VQ35DE Removal 1. Disconnect the negative battery terminal. 2. Remove radiator, refer CO-30, "Removal and Installation" . 3. Remove front/right-side engine undercover. 4. Remove the drive belt, refer to EM-15, "Removal and Installation" . 5. Remove idler pulley. 6. Remove the generator adjustable top mount, using power tools. 7. Remove the generator lower mount bolt and nuts, using power tools. 8. Remove the generator lower front bracket bolt, using power tools. 9. Disconnect the generator harness connectors. 10. Slide the generator out and remove.
LKWA0052E
SC
Revision: March 2005
SC-29
2005 Altima
CHARGING SYSTEM
Installation Installation is in the reverse order of removal.
LKWA0070E
Revision: March 2005
SC-30
2005 Altima
SERVICE DATA AND SPECIFICATIONS (SDS)
SERVICE DATA AND SPECIFICATIONS (SDS) Battery
Type
Capacity (20 HR) minimum V-AH
Cold cranking current A (For reference value) Starter
Application
Manufacturer
Type
System voltage
No-load
Terminal voltage
Current
Revolution
Minimum diameter of commutator
Minimum length of brush
Brush spring tension
Clearance between pinion front edge and pinion stopper Generator
Application
Type
Nominal rating
Ground polarity
Minimum revolution under no-load (When 13.5 volts is applied)
Hot output current (When 13.5 volts is applied)
Regulated output voltage
Minimum length of brush
Brush spring pressure
Slip ring minimum outer diameter
Rotor (Field coil) resistance
GR.24F (BCI)
12-63
550 @ -18°C (0°F)
PFP:00030
EKS008LA
EKS008LB
QR25DE
VQ35DE
M/T model
Mitsubishi
A/T model
Mitsubishi
M/T model
Mitsubishi
A/T model
Mitsubishi
M001T87181ZC
M001T68781ZC
M000T87281ZC
M000T87181ZC
Reduction gear type
2,750 rpm Min.
5.5mm
15.0-20.4 N (1.53-2.08 kg, 3.37-4.59 lb)
12V
11V
90A Max.
28.8 mm
2,800 rpm Min.
7.0 mm
18.3-24.8 N (1.87-2.53 kg, 4.11-5.58 lb)
0.5-2.0 mm
QR25DE
LR1110-721
VQ35DE
LR1110-726
EKS008LC
HITACHI
12V-110A
Negative
1100 rpm
More than 35A/1,300 rpm More than 91A/2,500 rpm More than 110A/5,000 rpm
14.1 - 14.7V
6 mm (0.236 in)
1.000 - 3.432 N (0.102 - 0.350 kg, 0.225 - 0.772 lbs)
26.0 mm (1.024 in)
2.31 ohms
SC
Revision: March 2005
SC-31
2005 Altima
SERVICE DATA AND SPECIFICATIONS (SDS)
Revision: March 2005
SC-32
2005 Altima