They could be
Neverletpassengersrideinsidea truckcap(shell). killed or injured in a crash, or become ill or even die from carbon monoxide poisoning if engine exhaust enters the cap.
Passengersshouldnotstandupor changeseatswhilethevehicleis A passenger who is not moving. wearing a seat belt during a crash or emergency stop can be thrown against the inside of the vehicle, against other occupants, or out of the vehicle.
Twopeopleshouldneverusethe sameseatbelt. could be very seriously injured in a crash.
If they do, they
Donotputanyaccessoriesonseat Devices intended to improve belts. occupant comfort or reposition the shoulder part of a seat belt can reduce the protective capability of the seat belt and increase the chance of serious injury in a crash.
Donotplacehardorsharpobjects betweenyourselfandafront Carrying hard or sharp airbag. objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inflates.
Keepyourhandsandarmsaway If your fromtheairbagcovers. hands or arms are close to an airbag cover, they could be injured if the airbag inflates.
Protecting Adults and Teens
Donotattachorplaceobjectson Objects on thefrontairbagcovers. the covers marked ‘‘SRS AIRBAG’’ could interfere with the proper operation of the airbags or be propelled inside the vehicle and hurt someone if the airbags inflate.
Donotattachhardobjectsonor If a side airbag or a nearadoor. side curtain airbag inflates, a cup holder or other hard object attached on or near the door could be propelled inside the vehicle and hurt someone.
Donotcoverorreplacefrontseat- backcoverswithoutconsulting Improperly replacing yourdealer. or covering front seat-back covers can prevent your side airbags from inflating during a side impact.
19
12/08/09 16:01:41 31SJC670_027
Additional Information About Your Seat Belts
Seat Belt System Components Your seat belt system includes lap/ shoulder belts in all seating positions. The front seat belts are also equipped with automatic seat belt tensioners.
The seat belt system includes an indicator on the
instrument panel and a beeper to remind you and your passengers to fasten your seat belts.
This system monitors the front seat belts. If you turn the ignition switch to the ON (II) position before your seat belt is fastened, the beeper will sound and the indicator will flash. If your seat belt is not fastened before the beeper stops, the indicator will stop flashing but remain on.
20
If a front passenger does not fasten their seat belt, the indicator will come on about 6 seconds after the ignition switch is turned to the ON (II) position.
If either the driver or a front passenger does not fasten their seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals.
Onmodelswithnavigationsystem You will also see a ‘‘FASTEN SEAT BELT’’ or ‘‘FASTEN PASSENGER SEAT BELT’’ message on the multi- information display (see page
90
).
When no one is sitting in the front passenger’s seat, or an infant or small child is riding there, the indicator may not come on and the beeper may not sound.
If the indicator comes on or the beeper sounds when the driver’s seat belt is latched and there is no front seat passenger and no items on the front seat, something may be interfering with the monitoring system. Look for and remove:
Any items under the front passenger’s seat.
Any object(s) hanging on the seat or in the seat-back pocket.
Any object on the floor that is touching the rear of the seat-back.
If no obstructions are found, have your vehicle checked by a dealer.
12/08/09 16:01:48 31SJC670_028
Lap/Shoulder Belt The lap/shoulder belt goes over your shoulder, across your chest, and across your hips.
To fasten the belt, insert the latch plate into the buckle, then tug on the belt to make sure the buckle is latched (see page for how to properly position the belt).
16
To unlock the belt, press the red PRESS button on the buckle. Guide the belt across your body so that it retracts completely. After exiting the vehicle, be sure the belt is out of the way and will not get closed in the door.
Additional Information About Your Seat Belts
All seat belts have an emergency locking retractor. In normal driving, the retractor lets you move freely in your seat while it keeps some tension on the belt. During a collision or sudden stop, the retractor automatically locks the belt to help restrain your body.
The seat belts in all positions except the driver’s have a lockable retractor that must be activated to secure a child seat (see page
46
).
If the shoulder part of the belt is pulled all the way out, the lockable retractor will activate. The belt will retract, but it will not allow the passenger to move freely.
To deactivate the lockable retractor, unlatch the buckle and let the seat belt fully retract. To refasten the seat belt, pull it out only as far as needed.
Allowing a child to play with a seat belt or wrap one around their neck can result in serious injury or death.
Instruct children not to play with any seat belt and make sure any unused seat belt a child can reach is buckled, fully retracted, and locked.
