Download PDF Manual

is damaged, the supplemental air bag warning light remains illuminated after inflation has oc- curred. Repair and replacement of these supple- mental air bag systems should be done only by a NISSAN dealer. When maintenance work is required on the ve- hicle, the supplemental front air bags, supple- mental side air bags, curtain side-impact air bags, pre-tensioner seat belts and related parts should be pointed out to the person performing the maintenance. The ignition key should always be in the LOCK position when working under the hood or inside the vehicle. 1-66 Safety(cid:151)Seats, seat belts and supplemental restraint system


c If you need to dispose of the supple- mental air bag, pre-tensioner seat belt system or scrap the vehicle, contact a NISSAN dealer. Correct supplemental air bag and pre-tensioner seat belt sys- tem disposal procedures are set forth in the appropriate NISSAN Service Manual. Incorrect disposal procedures could cause personal injury.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


MEMO


Safety(cid:151)Seats, seat belts and supplemental restraint system 1-67


2 Instruments and controls


Instrument panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2
Meters and gauges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3
Speedometer and odometer . . . . . . . . . . . . . . . . . . . . . 2-4
Tachometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4
Engine coolant temperature gauge . . . . . . . . . . . . . . . 2-5
Fuel gauge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5
Warning/indicator lights and audible reminders . . . . . . . 2-7
Checking bulbs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7
Warning lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8
Indicator lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11
Audible reminders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Security systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Vehicle security system. . . . . . . . . . . . . . . . . . . . . . . . . 2-14
Nissan vehicle immobilizer system . . . . . . . . . . . . . . . 2-16
Windshield wiper and washer switch . . . . . . . . . . . . . . . 2-17
Switch operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17
Rear window wiper and washer switch. . . . . . . . . . . . . . 2-18
Rear window and outside mirror (if so equipped) defroster switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18
Headlight and turn signal switch. . . . . . . . . . . . . . . . . . . . 2-19
Headlight control switch. . . . . . . . . . . . . . . . . . . . . . . . 2-19
Daytime running light system (Canada only) . . . . . . 2-21
Instrument brightness control . . . . . . . . . . . . . . . . . . . 2-22


Turn signal switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-23
Fog light switch (if so equipped) . . . . . . . . . . . . . . . . 2-23
Cornering light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-24
Hazard warning flasher switch . . . . . . . . . . . . . . . . . . . . . 2-24
Horn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-25
Heated seat (if so equipped). . . . . . . . . . . . . . . . . . . . . . . 2-25
Traction control system (TCS) off switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26
Vehicle dynamic control (VDC) off switch (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26
Rear sonar system off switch (if so equipped). . . . . . . . 2-26
Power outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-28
Sunglasses holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-28
Instrument panel storage . . . . . . . . . . . . . . . . . . . . . . . 2-28
Console box (if so equipped) . . . . . . . . . . . . . . . . . . . 2-29
Center tray table (if so equipped). . . . . . . . . . . . . . . . 2-30
Glove box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Map pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-31
Seatback pockets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Grocery hooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Cargo net . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-32
Overhead console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Cup holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-33
Cargo organizer (if so equipped) . . . . . . . . . . . . . . . . 2-35
3rd row armrest bin . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-36
Cargo area storage bin. . . . . . . . . . . . . . . . . . . . . . . . . 2-36
Garment hook. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
Head restraint storage . . . . . . . . . . . . . . . . . . . . . . . . . 2-37
Roof rack (if so equipped) . . . . . . . . . . . . . . . . . . . . . . 2-37
Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-38
Power windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-38
Power vent windows (if so equipped) . . . . . . . . . . . . 2-40
Manual vent windows (if so equipped) . . . . . . . . . . . 2-41
SkyView(cid:153) glass-paneled roof (if so equipped) . . . . . . . 2-41
Sunroof (if so equipped). . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41
Automatic sunroof . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-41


Lights on demand switch . . . . . . . . . . . . . . . . . . . . . . . . . . 2-43
Personal lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-44
Map lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
Console light. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-45
HomeLinkT universal transceiver (if so equipped). . . . . 2-46
Programming HomeLinkT. . . . . . . . . . . . . . . . . . . . . . . 2-46
Programming HomeLinkT for Canadian customers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Operating the HomeLinkT universal transceiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-48
Programming trouble-diagnosis . . . . . . . . . . . . . . . . . 2-48
Clearing the programmed information . . . . . . . . . . . . 2-48
Reprogramming a single HomeLinkT button . . . . . . 2-48
If your vehicle is stolen . . . . . . . . . . . . . . . . . . . . . . . . . 2-49


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


INSTRUMENT PANEL


1. 2.


3.


4.


Ventilators (P. 4-31) Headlight/fog light (if so equipped)/turn signal switch (P. 2-19) Steering wheel switch for audio control/BluetoothT hands-free phone system (if so equipped) (P. 4-59) Driver supplemental air bag/horn (P. 1-51, P. 2-25)


5. Meters and gauges (P. 2-3) 6.


Cruise control main/set switches (P. 5-15)


7. Windshield wiper/washer switch and


rear window wiper/washer switch (P. 2-17, 2-18) Display screen/Navigation system* (P. 4-2, P. 4-7, P. 4-17) Front passenger supplemental air bag (P. 1-51)


8.


9.


10. Glove box (P. 2-31) 11. Front passenger air bag status light


(P. 1-59)


12. Hazard warning flasher switch (P. 2-24) 13. Climate controls (P. 4-31, 4-40) 14. Audio system controls (P. 4-43) 15. Display screen/Navigation system*


controls (P. 4-2, P. 4-7, P. 4-17)


2-2 Instruments and controls


LIC0928


16. Power outlets (P. 2-27)


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


METERS AND GAUGES


Ignition switch (P. 5-8)


17. Shift selector lever (P. 5-10) 18. 19. Tilt steering wheel control (P. 3-21) 20. Rear sonar system off switch


(if so equipped) (P. 2-26)


21. Vehicle dynamic control (VDC) off


switch (if so equipped) or Traction con- trol system (TCS) off switch (if so equipped) (P. 2-26, P. 2-26) 22. Lights on demand switch (P. 2-43) *: Refer to the separate Navigation System Own- er(cid:146)s Manual (if so equipped). See the page number indicated in paren- theses for operating details.


