. 70
Windshield Wipers and Washers . 71
.........
. 72
Turn Signals and Headlights
. 74
Instrument Panel Brightness
........
. 74
Hazard Warning Button
.................
. 74
Rear Window Defogger
.................
. 75
Steering Wheel Adjustment
..........
...............................
Keys and Locks
. 76
. 77
Immobilizer System
........................
. 78
Ignition Switch
................................
. 79
......................................
Door Locks
......................
. 79
. 80
..............
. 81
............................................
. 83
.......................
.................................................
. 86
Tailgate Remote Transmitter Seats
Power Door Locks Childproof Door Locks
Power Windows Mirrors Parking Brake Interior Convenience Items
.............................. ............................................. ................................. ........... ....................... .................................... ........... ...................................... .................................
Beverage Holders Glove Box Accessory Power Socket Sun Visor
Interior Lights
. 94
. 95
. 96
. 97
. 98
. 98
. 99
. 99
. 99
57
2008 Fit 07/06/28 20:23:57 31SAA610 0063
Control Locations
INSTRUMENT PANEL INDICATORS (P.60) GAUGES
(P.67)
HAZARD WARNING BUTTON (P.74)
AUDIO SYSTEM (P.107)
MIRROR CONTROLS * (P.95)
POWER DOOR LOCK MASTER SWITCH * (P.79)
POWER WINDOW SWITCH (P.94)
HOOD RELEASE HANDLE (P.138)
* : If equipped
58
PASSENGER AIRBAG OFF INDICATOR (P.31)
ACCESSORY POWER SOCKET (P.99)
PARKING BRAKE (P.96)
HEATING/COOLING CONTROLS (P.102)
AUTOMATIC TRANSMISSION (P.157) MANUAL TRANSMISSION (P.155)
2008 Fit 07/06/28 20:24:05 31SAA610 0064
Instrument Panel
(P.62)
PARKING BRAKE AND BRAKE SYSTEM INDICATOR
(P.60, 232)
DOOR AND TAILGATE OPEN INDICATOR SECURITY SYSTEM INDICATOR
(P.66)
*
LOW TIRE PRESSURE INDICATOR (P.64)
*
HIGH BEAM INDICATOR
(P.65)
WASHER LEVEL INDICATOR (P.65)
*
MALFUNCTION INDICATOR LAMP
(P.231)
CHARGING SYSTEM INDICATOR
(P.60, 230)
LOW OIL PRESSURE INDICATOR (P.60, 230)
IMMOBILIZER SYSTEM INDICATOR (P.66)
*
: If equipped
LIGHTS ON INDICATOR (P.64)
FOG LIGHT INDICATOR (P.64)
*
SIDE AIRBAG OFF INDICATOR (P.31, 61)
DAYTIME RUNNING LIGHTS INDICATOR (P.65)
*
SEAT BELT REMINDER INDICATOR TPMS INDICATOR LOW FUEL INDICATOR
(P.62)
(P.64)
*
(P.18, 60)
HIGH TEMPERATURE INDICATOR (P.63) ELECTRIC POWER STEERING INDICATOR (P.62)
LOW TEMPERATURE INDICATOR (P.63)
*
CRUISE CONTROL INDICATOR (P.65) CRUISE MAIN INDICATOR (P.65)
*
MAINTENANCE MINDER INDICATOR (P.66)
SUPPLEMENTAL RESTRAINT SYSTEM INDICATOR (P.30, 61)
ANTI-LOCK BRAKE SYSTEM INDICATOR (P.62)
59
2008 Fit 07/06/28 20:24:15 31SAA610 0065
Instrument Panel Indicators
The instrument panel has many indicators that give you important information about your vehicle.
Malfunction Indicator
Lamp
231
See page
Low Oil Pressure Indicator
The engine can be severely damaged
if this indicator flashes or stays on
when the engine is running. For
more information, see page
230
Charging System Indicator
If this indicator comes on when the engine is running, the battery is not being charged. For more information, see page
230
60
Seat Belt Reminder Indicator
This indicator comes on when you turn the ignition switch to the ON (II) position. It reminds you and your passengers to fasten your seat belts. A beeper also sounds if you have not fastened your seat belt.