21
12/08/09 16:01:57 31SJC670_029
Additional Information About Your Seat Belts
Automatic Seat Belt Tensioners
For added protection, the front seat belts are equipped with automatic seat belt tensioners. When activated, the tensioners immediately tighten the belts to help hold the driver and a front passenger in position.
The tensioners can be activated during a collision in which the front airbags . In this case, the airbags would not be needed, but the additional restraint could be helpful.
donotdeploy
22
If the tensioner is activated, the SRS indicator comes on and the tensioner must be replaced.
Seat Belt Maintenance For safety, you should check the condition of your seat belts regularly.
Pull each belt out fully, and look for
frays, cuts, burns, and wear. Check
that the latches work smoothly and
the belts retract easily. If a belt does
not retract easily, cleaning the belt
may correct the problem (see page
). Any belt that is not in good
341
condition or working properly will
not provide good protection and
should be replaced as soon as
possible.
Honda provides a limited warranty on seat belts. See your WarrantyInformation details.
booklet for
Honda
If a seat belt is worn during a crash, you should have your dealer inspect the belt, and replace it if necessary. A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash.
The dealer should also inspect the anchors for damage and replace them if needed. If the automatic seat belt tensioners activate during a crash, they must be replaced.
Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.
Check your seat belts regularly and have any problem corrected as soon as possible.
12/08/09 16:02:03 31SJC670_030
Airbag System Components
Additional Information About Your Airbags
(9)
(8)
(2)
(14)
(7)(12)
(3)
(13)
(1)
(8)
(11)
(14)
(5)
(4)
(4)
(5)
(16)
(16)
(15)
CONTINUED
23
(1) Driver’s Front Airbag (2) Passenger’s Front Airbag (3) Control Unit (4) Front Seat Belt Tensioners (5) Side Airbags (6) Driver’s Seat Position Sensor (7) Front Passenger’s Weight Sensors (8) Front Impact Sensors (9) Passenger Airbag Off Indicator (10) Side Impact Sensors (First) (11) Occupant Position Detection System (OPDS) Sensors (12) Front Passenger’s Weight Sensors Control Unit/
(6)
(10)
OPDS Sensors Control Unit
(13) SRS Indicator (14) Side Curtain Airbags (15) Roll Rate Sensor (16) Side Impact Sensors (Second)
12/08/09 16:02:13 31SJC670_031
Additional Information About Your Airbags
Your airbag system includes:
Two SRS (supplemental restraint system) front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’s airbag is stored in the dashboard. Both are marked ‘‘SRS AIRBAG’’ (see page
25
).
Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seat- backs. Both are marked ‘‘SIDE AIRBAG’’ (see page
28
).
Two side curtain airbags, one for
each side of the vehicle. The
airbags are stored in the ceiling,
above the side windows. The front
and rear pillars are marked ‘‘SIDE
CURTAIN AIRBAG’’ (see page
30
).
24
Automatic front seat belt
).
tensioners (see page
22
Sensors that can detect a moderate to severe front impact, side impact, or if your vehicle is about to rollover.
Sensors that can detect whether a child is in the passenger’s side airbag path and signal the control unit to turn the airbag off (see page
29
).
Weight sensors that monitor the weight on the front passenger’s seat. If the weight is about 65 lbs (29 kg) or less (the weight of an infant or small child), the passenger’s front airbag will be turned off (see page
27
).
A rollover sensor that can detect if your vehicle is about to roll over and signal the control unit to deploy both side curtain airbags (see page
30
).
Sensors that can detect whether the driver’s seat belt and the front passenger’s seat belt are latched or unlatched (see page
20
).
A driver’s seat position sensor that
monitors the distance of the seat
from the front airbag. If the seat is
too far forward, the airbag will
inflate with less force (see page
27
).
A sophisticated electronic system that continually monitors and records information about the sensors, the control unit, the airbag activators, the seat belt tensioners, and driver and front passenger seat belt use when the ignition switch is in the ON (II) position.
12/08/09 16:02:23 31SJC670_032
Additional Information About Your Airbags
An indicator on the instrument panel that alerts you to a possible problem with your airbag system components (see page
30
).
An indicator on the instrument panel that alerts you that the passenger’s side airbag has been turned off (see page
31
).
An indicator on the dashboard that alerts you that the passenger’s front airbag has been turned off (see page
31
).
Emergency backup power in case your vehicle’s electrical system is disconnected in a crash.
