Download PDF Manual

Operating the Cassette Player Turn the system ON. Insert the cassette into the slot with the tape opening to the right. Push the cassette in most of the way. The drive will pull it in the rest of the way and begin to play.


or will light to show you


The which side of the cassette is playing. The indicates the side you inserted facing upward is now playing. To play the other side of the tape, press the PROG button.


The system also has an Auto-reverse feature. It will automatically reverse direction when it reaches the end of the cassette.


EJECT BUTTON


PROG BUTTON


PLAY BUTTON


DOLBY BUTTON


CONTINUED


Comfort and Convenience Features


Main MenuTable of Contentsst Audio System


(S)


Dolby® noise reduction turns on when you insert a cassette. If the tape was not recorded with Dolby "B" noise reduction, turn it off by pressing the


button.


To remove the cassette from the drive, press the EJECT button. The system automatically ejects the cassette whenever you turn off the system or the ignition switch.


FF/REW/TMS SWITCH


EJECT BUTTON


PROG BUTTON


PLAY BUTTON


DOLBY BUTTON


REPEAT BUTTON


(Except S)


FF/REW/TMS SWITCH


EJECT BUTTON


PROG BUTTON


PLAY BUTTON


DOLBY BUTTON


REPEAT BUTTON


Comfort and Convenience Features


Main MenuTable of Contentsst Cassette Search Functions Once a cassette is playing, you can use the FF, REW, TMS, or REPEAT function to look for desired songs or passages.


To rewind the tape, push the F F/ REW/TMS switch down then release it. You will see REW in the display. To fast forward the tape, push the switch up then release it. You will see FF displayed. To stop rewind or fast forward, press the PLAY button. If the system reaches the end of the cassette while in fast forward or rewind, it automatically stops that function, reverses direction, and begins to play.


Press the REPEAT button to replay the current passage. You will see RPT displayed. When the system reaches the end of the song or passage that is being played, it automatically goes into rewind. When it senses the beginning of that


passage, it goes back to play. The system will continue repeating this passage until you turn off REPEAT by pressing the button again.


The TMS function lets you skip to the beginning of a song or other passage. The tape skips forward or backward, depending on which direction you push the FF/REW/ TMS switch.


Activate TMS by pushing the FF/ REW/TMS switch and holding it until you hear a beep. If you push the switch down, you will see REW blinking in the display as the tape rewinds. If you push the switch up, you will see FF blinking in the display as the tape fast forwards. When the system senses a silent period on the tape, it goes back to PLAY mode.


Audio System


The REPEAT and TMS functions use silent periods on the tape to find the end of a selection. These features may not work satisfactorily on tapes that have almost no gap between songs, a high noise level between songs, or silent periods in the middle of songs.


Caring for Cassettes Damaged cassettes can jam inside the drive or cause other problems. See page 94 for information on cassette care and protection.


Comfort and Convenience Features


Main MenuTable of Contentsst Audio System


Operating the CD Changer or Player (Optional) A Compact Disc changer is available for your car. It holds up to six discs, providing several hours of continu- ous programming. You operate the CD changer with the same controls used for the radio and cassette player.


Load the desired CD's in the magazine and load the magazine in the changer according to the instructions that came with the unit.


Your dealer has Genuine Honda accessory in-dash CD players available that are operated by the radio controls. If you have one of these units, use the directions in this section (except for multi-disc selection) to operate it.


Comfort and Convenience Features


To operate the CD changer, the ignition key must be in ACCESSORY (I) or ON (II). If you are listening to a cassette tape, eject it before playing a CD.


Press the CD button until "CD" appears on the display. Once in the CD mode, the system will start to play the first track of the first disc in the magazine.


When that disc ends, the next disc in the magazine is loaded and played.


After disc 6 has completed, the system will return to disc 1. To make your own disc selection, push one of the six preset buttons. Your selection will appear in the display and start playing.


You can use the TUNE/SEEK switch while a disc is playing to select passages and change tracks. To move rapidly forward within a track, push up and hold the TUNE/ SEEK switch. Push down and hold the switch to move rapidly backward within a track. You will hear a beep a half second after you push the switch up or down. Keep pushing the switch until you think the track has advanced or returned to the desired position. The disc will start playing when you release the switch.


If you push the TUNE/SEEK switch up and release it before you hear a beep, the system will skip forward to the beginning of the next track on that CD. It will skip backward to the begin- ning of the current track if you push the switch down and release it.


Main MenuTable of Contentsst (S)


ON/OFF/VOL KNOB


RPT INDICATOR


Audio System


TUNE/SEEK SWITCH


CD BUTTON


REPEAT BUTTON


(Except S)


ON/OFF/VOL KNOB


A. SELECT INDICATOR


RPT INDICATOR


TUNE/SEEK SWITCH


CD BUTTON


A. SELECT/ REPEAT BUTTON


CONTINUED


Comfort and Convenience Features


Main MenuTable of Contentsst Audio System


If you push the REPEAT button on the S model or the A. SELECT/ REPEAT button on the other models, the system will continuously play the track you are listening to. You will see RPT in the display. Push the switch again to turn off REPEAT mode.


Comfort and Convenience Features


Except S model You can get the CD player to randomly select tracks by pressing A. SELECT/REPEAT until you see A. SELECT in the display. With this active, the system selects and plays the tracks randomly, rather than sequentially, on each disc. When the system has played all the tracks on that disc, it loads the next disc and starts to play randomly. The system continues to select and play tracks randomly on each of the six discs until you press the A. SELECT/REPEAT button again.


To turn on random play mode while the system is in the REPEAT mode, turn off REPEAT mode first by pressing the A. SELECT/REPEAT button. Then, press the button again as explained above.


If you change modes to radio or tape while a CD is playing, then change back to CD mode, the same disc and track will play.


If you turn off the system while a CD is playing, either with the ON- OFF/VOL knob or by turning off the ignition, the system will begin at the same disc and track when you turn it back on.


If you try to select an empty slot in the magazine, the system will select and play the first track of the next disc in the magazine.


To return to the radio function, press the AM/FM button.