If you turn the ignition switch to the ON (II) position before fastening your seat belts, the beeper sounds, and the indicator flashes. If you do not fasten your seat belts before the beeper stops, the indicator stops flashing but remains on.
U.S.
Canada
Parking Brake and Brake System Indicator (Red) This indicator has two functions:
1.
2.
It comes on when you turn the ignition switch to the ON (II) position. It is a reminder to check the parking brake. A beeper sounds if you drive with the parking brake not fully released. Driving with the parking brake not fully released can damage the brakes and tires.
If it remains on after you have fully released the parking brake while the engine is running, or if it comes on while driving, there could be a problem with the brake system. For more information, see page
232
2008 Fit 07/06/28 20:24:23 31SAA610 0066
Instrument Panel Indicators
If your front passenger does not fasten their seat belt, the indicator comes on about 6 seconds after the ignition switch is turned to the ON (II) position.
If either of you do not fasten your seat belt while driving, the beeper will sound and the indicator will flash again at regular intervals. For more information, see page
18
Supplemental Restraint System Indicator
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
side airbags, passenger’s side airbag
cutoff system, side curtain airbags,
automatic seat belt tensioners,
driver’s seat position sensor, or the
front passenger’s weight sensors.
30
For more information, see page
U.S.
Canada
Side Airbag Off Indicator
This indicator comes on briefly when you turn the ignition switch to the ON (II) position. If it comes on at any other time, it indicates that the passenger’s side airbag has automatically shut off. For more information, see page
31
61
2008 Fit 07/06/28 20:24:32 31SAA610 0067
Instrument Panel Indicators
Anti-lock Brake System (ABS) Indicator
This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position, and when the ignition switch is turned to the START (III) position. If it comes on at any other time, there is a problem with the ABS. If this happens, have your vehicle checked at a dealer. With this indicator on, your vehicle still has normal braking ability but no anti-lock function. For more information, see page
168
Electric Power Steering (EPS) Indicator
This indicator normally comes on when you turn the ignition to the ON (II) position and goes off after the engine starts. If it comes on at any other time, there is a problem in the electric power steering system. If this happens, stop the vehicle in a safe place and turn off the engine. Reset the system by restarting the engine. The indicator will not turn off immediately. If it does not go off after driving a short distance, or comes on again while driving, take the vehicle to your dealer to have it checked. With the indicator on, the EPS may be turned off, making the vehicle harder to steer.
If the power steering system overheats while driving, the assist is reduced and steering may feel slightly harder.
Driving with the power steering system continuously overheating can cause system damage.
Low Fuel Indicator
This indicator comes on as a reminder that you must refuel soon.
When the indicator comes on, there is about 1.7 US gal (6.3 ) of fuel remaining in the tank before the needle reaches E. There is a small reserve of fuel remaining in the tank when the needle does reach E.
Door and Tailgate Open Indicator
This indicator comes on if any door or the tailgate is not closed tightly.
62
2008 Fit 07/06/28 20:24:40 31SAA610 0068
Instrument Panel Indicators
High Temperature Indicator
This indicator monitors the temperature of the engine coolant. It normally comes on when you turn the ignition switch to the ON (II) position and goes off after a few seconds. In normal driving conditions, this indicator should not blink or stay on. In severe driving conditions, such as very hot weather or a long period of uphill driving, this indicator may blink. This means the engine coolant temperature is high. If the indicator begins to blink while you are driving, be sure to slow down to prevent overheating. If the indicator stays on, pull safely to the side of the road and turn off the engine. See page and precautions on checking the engine’s cooling system. Do not drive the vehicle while the indicator is on or the engine may be damaged.
for instructions
228
Low Temperature Indicator
This indicator monitors the temperature of the engine coolant. If there is no problem, this indicator comes on when the engine is cold. If it comes on when the engine is warm (normal operating temperature), have the vehicle inspected by your dealer as soon as possible.
Turn Signal and Hazard Warning Indicators
The left or right turn signal indicator blinks when you signal a lane change or turn. If an indicator does not blink or blinks rapidly, it usually means one of the turn signal bulbs is burned out (see page the bulb as soon as possible, since other drivers cannot see that you are signaling.
). Replace
198
When you press the hazard warning button, both turn signal indicators and all turn signals on the outside of the vehicle flash.