How Your Front Airbags Work
If you ever have a moderate to severe frontal collision, sensors will detect the vehicle’s rapid deceleration.
If the rate of deceleration is high enough, the control unit will inflate the driver’s and front passenger’s airbags, at the time and with the force needed.
During a frontal crash, your seat belt restrains your lower body and torso, and the front airbag helps protect your head and chest.
Although both airbags normally inflate within a split second of each other, it is possible for only one airbag to deploy.
This can happen if the severity of a collision is at the margin, or threshold, that determines whether or not the airbags will deploy. In such cases, the seat belt will provide sufficient protection, and the supplemental protection offered by the airbag would be minimal.
Only the driver’s airbag can deploy if there is no passenger in the front seat, or if the advanced airbag system has turned the passenger’s airbag off (see page
27
).
CONTINUED
25
12/08/09 16:02:28 31SJC670_033
Additional Information About Your Airbags
The total time for inflation and deflation is less than a second, so fast that most occupants are not aware that the airbags deployed until they see them lying in their laps.
After a crash, you may see what looks like smoke. This is actually powder from the airbag’s surface. Although the powder is not harmful, people with respiratory problems may experience some temporary discomfort. If this occurs, get out of the vehicle as soon as it is safe to do so.
Dual-Stage,Multiple-Threshold FrontAirbags(SRS) Your vehicle is equipped with dual- stage, multiple-threshold front airbags (SRS). During a frontal crash severe enough to cause one or both front airbags to deploy, the airbags can inflate at different rates, depending on the severity of the crash, whether or not the seat belts are latched, and/or other factors. Front airbags are designed to supplement the seat belts to help reduce the likelihood of head and chest injuries in frontal crashes.
After inflating, the front airbags immediately deflate, so they won’t interfere with the driver’s visibility, or the ability to steer or operate other controls.
26
12/08/09 16:02:37 31SJC670_034
AdvancedAirbags Your front airbags are also advanced airbags. The main purpose of this feature is to help prevent airbag- caused injuries to short drivers and children or small-statured adults who ride in front. For both advanced airbags to work properly:
Occupants must sit upright and wear their seat belts properly.
Do not spill any liquids on or under the seats, cover the sensors, or put any objects or metal items under the front seats.
Objects placed or pushed under the front passenger’s seat may cause the sensor to malfunction, increasing the risk of injury in a crash.
Failure to follow these instructions could damage the sensors or prevent them from working properly.
Additional Information About Your Airbags
DRIVER’S SEAT POSITION SENSOR
PASSENGER’S SEAT WEIGHT SENSOR
The driver’s advanced front airbag system includes a seat position sensor under the seat. If the seat is too far forward, the airbag will inflate with less force, regardless of the severity of the impact.
If there is a problem with the sensor, the SRS indicator will come on, and the airbag will inflate in the normal manner regardless of the driver’s seating position.
The passenger’s advanced front
airbag system has weight sensors
under the seat. Although Honda
does not encourage carrying an
infant or small child in front, if the
sensors detect the weight of an
infant or small child (up to about 65
lbs or 29 kg), the system will
automatically turn the passenger’s
front airbag off.
CONTINUED
27
12/08/09 16:02:46 31SJC670_035
Additional Information About Your Airbags
Be aware that objects placed on the passenger’s seat can also cause the airbag to be turned off.
A rear passenger pushing or pulling on the back of the front passenger’s seat.
How Your Side Airbags Work
When the passenger airbag gets turned off by the weight sensors, a ‘‘passenger airbag off’’ indicator in the center of the dashboard comes on (see page
31
).
If the weight sensors detect there is no passenger in the front seat, the airbag is automatically turned off. However, the passenger airbag off indicator in this situation will not come on.
To ensure that the passenger’s advanced front airbag system will work properly, donotdoanything thatwouldincreaseordecreasethe weightonthefrontpassenger’sseat. This includes:
28
Moving the front seat forcibly back against cargo on the seat or floor behind it.
Hanging heavy items on the front passenger seat, or placing heavy items in the seat-back pocket.
Back seat passengers should not wedge objects or intentionally force their feet under the front passenger seat.
Also, make sure the floor mat behind
the front passenger’s seat is hooked
to the floor mat anchor (see page
342
interfere with the proper operation
of the sensors and operation of the
seat.
). If it is not, the mat may
If you ever have a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate either the driver’s or the passenger’s side airbag.