Tachometer


1. 2. Warning/indicator lights 3. 4. 5. 6. Odometer/Twin trip odometer


Speedometer Engine coolant temperature gauge Fuel gauge


Speedometer


1. 2. Odometer/twin trip display 3. Change button


LIC0929


Instruments and controls 2-3


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


LIC0930


LIC0953


LIC0931


SPEEDOMETER AND ODOMETER Speedometer The speedometer indicates vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). Odometer/Twin trip odometer The odometer/twin trip odometer is displayed when the ignition key is in the ON position. The odometer records the total distance the ve- hicle has been driven. The twin trip odometer records the distance of individual trips. 2-4 Instruments and controls


! Trip


Changing the display: Pushing the change button changes the display as follows: ! Trip Trip Resetting the trip odometer: Pushing the change button for more than 1 sec- ond resets the trip odometer to zero. Elapsed time, driving distance and average speed information is also available. Refer to (cid:147)Control panel buttons(cid:148) in the (cid:147)Display screen, heater, air conditioner, audio and phone systems(cid:148) section later in this manual.


TACHOMETER The tachometer indicates engine speed in revo- lutions per minute (rpm). Do not rev the engine into the red zone s1 .


CAUTION


When engine speed approaches the red zone, shift to a higher gear. Operating the engine in the red zone may cause serious engine damage.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


LIC0932
ENGINE COOLANT TEMPERATURE GAUGE The gauge indicates the engine coolant tempera- ture. The engine coolant temperature is within the normal range s1 when the gauge needle points within the zone shown in the illustration.


The engine coolant temperature varies with the outside air temperature and driving conditions.


CAUTION


If the gauge indicates coolant tempera- ture near the hot (H) end of the normal range, reduce vehicle speed to decrease temperature. If the gauge is over the nor- mal range, stop the vehicle as soon as safely possible. If the engine is over- heated, continued operation of the ve- hicle may seriously damage the engine. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emergency(cid:148) section for immediate action required.


LIC0933


FUEL GAUGE The gauge indicates the approximate fuel level in the tank.


The gauge may move slightly during braking, turning, acceleration, or going up or down hills.


The gauge needle returns to E (Empty) after the ignition key is turned to OFF.


The low fuel warning light comes on when the amount of fuel in the tank is getting low. Refill the fuel tank before the gauge regis- ters E (Empty).


Instruments and controls 2-5


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


The located on the driver(cid:146)s side of the vehicle.


indicates that the fuel-filler door is


CAUTION


c If


the vehicle runs out of


fuel, malfunction indicator light the (MIL) may come on. Refuel as soon as possible. After a few driving trips, the light should turn off. If the light remains on after a few driving trips, have the vehicle inspected by a NISSAN dealer.


c For additional information, see (cid:147)Mal- function indicator light (MIL)(cid:148) later in this section.


2-6 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS


or


or


Anti-lock braking warning light


Seat belt warning light and chime


Front passenger air bag status light


Brake warning light


Supplemental air bag warning light


Security indicator light


Charge warning light


Automatic transmission position indicator light


Slip indicator light


Door open warning light


Cruise main switch indicator light


Traction control system off indicator light (if so equipped)


Engine oil pressure warning light


Cruise set switch indicator light


Turn signal/hazard indicator lights


Low fuel warning light


High beam indicator light (Blue)


Vehicle dynamic control off indicator light (if so equipped)


Low tire pressure warning light


Malfunction indicator light (MIL)


Low windshield washer fluid warning light


Overdrive off indicator light


CHECKING BULBS With all doors closed, apply the parking brake and turn the ignition key to the ON position without starting the engine. The following lights will come on:


or


The following lights come on briefly and then go off:


or


If any light fails to come on, it may indicate a burned-out bulb or an open circuit in the electrical system. Have the system repaired promptly.


Instruments and controls 2-7


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WARNING LIGHTS


or


Anti-lock braking warning light


If the light comes on while the engine is running, it may indicate the anti-lock braking system is not functioning properly. Have the system checked by a NISSAN dealer.


If a malfunction occurs in the system, the anti- lock function is turned off, but the regular braking system continues to operate. If the light comes on while you are driving, contact a NISSAN dealer for repair.


or


Brake warning light


This light functions for both the parking brake and the foot brake systems. Parking brake indicator


When the ignition key is in the ON position, the light comes on when the parking brake is applied. Low brake fluid warning light


When the ignition key is in the ON position, the light warns of a low brake fluid level. If the light comes on while the engine is running with the parking brake not applied, stop the vehicle and perform the following: 2-8 Instruments and controls


1. Check the brake fluid level. Add brake fluid as necessary. See (cid:147)Brake fluid(cid:148) in the (cid:147)Main- tenance and do-it-yourself(cid:148) section of this manual.


2.


If the brake fluid level is correct, have the warning system checked by a NISSAN dealer.


WARNING


c Your brake system may not be working properly if the warning light is on. Driv- ing could be dangerous. If you judge it to be safe, drive carefully to the nearest service station for repairs. Otherwise, have your vehicle towed because driv- ing it could be dangerous.


c Pressing the brake pedal with the en- gine stopped and/or a low brake fluid level may increase your stopping dis- tance and braking will require greater pedal effort as well as pedal travel.


c If the brake fluid level


is below the MINIMUM or MIN mark on the brake fluid reservoir, do not drive until the brake system has been checked at a NISSAN dealer.


Charge warning light


If this light comes on while the engine is running, it may indicate the charging system is not func- tioning properly. Turn the engine off and check the generator belt. If the belt is loose, broken, missing, or if the light remains on, see a NISSAN dealer immediately.


CAUTION


Do not continue driving if the generator belt is loose, broken or missing.


Door open warning light


This light comes on when any of the doors are not closed securely while the ignition key is in the ON position.


Engine oil pressure warning light


This light warns of low engine oil pressure. If the light flickers or comes on during normal driving, pull off the road in a safe area, stop the engine immediately and call a NISSAN dealer or other authorized repair shop.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


The engine oil pressure warning light is not designed to indicate a low oil level. Use the dipstick to check the oil level. See (cid:147)Engine oil(cid:148) in the (cid:147)Maintenance and do-it-yourself(cid:148) section of this manual.


CAUTION


Running the engine with the engine oil pressure warning light on could cause se- rious damage to the engine almost imme- diately. Such damage is not covered by warranty. Turn off the engine as soon as it is safe to do so.


Low fuel warning light


This light comes on when the fuel level in the fuel tank is getting low. The low fuel warning chime will also sound under certain conditions. See (cid:147)Low fuel warning chime(cid:148) later in this section.


Refuel as soon as it is convenient, preferably before the fuel gauge reaches E (Empty). There will be a small reserve of fuel in the tank when the fuel gauge needle reaches E (Empty).


Low tire pressure warning light


Your vehicle is equipped with a Tire Pressure Monitoring System (TPMS) that monitors the tire pressure of all tires except the spare.


