system will not operate in an accident.


it could mean that


Low washer light (Canada only)


fluid warning


This light comes on when the washer fluid is at a low level. Add washer fluid as necessary. See the ‘‘Do-it-yourself’’ section of this manual.


Z X


Brake warning light functions for both the parking


or This light brake and the foot brake systems. When the ignition key is in the ON position, the light comes on when the parking brake is applied, and also warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 1. Check the brake fluid level. Add brake fluid in the


as necessary. See ‘‘Brake fluid’’ ‘‘Do-it-yourself’’ section of this manual.


2. If the brake fluid level is correct, have the warning system checked by an autho- rized NISSAN dealer.


WARNING


c If the level is below the MINIMUM mark on the brake fluid reservoir, do not drive until the brake system has been checked at an authorized NIS- SAN dealer.


c Your brake system may not be work- ing properly if the warning light is on. Driving could be dangerous. If you judge it to be safe, drive care-


fully to the nearest service station for repairs. Otherwise, have your ve- hicle towed because driving it could be dangerous.


c Pressing the brake pedal with the engine stopped and/or a low brake fluid level may increase your stop- ping distance and braking will re- quire greater pedal effort as well as pedal travel.


or


Anti-lock brake warning light (if so equipped)


If the light comes on while the engine is running, it may indicate something is wrong with the anti-lock portion of the brake sys- tem. Have the system checked by an autho- rized NISSAN dealer. Turn off the engine, and start it again by slowly turning the ignition key (quickly doing so may cause the ABS light to stay on when there is nothing wrong). If the light stays on, have the system checked by an authorized NISSAN dealer. If an abnormality occurs in the system, the anti-lock function ceases, but the regular


braking system continues to operate. If the light comes on while you are driving, contact an authorized NISSAN dealer for repair. O/D OFF Overdrive off indicator light


(automatic transmission models only)


This light comes on when the overdrive switch is pushed to the OFF position.


Turn signal/hazard indicator lights


The appropriate light flashes when the turn signal lever switch is activated. Both lights flash when the hazard switch is turned on.


High beam indicator light


This blue light comes on when the headlight high beam is on and goes out when the low beam is selected.


Cruise indicator light (if so equipped)


The light comes on while the vehicle speed is controlled by the cruise control system.


Instruments and controls 2-7


Z X


Key reminder chime A chime sounds if the driver side door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle. Light reminder chime A chime sounds when the driver side door is opened if the headlights or parking lights are on (ignition switch is turned off). Turn the headlight control switch off before leaving the vehicle. Brake pad wear warning The disc brake pads have audible wear warnings. When a brake pad requires re- placement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not is de- pressed. Have the brakes checked as soon as possible if the warning sound is heard. Malfunction indicator light (MIL)


the brake pedal


If the malfunction indicator light comes on steady or blinks while the engine is running,


2-8 Instruments and controls


it may indicate a potential emission control problem. The malfunction indicator light may also come on steady or blink if the fuel filler cap has not been closed tightly or if the fuel tank is nearly empty. Check to make sure the fuel cap is secure and that you have at least three gallons of fuel in the fuel tank. After driving for a while, the light should remain off if no other potential emission control system problem exists. Operation The malfunction indicator light will come on in one of two ways: 1. Malfunction indicator light on steady - An emission control system malfunction has been detected. Have the vehicle in- spected by an authorized NISSAN dealer. You do not need to have your vehicle towed to the dealer.


2. Malfunction indicator light blinking - An engine misfire has been detected which may damage the emission control sys- tem. To reduce or avoid emission control system damage:


c do not drive at speeds above 45 MPH


(72 km/h).


c avoid hard acceleration or deceleration. c avoid steep uphill grades. c if possible, reduce the amount of cargo


being hauled or towed.


The malfunction indicator light may stop blinking and come on steady. Have the vehicle inspected by an authorized NISSAN dealer. You do not need to have your vehicle towed to the dealer.


CAUTION


Continued vehicle operation without having the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission control system.


Some conditions may cause the malfunc- tion indicator light to come on steady or blink. Examples are as follows: c vehicle ran out of fuel, which caused the


engine to misfire.


Z X


THEFT WARNING (if so equipped)


c fuel filler cap was left off or improperly installed, allowing fuel to evaporate into the atmosphere.


If you suspect that you experienced one or both of the above conditions, drive the ve- hicle to an authorized NISSAN dealer and have the vehicle inspected. Avoid any un- necessary diagnosis during the service by informing the dealer of the conditions listed above that may have occurred.


IC0005


The theft warning system provides visual and audio alarm signals if parts of the vehicle are disturbed. How to activate the theft warning system 1. Close all windows. 2. Remove the key from the ignition switch. 3. Close the hood, trunk lid and all doors. 4. Push the button on the multi-remote controller. All the doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked.


c When the


button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a reminder that the doors are already locked. The horn may or may not beep once. Refer to ‘‘silencing the horn beep feature’’ later in this section. The system can be activated even if the windows are open. 5. Confirm that


the SECURITY indicator light comes on. The SECURITY light glows for about 30 seconds and then begins to flash once every three seconds. The system is now activated. If, during this 30-second time period, the door is unlocked by the key or the multi-remote controller, or the ignition key is turned to ACC or ON, the system will not activate. c If the key is turned slowly when lock- ing the door, the system may not acti- vate. Furthermore, if the key is turned excessively to the unlock position, the system may be deactivated when the key is removed. If the indicator light fails to glow for 30 seconds, unlock the door once and lock it again.


c Even when the driver and/or passen- gers are in the vehicle, the system will Instruments and controls 2-9


Z X


again. The alarm can be shut off by unlocking a door or trunk lid with the key button on the or by pressing the multi-remote controller.


The alarm is activated by: c opening the door or trunk lid without using the key (even if the door is un- locked by releasing the door inside lock switch) or opening the trunk lid by oper- ating the opener lever.


c opening the hood. c pushing in or pulling out the key cylinder


on the door or trunk lid. How to stop the alarm The alarm stops only by unlocking a door or the trunk lid with the key or by pressing button on the multi-remote control- the ler. The alarm does not stop if the ignition switch is turned to ACC or ON position.


activate with all doors, hood, and trunk lid locked and ignition key off. Turn the ignition key to ACC or ON to turn the system off.


The theft warning system is NOT activated if one of the following occurs: c A door is unlocked or the ignition key is turned to the ACC or ON position during the 30 seconds in which the SECURITY light stays on.


c The SECURITY light blinks at a steady 1/2 second on - 1/2 second off rate (a door, the trunk, or the hood is open and the key is not in the ACC or ON position). When the ignition key is turned to the ACC or ON position, the SECURITY light turns off.


Theft warning system operation The theft warning system emits the follow- ing alarm:

Loading...
x