12/08/09 16:02:53 31SJC670_036
Additional Information About Your Airbags
Only one airbag will deploy during a side impact. If the impact is on the passenger’s side, the passenger’s side airbag will deploy even if there is no passenger.
SideAirbagCutoffSystem Your vehicle has a side airbag cutoff system designed primarily to protect a child riding in the front passenger’s seat.
To get the best protection from the side airbags, front seat occupants should wear their seat belts and sit upright and well back in their seats.
Although Honda does not encourage children to ride in front, if the position sensors detect a child has leaned into the side airbag’s deployment path, the airbag will shut off.
The side airbag may also shut off if a short adult leans sideways, or a larger adult slouches and leans sideways into the airbag’s deployment path.
Objects placed on the front passenger seat can also cause the side airbag to be shut off.
31
), have the
If the side airbag off indicator comes on (see page passenger sit upright. Once the passenger is out of the airbag’s deployment path, the system will turn the airbag back on, and the indicator will go out.
There will be some delay between the moment the passenger moves into or out of the airbag deployment path and when the indicator comes on or goes off.
A front seat passenger should not use a cushion or another object as a backrest. It may prevent the cutoff system from working properly.
29
12/08/09 16:03:03 31SJC670_037
Additional Information About Your Airbags
How Your Side Curtain Airbags Work
SIDE CURTAIN AIRBAG
InaSideImpact In a moderate to severe side impact, sensors will detect rapid acceleration and signal the control unit to instantly inflate the side curtain airbag.
30
InaRollover
A rollover sensor monitors the
degree and rate your vehicle may roll
over and automatically deploy the
side curtain airbags and activate the
front seat belt tensioners (see page
22
).
In a rollover toward the front passenger’s side of the vehicle, both side curtain airbags will inflate and the front seat belt tensioners will activate even if there are no occupants on that side of the vehicle.
To get the best protection from the side curtain airbags, occupants should wear their seat belts and sit upright and well back in their seats.
How the SRS Indicator Works
The SRS indicator alerts you to a potential problem with your airbag system components.
When you turn the ignition switch to the ON (II) position, this indicator comes on for several seconds then goes off. This tells you the system is working properly.
If the indicator comes on at any other time, or does not come on at all, you should have the system checked by your dealer. For example:
If the SRS indicator does not come on after you turn the ignition switch to the ON (II) position.
If the indicator stays on after the engine starts.
If the indicator comes on or flashes on and off while you drive.
12/08/09 16:03:13 31SJC670_038
Onmodelswithnavigationsystem
You will also see a ‘‘CHECK
AIRBAG SYSTEM’’ message on the
multi-information display (see page
90
).
If you see any of these indications, the airbag system components may not work properly when you need them.
Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.
Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.
Additional Information About Your Airbags
U.S.
Canada
How the Side Airbag Off Indicator Works
This indicator alerts you that the passenger’s side airbag has been automatically shut off. It does not mean there is a problem with your side airbags.
When you turn the ignition switch to the ON (II) position, the indicator should come on for several seconds and then go off (see page ). If it doesn’t come on, stays on, or comes on while driving without a passenger in the front seat, have the system checked.
64
Onmodelswithnavigationsystem
You will also see a ‘‘PASSENGER
SIDE AIRBAG OFF’’ message on the
multi-information display (see page
90
).
How the Passenger Airbag Off Indicator Works
PASSENGER AIRBAG OFF INDICATOR
U.S.
Canada
This indicator alerts you that the passenger’s front airbag has been shut off because weight sensors detect about 65 lbs (29 kg) or less (the weight of an infant or small child) on the front passenger’s seat. It does there is a problem with the airbag.
notmean
CONTINUED
31
12/08/09 16:03:23 31SJC670_039
Additional Information About Your Airbags
Be aware that objects placed on the front seat can cause the indicator to come on.
If no weight is detected on the front seat, the airbag will be automatically shut off. However, the indicator will not come on.
The passenger airbag off indicator may come on and off repeatedly if the total weight on the seat is near the airbag cutoff threshold.
If an adult or teenage passenger is riding in front, move the seat as far to the rear as possible, and have the passenger sit upright and wear the seat belt properly.
If the indicator comes on with no front seat passenger and no objects on the seat, or with an adult riding there, something may be interfering with the weight sensors. Look for and remove:
Airbag Service Your airbag systems are virtually maintenance free, and there are no parts you can safely service. However, you must have your vehicle serviced if:
Any items under the front passenger’s seat.
Any object(s) hanging on the seat or in the seat-back pocket.
