Download PDF Manual

35


12/08/09 16:03:56 31SJC670_043


Protecting Children General Guidelines



U.S.Models


SUN VISORS


DASHBOARD


To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.


CanadianModels


SUN VISORS


36


12/08/09 16:04:04 31SJC670_044


Protecting Children General Guidelines



If You Must Drive with Several Children Your vehicle has a back seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front:


If a Child Requires Close Attention Many parents say they prefer to put an infant or a small child in the front passenger seat so they can watch the child, or because the child requires attention.


If a child requires close physical attention or frequent visual contact, we strongly recommend that another adult ride with the child in the back seat. The back seat is far safer for a child than the front.


Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page


51


).


Move the vehicle seat as far to the rear as possible (see page


119


).


Have the child sit upright and well back in the seat (see page


17


).


Placing a child in the front seat exposes the child to hazards in a frontal collision, and paying close attention to a child distracts the driver from the important tasks of driving, placing both of you at risk.


Make sure the seat belt is properly positioned and secured (see page 16


).


37


12/08/09 16:04:12 31SJC670_045


Protecting Children General Guidelines



Additional Safety Precautions


Neverholdaninfantorchildon If you are not wearing a yourlap. seat belt in a crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed.


Neverputaseatbeltoveryourself andachild. belt could press deep into the child and cause serious or fatal injuries.


During a crash, the


Neverlettwochildrenusethe If they do, they sameseatbelt. could be very seriously injured in a crash.


Makesureanyunusedseatbelt thatachildcanreachisbuckled, thelockableretractorisactivated, andthebeltisfullyretractedand locked.


If a child wraps a loose


38


seat belt around their neck, they can be seriously or fatally injured. (See pages activate and deactivate the lockable retractor.)


for how to


and


46


47


Usethechildproofdoorlocksto preventchildrenfromopeningthe reardoors. children from accidentally falling out (see page


This can prevent


104


).


Donotleavechildrenaloneina Leaving children without vehicle. adult supervision is illegal in most states, Canadian provinces and territories, and can be very hazardous.


For example, infants and small children left in a vehicle on a hot day can die from heatstroke. A child left alone with the key in the ignition switch can accidentally set the vehicle in motion, possibly injuring themselves or others.


LockalldoorsandtheIn-Bed Trunkwhenyourvehicleisnotin Children who play in vehicles use. can accidentally get trapped inside. Teach your children not to play in or around vehicles. Know how to operate the emergency In-Bed Trunk opener and decide if your children should be shown how to use this feature (see page ).


117


Teachyourchildrennottoplayon thepickupbed. closing the tailgate could cause accidental injuries.


Opening or


Even very young


Keepvehiclekeys/remote transmittersoutofthereachof children. children learn how to unlock vehicle doors, turn on the ignition switch, and open the windows, which can lead to accidental injury or death.


12/08/09 16:04:21 31SJC670_046


Protecting Infants


ChildSeatType An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is at least one year old.


Only a rear-facing child seat provides proper support for a baby’s head, neck, and back.


Protecting Infants and Small Children


Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rear- facing, reclining mode.


Donotputarear-facingchildseatin If placed aforward-facingposition. facing forward, an infant could be very seriously injured during a frontal collision.


Rear-facingChildSeatPlacement A rear-facing child seat can be placed in any seating position in the back seat, but not in the front. rear-facingchildseatinthefront seat.


Neverputa


If the passenger’s front airbag inflates, it can hit the back of the child seat with enough force to kill or seriously injure an infant.


When properly installed, a rear- facing child seat may prevent the driver or a front passenger from moving their seat as far back as recommended, or from locking their seat-back in the desired position.


It could also interfere with proper operation of the passenger’s advanced front airbag system.


CONTINUED


39


12/08/09 16:04:30 31SJC670_047


Protecting Infants and Small Children


In any of these situations, we strongly recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.


Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash.


Always place a rear-facing child seat in the back seat, not the front.