Main MenuTable of Contentsst CD Error Indications If you see an error indication on the display, find the cause in the chart to the right. If you cannot clear the error indication, take the car to your Honda dealer.


Audio System


Comfort and Convenience Features


Main MenuTable of Contentsst Caring for the Cassette Player


CLEAN INDICATOR


The cassette drive picks up dirt and oxides whenever you play a tape. This builds up over time and causes the sound quality to degrade. To prevent this, you should clean the cassette drive after every 30 hours of use. Your dealer has a cleaning kit available for this purpose.


After 30 hours of tape use, you will see CLEAN flashing for 5 seconds in the display when you insert a tape into the tape slot. If you are already


Comfort and Convenience Features


regularly cleaning the tape drive at least every 30 hours, reset the indicator by pressing the Preset 6
button while the system is in the tape operation mode. Hold the button until you hear a beep and the CLEAN indicator goes out.


If you do not clean the cassette drive regularly, it may eventually become impossible to remove the deposits with a normal cleaning kit.


The cassette player automatically ejects cassettes that do not play normally. If it ejects a cassette before it begins to play, it is probably defective and should not be inserted again. You may have a cassette suddenly stop playing, reverse directions once or twice and then eject. This is normally an indication the tape is wound unevenly. It should play normally after being manually rewound.


Use 100-minute or shorter cassettes. Cassettes longer than 100 minutes use thinner tape that may break or jam the drive.


Look at a cassette before you insert it. If the tape is loose, tighten it by turning one of the hubs with a pencil or your finger.


If the label is peeling off, do not put it in the player. It may cause the cassette to jam in the drive mecha- nism when you try to eject it.


Do not leave cassettes sitting where they are exposed to high heat or humidity, such as on top of the dashboard or in the player. If a cassette is exposed to extreme heat or cold, let it reach a moderate temperature before putting it in the player.


Main MenuTable of Contentsst Except S model Your car's audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, the user must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.


You should have received a card that lists your audio system's code number and serial number. It is best to store this card in a safe place at home, or to keep it in your wallet or purse. In addition, you should write the audio system's serial number in this Owner's Manual. If you should happen to lose the card, you must obtain the code number from your Honda dealer. To do this, you will need the system's serial number.


If your car's battery is disconnected or goes dead, the audio system will disable itself. If this happens, you will see "Code" in the frequency display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.


If you make a mistake entering the code, do not start over or try to correct your mistake. Complete the five-digit sequence, then enter the correct code. You have three tries to enter the correct code. If you are unsuccessful in three attempts, you must then leave the system on for one hour before trying again.


Theft Protection


You will have to store your favorite stations in the Preset buttons after the system begins working. Your original settings were lost when power was disconnected.


Comfort and Convenience Features


Main MenuTable of Contentsst Before you begin driving your Honda, you should know what gasoline to use, and how to check the levels of important fluids. You also need to know how to properly stow luggage or packages. This section will help you. If you plan to add any accesso- ries to your car, please read the information in this section first.


Before Driving


Break-in Period................................ 98
Gasoline............................................ 98
Oxygenated Fuels........................ 98
Driving in Foreign Countries..... 99
Service Station Procedures.......... 100
Filling the Fuel Tank................. 100
Opening the Hood..................... 101
Fuel Economy................................ 104
Vehicle Condition...................... 104
Driving Habits............................ 104
Accessories..................................... 105
Loading Cargo................................ 106


Before Driving


Main Menust Break-in Period, Gasoline


Break-in Period Help assure your car's future reliability and performance by paying extra attention to how you drive during the first 1,000 km (600 miles). During this period:


Avoid full-throttle starts and rapid acceleration.


If you need to add oil, use the engine oil recommended in this owner's manual.


Avoid hard braking. New brakes need to be broken-in by moderate use for the first 300 km (200
miles).


You should follow these same re- commendations with an overhauled or exchanged engine, or when the brakes are relined.


Before Driving


Gasoline Your Honda is designed to operate most effectively on unleaded gasoline.


We recommend gasolines containing detergent additives that help prevent fuel system and engine deposits.


Using gasoline containing lead will damage your car's emission controls. This contributes to air pollution and can void certain parts of your warranty.


(S model) Use an unleaded gasoline with a pump octane number of 86 or higher. Use of a lower octane gasoline can cause a persistent, heavy metallic rapping noise in the engine that can lead to mechanical damage.


(All other models) Use a premium unleaded gasoline with a pump octane number of 91 or higher. If you are unable to find premium unleaded, you may substitute an unleaded regular gasoline. The engine will compensate for the lower octane, but you may notice a slight decrease in power as a result.


Oxygenated Fuels Some conventional gasolines are being blended with alcohol or an ether compound. These gasolines are collectively referred to as oxygenated fuels. To meet clean air standards, some areas of the United States and Canada use oxygenated fuels to help reduce emissions.


If you use an oxygenated fuel, be sure it is unleaded and meets the minimum octane rating requirement.


Main MenuTable of Contentsst Gasoline


Before using an oxygenated fuel, try to confirm the fuel's contents. Some states/provinces require this information to be posted on the pump.


The following are the EPA-approved percentages of oxygenates:


ETHANOL (ethyl or grain alcohol) You may use gasoline containing up to 10% ethanol by volume. Gasoline containing ethanol may be marketed under the name "Gasohol."


MTBE (Methyl Tertiary Butyl Ether) You may use gasoline containing up to 15% MTBE by volume.


METHANOL (methyl or wood alcohol) You may use gasoline containing up to 5% methanol by volume as long as it also contains cosolvents and corrosion inhibitors to protect the fuel system. Gasoline containing more than 5% methanol by volume may cause starting and/or perform- ance problems. It may also damage metal, rubber and plastic parts of your fuel system.


If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


Fuel system damage or performance problems resulting from the use of an oxygenated fuel containing more than the percentages of oxygenates given above are not covered under warranty.


Driving in Foreign Countries Using any type of leaded gasoline in your Honda will affect performance and damage its emission controls. Unleaded gasoline may not be available in other countries. If you are planning to take your car outside the U.S. or Canada, write to Honda at the address shown for information about any modifications your car may need. Be sure to include the year and model of your car.