The low tire pressure warning light warns of low tire pressure or indicates that the TPMS is not functioning properly. After the ignition switch is turned ON, this light illuminates for about 1 second and turns off. Low tire pressure warning (for models with- out MichelinT PAXT tires only): If the vehicle is being driven with low tire pres- sure, the warning light will illuminate. If you select the tire pressure information in the display, the LOW PRESSURE warning message will be dis- played. The tire pressure for each tire will also be displayed. When the low tire pressure warning light illumi- nates, you should stop and adjust the tire pres- sure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the light OFF. For additional information, see (cid:147)Tire pressure monitoring system (TPMS)(cid:148) in the (cid:147)Starting and driving(cid:148) section and in the (cid:147)In case of emergency(cid:148) section.


Low tire pressure warning (for models with MichelinT PAXT tires only):


If the vehicle is being driven with low tire pressure the warning light will illuminate. If you select the tire pressure information in the display, the LOW PRESSURE warning message will be displayed. The tire pressure for each tire will also be dis- played.


When the low tire pressure warning light illumi- nates, you should stop and adjust the tire pres- sure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the light OFF. Flat tire warning (for models with Mich- elinT PAXT tires only):


If the vehicle is being driven with one or more flat tires, the warning light will flash continuously and a chime will sound for 10 seconds.


The chime will only sound at the first indication of a flat tire and the warning light will flash continu- ously. When the flat tire warning is activated, have the system reset and the tire checked and replaced if necessary by a NISSAN dealer or authorized Michelin PAX system dealer. Even if the tire is inflated to the specified COLD tire pressure, the warning light will continue to flash until the system is reset by a NISSAN dealer.


Instruments and controls 2-9


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


If you select the tire pressure information in the display, the LOW PRESSURE warning message will be displayed. The tire pressure for each tire will also be displayed.


Your vehicle can be driven for a limited time on a flat tire. See (cid:147)Michelin PAX Tires(cid:148) in the (cid:147)Mainte- nance and do-it-yourself(cid:148) section.


For additional information, see (cid:147)Tire pressure monitoring system (TPMS)(cid:148) in the (cid:147)Starting and driving(cid:148) section and in the (cid:147)In case of emergency(cid:148) section. TPMS malfunction (all models):


If the TPMS is not functioning properly, the low tire pressure warning light will flash for approxi- mately 1 minute when the ignition switch is turned ON. The light will remain on after the 1
minute. Have the system checked by a NISSAN dealer.


For additional information, see (cid:147)Tire pressure monitoring system (TPMS)(cid:148) in the (cid:147)Starting and driving(cid:148) section and in the (cid:147)In case of emergency(cid:148) section.


WARNING


c If the light does not illuminate with the ignition switch turned ON, have the ve- hicle checked by a NISSAN dealer as soon as possible.


c If the light illuminates while driving, avoid sudden steering maneuvers or abrupt braking, reduce vehicle speed, pull off the road to a safe location and stop the vehicle as soon as possible. Serious vehicle damage could occur and may lead to an accident and could result in serious personal injury. Check the tire pressure for all four tires. Adjust the tire pressure to the recommended COLD tire pressure shown on the Tire and Loading Information label to turn the low tire pressure warning light OFF. If the light still illuminates while driving after adjusting the tire pressure, a tire may be flat. If you have a flat tire, re- place it with a spare tire as soon as possible.


c Although you can continue driving with a punctured MichelinT PAXT tire (if so equipped), remember that vehicle han- dling stability is reduced, which could lead to an accident and personal injury. Also, driving a long distance at high speeds may damage the tires.


c Do not drive at speeds above 50 MPH (80 km/h) and do not drive more than 125 miles (200 km) with a punctured MichelinT PAXT tire (if so equipped). The actual distance the vehicle can be driven on a flat tire depends on outside temperature, vehicle load, road condi- tions and other factors.


c Do not tow a trailer when a MichelinT


PAXT tire (if so equipped) is flat.


c When a spare tire is mounted or a wheel is replaced, tire pressure will not be indicated, the TPMS will not function and the low tire pressure warning light will flash. Contact your NISSAN dealer as soon as possible for tire replacement and/or system resetting.


c Replacing tires with those not originally specified by NISSAN could affect the proper operation of the TPMS.


2-10 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


CAUTION


c The TPMS is not a substitute for the regular tire pressure check. Be sure to check the tire pressure regularly.


c If the vehicle is being driven at speeds of less than 16 MPH (25 km/h), the TPMS may not operate correctly.


c Be sure to install the specified size of


tires to the 4 wheels correctly.


Low windshield washer fluid warning light


This light comes on when the windshield washer fluid is at a low level. Add windshield washer fluid as necessary. See (cid:147)Window washer fluid(cid:148) in the (cid:147)Maintenance and do-it-yourself(cid:148) section of this manual.


Seat belt warning light and chime


The light and chime remind you to fasten your seat belts. The light illuminates whenever the ignition key is turned to the ON or START position and remains illuminated until the driver(cid:146)s seat belt is fastened. At the same time, the chime sounds for about 6 seconds unless the driver(cid:146)s seat belt is securely fastened.


The seat belt warning light may also illuminate if the front passenger(cid:146)s seat belt is not fastened when the front passenger(cid:146)s seat is occupied . For 5 seconds after the ignition switch is in the ON position, the system does not activate the warn- ing light for the front passenger.


Refer to (cid:147)Seat belts(cid:148) in the (cid:147)Safety(cid:151)Seats, seat belts and supplemental restraint system(cid:148) section for precautions on seat belt usage.


Supplemental air bag warning light


the following conditions occur,


When the ignition key is in the ON or START position, the supplemental air bag warning light illuminates for about 7 seconds and then turns off. This means the system is operational. If any of the supplemental front air bag, supplemental side air bag (if so equipped), curtain side-impact air bags, and pre-tensioner seat belt systems need servicing and your vehicle must be taken to a NISSAN dealer: c The supplemental air bag warning light re-


mains on after approximately 7 seconds.


c The supplemental air bag warning light


flashes intermittently.


c The supplemental air bag warning light does


not come on at all.


Unless checked and repaired, the supplemental restraint system (air bag system) and/or the pre- tensioner seat belts may not function properly. For additional details see (cid:147)Supplemental restraint system(cid:148) in the (cid:147)Safety(cid:151)Seats, seat belts and supplemental restraint system(cid:148) section of this manual.