40


Protecting Small Children


ChildSeatType Many states, Canadian provinces and territories allow a child one year of age or older who also meets the minimum size and weight requirements to transition from a rear-facing child seat to a forward facing seat. Know the requirements where you are driving and follow the child seat instructions. Many experts recommend use of a rear-facing seat up to age two, if the child’s height


and weight are appropriate for a rear-facing seat.


Of the different seats available, we recommend those that have a five- point harness system as shown.


We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat.


ChildSeatPlacement We strongly recommend placing a forward-facing child seat in a back seat, not the front.


If the vehicle seat is too


Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sairbagcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating airbag can strike the child with enough force to cause very serious or fatal injuries.


12/08/09 16:04:36 31SJC670_048


Protecting Infants and Small Children, Selecting a Child Seat


Even with advanced front airbags that automatically turn the passenger’s front airbag off (see page place for a small child.


), a back seat is the safest


31


If it is necessary to put a forward- facing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.


Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.


If you must place a forward- facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.


Selecting a Child Seat Most child seats are LATCH- compatible (Lower Anchors and Tethers for CHildren). Some have a rigid-type connector, while others have a flexible-type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturer’s use and care instructions as well as the instructions in this manual. Proper installation is key to maximizing your child’s safety.


In seating positions and vehicles not equipped with LATCH, a LATCH- compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/shoulder belt.


In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH- compatible seat once a child reaches a specified weight. Please read the child seat owner’s manual for proper installation instructions.


41


12/08/09 16:04:45 31SJC670_049


Selecting a Child Seat, Installing a Child Seat


Important considerations when selecting a child seat Make sure the child seat meets the following three requirements:


The child seat is the correct type and size for the child.


The child seat is the correct type for the seating position.


The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213.


Installing a Child Seat After selecting a proper child seat and a good place to install the seat, there are three main steps in installing the seat:


1.


Properlysecurethechildseatto All child seats must be thevehicle. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash.


2.


After installing a child


Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side-to-side to verify that it is secure.


A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ‘‘rock solid.’’ Some side-to-side


42


movement can be expected and should not reduce the child seat’s effectiveness.


If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured.


3.


Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be seriously injured in a crash.


The following pages provide guidelines on how to properly install a child seat. A forward-facing child seat is used in all examples, but the instructions are the same for rear- facing child seats.


12/08/09 16:04:55 31SJC670_050


Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the rear seats.


The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH.


The location of each lower anchor is indicated by a small button above the anchor point.


Whenever using the center tether anchor point, make sure to push down the head restraint to the lowest position, route the strap over the seat-back, then around the upper guide before attaching the tether strap hook to the center tether anchor (see page


49


).


Installing a Child Seat


BUTTON


UPPER GUIDE


LATCH ANCHOR POINTS


To install a LATCH-compatible child seat:


3.


1.


2.


If needed, move the seat belt buckle or tongue away from the lower anchors.


Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors.


CENTER TETHER ANCHOR


Onthecenterseatingposition When using the tether strap on the child seat, attach the tether strap hook to the center tether anchor before installing the child seat to the lower anchors for the LATCH system, because the center tether anchor is positioned behind the child seat.


CONTINUED


43


12/08/09 16:05:00 31SJC670_051


Installing a Child Seat


Make sure the head restraint is in the lowest position. Lift the cover, then route the tether strap around the upper guide. Route the tether strap downward properly, making sure the strap is not twisted, then attach the strap hook to the center tether anchor.


44


Rigid type


Flexible type


4.


Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker’s instructions.


Some LATCH-compatible seats have a rigid-type connector as shown above.


Other LATCH-compatible seats have a flexible-type connector as shown above.


5.


Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit.


12/08/09 16:05:07 31SJC670_052


UPPER GUIDE


UPPER GUIDE


Installing a Child Seat


Outer Position


TETHER ANCHOR


Center Position


TETHER ANCHOR


7.


Tighten the strap according to the seat maker’s instructions.


8.


Push and pull the child seat forward and from side-to-side to verify that it is secure.


6.


Ontheouterseatingposition Lift the head restraint (see page ), then route the tether strap 123
over the seat-back and through the head restraint legs. Lift the cover, then route the tether strap around the upper guide. Route the tether strap downward properly, making sure the strap is not twisted, then attach the strap hook to the tether anchor on the outside of the seat bottom (see page


48


).