63
2008 Fit 07/06/28 20:24:49 31SAA610 0069
Tire Pressure Monitoring System (TPMS) Indicator
U.S.modelsonly This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position.
If this indicator comes on and stays on at any other time, or if it does not come on when you turn the ignition switch to the ON (II) position, there is a problem with the TPMS. With this indicator on, the low tire pressure indicator will not come on when a tire loses pressure. Take the vehicle to your dealer to have the system checked.
Instrument Panel Indicators
Low Tire Pressure Indicator
U.S.modelsonly This indicator normally comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it comes on while driving, it indicates that one or more of your vehicle’s tires are significantly low on pressure.
If this happens, pull to the side of the road when it is safe, check which tire has lost the pressure, and determine the cause. If it is because of a flat tire, replace the flat tire with the compact spare (see page ), and have the flat tire repaired as soon as possible. If two or more tires are underinflated, call a professional towing service (see page information, see page
). For more
170
218
238
64
Lights On Indicator
or
This indicator reminds you that the exterior lights are on. It comes on when the light switch is in either the position. If you turn the
ignition switch to the ACCESSORY (I) or LOCK (0) position without turning off the light switch, this indicator will stay on. A reminder chime will also sound when you open the driver’s door.
Fog Light Indicator
OnSportmodel This indicator comes on when you turn on the fog lights. For more information, see page
73
2008 Fit 07/06/28 20:25:00 31SAA610 0070
High Beam Indicator
Cruise Main Indicator
Washer Level Indicator
Instrument Panel Indicators
This indicator comes on with the high beam headlights. For more information, see page
73
On Canadian models, this indicator comes on with reduced brightness when the daytime running lights (DRL) are on (see page
73
).
Daytime Running Lights Indicator Canadianmodelsonly If this indicator comes on when the ignition switch is turned to the ON (II) position and the parking brake is released, it means there is a problem in the circuit. Have your vehicle checked by your dealer.
OnSportmodelandCanadianLXmodel This indicator comes on when you turn on the cruise control system by pressing the CRUISE button (see page
131
).
Canadianmodelsonly This indicator comes on when the washer fluid level is low. Add washer fluid when you see this indicator come on (see page
192
).
Cruise Control Indicator
OnSportmodelandCanadianLXmodel
This indicator comes on when you
set the cruise control. See page
131
cruise control.
for information on operating the
65
2008 Fit 07/06/28 20:25:09 31SAA610 0071
Instrument Panel Indicators
Security System Indicator
SECURITY SYSTEM INDICATOR
Immobilizer System Indicator
This indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. It will go off if you have inserted a properly-coded ignition key. If it is not a properly-coded key, the indicator will blink and the engine will not start (see page
77
).
This indicator also blinks several times when you turn the ignition switch from the ON (II) position to the ACCESSORY (I) or LOCK (0) position.
OnSportmodel
This indicator comes on when the
security system is set. See page
130
for more information on the
security system.
Maintenance Minder Indicator
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It
reminds you that it is time to take
your vehicle in for scheduled
maintenance. The maintenance main
items and sub items will be displayed
in the information display. See page
179
maintenance minder.
for more information on the
This indicator goes off when your dealer resets it after completing the required maintenance service.
66
2008 Fit 07/06/28 20:25:17 31SAA610 0072
TACHOMETER
SPEEDOMETER
SELECT/RESET KNOB
FUEL GAUGE
TRIP METER
INFORMATION DISPLAY
ODOMETER
U.S. model is shown.
Gauges
Trip Meter This meter shows the number of miles (U.S.) or kilometers (Canada) driven since you last reset it.
There are two trip meters: Trip A and Trip B. Switch between these displays by pressing the select/reset knob repeatedly.
Each trip meter works independently, so you can keep track of two different distances.
When you turn the ignition switch to the ON (II) position, the last selection is displayed.
To reset a trip meter, display it, and then press and hold the select/reset knob until the number resets to ‘‘0.0’’.
67
2008 Fit 07/06/28 20:25:24 31SAA610 0073
Gauges
Odometer The odometer shows the total distance your vehicle has been driven. It measures miles in U.S. models and kilometers in Canadian models. It is illegal under U.S. federal law and Canadian provincial regulations to disconnect, reset, or alter the odometer with the intent to change the number of miles or kilometers indicated.