Any object(s) touching the rear of the seat-back.
If no obstructions are found, have your vehicle checked by a dealer as soon as possible.
Any airbag
Anairbageverinflates. that has deployed must be replaced along with the control unit and other related parts. Any seat belt tensioner that activates must also be replaced.
We recommend against the use of salvaged airbag system components, including the airbag, tensioners, sensors, and control unit.
Do not try to remove or replace any airbag by yourself. This must be done by an authorized dealer or a knowledgeable body shop.
32
12/08/09 16:03:29 31SJC670_040
TheSRSindicatoralertsyoutoa Take your vehicle to an problem. authorized dealer as soon as possible. If you ignore this indication, your airbags may not operate properly.
Even if your
Ifyourvehiclehasamoderateto severeimpact. airbags do not inflate, your dealer should inspect the driver’s seat position sensor, the front passenger’s weight sensors, the front seat belt tensioners, and all seat belts and their anchors worn during a crash to make sure they are operating properly.
Additional Information About Your Airbags
Additional Safety Precautions
Donotattempttodeactivateyour airbags. seat belts provide the best protection.
Together, airbags and
Donottamperwithairbag componentsorwiringforany Tampering could cause reason. the airbags to deploy, possibly causing very serious injury.
Donotexposethefrontpassenger’s If water or seat-backtoliquid. another liquid soaks into a seat- back, it can prevent the side airbag cutoff system from working properly.
Donotremoveormodifyafront seatwithoutconsultingyour This could make the dealer. driver’s seat position sensor or the front passenger’s weight sensors ineffective. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, first contact Honda Automobile Customer Service at (800) 999-1009 in the US, or Honda Customer Relations at 1- 888-9-HONDA-9 in Canada.
33
12/08/09 16:03:36 31SJC670_041
Protecting Children General Guidelines
−
All Children Must Be Restrained Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, traffic collisions are the number one cause of death of children age 12 and under.
To reduce the number of child deaths and injuries, every state, Canadian province and territory requires that infants and children be properly restrained when they ride in a vehicle.
Infantsandsmallchildrenmustbe restrainedinanapprovedchildseat thatisproperlysecuredtothe vehicle
(see pages
39
50
).
−
Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.
Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt and use a booster seat if necessary.
Largerchildrenmustberestrained withalap/shoulderbeltandrideon aboosterseatuntiltheseatbeltfits ). themproperly
(see pages
54
51
−
Children depend on adults to protect them. However, despite their best intentions, many adults do not know how to passengers.
protect child
properly
If you have children, or ever need to drive with a child in your vehicle, be sure to read this section. It begins with important general guidelines, then presents special information for infants, small children, and larger children.
34
12/08/09 16:03:46 31SJC670_042
All Children Should Sit in a Back Seat According to crash statistics, children of all ages and sizes are safer when they are restrained in a back seat.
The National Highway Traffic Safety Administration and Transport Canada recommend that all children aged 12 and under be properly restrained in a back seat. Some states have laws restricting where children may ride.
Children who ride in the back are less likely to be injured by striking interior vehicle parts during a collision or hard braking. Also, children cannot be injured by an inflating front airbag when they ride in the back.
Protecting Children General Guidelines
−
The Passenger’s Front Airbag Can Pose Serious Risks Front airbags have been designed to help protect adults in a moderate to severe frontal collision. To do this, the passenger’s front airbag is quite large, and it can inflate with enough force to cause very serious injuries.
Even though your vehicle has an advanced front airbag system that automatically turns the passenger’s front airbag off under certain circumstances (see page follow these guidelines:
), please
31
Infants Neverputarear-facingchildseatin thefrontseatofavehicleequipped If withapassenger’sfrontairbag. the airbag inflates, it can hit the back of the child seat with enough force to kill or very seriously injure an infant.
SmallChildren Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sfrontairbagcan If the vehicle seat is behazardous. too far forward, or the child’s head is thrown forward during a collision, an inflating front airbag can strike the child with enough force to kill or very seriously injure a small child.
Whenever possible,
LargerChildren Childrenwhohaveoutgrownchild seatsarealsoatriskofbeinginjured orkilledbyaninflatingpassenger’s frontairbag. larger children should sit in the back seat, on a booster seat if needed, and be properly restrained with a seat belt (see page information about protecting larger children).
for important
51
CONTINUED
35
12/08/09 16:03:56 31SJC670_043
Protecting Children General Guidelines
−
U.S.Models
SUN VISORS
DASHBOARD
To remind you of the passenger’s front airbag hazards, and that children must be properly restrained in a back seat, your vehicle has warning labels on the dashboard (U.S. models) and on the front visors. Please read and follow the instructions on these labels.