45


12/08/09 16:05:15 31SJC670_053


Installing a Child Seat


Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt.


In addition, the lap/shoulder belts in all seating positions except the driver’s have a lockable retractor that must be activated to secure a child seat.


If you intend to install the child seat in the rear center seating position and use the tether strap for additional security, make sure to push down the head restraint to the lowest position and hook the tether strap hook to the anchor before securing the child seat with the lap/ shoulder belt. Refer to page how to route the tether strap properly.


for


48


1.


With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle and remove any slack from the lap portion of the belt.


2.


3.


To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.


After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps.


46


12/08/09 16:05:21 31SJC670_054


Installing a Child Seat


To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.


47


4.


After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.


To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.


5.


Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.


12/08/09 16:05:29 31SJC670_055


Installing a Child Seat


Installing a Child Seat with a Tether


COVER


CENTER TETHER ANCHOR


UPPER GUIDE


OUTER TETHER ANCHOR


A child seat with a tether can be installed in any seating position in the back seat. Each outer seating position has a tether anchor at the outside of the seat bottom. The center seating position has a tether anchor between the lower anchors for the LATCH- compatible child seat. Each anchor point is shown above.


48


UsinganOuterTetherAnchor


UPPER GUIDE


When using a tether anchor, always hook the tether strap through the upper guide to route it properly.


Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.


OUTER TETHER ANCHOR


1.


After properly securing the child seat (see page ), lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs.


46


2.


Lift the cover, then hook the tether strap through the upper guide as shown.


12/08/09 16:05:38 31SJC670_056


3.


4.


Route the tether strap downward properly, making sure the strap is not twisted.


Attach the tether strap hook to the outer tether anchor on the outside of the seat bottom.


5.


Tighten the strap according to the seat maker’s instructions.


UsingtheCenterTetherAnchor Make sure to attach the tether strap hook to the anchor before installing the child seat, because the tether anchor is positioned behind the child seat.


1.


Place the child seat on the rear seat.


2.


Push down the rear center head restraint to the lowest position.


Installing a Child Seat


UPPER GUIDE


CENTER TETHER ANCHOR


3.


4.


Route the tether strap over the seat-back, lift the cover, then hook the tether strap through the upper guide as shown.


Route the tether strap downward properly along the seat-back, making sure the strap is not twisted.


CONTINUED


49


12/08/09 16:05:43 31SJC670_057


Installing a Child Seat


UPPER GUIDE


6.


46


Properly secure the child seat (see page strap according to the seat maker’s instructions.


), then tighten the tether


Whenever using the tether strap, make sure to route the strap through the upper guide before attaching the tether strap hook to the tether anchor. If the tether strap is not routed properly and secured, the child seat may not be secured. This could lead to serious injury or death.


CENTER TETHER ANCHOR


5.


Attach the tether strap hook to the center tether anchor between the lower anchors for the LATCH- compatible child seat.


50


12/08/09 16:05:50 31SJC670_058


When a child reaches the recommended weight or height limit for a forward-facing child seat, the child should sit in a back seat on a booster seat and wear the lap/ shoulder belt.


The following pages give instructions on how to check proper seat belt fit, what kind of booster seat to use if one is needed, and important precautions for a child who must sit in front.


Allowing a child age 12 or under to sit in front can result in injury or death if the passenger’s front airbag inflates.


If a child must ride in front, move the vehicle seat as far back as possible, use a booster seat if needed, have the child sit up properly and wear the seat belt properly.


Protecting Larger Children


Checking Seat Belt Fit


To determine if a lap/shoulder belt properly fits a child, have the child put on the seat belt, then ask yourself:


1.


Does the child sit all the way back against the seat?


2.


Do the child’s knees bend comfortably over the edge of the seat?


CONTINUED


51


12/08/09 16:05:59 31SJC670_059


Protecting Larger Children


3.


Does the shoulder belt cross between the child’s neck and arm?


4.


Is the lap part of the belt as low as possible, touching the child’s thighs?


5.