WARNING


If the supplemental air bag warning light is on, it could mean that the supplemental front air bag, supplemental side air bag (if so equipped), curtain side-impact air bag systems and/or pre-tensioner seat belt systems will not operate in an accident. To help avoid injury to yourself or others, have your vehicle checked by a NISSAN dealer as soon as possible.


INDICATOR LIGHTS


Automatic transmission position indicator light


When the ignition key is turned to the ON posi- tion, the indicator in the tachometer shows the automatic transmission selector lever position. See (cid:147)Driving the vehicle(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


Instruments and controls 2-11


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Cruise main switch indicator light


High beam indicator light (Blue)


The light comes on when the cruise control main switch is pushed. The light goes out when the main switch is pushed again. When the cruise main switch indicator light comes on, the cruise control system is operational.


Cruise set switch indicator light


The light comes on while the vehicle speed is controlled by the cruise control system. If the light blinks while the engine is running, it may indicate the cruise control system is not functioning prop- erly. Have the system checked by a NISSAN dealer.


Front passenger air bag status light


The front passenger air bag status light ( will be lit and the passenger front air bag will be OFF depending on how the front passenger seat is being used.


For front passenger air bag status light operation, see (cid:147)Front passenger air bag and status light(cid:148) in the (cid:147)Safety (cid:151) Seats, seat belts and supplemental restraint system(cid:148) section of this manual.


2-12 Instruments and controls


This blue light comes on when the headlight high beams are on and goes out when the low beams are selected.


The high beam indicator light also comes on when the passing signal is activated.


Malfunction indicator light (MIL)


If this indicator light comes on steady or blinks while the engine is running, it may indicate a potential emission control malfunction.


The malfunction indicator light may also come on steady if the fuel-filler cap is loose or missing, or if the vehicle runs out of fuel. Check to make sure the fuel-filler cap is installed and closed tightly, and that the vehicle has at least 3 gallons (11.4
liters) of fuel in the fuel tank. After a few driving trips, the light should turn off if no other potential emission control system malfunction exists. If this indicator light comes on steady for 20
seconds and then blinks for 10 seconds when the engine is not running, it indicates that the vehicle is not ready for an emission control sys- tem inspection/maintenance test. See (cid:147)Readi-


ness for inspection/maintenance (I/M) test(cid:148) in the (cid:147)Technical and consumer information(cid:148) section of this manual. Operation


The malfunction indicator light will come on in one of two ways: c Malfunction indicator light on steady (cid:151) An emission control system malfunction has been detected. Check the fuel-filler cap. If the fuel-filler cap is loose or missing, tighten or install the cap and continue to drive the light should turn off after vehicle. The a few driving trips. If the light does not turn off after a few driving trips, have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer.


c Malfunction indicator light blinking (cid:151) An en- gine misfire has been detected which may damage the emission control system. To re- duce or avoid emission control system dam- age:


(cid:150) do not drive at speeds above 45 MPH


(72 km/h).


(cid:150) avoid hard acceleration or deceleration.


(cid:150) avoid steep uphill grades.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


(cid:150) if possible, reduce the amount of cargo


being hauled or towed.


The malfunction indicator light may stop blinking and come on steady. Have the vehicle inspected by a NISSAN dealer. You do not need to have your vehicle towed to the dealer.


CAUTION


Continued vehicle operation without hav- ing the emission control system checked and repaired as necessary could lead to poor driveability, reduced fuel economy, and possible damage to the emission con- trol system.


Overdrive off indicator light


This light comes on when the overdrive function is OFF.


The automatic transmission overdrive function is controlled by the overdrive switch.


See (cid:147)Driving the vehicle(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


Security indicator light


This light blinks whenever the ignition switch is in the LOCK, OFF or ACC position. This function indicates the security system equipped on the vehicle is operational.


For additional tems(cid:148) later in this section.


information, see (cid:147)Security sys-


Slip indicator light


This indicator light will blink when the traction control system is limiting wheel spin. Slippery road conditions may exist if the slip indicator blinks on. If this happens, adjust your driving accordingly.


The slip indicator light also comes on when you turn the ignition key to the ON position. The light will turn off after about 2 seconds if the system is operational. If the light does not come on or does not go off, have the traction control system checked by a NISSAN dealer.


Traction control system off indicator light (if so equipped) This indicator light comes on when the traction control off switch is pushed to OFF. This indi- cates the traction control system is not operating.


Push the traction control off switch again or re- start the engine and the system will operate nor- mally. See (cid:147)Traction control system (TCS)(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual.


The traction control light also comes on when you turn the ignition key to the ON position. The light will turn off after about 2 seconds if the traction control system (TCS) is operational. If the light stays on or comes on along with the SLIP indica- tor light while you are driving, have the traction control system checked by a NISSAN dealer.


While the traction control system is operating, you might feel slight vibration or hear the system working when starting the vehicle or accelerat- ing, but this is normal.


Turn signal/hazard indicator lights


The appropriate light flashes when the turn signal switch is activated.


Both lights flash when the hazard switch is turned on.


Instruments and controls 2-13


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Vehicle dynamic control off indicator light (if so equipped) This indicator light comes on when the vehicle dynamic control off switch is pushed to OFF. This indicates the vehicle dynamic control system is not operating. Push the vehicle dynamic control off switch again or restart the engine and the system will operate normally. See (cid:147)Vehicle dynamic control (VDC) system(cid:148) in the (cid:147)Starting and driving(cid:148) section of this manual. The vehicle dynamic control light also comes on when you turn the ignition key to the ON position. The light will turn off after about 2 seconds if the system is operational. If the light stays on or comes on along with the SLIP indicator light while you are driving, have the vehicle dynamic control system checked by a NISSAN dealer. While the vehicle dynamic control system is op- erating, you might feel slight vibration or hear the system working when starting the vehicle or ac- celerating, but this is normal.


AUDIBLE REMINDERS Brake pad wear warning The disc brake pads have audible wear warnings. When a disc brake pad requires replacement, it makes a high pitched scraping sound when the vehicle is in motion, whether or not the brake pedal is depressed. Have the brakes checked as soon as possible if the warning sound is heard. Key reminder chime A chime sounds if the driver(cid:146)s door is opened while the key is left in the ignition switch. Remove the key and take it with you when leaving the vehicle. Light reminder chime With the ignition switch in the OFF position, a chime sounds when the driver(cid:146)s door is opened if the headlights or parking lights are on. Turn the headlight control switch off before leav- ing the vehicle.