U.S. Owners: American Honda Motor Co., Inc. Consumer Affairs 1919 Torrance Blvd. Torrance, CA 90501-2746


Canadian Owners: Honda Canada Inc. 715 Milner Ave. Scarborough, Ontario M1B 2K8


Before Driving


Main MenuTable of Contentsst Service Station Procedures


Filling the Fuel Tank


Pull


1. The fuel fill is on the driver's side


of the car. Park with that side closest to the service station pumps.


2. Open the fuel fill door by pulling


on the handle to the left of the driver's seat.


Before Driving


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


Stop the engine and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.


3. Remove the fuel fill cap slowly.


You may hear a hissing sound as pressure inside the tank escapes. Place the fuel fill cap on the inside of the door as shown.


4. Stop filling the tank after the fuel pump automatically clicks off. Do not try to "top off" the tank, leave some room for the fuel to expand with temperature changes.


5. Screw the fuel fill cap back on,


tighten it until it clicks more than twice.


6. Push the fuel fill door until it


latches.


FUEL FILL CAP


Main MenuTable of Contentsst Opening the Hood


Service Station Procedures


LATCH


HOOD RELEASE HANDLE


1. Shift to Park or Neutral and set the parking brake. Pull the hood release handle, located under the left lower corner of the dashboard. The hood will pop up slightly.


2. Standing in front of the car, put


your fingers under the front edge of the hood to the right of center. Slide your hand to the left until you feel the hood latch handle. Push this handle to the left until it releases the hood. Lift the hood.


CLIP SUPPORT ROD 3. Pull the support rod out of its clip


and insert the end into the hole on the left side of the hood.


To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot above the fender, then let it drop.


CONTINUED


Before Driving


Main MenuTable of Contentsst Service Station Procedures


Oil Check


DIPSTICK


Check the engine oil level every time you fill the car with fuel. Wait at least two minutes after turning the engine off before you check the oil.


1. Remove the dipstick (orange


handle).


Before Driving


2. Wipe the dipstick with a clean


cloth or paper towel.


3. Insert it all the way back in its tube.


Main MenuTable of Contentsst Service Station Procedures


Engine Coolant Check


Refer to Periodic Checks on page 136 for information on checking other items in your Honda.


MAX MIN


UPPER MARK LOWER MARK


4. Remove it again and check the level. It should be between the upper and lower marks.


If it is near or below the lower mark, see page 138 for information on the proper oil and how to add it.


RESERVE TANK


Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If it is below the MIN line, see Adding Engine Coolant on page 144 for information on adding the proper coolant.


Before Driving


Main MenuTable of Contentsst Driving Habits You can improve fuel economy by driving moderately. Rapid acceler- ation, abrupt cornering, and hard braking use more fuel.


Always drive in the highest gear that allows the engine to run and acceler- ate smoothly.


Depending on traffic conditions, try to maintain a constant speed. Every time you slow down and speed up, your car uses extra fuel. Use the cruise control, when appropriate, to increase fuel economy.


A cold engine uses more fuel than a warm engine. It is not necessary to "warm-up" a cold engine by letting it idle for a long time. You can drive away in about a minute, no matter how cold it is outside. The engine will warm up faster, and you get better fuel economy. To cut down on the number of "cold starts," try to combine several short trips into one.


The air conditioning puts an extra load on the engine which makes it use more fuel. Turn off the A/C to cut down on air conditioning use. Use the flow-through ventilation when the outside air temperature is moderate.


Fuel Economy


The condition of your car and your driving habits are the two most important things that affect the fuel mileage you get.


Vehicle Condition Always maintain your car according to the maintenance schedule. This will keep it in top operating condition.


An important part of that mainte- nance is the Periodic Checks (see page 136). For example an under- inflated tire causes more "rolling resistance," which uses fuel. It also wears out faster, so check the tire pressure at least monthly. In winter, the build-up of snow on your car's underside adds weight and rolling resistance. Frequent cleaning helps your fuel mileage and reduces the chance of corrosion.


Before Driving


Main MenuTable of Contentsst Your Honda dealer has many acces- sories available to personalize your car. Some of these are audio systems, alloy wheels, air conditioning, and color-coordinated carpet floor mats. All Genuine Honda Accessories have been approved by our engineers for installation and use on your car, and are covered by warranty.


Accessories


Some non-Honda accessories you can buy in the "aftermarket" are designed for universal applications. Although they may fit your Honda, they may not be within factory specifications. For example, after- market wheels may not meet Honda's specifications for width and offset. They could cause suspension problems which would not be covered by your warranty. Im- properly-designed accessories can adversely affect your car's handling and stability.


Electronic communications equip- ment, such as cellular telephones and two-way radios are regulated by the FCC (DOC in Canada) and should not interfere with your car's systems. Improper installation, or using electrical equipment not in- tended for mobile use may interfere with your car's operation. If you want to install a cellular telephone, other mobile communications equipment or even add-on stereo amplifiers, please discuss it first with your Honda dealer.


Your car has several computer- controlled systems, including the SRS system, the engine's fuel injection, and the Anti-lock brake system. Strong electronic inter- ference can affect their operation.


In many cases, improper installation is the real cause of problems with aftermarket accessories. Have these accessories installed by qualified technicians who are familiar with your Honda. If possible, have your Honda dealer inspect the final installation.


Before Driving


Main MenuTable of Contentsst Loading Cargo


The maximum load you can carry in your Honda is 325 kg (700 Ibs). It includes the total weight of all passengers and their belongings, any accessories, and the tongue weight of a trailer. This 325 kg (700 Ibs) figure is shown as the Vehicle Capacity Weight on the tire infor- mation label attached to the driver's doorjamb.


Before Driving


To figure out how much cargo you can carry:


Figure the total "occupant weight" you will be transporting. To do this, multiply the number of people (driver and all passengers) by 70
kg (150 Ibs). Subtract this number from the Vehicle Capacity Weight (325 k g/ 700 Ibs). If you are towing a trailer, subtract the tongue weight. See Towing a Trailer on page 122.