CanadianModels
SUN VISORS
36
12/08/09 16:04:04 31SJC670_044
Protecting Children General Guidelines
−
If You Must Drive with Several Children Your vehicle has a back seat where children can be properly restrained. If you ever have to carry a group of children, and a child must ride in front:
If a Child Requires Close Attention Many parents say they prefer to put an infant or a small child in the front passenger seat so they can watch the child, or because the child requires attention.
If a child requires close physical attention or frequent visual contact, we strongly recommend that another adult ride with the child in the back seat. The back seat is far safer for a child than the front.
Place the largest child in the front seat, provided the child is large enough to wear the lap/shoulder belt properly (see page
51
).
Move the vehicle seat as far to the rear as possible (see page
119
).
Have the child sit upright and well back in the seat (see page
17
).
Placing a child in the front seat exposes the child to hazards in a frontal collision, and paying close attention to a child distracts the driver from the important tasks of driving, placing both of you at risk.
Make sure the seat belt is properly
positioned and secured (see page
16
).
37
12/08/09 16:04:12 31SJC670_045
Protecting Children General Guidelines
−
Additional Safety Precautions
Neverholdaninfantorchildon If you are not wearing a yourlap. seat belt in a crash, you could be thrown forward and crush the child against the dashboard or a seat-back. If you are wearing a seat belt, the child can be torn from your arms and be seriously hurt or killed.
Neverputaseatbeltoveryourself andachild. belt could press deep into the child and cause serious or fatal injuries.
During a crash, the
Neverlettwochildrenusethe If they do, they sameseatbelt. could be very seriously injured in a crash.
Makesureanyunusedseatbelt thatachildcanreachisbuckled, thelockableretractorisactivated, andthebeltisfullyretractedand locked.
If a child wraps a loose
38
seat belt around their neck, they can be seriously or fatally injured. (See pages activate and deactivate the lockable retractor.)
for how to
and
46
47
Usethechildproofdoorlocksto preventchildrenfromopeningthe reardoors. children from accidentally falling out (see page
This can prevent
104
).
Donotleavechildrenaloneina Leaving children without vehicle. adult supervision is illegal in most states, Canadian provinces and territories, and can be very hazardous.
For example, infants and small children left in a vehicle on a hot day can die from heatstroke. A child left alone with the key in the ignition switch can accidentally set the vehicle in motion, possibly injuring themselves or others.
LockalldoorsandtheIn-Bed Trunkwhenyourvehicleisnotin Children who play in vehicles use. can accidentally get trapped inside. Teach your children not to play in or around vehicles. Know how to operate the emergency In-Bed Trunk opener and decide if your children should be shown how to use this feature (see page ).
117
Teachyourchildrennottoplayon thepickupbed. closing the tailgate could cause accidental injuries.
Opening or
Even very young
Keepvehiclekeys/remote transmittersoutofthereachof children. children learn how to unlock vehicle doors, turn on the ignition switch, and open the windows, which can lead to accidental injury or death.
12/08/09 16:04:21 31SJC670_046
Protecting Infants
ChildSeatType An infant must be properly restrained in a rear-facing, reclining child seat until the child reaches the seat maker’s weight or height limit for the seat, and the child is at least one year old.
Only a rear-facing child seat provides proper support for a baby’s head, neck, and back.
Protecting Infants and Small Children
Two types of seats may be used: a seat designed exclusively for infants, or a convertible seat used in the rear- facing, reclining mode.
Donotputarear-facingchildseatin If placed aforward-facingposition. facing forward, an infant could be very seriously injured during a frontal collision.
Rear-facingChildSeatPlacement A rear-facing child seat can be placed in any seating position in the back seat, but not in the front. rear-facingchildseatinthefront seat.
Neverputa
If the passenger’s front airbag inflates, it can hit the back of the child seat with enough force to kill or seriously injure an infant.
When properly installed, a rear- facing child seat may prevent the driver or a front passenger from moving their seat as far back as recommended, or from locking their seat-back in the desired position.
It could also interfere with proper operation of the passenger’s advanced front airbag system.
CONTINUED
39
12/08/09 16:04:30 31SJC670_047
Protecting Infants and Small Children
In any of these situations, we strongly recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.
Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash.
Always place a rear-facing child seat in the back seat, not the front.
40
Protecting Small Children
ChildSeatType Many states, Canadian provinces and territories allow a child one year of age or older who also meets the minimum size and weight requirements to transition from a rear-facing child seat to a forward facing seat. Know the requirements where you are driving and follow the child seat instructions. Many experts recommend use of a rear-facing seat up to age two, if the child’s height
and weight are appropriate for a rear-facing seat.
Of the different seats available, we recommend those that have a five- point harness system as shown.
We also recommend that a small child use the child seat until the child reaches the weight or height limit for the seat.
ChildSeatPlacement We strongly recommend placing a forward-facing child seat in a back seat, not the front.
If the vehicle seat is too
Placingaforward-facingchildseatin thefrontseatofavehicleequipped withapassenger’sairbagcanbe hazardous. far forward, or the child’s head is thrown forward during a collision, an inflating airbag can strike the child with enough force to cause very serious or fatal injuries.
12/08/09 16:04:36 31SJC670_048
Protecting Infants and Small Children, Selecting a Child Seat
Even with advanced front airbags that automatically turn the passenger’s front airbag off (see page place for a small child.
), a back seat is the safest
31
If it is necessary to put a forward- facing child seat in the front, move the vehicle seat as far to the rear as possible, and be sure the child seat is firmly secured to the vehicle and the child is properly strapped in the seat.
Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inflates.
If you must place a forward- facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.
Selecting a Child Seat Most child seats are LATCH- compatible (Lower Anchors and Tethers for CHildren). Some have a rigid-type connector, while others have a flexible-type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturer’s use and care instructions as well as the instructions in this manual. Proper installation is key to maximizing your child’s safety.
In seating positions and vehicles not equipped with LATCH, a LATCH- compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/shoulder belt.
In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH- compatible seat once a child reaches a specified weight. Please read the child seat owner’s manual for proper installation instructions.
41
12/08/09 16:04:45 31SJC670_049
Selecting a Child Seat, Installing a Child Seat
Important considerations when selecting a child seat Make sure the child seat meets the following three requirements:
The child seat is the correct type and size for the child.
The child seat is the correct type for the seating position.
The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213.
Installing a Child Seat After selecting a proper child seat and a good place to install the seat, there are three main steps in installing the seat:
1.
Properlysecurethechildseatto All child seats must be thevehicle. secured to the vehicle with the lap part of a lap/shoulder belt or with the LATCH (Lower Anchors and Tethers for CHildren) system. A child whose seat is not properly secured to the vehicle can be endangered in a crash.
2.
After installing a child
Makesurethechildseatisfirmly secured. seat, push and pull the seat forward and from side-to-side to verify that it is secure.
A child seat secured with a seat belt should be installed as firmly as possible. However, it does not need to be ‘‘rock solid.’’ Some side-to-side
42
movement can be expected and should not reduce the child seat’s effectiveness.
If the child seat is not secure, try installing it in a different seating position, or use a different style of child seat that can be firmly secured.
3.
Securethechildinthechildseat. Make sure the child is properly strapped in the child seat according to the child seat maker’s instructions. A child who is not properly secured in a child seat can be seriously injured in a crash.
The following pages provide guidelines on how to properly install a child seat. A forward-facing child seat is used in all examples, but the instructions are the same for rear- facing child seats.
12/08/09 16:04:55 31SJC670_050
Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the rear seats.
The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH.
The location of each lower anchor is indicated by a small button above the anchor point.
Whenever using the center tether anchor point, make sure to push down the head restraint to the lowest position, route the strap over the seat-back, then around the upper guide before attaching the tether strap hook to the center tether anchor (see page
49
).
Installing a Child Seat
BUTTON
UPPER GUIDE
LATCH ANCHOR POINTS
To install a LATCH-compatible child seat:
3.
1.
2.
If needed, move the seat belt buckle or tongue away from the lower anchors.
Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors.
CENTER TETHER ANCHOR
Onthecenterseatingposition When using the tether strap on the child seat, attach the tether strap hook to the center tether anchor before installing the child seat to the lower anchors for the LATCH system, because the center tether anchor is positioned behind the child seat.
CONTINUED
43
12/08/09 16:05:00 31SJC670_051
Installing a Child Seat
Make sure the head restraint is in the lowest position. Lift the cover, then route the tether strap around the upper guide. Route the tether strap downward properly, making sure the strap is not twisted, then attach the strap hook to the center tether anchor.