2-14 Instruments and controls


SECURITY SYSTEMS


WIC0834
Your vehicle has two types of security systems: c Vehicle security system c NISSAN Vehicle Immobilizer System VEHICLE SECURITY SYSTEM The vehicle security system provides visual and audible alarm signals if someone opens the doors when the system is armed. It is not, however, a motion detection type system that activates when a vehicle is moved or when a vibration occurs. The system helps deter vehicle theft but cannot prevent it, nor can it prevent the theft of interior or exterior vehicle components in all situations. Al- ways secure your vehicle even if parking for a


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


brief period. Never leave your keys in the ignition, and always lock the vehicle when unattended. Be aware of your surroundings, and park in secure, well-lit areas whenever possible. Many devices offering additional protection, such as component locks, identification markers, and tracking systems, are available at auto supply stores and specialty shops. Your NISSAN dealer may also offer such equipment. Check with your insurance company to see if you may be eligible for discounts for various theft protection features. How to arm the vehicle security system 1. Close all windows. (The system can be armed even if the windows are open.)


2. Remove the key from the ignition switch. 3. Close all doors. Lock all doors. The doors can be locked with the key, power door lock switch or with the keyfob. Keyfob operation: c Push the


button on the keyfob. All doors lock. The hazard lights flash twice and the horn beeps once to indicate all doors are locked.


c When the


button is pushed with all doors locked, the hazard lights flash twice and the horn beeps once as a re- minder that the doors are already locked.


The horn may or may not beep. For vehicles with monochrome screen, refer to (cid:147)Silenc- ing the horn beep feature(cid:148) in the (cid:147)Pre-driving checks and adjustments(cid:148) section later in this manual. For vehicles with color screen, refer to (cid:147)Vehicle electronic systems(cid:148) in the (cid:147)Dis- play screen, heater, air conditioner, audio and phone systems(cid:148) section later in this manual.


4. Confirm that the


indicator light comes on. The light stays on for about 30
seconds. The vehicle security system is now pre-armed. After about 30 seconds the ve- hicle security system automatically shifts into the armed phase. The light begins to flash once every 3 seconds. If, during the 30-second pre-arm time period, the driver(cid:146)s door is unlocked by the key or the keyfob, or the ignition key is turned to ACC or ON, the system will not arm.


c If the key is turned slowly when locking the driver(cid:146)s door, the system may not arm. Furthermore, if the key is turned beyond the vertical position toward the unlock position to remove the key, the system may be disarmed when the key is removed. If the indicator light fails to glow for 30 seconds, unlock the driv- er(cid:146)s door once and lock it again.


c Even when the driver and/or passen- gers are in the vehicle, the system will arm with all doors closed and locked with the ignition key in the OFF posi- tion.


Vehicle security system activation The vehicle security system will give the following alarm: c The headlights blink and the horn sounds


intermittently.


c The alarm automatically turns off after ap- proximately 50 seconds. However, the alarm reactivates if the vehicle is tampered with again. The alarm can be shut off by unlocking the driver(cid:146)s door with the key, or by pressing the


button on the keyfob.


The alarm is activated by: c opening a door without using the key or keyfob (even if the door is unlocked by using the inside lock knob or the power door lock switch).


How to stop an activated alarm The alarm stops only by unlocking the driver(cid:146)s door with the key, or by pressing the but- ton on the keyfob.


Instruments and controls 2-15


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Statement related to Section 15 of FCC Rules for NISSAN Vehicle Immobilizer Sys- tem (CONT ASSY (cid:151) IMMOBILIZER, ANT ASSY (cid:151) IMMOBILIZER) This device complies with part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the follow- ing two conditions; (1) This device may not cause harmful in- terference, and (2) this device must accept any interference received, including inter- ference that may cause undesired opera- tion of the device. CHANGES OR MODIFICATIONS NOT EX- PRESSLY APPROVED BY THE PARTY RE- SPONSIBLE FOR COMPLIANCE COULD VOID THE USER(cid:146)S AUTHORITY TO OPER- ATE THE EQUIPMENT.


NISSAN VEHICLE IMMOBILIZER SYSTEM The NISSAN Vehicle Immobilizer System will not allow the engine to start without the use of a registered key. If the engine fails to start using a registered key (for example, when interference is caused by another registered key, an automated toll road device or automatic payment device on the key ring), restart the engine using the following pro- cedures: 1. Leave the ignition switch in the ON position


for approximately 5 seconds.


2. Turn the ignition switch to the OFF or LOCK position, and wait approximately 10 sec- onds.


3. Repeat steps 1 and 2. 4. Restart the engine while holding the device (which may have caused the interference) separate from the registered key.


If the no start condition re-occurs, NISSAN rec- ommends placing the registered key on a sepa- rate key ring to avoid interference from other devices.


2-16 Instruments and controls


LIC0474


Security indicator light The security indicator light blinks whenever the ignition switch is in the LOCK, OFF or ACC position. This function indicates the NISSAN Ve- hicle Immobilizer System is operational. If the NISSAN Vehicle Immobilizer System is mal- functioning, the light will remain on while the ignition key is in the ON position. If the light still remains on and/or the en- gine will not start, see a NISSAN dealer for NISSAN Vehicle Immobilizer System ser- vice as soon as possible. Please bring all registered keys that you have when visiting your NISSAN dealer for service.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WINDSHIELD WIPER AND WASHER SWITCH


WIC0843


SWITCH OPERATION The windshield wiper and washer operates when the ignition switch is in the ON position.


Push the lever down to operate the wiper at the following speed: s1


Intermittent (INT) (cid:151) intermittent operation can be adjusted by turning the knob toward sA (Slower) or sB (Faster). Also, the inter- mittent operation speed varies in accor- dance with the vehicle speed. (For example, when the vehicle speed is high, the intermit- tent operation speed will be faster.)


NOTE: You can turn on or turn off the driving speed dependent intermittent wiper func- tion for vehicles with color display screen. Refer to (cid:147)Vehicle electronic systems(cid:148) in the (cid:147)Display screen, heater, air conditioner, au- dio and phone systems(cid:148) section later in this manual. s2
Low (LO) (cid:151) continuous low speed operation s3 High (HI) (cid:151) continuous high speed opera-


tion


Push the lever up s4 to have one sweep opera- tion (MIST) of the wiper. Pull the lever toward you s5
to operate the washer. The wiper will also operate several times.


WARNING


In freezing temperatures the washer solu- tion may freeze on the windshield and obscure your vision which may lead to an accident. Warm the windshield with the defroster before you wash the windshield.


CAUTION


c Do not operate the washer continu-


ously for more than 30 seconds.


c Do not operate the washer if the reser-


voir tank is empty.


c Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reser- voir tank.


c Pre-mix washer fluid concentrates with water to the manufacturer(cid:146)s recom- mended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concen- trate and water.