This final number is the total weight of cargo you can load in or on the car. With four occupants (driver and three passengers), the maximum recommended weight for cargo is 45
kg (100 Ibs).


Where you store this cargo, and how well you secure it, are just as important as how much it weighs. Make sure you load cargo so it will not shift while driving. When storing items in the trunk, place them as far forward as possible. You could store additional items on the floor behind the front seats. Make sure they cannot roll under the front seat and interfere with the pedals.


If you must carry large objects that prevent you from closing the trunk lid, be aware that exhaust gas can enter the interior. See Carbon Monoxide Hazard on page 25.


Never place items on the shelf behind the back seat. Those items can fly forward and injure you or your passengers if you brake hard or are involved in a collision.


Main MenuTable of Contentsst This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important infor- mation on your car's braking system and facts you need if you are plan- ning to tow a trailer.


Driving


Preparing to Drive......................... 108
Starting the Engine........................ 109


5-speed Manual


Transmission.......................... 109


Automatic


Transmission.......................... 109


Starting in Cold Weather


at High Altitude..................... 110
5-speed Manual Transmission..... 111
Recommended Shift Points...... 111
Maximum Speeds...................... 112
Automatic Transmission............... 113
Shift Lever Positions................. 113
Maximum Speeds...................... 115
Shift Lock Release..................... 116
The Braking System...................... 117
Brake Wear Indicators.............. 117
Brake System Design................ 117
Anti-lock Brakes........................ 118
Four Wheel Steering..................... 119
Driving in Bad Weather................ 120
Towing a Trailer............................ 122


Driving


Main Menust 10. Turn the ignition ON (II). Check the indicator lights in the instru- ment panel.


11. Start the engine (see page 109).


12. Check the gauges and indicator


lights in the instrument panel (see page 31).


5. Check the adjustment of the seat


(see page 53).


6. Check the adjustment of the


inside and outside mirrors (see page 61).


7. Check the adjustment of the


steering wheel (see page 45).


8. Make sure the doors are securely


closed and locked.


9. Fasten your seat belt. Check that


your passengers have fastened their seat belts (see page 7).


Preparing to Drive


You should do the following checks and adjustments every day before you drive your car.


1. Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.


2. Check that the hood and trunk are


fully closed.


3. Visually check the tires. If a tire


looks low, use a gauge to check its pressure.


4. Check that any items you may be


carrying with you inside are stored properly or fastened down securely.


Driving


Main MenuTable of Contentsst Starting the Engine


5-speed Manual Transmission 1. Apply the parking brake.


2. In cold weather, turn off all


electrical accessories to reduce the drain on the battery.


3. Push the clutch pedal down all the


way. START (III) does not function unless the clutch pedal is depressed.


4. Without touching the accelerator pedal, turn the ignition key to the START (III) position. If the engine does not start right away, do not hold the key in START (III) for more than 15 seconds at a time. Pause for at least 10 seconds before trying again.


5. If the engine does not start within


15 seconds, or starts but stalls right away, repeat step 4 with the accelerator pedal pressed half-way down. If the engine starts, release pressure on the accelerator pedal so the engine does not race.


6. If the engine still does not start,


press the accelerator pedal all the way down and hold it there while starting in order to clear flooding. As before, keep the ignition key in the START (III) position for no more than 15 seconds. Return to step 5 if the engine does not start. If it starts, lift your foot off the accelerator pedal so the engine does not race.


Automatic Transmission 1. Apply the parking brake.


2. In cold weather, turn off all


electrical accessories to reduce the drain on the battery.


3. Make sure the shift lever is in


Park. Press on the brake pedal.


4. Without touching the accelerator pedal, turn the ignition key to the START (III) position. If the engine does not start right away, do not hold the key in START (III) for more than 15 seconds at a time. Pause for at least 10 seconds before trying again.


CONTINUED


Driving


Main MenuTable of Contentsst 3. If the engine fails to start in step 2,


push the accelerator pedal to the floor and hold it there while you try to start the engine for no more than 15 seconds. If the engine does not start, return to step 2.


Starting the Engine


5. If the engine does not start within


15 seconds, or starts but stalls right away, repeat step 4 with the accelerator pedal pressed half-way down. If the engine starts, release pressure on the accelerator pedal so the engine does not race.


6. If the engine still does not start,


press the accelerator pedal all the way down and hold it there while starting in order to clear flooding. As before, keep the ignition key in the START (III) position for no more than 15 seconds. Return to step 5 if the engine does not start. If it starts, lift your foot off the accelerator pedal so the engine does not race.


Starting in Cold Weather at High Altitude (Above 2,400 meters/ 8,000 feet) An engine is harder to start in cold weather. The thinner air found at high altitude above 2,400 meters (8,000 feet) adds to the problem. Use the following procedure:


1. Turn off all electrical accessories


to reduce the drain on the battery.


2. Push the accelerator pedal half- way to the floor and hold it there while starting the engine. Do not hold the ignition key in START (III) for more than 15 seconds. When the engine starts, release the accelerator pedal gradually as the engine speeds up and smooths out.


Driving


Main MenuTable of Contentsst 5-speed Manual Transmission


Come to a full stop before you shift into reverse. You can damage the transmission by trying to shift into reverse with the car moving.


You can get extra braking from the engine when slowing down by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure engine speed will not go into the tachometer's red zone in the lower gear. Refer to the Maximum Speeds chart.


Rapid slowing or speeding-up can cause loss of control on slippery surfaces. If you crash, you can be injured.


Use extra care when driving on slippery surfaces.


Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you the best fuel economy and effective emis- sions control. The following shift points are recommended:


CONTINUED


Driving


The manual transmission is syn- chronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from Fifth to Reverse. When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can cause your clutch to wear out faster.


Main MenuTable of Contentsst 5-speed Manual Transmission


Maximum Speeds The speeds in this table are the maximums for the given gears. If you exceed these speeds, the engine speed will enter into the tachometer's red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine's computer controls. The engine will run normally when you reduce the RPM below the red zone.