Will the child be able to stay seated like this for the whole trip?


If you answer yes to all these questions, the child is ready to wear the lap/shoulder belt correctly. If you answer no to any question, the child needs to ride on a booster seat.


52


Using a Booster Seat


territories where you intend to drive.


Booster seats can be high-back or low-back. Whichever style you select, make sure the booster seat meets federal safety standards (see page 42
seat maker’s instructions.


) and that you follow the booster


If a child who uses a booster seat must ride in front, move the vehicle seat as far back as possible and be sure the child is wearing the seat belt properly.


A child may continue using a booster seat until the tops of their ears are even with the top of the vehicle’s or booster’s seat-back. A child of this height should be tall enough to use the lap/shoulder belt without a booster seat.


A child who has outgrown a forward- facing child seat should ride in a back seat and use a booster seat until the lap/shoulder belt fits them properly without the booster.


Some states, Canadian provinces and territories also require children to use a booster seat until they reach a given age or weight (e.g., 6 years or 60 lbs). Be sure to check current laws in the states, provinces and


12/08/09 16:06:09 31SJC670_060


When Can a Larger Child Sit in Front The National Highway Traffic Safety Administration and Transport Canada recommend that all children age 12 and under be properly restrained in the back seat.


If the passenger’s front airbag inflates in a moderate to severe frontal collision, the airbag can cause serious injuries to a child who is unrestrained, improperly restrained, sitting too close to the airbag, or out of position.


A side airbag also poses risks. If any part of a larger child’s body is in the path of a deploying side airbag, the child could receive possibly serious injuries.


Of course, children vary widely. And while age may be one indicator of when a child can safely ride in front, there are other important factors you should consider.


PhysicalSize Physically, a child must be large enough for the lap/shoulder belt to properly fit (see pages ). If 51
the seat belt does not fit properly, with or without the child sitting on a booster seat, the child should not sit in front.


and


16


Maturity To safely ride in front, a child must be able to follow the rules, including sitting properly, and wearing the seat belt properly throughout a ride.


Protecting Larger Children


If you decide that a child can safely ride up front, be sure to:


Carefully read the owner’s manual, and make sure you understand all seat belt instructions and all safety information.


Move the vehicle seat to the rear- most position.


Have the child sit up straight, back against the seat, and feet on or near the floor.


Check that the child’s seat belt is properly and securely positioned.


Supervise the child. Even a mature child sometimes needs to be reminded to fasten the seat belt or sit properly.


53


Devices intended to


Donotputanyaccessoriesona seatbelt. improve a child’s comfort or reposition the shoulder part of a seat belt can make the belt less effective and increase the chance of serious injury in a crash.


12/08/09 16:06:15 31SJC670_061


Protecting Larger Children


Additional Safety Precautions


Donotletachildwearaseatbelt This could result acrosstheneck. in serious neck injuries during a crash.


This could


Donotletachildputtheshoulder partofaseatbeltbehindtheback orunderthearm. cause very serious injuries during a crash. It also increases the chance that the child will slide under the belt in a crash and be injured.


Twochildrenshouldneverusethe sameseatbelt. could be very seriously injured in a crash.


If they do, they


54


12/08/09 16:06:21 31SJC670_062


Your vehicle’s exhaust contains carbon monoxide gas. Carbon monoxide should not enter the vehicle in normal driving if you maintain your vehicle properly and follow the information on this page.


Have the exhaust system inspected for leaks whenever:


The vehicle is raised for an oil change.


You notice a change in the sound of the exhaust.


The vehicle was in a collision that may have damaged the underside.


Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you.


Avoid any enclosed areas or activities that expose you to carbon monoxide.


High levels of carbon monoxide can collect rapidly in enclosed areas, such as a garage. Do not run the engine with the garage door closed. Even with the door open, run the engine only long enough to move the vehicle out of the garage.


Carbon Monoxide Hazard


With a truck cap installed and the back window open, engine exhaust may enter the vehicle and cause a hazardous condition. Keep the back window tightly closed whenever you drive with a truck cap installed.


If you must sit in your parked vehicle with the engine running, even in an unconfined area, adjust the heating and cooling system/climate control system as follows:


1. 2. 3. 4.