Instruments and controls 2-17


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


REAR WINDOW WIPER AND WASHER SWITCH


REAR WINDOW AND OUTSIDE MIRROR (if so equipped) DEFROSTER SWITCH


WIC0844
The rear window wiper and washer operate when the ignition switch is in the ON position.


Turn the switch clockwise from the OFF position to operate the wiper. s1


Intermittent (INT) (cid:150) intermittent operation (not adjustable)


s2 ON (cid:150) continuous low speed operation Push the switch forward s3
to operate the washer. The wiper will also operate several times.


2-18 Instruments and controls


WARNING


In freezing temperatures the washer solu- tion may freeze on the window and ob- scure your vision. Warm the rear window with the defroster before you wash the rear window.


CAUTION


c Do not operate the washer continu-


ously for more than 30 seconds.


c Do not operate the washer if the reser-


voir tank is empty.


c Do not fill the window washer reservoir tank with washer fluid concentrates at full strength. Some methyl alcohol based washer fluid concentrates may permanently stain the grille if spilled while filling the window washer reser- voir tank.


c Pre-mix washer fluid concentrates with water to the manufacturer(cid:146)s recom- mended levels before pouring the fluid into the window washer reservoir tank. Do not use the window washer reservoir tank to mix the washer fluid concen- trate and water.


Type A


WIC0934


To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster indicator light comes on. Push the switch again to turn the defroster off. The rear window defroster automatically turns off after approximately 15 minutes.


CAUTION


When cleaning the inner side of the rear window, be careful not to scratch or dam- age the rear window defroster.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


HEADLIGHT AND TURN SIGNAL SWITCH


WIC0935


LIC0560


LIC0687


Type B


Type A


HEADLIGHT CONTROL SWITCH Lighting s1 When turning the switch to the


posi- tion, the front parking, tail, license plate and instrument panel lights come on. s2 When turning the switch to the


posi- tion, the headlights come on and all the other lights remain on.


Type B


CAUTION


Use the headlights with the engine run- ning to avoid discharging the vehicle battery.


Instruments and controls 2-19


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


NOTE: Autolight activation sensitivity and the time delay for autolight shutoff is adjust- able for vehicles with color display screen. See (cid:147)Vehicle electronic systems(cid:148) in the (cid:147)Display screen, heater, air conditioner, au- dio and phone systems(cid:148) section later in this manual. To turn on the autolight system: 1. Turn the headlight switch to the AUTO posi-


tion s1 .


2. Turn the ignition key to ON. 3. The autolight system automatically turns the


headlights on and off.


Initially, if the ignition switch is turned OFF and a door is opened and left open, the headlights remain on for 5 minutes. During that 5 minutes: c if all doors are closed, the headlights remain


on for 45 seconds, then turn off.


c if another door is opened, then the 5 minute


timer is reset.


To turn the autolight system off, turn the switch to the OFF,


position.


, or


Type C


LIC0688


LIC0561


Autolight system (if so equipped) The autolight system allows the headlights to be set so they turn on and off automatically. The autolight system can: c Turn on the headlights, front parking, tail, license plate and instrument panel lights au- tomatically when it is dark.


c Turn off all the lights when it is light. c Keep all the lights on for 45 seconds after you turn the key to OFF and all doors are closed.


2-20 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


After the headlights automatically turn off with the position, headlight switch in the the headlights will illuminate again for 5 minutes if the headlight switch is moved to the OFF position and then turned to the position.


or


or


LIC0954
Be sure you do not put anything on top of the autolight sensor s1 located on top of the instrument panel. The autolight sensor controls the autolight; if it is covered, the autolight sensor reacts as if it is dark out and the headlights will illuminate. If this occurs while parked with the engine off and the key in the ON position, your vehi- cle(cid:146)s battery could become discharged.


LIC0390


Headlight beam select s1 To select the high beam function, push the lever forward. The high beam lights come on and the


light illuminates.


s2 Pull the lever back to select the low beam. s3 Pulling and releasing the lever flashes the


headlight high beams on and off.


Battery saver system If the ignition switch is turned OFF while the headlight switch is in the posi- tion, the headlights will turn off after 5 minutes.


or


CAUTION


Even though the battery saver feature au- tomatically turns off the headlights after a period of time, you should turn the head- light switch to the OFF position when the engine is not running to avoid discharging the vehicle battery.


DAYTIME RUNNING LIGHT SYSTEM (Canada only) The headlights automatically illuminate at a re- duced intensity when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the position. Turn the OFF position or in the headlight switch to the position for full illumination when driving at night. If the parking brake is applied before the engine is started, the daytime running lights do not illumi- nate. The daytime running lights illuminate when the parking brake is released. The daytime run- ning lights will remain on until the ignition switch is turned off.


Instruments and controls 2-21


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WARNING


When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.


The instrument brightness control will not adjust the brightness when the headlights or parking lights are off.


LIC0936


switch


control


headlight


INSTRUMENT BRIGHTNESS CONTROL The instrument brightness control operates when the in the or AUTO position (with auto- lights activated). Turn the control s1 to adjust the brightness of the instrument panel lights when driving at night. The brightness indicator s2 will illuminate in the odometer when the control is turned. The indica- tor will turn off a few seconds after the control is released.


is


2-22 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


The headlights must be on and the low beams selected for the fog lights to operate. The fog lights automatically turn off when the high beam headlights are selected.


LIC0563


TURN SIGNAL SWITCH Turn signal s1 Move the lever up or down to signal the turning direction. When the turn is com- pleted, the turn signals cancel automatically.


Lane change signal s2 To signal a lane change, move the lever up or down to the point where the indicator light begins to flash, but the lever does not latch.


LIC0393
FOG LIGHT SWITCH (if so equipped) To turn the fog lights on, turn the headlight switch to the position, then turn the fog light switch to the To turn the fog lights on with the headlight switch in the AUTO position (if so equipped), the head- lights must be on, then turn the fog light switch to the To turn the fog lights off, turn the fog light switch to the OFF position.


position.


position.


Instruments and controls 2-23


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


HAZARD WARNING FLASHER SWITCH


c Turn signals do not work when the haz-


ard warning flasher lights are on.


The flashers will operate with the ignition switch in any position. Some state laws may prohibit the use of the hazard warning flasher switch while driving.


AIC0102


LIC0394


CORNERING LIGHT The cornering light provides additional illumina- tion toward the turning direction. The cornering light will illuminate on the turning direction side when a turn is signaled with the headlights on.


Push the switch on to warn other drivers when you must stop or park under emergency condi- tions. All turn signal lights flash.