(US: S, Canada: S)


(US: Si, Canada: SR, SR 4WS)


(US: VTEC, Canada: SR-V)


Driving


Main MenuTable of Contentsst Automatic Transmission


Your Honda's transmission has four forward speeds, and is electronically controlled for smoother shifting. It also has a "lock-up" torque converter for better fuel economy. You may feel what seems like another shift when the converter locks.


Shift Lever Positions


LEADED LY


SHIFT LEVER


This display is on the instrument panel. It shows you the position of the shift lever. It also indicates a possible problem in the transmission if the "D4" indicator light flashes.


The shift lever has seven positions. It must be in Park or Neutral to start the engine. When you are stopped in D4, D3, 2, 1, N or R, press firmly on the brake pedal and keep your foot off the accelerator pedal.


CONTINUED


Driving


Main MenuTable of Contentsst Automatic Transmission


Reverse (R) — To shift to Reverse from Park, see the explanation under Park. To shift to Reverse from Neutral, come to a complete stop and then shift. Press the release button before shifting into Reverse from Neutral.


Neutral (N) — Use Neutral if you need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to Park posi- tion if you need to leave the car for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another gear.


Drive (D4) — Use this position for your normal driving. The transmis- sion automatically selects a suitable gear for your speed and acceleration. You may notice the transmission shifting up at higher speeds when the engine is cold. This helps the engine warm up faster.


Park (P) — This position mechani- cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the side of the shift lever to move it.


If you have done all of the above and still cannot move the lever out of Park, see Shift Lock Release on page 116.


You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.


Driving


Main MenuTable of Contentsst gear when starting out on a slippery surface or in deep snow. It will help reduce wheelspin.


Whenever you move the shift lever to a lower gear, the transmission downshifts only if the engine's redline will not be exceeded in the lower gear.


First (1) — To shift from Second to First, press the release button on the side of the shift lever. With the lever in this position, the transmission locks in First gear. By upshifting and downshifting through 1, 2, D3 and D4, you can operate this transmission much like a manual transmission without a clutch pedal.


Drive (D3) — This position is similar to D4, except only the first three gears are selected. Use D3 to provide engine braking when going down a steep hill. D3 can also keep the transmission from cycling between third and fourth gears in stop-and-go driving.


For faster acceleration when in D3 or D4, you can get the transmission to automatically downshift by pushing the accelerator pedal to the floor. The transmission will shift down one or two gears, depending on your speed.


Second (2) — To shift to Second, press the release button on the side of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop. Second gives you more power when climbing, and increased engine braking when going down steep hills. Use second


Automatic Transmission


Maximum Speeds The speeds in this table are the maximums for the given position. If you exceed these speeds, the engine speed will enter into the tachometer's red zone. If this occurs, you will feel the engine cut in and out. This is caused by a limiter in the engine's computer controls. The engine will run normally when you reduce the RPM below the red zone.


(US: S, Canada: S)


CONTINUED


Driving


Main MenuTable of Contentsst Automatic Transmission


(US: Si, Canada: SR, SR 4WS)


Driving


Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.


1. Set the Parking brake.


2. Remove the key from the ignition


switch.


3. Insert the key in the Shift Lock


Release slot next to the shift lever.


4. Push down on the key while you


press the release button and move the shift lever out of Park to Neutral.


RELEASE BUTTON


SHIFT LOCK RELEASE SLOT


5. Remove the key from the Shift Lock Release slot. Depress the brake pedal and restart the engine.


If you need to use the Shift Lock Release, it could mean your car is developing a problem. Have the car checked by your Honda dealer.


Main MenuTable of Contentsst Your Honda is equipped with disc brakes at all four wheels. The braking system is power-assisted to reduce the effort needed on the brake pedal.


Put your foot on the brake pedal only when you intend to brake. Resting your foot on the pedal keeps the brakes applied lightly, causing them to build up heat. Heat build-up can reduce how well your brakes work. It also keeps your brake lights on all the time, confusing drivers behind you.


Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by downshifting to a lower gear and taking your foot off the accelerator pedal.


Check your brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Since a longer distance is needed to stop with wet brakes, be extra cautious and alert in your driving.


Brake Wear Indicators All four brakes have audible brake wear indicators. When the brake pads need replacing, you will hear a distinctive metallic "screeching" sound when you apply the brakes. If you do not have the brake pads replaced, they will begin screeching all the time.


Your brakes may sometimes squeal or squeak when you apply them lightly. Do not confuse this with the brake wear indicators. They make a very audible "screeching".


The Braking System


Brake System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the car (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.


Front


CONTINUED


Driving


Main MenuTable of Contentsst The Braking System


If this happens, you will immediately notice that the brake pedal goes down much farther and you need to press on it much harder. A much longer distance will be needed to stop the car.


Slow the car by downshifting to a lower gear and removing your foot from the accelerator pedal. Pull to the side of the road as soon as it is safe. Because of the longer stopping distance needed, brake system failure is very hazardous. It is best to have your car towed, but if you must drive the car in this condition, be extremely cautious. Have your car repaired as soon as possible.


Driving


Anti-lock Brakes All models except the S model have an Anti-lock Brake System (ABS) as standard equipment.


The ABS is always "On". It requires no special effort or driving technique. You will feel a pulsation in the brake pedal when the ABS activates.


ABS helps you maintain steering control. It does this by helping you to prevent the wheels from locking up and skidding.


Activation varies with the amount of traction your tires have. On dry pavement, you will need to press on the brake pedal very hard before you feel the pedal pulsation that means the ABS has activated. However, you may feel the ABS activate immedi- ately if you are trying to stop on snow or ice. Under all conditions, the ABS is helping to prevent the wheels from locking so you can retain steering control. You should con- tinue to press on the brake pedal with the same force.


You may feel a slight movement of the brake pedal just after you start the engine. This is the ABS working.


Main MenuTable of Contentsst The Braking System, Four Wheel Steering


A car with ABS may require a longer distance to stop on loose or uneven surfaces than an equivalent car with- out Anti-lock. The ABS cannot make up for road conditions or bad judg- ment. It is still your responsibility to drive at reasonable speeds for weather and traffic conditions, and to leave a margin of safety.


For a technical description of the ABS hardware, refer to page 216.