Select the fresh air mode. Select the Turn the fan on high speed. Set the temperature control to a comfortable setting.


mode.


55


12/08/09 16:06:35 31SJC670_063


Safety Labels


These labels are in the locations shown. They warn you of potential hazards that could cause serious injury or death. Read these labels carefully.


If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact your dealer for a replacement.


RADIATOR CAP


56


DASHBOARD U.S.modelsonly


SUN VISORS U.S.models


Canadianmodels


SUN VISOR U.S.modelsonly


12/08/09 16:06:52 31SJC670_064


DOORJAMBS U.S.models


Canadianmodels


PICKUP BED U.S.models


Canadianmodels


Safety Labels


57


12/08/09 16:06:54 31SJC670_065


58


12/08/09 16:06:58 31SJC670_066


This section gives information about the controls and displays that contribute to the daily operation of your vehicle. All the essential controls are within easy reach.


Control Locations Instrument Panel Instrument Panel Indicators Gauges Multi-Information Display Controls Near the Steering


........................... ............................ .......... ............................................. ..............


. 60
. 61
. 62
. 76
.82


Wheel


Headlight Control Dial


Multi-Control Lever Headlights


........................................... ........................ ........................................ ............... ........................................ ........ ................. .......... ................................................ ...................... .............................. .................................... ............


Fog Lights Instrument Panel Brightness Hazard Warning Button Steering Wheel Adjustment Keys Immobilizer System Ignition Switch Door Locks


Childproof Door Locks Auto Door Locking/


. 93
. 94
. 95
. 95
. 97
. 98
. 99
. 99
. 100
. 101
. 102
. 103
. 104


Unlocking


.............................. ..................... ..................... ............................... ............................................... ..................................


Remote Transmitter Dual-Action Tailgate In-Bed Trunk Seats Seat Heaters


. 104
. 110
. 113
. 116
. 119
. 126


Instruments and Controls


Center Console


Console Compartments Cargo Hooks


Power Windows Moonroof Parking Brake Mirrors Interior Convenience Items


............................ ....................................... ............................... ........................................... ......... ......................... ....... ......................... ..................... .................................. ................................ .................... ........ ................................... ............................ ........................ ............................... .....................................


Beverage Holders Glove Box Coat Hooks Sunglasses Holder Accessory Power Sockets Sun Visor Vanity Mirror AC Power Outlet


Interior Lights Bed Lights


. 128
. 131
. 132
. 133
. 135
. 136
. 136
. 137
. 137
. 138
. 138
. 138
. 139
. 140
. 140
.141
. 142
. 144


59


12/09/07 16:42:53 31SJC670_067


Control Locations


INSTRUMENT PANEL INDICATORS GAUGES (P.76)


(P.62)


PARKING BRAKE RELEASE HANDLE (P.132)


MIRROR CONTROLS (P.134)


POWER DOOR LOCK MASTER SWITCH (P.103)


POWER WINDOW SWITCHES (P.128)


HOOD RELEASE HANDLE (P.250)


FUEL FILL DOOR RELEASE HANDLE (P.246)


Vehicle with navigation system is shown.


: If equipped


* 60


REARVIEW MIRROR WITH REARVIEW CAMERA DISPLAY (P.240)



AUDIO SYSTEM (P.159)


AUXILIARY INPUT JACK * (P.205)


HEATING/COOLING CONTROLS CLIMATE CONTROL SYSTEM


(P.146)


(P.152)


GLOVE BOX (P.138)


PARKING BRAKE PEDAL (P.132)


CENTER CONSOLE (P.136)


ACCESSORY POWER SOCKETS (P.139)


12/08/09 16:07:15 31SJC670_068


(P.69)


(P.73)


(P.75)


(P.70)


(P.72)