WARNING


c If stopping for an emergency, be sure to


move the vehicle well off the road.


c Do not use the hazard warning flashers while moving on the highway unless unusual circumstances force you to drive so slowly that your vehicle might become a hazard to other traffic.


2-24 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


HORN


HEATED SEAT (if so equipped)


LIC0395


WIC0905


To sound the horn, push the center pad area of the steering wheel.


WARNING


Do not disassemble the horn. Doing so could affect proper operation of the supplemental front air bag system. Tam- pering with the supplemental front air bag system may result in serious personal injury.


The front seats are warmed by built-in heaters (if so equipped). The switches are located at the sides of the seats.


1. Start the engine.


2. Push the


(low) or


(high) posi- tion of the switch, as desired, depending on the temperature. The indicator light in the switch will illuminate.


The heater is controlled by a thermostat, automatically turning the heater on and off. The indicator light will remain on as long as the switch is on.


3. When the seat is warmed or before you leave


the vehicle, be sure to turn the switch off.


CAUTION


c Do not use the seat heater for extended periods or when no one is using the seat.


c Do not put anything on the seat which insulates heat, such as a blanket, cush- ion, seat cover, etc. Otherwise, the seat may become overheated.


c Do not place anything hard or heavy on the seat or pierce it with a pin or similar object. This may result in damage to the heater.


c Any liquid spilled on the heated seat should be removed immediately with a dry cloth.


c When cleaning the seat, never use gasoline, benzine, thinner, or any simi- lar materials.


c If any abnormalities are found or the heated seat does not operate, turn the switch off and have the system checked by your NISSAN dealer.


c The battery could run down if the seat heater is operated while the engine is not running.


Instruments and controls 2-25


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


TRACTION CONTROL SYSTEM (TCS) OFF SWITCH (if so equipped)


VEHICLE DYNAMIC CONTROL (VDC) OFF SWITCH (if so equipped)


REAR SONAR SYSTEM OFF SWITCH (if so equipped)


LIC0451
The vehicle should be driven with the Traction Con- trol System (TCS) on for most driving conditions.


If the vehicle is stuck in mud or snow, the TCS reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the TCS off. To turn off the TCS, push the TCS OFF switch. The Push the TCS OFF switch again or restart the engine to turn ON the system. See (cid:147)Traction control system (TCS)(cid:148) in the (cid:147)Starting and driv- ing(cid:148) section. 2-26 Instruments and controls


indicator will come on.


WIC0534
The vehicle should be driven with the Vehicle Dynamic Control (VDC) system on for most driv- ing conditions. If the vehicle is stuck in mud or snow, the VDC system reduces the engine output to reduce wheel spin. The engine speed will be reduced even if the accelerator is depressed to the floor. If maximum engine power is needed to free a stuck vehicle, turn the VDC system off. To turn off the VDC system, push the VDC OFF switch. The Push the VDC OFF switch again or restart the engine to turn ON the system. See (cid:147)Vehicle dy- namic control (VDC) system(cid:148) in the (cid:147)Starting and driving(cid:148) section.


indicator will come on.


LIC0471


WARNING


The rear sonar system is a convenience but it is not a substitute for proper back- ing. Always turn and check that it is safe to do so before backing up. Always back up slowly.


The rear sonar system (if so equipped) is active when the ignition is in the ON position and the shift selector lever is in R (Reverse).


When sensors detect obstacles within 6 ft (1.8
m) of the rear bumper, a beeping tone is emitted.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


POWER OUTLET


The rear sonar system can be disabled by push- ing the OFF switch. When the system is disabled, the indicator light on the switch will illuminate. The system will automatically reset the next time the ignition switch is turned on. See (cid:147)Rear sonar system(cid:148) in the (cid:147)Starting and driving(cid:148) section.


1st row


2nd row


LIC0937


WIC0938


The power outlets are for powering electrical accessories such as cellular telephones.


The power outlets located in the 1st and 2nd rows are powered only when the ignition key is in the ACC or ON position.


The power outlet located in the cargo area is powered directly by the vehicle(cid:146)s battery. Open the cap to use a power outlet.


CAUTION


c The outlet and plug may be hot during


or immediately after use.


c This power outlet is not designed for


use with a cigarette lighter unit.


c Do not use with accessories that ex- ceed a 12 volt, 120W (10A) power draw. Do not use double adapters or more than one electrical accessory.


c Use power outlets with the engine run- ning to avoid discharging the vehicle battery.


c Avoid using power outlets when the air conditioner, headlights or rear window defroster is on.


Instruments and controls 2-27


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


STORAGE


SUNGLASSES HOLDER Pull the lid down to open the sunglasses holder.


Below CD insert slot


(if so equipped)


INSTRUMENT PANEL STORAGE


LIC0945


LIC0940


Cargo area


WIC0939


c Before inserting or disconnecting a plug, be sure the electrical accessory being used is turned OFF.


c Push the plug in as far as it will go. If good contact is not made, the plug may overheat or the internal temperature fuse may open.


c When not in use, be sure to close the cap. Do not allow water to contact the outlet.


2-28 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Below power outlets


LIC0941


LIC0942


CONSOLE BOX (if so equipped) Push the corresponding button s1 to open the small storage compartments. Slide the console box cover s2 back to access the large storage compartment. The CD/DVD tray is removable.


LIC0943
Pull up on the lever to access the front storage bin on the console box.


Instruments and controls 2-29


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


CENTER TRAY TABLE (if so equipped) To use the center tray table, raise it up until it locks into the upright position. To access the small storage compartment on the top of the tray table, raise the lid.


CAUTION


To avoid damaging it, do not apply a total load of more than 50 lbs (23 kg) to the center tray table.


2-30 Instruments and controls


LIC0894


LIC0895
To store the tray table, pull the lever located beneath the tray table up sA and gently lower the tray table to its original position.


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


LIC0944


WIC0946


LIC0520


Front door


MAP POCKETS


Sliding door


GLOVE BOX Open the glove box by pulling the handle. Use the master key when locking s1 or unlocking s2 the glove box. The valet key cannot be used to lock or unlock the glove box.


WARNING


Keep glove box lid closed while driving to help prevent injury in an accident or a sudden stop.


Instruments and controls 2-31


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


LIC0503


LIC0504


WIC0878


SEATBACK POCKETS The seatback pockets are located on the back of the driver(cid:146)s and passenger(cid:146)s seats. The pockets can be used to store maps.


GROCERY HOOKS The grocery hooks allow for standard size plastic grocery bags to hang side by side.


CARGO NET The net located on the back of the driver(cid:146)s seat can be used to hold small objects.