Four Wheel Steering The Canadian SR 4WS model features an electronically controlled system that steers the rear wheels as you steer the front wheels. It uses the car's speed, angle of the front wheels, and the rate that you turn the steering wheel to steer the rear wheels in the appropriate direction and angle.


ABS INDICATOR*


* U.S. indicator shown


The ABS is self-checking. If anything goes wrong, the ABS indicator on the instrument panel comes on (see page 34). This means the Anti-lock function of the braking system has shut down. The brakes still work like a conventional system, providing normal stopping ability. You should have the dealer inspect your car as soon as possible.


CONTINUED


Driving


Main MenuTable of Contentsst Four Wheel Steering, Driving in Bad Weather


At very slow speeds, the rear wheels steer in the opposite direction to the front wheels. This helps in maneuvers such as parallel parking and U-turns.


At higher speeds, the rear wheels first steer in the same direction as the front wheels. This aids with changing lanes. As you turn the steering wheel more, the rear wheels return to straight ahead and then steer in the opposite direction to the front wheels. This gives improved handling when going around curves at highway speeds.


The rear wheels return to the straight ahead position when you turn off the engine. They also return to straight ahead if you sit still for more than two minutes with the engine running. They return to steering mode as soon as you move the steering wheel or start to drive away.


The 4WS system is self-checking. If it detects a problem anywhere in the system, it turns on the 4WS indicator on the instrument panel (see page 35) and points the rear wheels straight ahead. Your car will then drive like a conventional car without 4WS.


Driving in Bad Weather


Rain, fog, and snow conditions re- quire a different driving technique because of reduced traction and visibility. Keep your car well- maintained and exercise greater caution when you need to drive in bad weather. The cruise control should not be used in these condi- tions.


Driving


Main MenuTable of Contentsst Driving Technique — Always drive slower than you would in dry weather. It takes your car longer to react, even in conditions that may seem just barely damp. Apply smooth, even pressure to all the controls. Abrupt steering wheel movements or sudden, hard appli- cation of the brakes can cause loss of control in wet weather. Be extra cautious for the first few miles of driving while you adjust to the change in driving conditions. This is especially true in snow. A person can forget some snow-driving techniques during the summer months. Practice is needed to relearn those skills.


Exercise extra caution when driving in rain after a long dry spell. After months of dry weather, the first rains bring oil to the surface of the roadway, making it slippery.


Driving in Bad Weather


Visibility — Being able to see clearly in all directions and being visible to other drivers are important in all weather conditions. This is more difficult in bad weather. To be seen more clearly during daylight hours, turn on your headlights.


Traction — Check your tires frequently for wear and proper pressure. Both are important in preventing "hydroplaning" (loss of traction on a wet surface). In the winter, mount snow tires on all four wheels for the best handling.


Inspect your windshield wipers and washers frequently. Keep the wind- shield washer reservoir full of the proper fluid. Have the windshield wiper blades replaced if they start to streak the windshield or leave parts unwiped. Use the defrosters and air conditioning to keep the windows from fogging up on the inside (see page 78).


Watch road conditions carefully, they can change from moment to moment. Wet leaves can be as slip- pery as ice. "Clear" roads can have patches of ice. Driving conditions can be very hazardous when the outside temperature is near freezing. The road surface can become covered with areas of water puddles mixed with areas of ice, so your traction can change without warning.


Be careful when downshifting. If traction is low, you can lock up the drive wheels for a moment and cause a skid.


CONTINUED


Driving


Main MenuTable of Contentsst Driving in Bad Weather, Towing a Trailer


Towing a Trailer Your Honda is designed primarily to carry passengers and their cargo. You can use it to tow a trailer if you carefully observe some general rules.


Be very cautious when passing, or being passed by other vehicles. The spray from large vehicles reduces your visibility, and the wind buffeting can cause you to lose control.


Driving


The total weight of the trailer and everything loaded in it must not exceed 450 kg (1,000 Ibs).


The "tongue load" should never exceed 50 kg (110 Ibs). This is the amount of weight the trailer puts on the hitch when it is fully-loaded. As a rule of thumb, the tongue load should be 10% of the total trailer package. For example, if the trailer and its load weigh 225
kg (500 Ibs), the tongue load should be 22.5 kg (50 Ibs). Adjust the trailer's cargo to change the tongue load. Start by putting approximately 60% of the cargo toward the front and 40% toward the rear. Never load the trailer so the back is heavier than the front. This takes weight off your car's rear axle and reduces traction.


Main MenuTable of Contentsst The combined weight of the car, all passengers and their luggage, and tongue load must not exceed the Gross Vehicle Weight Rating. The GVWR is printed on the Certification label attached to the driver's doorjamb (see page 212).


The combined weight of the car, all passengers and their luggage, and tongue load also must not exceed the Gross Axle Weight Rating. The GAWR is also shown on the Certification label. It tells you the maximum load for the front and rear axles. It is possible that your towing package does not exceed the GVWR but does exceed the GAWR. Improper trailer loading, and/or too much luggage in the trunk can overload the rear axle. Redistribute the load and check the axle weights again.


Improperly loading your car and trailer can seriously affect its steering and braking performance, causing a crash in which you can be seriously injured.


Check the loading of your car and trailer carefully before starting to drive.


The best way to confirm that your total towing package is within these specifications is to get it weighed. Load the car and trailer as you normally would while towing, and take them to a public scale. Have them check the total weight and the weight at each axle, then compare them to the specifications.


Towing a Trailer


Trailer Hitches Your Honda dealer, or the Honda Customer Relations Zone Office, can give you advice on the proper hitch for your car. Never use a hitch that mounts only to the rear bumper. The bumper is not designed to handle that type of load. The hitch should bolt to the underbody of the car and distribute the load over a wide area. Always have a trailer hitch installed by a qualified technician.


NOTICE


A trailer hitch that is not adequate for the size of the trailer, or a hitch that is improperly installed, can cause damage to the underside of your car.