LIGHTS ON INDICATOR TIRE PRESSURE MONITORING SYSTEM (TPMS) INDICATOR * LOW TIRE PRESSURE INDICATOR/ TPMS INDICATOR VEHICLE STABILITY ASSIST (VSA) SYSTEM INDICATOR (P.70) VTM-4 INDICATOR BACK WINDOW OPEN INDICATOR PARKING BRAKE AND BRAKE SYSTEM INDICATOR CHARGING SYSTEM INDICATOR LOW OIL PRESSURE INDICATOR MALFUNCTION INDICATOR LAMP BED LIGHTS ON INDICATOR (P.74) A/T TEMPERATURE INDICATOR (P.75) IN-BED TRUNK OPEN INDICATOR DOOR AND TAILGATE OPEN INDICATOR


(P.63)


(P.65)


(P.63)


(P.63)


(P.69)


Instrument Panel


MESSAGE INDICATOR *


(P.74)


SECURITY SYSTEM INDICATOR (P.68)



SIDE AIRBAG OFF INDICATOR


(P.64)


MAINTENANCE MINDER INDICATOR


(P.71)


HIGH BEAM INDICATOR (P.67)


CRUISE MAIN INDICATOR (P.67)


IMMOBILIZER SYSTEM INDICATOR (P.66)


SUPPLEMENTAL RESTRAINT SYSTEM (SRS) INDICATOR (P.64) SEAT BELT REMINDER INDICATOR


(P.62)


LOW FUEL INDICATOR (P.68) WASHER LEVEL INDICATOR (P.67) DAYTIME RUNNING LIGHTS INDICATOR


(P.67)


ANTI-LOCK BRAKE SYSTEM (ABS) INDICATOR


(P.66)


MULTI-INFORMATION DISPLAY * INFORMATION DISPLAY *


(P.82)/


(P.77) CRUISE CONTROL (P.67) INDICATOR


(P.75)


VSA OFF INDICATOR (P.71)


The U.S. instrument panel is shown. Differences for the Canadian models are noted in the text. * * *


1 : 2 : 3 : On RTS, RTL, and Touring models.


On models with navigation system. On models without navigation system.


61


12/08/09 16:07:23 31SJC670_069


Instrument Panel Indicators


The instrument panel has many indicators to give you important information about your vehicle.


Seat Belt Reminder Indicator


This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passengers to fasten your seat belts. A beeper also sounds if you have not fastened your seat belt.


If you turn the ignition switch to the ON (II) position before fastening your seat belts, the beeper sounds, and the indicator flashes. If you do not fasten your seat belts before the beeper stops, the indicator stops flashing but remains on.


62


If your front passenger does not fasten their seat belt, the indicator comes on about 6 seconds after the ignition switch is turned to the ON (II) position.


If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page


20


Onmodelswithnavigationsystem You will also see a ‘‘FASTEN SEAT BELT’’ or ‘‘FASTEN PASSENGER SEAT BELT’’ message on the multi- ). information display (see page


90


For more information, see page


.20


12/08/09 16:07:31 31SJC670_070


Instrument Panel Indicators


Malfunction Indicator Lamp


For more information, see page


373


Onmodelswithnavigationsystem You will also see a ‘‘CHECK EMISSION SYSTEM’’ message on the multi-information display (see page page


). For more information, see


90
373


Low Oil Pressure Indicator


The engine can be severely damaged if this indicator flashes or stays on when the engine is running. For more information, see page 372


Charging System Indicator


If this indicator comes on when the engine is running, the battery is not being charged. For more information, see page


372


Onmodelswithnavigationsystem You will also see a ‘‘CHECK ENGINE OIL LEVEL’’ message on the multi-information display (see page


91


).


Onmodelswithnavigationsystem You will also see a ‘‘CHECK CHARGING SYSTEM’’ message on the multi-information display (see page


90


).


63


12/08/09 16:07:39 31SJC670_071


Instrument Panel Indicators


Supplemental Restraint System (SRS) Indicator This indicator comes on for several seconds when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates a potential problem with your front airbags. This indicator will also alert you to a potential problem with your airbag system components. For more information, see page


30


Onmodelswithnavigationsystem You will also see a ‘‘CHECK AIRBAG SYSTEM’’ message on the multi-information display (see page 90


).


64


U.S.