CAUTION


WARNING


Do not apply a total load of more than 18
lbs (8 kg) to a single grocery hook.


c Do not place sharp objects in the net. Such objects may become dangerous projectiles and cause injury when the vehicle is moving or if the vehicle is involved in a collision.


c The cargo restrained in the net must not exceed 18 lb (8 kg) or the net may not stay secured.


2-32 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


CUP HOLDERS


CAUTION


c Avoid abrupt starting and braking when the cup holder is being used to prevent spilling the drink. If the liquid is hot, it can scald you or your passenger.


c Use only soft cups in the cup holder. Hard objects can injure you in an accident.


WIC0959


LIC0512


Small storage bin Push the button to open the small storage bin. Push the lid up to close.


OVERHEAD CONSOLE


WARNING


Keep storage bins closed while driving to help prevent injury in an accident or a sudden stop. Large storage bin Push the button to open the storage bin. Push the lid up to close.


Instruments and controls 2-33


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


LIC0955


LIC0896


LIC0509


Front


Type A


Type B


Type B To use the cup holders, raise the center tray table. Refer to (cid:147)Center tray table(cid:148) earlier in this section.


2nd row


2-34 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


3rd row


WIC0947


LIC0521


Sliding door bottle holder


Soft bottle holder


CAUTION


c Do not use bottle holder for any other objects that could be thrown about in the vehicle and possibly injure people during sudden braking or an accident. c Do not use bottle holder for open liquid


containers.


WIC0893


CARGO ORGANIZER (if so equipped) To access the cargo organizer:


Instruments and controls 2-35


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


1. Move both front seats as forward as pos- sible. Refer to 9Seats9 in the 9Safety (cid:150) seats, seat belts and supplemental restraint sys- tem9 section earlier in this manual.


2. Stow the center tray table (if so equipped). Refer to (cid:147)Center tray table(cid:148) earlier in this section.


3. Lift up the floor carpeting and the removable


floor board sA .


2-36 Instruments and controls


WIC0948


LIC0514


3RD ROW ARMREST BIN Raise the lid to open the 3rd row armrest bin.


CARGO AREA STORAGE BIN To open the cargo area storage bin, turn the knob counterclockwise s1 . The lid can be removed. To close, replace the lid and turn the knob clock- wise s2 .


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WIC0831


LIC0522


WIC0949


GARMENT HOOK To store garments, pull the garment hook down to the use position.


CAUTION


Do not apply a total load of more than 55
lbs (25 kg) to the hook.


HEAD RESTRAINT STORAGE The storage bag can be used to store up to three head restraints or other items. The bag can be retained on the universal fasten- ers located on the trim in the cargo area.


CAUTION


c The cargo contained in the storage bag


must not exceed 5 lbs (2.2 kg).


c Do not apply a total load of more than 55 lbs (25 kg) to the universal fasteners.


ROOF RACK (if so equipped) Always distribute the luggage evenly on the roof rack. Do not load more than 125 lb (56 kg). Be careful that your vehicle does not exceed the Gross Vehicle Weight Rating (GVWR) or its Gross Axle Weight Rating (GAWR front and rear). The GVWR and GAWR are located on the F.M.V.S.S. label (located on the driver(cid:146)s door pillar). For more information regarding GVWR and GAWR, refer to (cid:147)Vehicle loading information(cid:148) in the (cid:147)Technical and consumer information(cid:148) sec- tion later in this manual.


Instruments and controls 2-37


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


WINDOWS


WARNING


POWER WINDOWS


Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, un- secured cargo could cause personal injury.


CAUTION


Use care when placing or removing items from the roof rack. If you cannot comfort- ably lift the items onto the roof rack from the ground, use a ladder or stool.


WARNING


c Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the window lock switch to prevent unexpected use of the power windows.


c Do not leave children unattended inside the vehicle. They could unknowingly ac- tivate switches or controls and become trapped in a window. Unattended chil- dren could become involved in serious accidents.


WIC0950


1. Window lock button 2. 3.


Power door lock switch Front passenger(cid:146)s side automatic switch Right rear power vent window switch (if so equipped) Left rear power vent window switch (if so equipped) Driver(cid:146)s side automatic switch


4.


5.


6.


2-38 Instruments and controls


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


Driver(cid:146)s side power window switch The driver(cid:146)s side control panel is equipped with switches to open or close all of the windows. The power windows operate when the ignition switch is in the ON position, or for about 45
seconds after the ignition switch is turned to the OFF position. If the driver(cid:146)s or passenger(cid:146)s door is opened during this period of about 45 sec- onds, power to the windows is canceled. To open a window, push the switch and hold it down. To close a window, pull the switch and hold it up. To stop the opening or closing function at any time, simply release the switch.


WIC0951


LIC0410


Front passenger(cid:146)s power window switch The passenger(cid:146)s window switch operates only the corresponding passenger(cid:146)s window. To open the window, push the switch and hold it down s1 . To close the window, pull the switch up s2 . Locking passengers(cid:146) windows When the window lock button is depressed, only the driver(cid:146)s side window can be opened or closed. Push it again to cancel the window lock function.


Automatic operation To fully open a window equipped with automatic operation, press the window switch down (only driver(cid:146)s side shown) to the second detent and release it; it need not be held. The window auto- matically opens all the way. To stop the window, lift the switch up while the window is opening. To fully close a window equipped with automatic operation, pull the switch up to the second detent and release it; it need not be held.


Instruments and controls 2-39


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


The power vent windows operate when the igni- tion key is in the ON position, or for 45 seconds after the ignition key is turned to the OFF position. If the driver(cid:146)s or passenger(cid:146)s door is opened during this 45 second period, power to the vent windows is cancelled.


Auto-reverse function The auto-reverse function can be activated when a window is closed by automatic operation. Depending on the environment or driving conditions, the auto-reverse function may be activated if an impact or load similar to something being caught in the window oc- curs.


WARNING


There are some small distances immedi- ately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., inside the vehicle before closing the window.


If the control unit detects something caught in a window equipped with automatic operation as it is closing, the window will be immediately low- ered.


2-40 Instruments and controls


LIC0523


POWER VENT WINDOWS (if so equipped) Use the vent window switches on the driver(cid:146)s side window controls to open and close the power vent windows. To open a power vent window, press the switch down s1 . To close the window, lift the switch up s2 .


Z REVIEW COPY—2007 Quest (van) Owners Manual—USA_English (nna) 02/27/06—debbie X


SKYVIEW(cid:153) GLASS-PANELED ROOF (if so equipped)


SUNROOF (if so equipped)


LIC0524


Loading...
x