Driving


Main MenuTable of Contentsst Towing a Trailer


Mirrors Many states and provinces have laws requiring special outside mirrors when you are towing a trailer. Check the laws in your area. You may want to install mirrors, even if they are not required. Hook up the trailer and see how much it obscures your ability to see behind you with the standard mirrors. If you cannot see directly behind you, or have a large blind spot next to the trailer or the car, you should install mirrors intended for towing.


Driving


Connecting the Trailer Most trailers that have a gross weight of 450 kg (1,000 Ibs) do not have their own braking system. If you are thinking of getting a trailer that does have brakes, make sure they are electrically-operated. There are no provisions in your car to tap into its hydraulic braking system. Any attempt to attach the trailer's brakes to your car's hydraulic system, no matter how successful it may seem, will lower braking effectiveness and create a potential hazard.


Always use a safety chain when towing a trailer. Connect the safety chain securely at both ends. Make sure the chain crosses under the tongue so it will catch the trailer if it becomes unhitched. Leave enough slack in the chain so it can't bind in a sharp turn. Do not let it drag on the ground.


Before Starting Out As you are preparing to tow your trailer, do the following:


Measure the trailer's tongue load. You can do this with a bathroom scale. Verify that the hitch and safety chain are securely fastened. Check the condition and air pressure of all tires on the trailer and your car. Low tire pressure can seriously affect the handling. Also check the spare tire. With everything loaded and the trailer connected, check that the rear of the car is not sagging. If so, redistribute the load in the car. Check that all lights on the car are working properly.


Main MenuTable of Contentsst Towing Safety Your car will not stop as quickly with a trailer in tow. Leave extra distance between your car and other vehicles. Avoid braking or turning suddenly. This could cause the trailer to jackknife or possibly turn over.


Keep in mind that your total vehicle is now much longer. Leave more room when making turns. The trailer tracks a smaller arc than the car and can hit or run over something that the car misses. When passing another vehicle, make sure the trailer is clear before changing lanes.


The car/trailer combination is more affected by crosswinds and buffeting. When being passed by a large vehicle, keep a constant speed and steer straight ahead. If there is too much wind buffeting, slow down to get out of the other vehicle's air turbulence.


Towing a trailer puts an extra load on your car. You should have your car serviced according to the "Maintenance schedule under severe driving conditions" on page 133.


Towing a Trailer


This extra load is magnified when you are driving in hilly terrain. Watch the temperature gauge closely when climbing hills. If it gets near the hot area, turn off the air conditioning (if it is on). If this does not reduce the heat, it may be necessary to pull to the side of the road and wait for the engine to cool. If the automatic transmission shifts frequently between 3rd and 4th gears, put it in D3. This will help prevent the transmission from overheating. Help keep the brakes from overheating by shifting to a lower gear when going downhill. If you have to stop while going uphill, do not hold the car in place by pressing on the accelerator. This can cause the automatic transmission to overheat. Use the parking brake or footbrake.


CONTINUED


Driving


Main MenuTable of Contentsst Towing a Trailer


When parking your car and trailer, especially on a hill, be sure to follow all the normal precautions. Turn your front wheels into the curb, set the parking brake firmly, and put the transmission in 1st or Reverse (manual) or Park (automatic). In addition, place wheel chocks at each of the trailer's tires.


Backing up with a trailer is difficult and takes practice. Drive slowly, make small movements with the steering wheel, and have someone stand outside to guide you. Grip the steering wheel on the bottom (rather than the usual position near the top). Move your hand to the left to get the trailer to move to the left, and right to move the trailer right.


Driving


Main MenuTable of Contentsst This section explains why it is important to keep your car well maintained and to follow basic maintenance safety precautions.


This section also includes Maintenance Schedules for normal driving and severe driving conditions, a Maintenance Record, and instructions for simple maintenance tasks you may want to take care of yourself.


If you have the skills and tools required to perform more complex maintenance tasks on your Honda, you may want to purchase the Service Manual. See page 231 for information on how to obtain a copy, or see your Honda dealer.


Maintenance Safety....................... 128
Important Safety Precautions.. 129
Maintenance Schedule.................. 130
Maintenance Record..................... 134
Periodic Checks............................. 136
Fluid Locations............................... 137
Engine Oil....................................... 138
Checking Engine Oil................. 138
Adding......................................... 138
Recommended Oil..................... 139
Additives..................................... 140
Oil and Filter Changes.............. 141
Cooling System.............................. 144


Checking the Engine Coolant


Level........................................ 144
Adding Engine Coolant............. 144
Replacing Engine Coolant........ 146
Windshield Washers..................... 148
Transmission Oil............................ 149


Automatic


Transmission.......................... 149


5-speed Manual


Transmission.......................... 150
Brake and Clutch Fluid................. 151
Brake System............................. 151
Anti-lock Brake System............ 152


Maintenance


Clutch System............................ 153
Power Steering............................... 153
Air Cleaner..................................... 154
Fuel Filter....................................... 155
Spark Plugs..................................... 155
Replacement............................... 155
Specification............................... 157
Battery............................................ 157
Windshield Wipers........................ 160
Air Conditioning............................. 162
Drive Belts...................................... 163
Tires................................................ 163
Inflation....................................... 164
Inspection................................... 165
Maintenance............................... 165
Tire Rotation.............................. 166
Replacing Tires and Wheels.... 166
Wheels and Tires....................... 167
Winter Driving........................... 167
Snow Tires.............................. 168
Tire Chains............................. 168
Lights.............................................. 169
Replacing Bulbs......................... 169
Storing Your Car............................ 179


Maintenance


Main Menust Maintenance Safety


Regularly maintaining your car is the best way to protect your investment. Proper maintenance is essential to your safety and the safety of your passengers. It will also reward you with more economical, trouble-free driving and help reduce air pollution.


This section includes instructions for simple maintenance tasks, such as checking and adding oil. Any service items not detailed in this section should be performed by a Honda technician or other qualified mechanic.


Some of the most important safety precautions are given in the next page. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.


Improperly maintaining this car or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.


Always follow the inspection and maintenance recommendations and schedules in this owner's manual.


Maintenance


Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.


Always follow the procedures and precautions in this owner's manual.