Canada


Side Airbag Off Indicator


This indicator comes on for several seconds when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates that the passenger’s side airbag has automatically shut off. For more information, see page 31


Onmodelswithnavigationsystem You will also see a ‘‘PASSENGER SIDE AIRBAG OFF’’ message on the multi-information display (see page 90


).


12/08/09 16:07:45 31SJC670_072


Instrument Panel Indicators


U.S.


Canada


Parking Brake and Brake System Indicator


This indicator has two functions:


1.


It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. A beeper sounds if you drive with the parking brake not fully released. Driving with the parking brake not fully released can damage the brakes and tires.


Onmodelswithnavigationsystem You will also see a ‘‘RELEASE PARKING BRAKE’’ message on the multi-information display (see page 90


).


2.


If it stays on after you have fully released the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system. For more information, see page


374


Onmodelswithnavigationsystem You will also see a ‘‘BRAKE FLUID LOW’’ or ‘‘CHECK BRAKE SYSTEM’’ message on the multi- information display (see page 90


).


65


12/08/09 16:07:53 31SJC670_073


Instrument Panel Indicators


Anti-lock Brake System (ABS) Indicator


This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it comes on at any other time, there is a problem with the ABS. If this happens, have your vehicle checked at a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. For more information, see page


287


Onmodelswithnavigationsystem You will also see a ‘‘CHECK ABS SYSTEM’’ message on the multi- 91
information display (see page


).


66


Immobilizer System Indicator


This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will go off if you have inserted a properly coded ignition key. If it is not a properly coded key, the indicator will blink and the engine will not start (see page


101


).


This indicator also blinks several times when you turn the ignition switch from the ON (II) position to the ACCESSORY (I) or LOCK (0) position.


Turn Signal and Hazard Warning Indicators


The left or right turn signal indicator blinks when you signal a lane change or turn. If an indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see pages ). and Replace the bulb as soon as possible, since other drivers cannot see that you are signaling.


337


335


When you press the hazard warning button, both turn signal indicators and all turn signals on the outside of the vehicle flash.


12/08/09 16:08:04 31SJC670_074


Daytime Running Lights Indicator


If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem with a circuit. Have your vehicle checked by your dealer.


Onmodelswithnavigationsystem If you see a ‘‘CHECK DRL SYSTEM’’ message on the multi- information display, there is a problem with the daytime running light circuit. Take your vehicle to a dealer to have it checked.


Instrument Panel Indicators


High Beam Indicator


Washer Level Indicator


This indicator comes on with the high beam headlights. For more information, see page


95


Cruise Main Indicator


This indicator comes on when you turn on the cruise control system by pressing the CRUISE button (see page


210


).


Cruise Control Indicator


This indicator comes on when you set the cruise control. See page 210
cruise control.


for information on operating the


This indicator comes on when the washer fluid level is low. Add washer fluid when you see this indicator (see page


328


).


Onmodelswithnavigationsystem You will see a ‘‘WASHER FLUID LOW’’ message on the multi- information display (see page


91


).


67


12/08/09 16:08:12 31SJC670_075


Instrument Panel Indicators


Low Fuel Indicator


LOW FUEL INDICATOR


This indicator comes on as a reminder that you must refuel soon.


When the indicator comes on, there are about 3.3 U.S. gal (12.5 ) of fuel remaining in the tank.


When the needle reaches E, there is a very small amount of fuel in the tank.


68


Onmodelswithnavigationsystem You will also see a ‘‘FUEL LOW’’ message on the multi-information display.


Security System Indicator OnRTS,RTL,andTouringmodels


SECURITY SYSTEM INDICATOR


This indicator comes on when the security system is set. See page 208
for more information on the security system.


12/08/09 16:08:18 31SJC670_076


Lights On Indicator


This indicator reminds you that the exterior lights are on. It comes on when you turn the headlight control dial to either the


or


position.


If you turn the ignition switch to the ACCESSORY (I) or LOCK (0) position without turning off the headlight control dial, this indicator remains on. A reminder chime will also sound when you open the driver’s door.


A/T Temperature Indicator


This indicator monitors the temperature of the automatic transmission fluid. It should come on

Loading...
x