44
Rigid type
Flexible type
4.
Place the child seat on the vehicle seat, then attach the seat to the lower anchors according to the child seat maker’s instructions.
Some LATCH-compatible seats have a rigid-type connector as shown above.
Other LATCH-compatible seats have a flexible-type connector as shown above.
5.
Whatever type you have, follow the child seat maker’s instructions for adjusting or tightening the fit.
12/08/09 16:05:07 31SJC670_052
UPPER GUIDE
UPPER GUIDE
Installing a Child Seat
Outer Position
TETHER ANCHOR
Center Position
TETHER ANCHOR
7.
Tighten the strap according to the seat maker’s instructions.
8.
Push and pull the child seat forward and from side-to-side to verify that it is secure.
6.
Ontheouterseatingposition
Lift the head restraint (see page
), then route the tether strap
123
over the seat-back and through
the head restraint legs.
Lift the cover, then route the
tether strap around the upper
guide. Route the tether strap
downward properly, making sure
the strap is not twisted, then
attach the strap hook to the tether
anchor on the outside of the seat
bottom (see page
48
).
45
12/08/09 16:05:15 31SJC670_053
Installing a Child Seat
Installing a Child Seat with a Lap/ Shoulder Belt When not using the LATCH system, all child seats must be secured to the vehicle with the lap part of a lap/ shoulder belt.
In addition, the lap/shoulder belts in all seating positions except the driver’s have a lockable retractor that must be activated to secure a child seat.
If you intend to install the child seat in the rear center seating position and use the tether strap for additional security, make sure to push down the head restraint to the lowest position and hook the tether strap hook to the anchor before securing the child seat with the lap/ shoulder belt. Refer to page how to route the tether strap properly.
for
48
1.
With the child seat in the desired seating position, route the belt through the child seat according to the seat maker’s instructions, then insert the latch plate into the buckle and remove any slack from the lap portion of the belt.
2.
3.
To activate the lockable retractor, slowly pull the shoulder part of the belt all the way out until it stops, then let the belt feed back into the retractor.
After the belt has retracted, tug on it. If the belt is locked, you will not be able to pull it out. If you can pull the belt out, it is not locked, and you will need to repeat these steps.
46
12/08/09 16:05:21 31SJC670_054
Installing a Child Seat
To deactivate the lockable retractor and remove a child seat, unlatch the buckle, unroute the seat belt, and let the belt fully retract.
47
4.
After confirming that the belt is locked, grab the shoulder part of the belt near the buckle, and pull up to remove any slack from the lap part of the belt. Remember, if the lap part of the belt is not tight, the child seat will not be secure.
To remove slack, it may help to put weight on the child seat, or push on the back of the seat while pulling up on the belt.
5.
Push and pull the child seat forward and from side-to-side to verify that it is secure enough to stay upright during normal driving maneuvers. If the child seat is not secure, unlatch the belt, allow it to retract fully, then repeat these steps.
12/08/09 16:05:29 31SJC670_055
Installing a Child Seat
Installing a Child Seat with a Tether
COVER
CENTER TETHER ANCHOR
UPPER GUIDE
OUTER TETHER ANCHOR
A child seat with a tether can be installed in any seating position in the back seat. Each outer seating position has a tether anchor at the outside of the seat bottom. The center seating position has a tether anchor between the lower anchors for the LATCH- compatible child seat. Each anchor point is shown above.
48
UsinganOuterTetherAnchor
UPPER GUIDE
When using a tether anchor, always hook the tether strap through the upper guide to route it properly.
Since a tether can provide additional security to the lap/shoulder belt installation, we recommend using a tether whenever one is required or available.
OUTER TETHER ANCHOR
1.
After properly securing the child seat (see page ), lift the head restraint, then route the tether strap over the seat-back and through the head restraint legs.
46
2.
Lift the cover, then hook the tether strap through the upper guide as shown.
12/08/09 16:05:38 31SJC670_056
3.
4.
Route the tether strap downward properly, making sure the strap is not twisted.
Attach the tether strap hook to the outer tether anchor on the outside of the seat bottom.
5.
Tighten the strap according to the seat maker’s instructions.
UsingtheCenterTetherAnchor Make sure to attach the tether strap hook to the anchor before installing the child seat, because the tether anchor is positioned behind the child seat.
1.
Place the child seat on the rear seat.