Main MenuTable of Contentsst Important Safety Precautions Before you begin any maintenance, make sure your car is parked on level ground and that the parking brake is on. Also, be sure the engine is off. This will help to eliminate several potential hazards:


Carbon monoxide poisoning from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.


Burns from hot parts. Let the engine and exhaust system cool before touching any parts.


Injury from moving parts. Do not run the engine unless instructed to do so.


Read the instructions before you begin, and make sure you have the tools and skills required.


To reduce the possibility of fire or explosion, be careful when working around gasoline or batteries. Use a nonflammable solvent, not gasoline, to clean parts. Keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.


You should wear eye protection and protective clothing when working near the battery or when using compressed air.


Maintenance Safety


Maintenance


Main MenuTable of Contentsst Maintenance Schedule


The Maintenance Schedule specifies how often you should have your car serviced and what things need attention. It is essential that you have your car serviced as scheduled to retain its high level of safety, dependability, and emission control performance.


Maintenance


Which Schedule to Follow: Service your car according to the time and mileage periods on one of the Maintenance Schedules on pages 132 and 133. Select the schedule for "Severe Conditions" if most of your driving is done under one or more of the conditions listed on that page. Otherwise, follow the schedule for "Normal Conditions."


The services and time or distance intervals shown in the maintenance schedule assume you will use your car as normal transportation. You should:


Avoid exceeding your car's load limit. This puts excess stress on the engine, brakes, and many other parts of your car. The load limit is shown on the label on the driver's door jamb.


Operate your car on reasonable roads within the legal speed limit.


Drive your car regularly over a distance of several kilometers (miles).


Always use unleaded gasoline with the proper octane (see page 98).


Main MenuTable of Contentsst Your authorized Honda dealer knows your car best and can provide competent, efficient service. However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Keep all the receipts as proof of completion, and have the person who does the work fill out the Maintenance Record. Check your warranty booklet for more information.


We recommend the use of Genuine Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high- quality standards as the original components, so you can be confident of their perfomance and durability.


U.S. Cars: Maintenance, replacement or repair of emission control devices and systems may be done by any automotive repair establishment or individual using parts that are "certified" to EPA standards.


Maintenance Schedule


According to state and federal regulations, failure to perform maintenance on the items marked with an asterisk (*) will not void your emissions warranties. However, Honda recommends that all maintenance services be performed at the recommended time or mileage period to ensure long-term reliability.


Maintenance


Main MenuTable of Contentsst Maintenance Schedule (Normal Conditions)


Maintenance


Follow the Normal Maintenance Schedule if the severe driving conditions specified in the Severe Conditions Maintenance Schedule on the next page do not apply.


For Canadian Owners: This Maintenance Schedule outlines the minimum required maintenance that you should perform to ensure the trouble- free operation of your vehicle. Due to regional and climatic differences, some additional servicing may be required. Please consult your warranty handbook for a more detailed description.


Main MenuTable of Contentsst Maintenance Schedule (Severe Conditions)


Follow the Severe Maintenance Schedule if you drive your vehicle MAINLY under one or more of the following conditions:


Driving less than 8 km (5
miles) per trip or, in freezing temperatures, driving less than 16 km (10 miles) per trip. Driving in extremely hot [over 90°F (32°C)] conditions. Extensive idling or long periods of stop-and-go driving. Trailer towing, driving with a car-top carrier, or driving in mountainous conditions. Driving on muddy, dusty, or de-iced roads.


NOTE: If you only OCCASIONALLY drive under a "severe" condition, you should follow the Normal Conditions Maintenance Schedule on the previous page.


Maintenance


Main MenuTable of Contentsst Required Maintenance Record


Have your servicing dealer record all Required Maintenance below. Keep receipts for all work done on your car.


Maintenance


Main MenuTable of Contentsst Record additional maintenance for severe driving conditions or non-scheduled maintenance on this page (see page 133).


Non-Scheduled Maintenance Record


Maintenance


Main MenuTable of Contentsst Periodic Checks


You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the page given.


Maintenance


Engine oil level — Check every time you fill the fuel tank. See page 102.


Engine coolant level — Check the radiator reserve tank every time you fill the fuel tank. See page 103.


Windshield washer fluid — Check the level in the reservoir monthly. If weather conditions cause you to use the washers frequently, check the reservoir each time you stop for fuel. See page 148.


Automatic transmission — Check the fluid level monthly. See page 149.


Brakes, clutch and power steering — Check the fluid level monthly. See page 151.


Tires — Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 164.


Battery — Check its condition and the terminals for corrosion monthly. See page 157.


Air conditioning — Check its operation weekly. See page 162.


Lights — Check the operation of the headlights, parking lights, taillights, high-mount brake light, turn signals, brake lights, and license plate lights monthly. See page 169.


Main MenuTable of Contentsst ANTI-LOCK BRAKE RESERVOIR (Gray cap)


COOLANT RESERVOIR


AUTOMATIC TRANSMISSION FLUID DIPSTICK (Yellow loop)


Fluid Locations


BRAKE FLUID (Gray cap)


(5-M/T only) CLUTCH FLUID (Gray cap)


ENGINE OIL FILL CAP


POWER STEERING FLUID (Red cap)


WASHER FLUID (Blue cap)


ENGINE OIL DIPSTICK (Orange loop)


Maintenance


Main MenuTable of Contentsst Engine Oil


Checking Engine Oil


DIPSTICK


Adding


ENGINE OIL FILL CAP


UPPER MARK LOWER MARK


Check the engine oil a couple of minutes after shutting off the engine. This will allow the oil to drain down to the bottom of the engine. Make sure the car is parked on level ground.


3. Pull it out again and look at the oil level at the end of the dipstick. If it is between the upper and lower marks, the level is correct. Add oil if the level is at or below the lower mark.


To add oil, unscrew and remove the engine oil fill cap on top of the valve cover. Pour in the oil, and replace the engine oil fill cap. Tighten it securely. Wait a few minutes and recheck the oil level. Do not fill above the upper mark; you could damage the engine.


1. Pull out the dipstick (orange loop)


and wipe it with a cloth or paper towel.


2. Insert it all the way back in its tube.


Maintenance

Loading...
x