Fuel Gauge This shows how much fuel you have. It may show slightly more or less than the actual amount. The needle returns to the bottom after you turn off the ignition.
Avoid driving with an extremely low f uel level. Running out of f uel could cause the engine to misf ire, damaging the catalytic converter.
68
Check Fuel Cap Indicator If your fuel fill cap is loose or missing, a ‘‘CHECK FUEL CAP’’ message appears as text on the information display after you start the engine. The message appears from CHECK to FUEL, then to CAP repeatedly.
Turn the engine off and confirm the fuel fill cap is installed. If it is, loosen the cap, then retighten it until it clicks at least once. You can cycle the message off of the display by pressing the select/reset knob repeatedly, but this message will be displayed each time the engine is started. It will take several days of normal driving for the vehicle to turn the warning off.
If the system still detects a loose or missing fuel fill cap, the malfunction indicator lamp (MIL) comes on. Turn the engine off, and check or retighten the fuel fill cap until it clicks at least once. The MIL goes out after several days of normal driving once the cap is tightened or replaced. If it does not go out, have your dealer inspect the vehicle. For more information, see page
231
2008 Fit 07/06/28 20:25:28 31SAA610 0074
Maintenance Minder The information display in the instrument panel shows you the engine oil life and maintenance service items when the ignition switch is in the ON (II) position. This information helps to keep you aware of the periodic maintenance your vehicle needs for continued trouble- free driving. Refer to page more information.
179
for
Gauges
69
2008 Fit 07/06/28 20:25:35 31SAA610 0075
Controls Near the Steering Wheel
PADDLE SHIFTER (DOWNSHIFT) * (P.162)
INSTRUMENT PANEL BRIGHTNESS (P.74)
HEADLIGHTS/TURN SIGNAL/ FOG LIGHTS * (P.72)
MIRROR CONTROLS * (P.95)
HOOD RELEASE HANDLE (P.138)
HORN *
PADDLE SHIFTER (UPSHIFT) * (P.162)
HAZARD WARNING BUTTON (P.74)
WINDSHIELD WIPERS/WASHERS (P.71)
REAR WINDOW DEFOGGER (P.74)
PASSENGER AIRBAG OFF INDICATOR (P.31)
ACCESSORY POWER SOCKET (P.99)
STEERING WHEEL ADJUSTMENT (P.75)
CRUISE CONTROL BUTTONS * (P.131)
AUXILIARY INPUT JACK * (P.127)
To use the horn, press the center pad of the steering wheel. If equipped.
1: 2 :
*
*
70
2008 Fit 07/06/28 20:25:46 31SAA610 0076
Windshield Wipers and Washers
Windshield Wiper
MIST The wipers run at high speed until you release the lever.
−
OFF
−
The wipers are not activated.
Rear Window Wiper and Washer
−
INT few seconds.
The wipers operate every
LO
−
The wipers run at low speed.
HI
−
The wipers run at high speed.
−
Windshield Washers
Pull the wiper control lever toward you, and hold it. The washers spray until you release the lever. The wipers run at low speed, then complete one more sweep after you release the lever.
1. 2. 3. 4. 5. 6.
MIST OFF INT LO Low speed HI High speed Windshield washers
Intermittent
− − −
Push the right lever up or down to select a position.
1.
OFF When you turn the wiper switch to the ‘‘OFF’’ position, the wiper will return to its parked position.
2.
Rotate the switch clockwise to turn the rear window wiper ON.
CONTINUED
71
2008 Fit 07/06/28 20:25:53 31SAA610 0077
Windshield Wipers and Washers, Turn Signal and Headlights
3.
4.
Hold past ON to turn the rear window wiper on and to spray the rear window washer.
Rotate the switch counterclockwise to spray the window washer.
The rear window washer uses the same fluid reservoir as the wind- shield washer.
Turn Signal and Headlights
−
Turn Signal Push down on the left lever to signal a left turn and up to signal a right turn. To signal a lane change, push lightly on the lever and hold it. The lever will return to the center when you release it or complete a turn.
Turn signal Off Parking and interior lights Headlights High beams Flash high beams
1. 2. 3. 4. 5. 6. OnSportmodel Fog lights off 7. Fog lights on 8.
72
2008 Fit 07/06/28 20:26:02 31SAA610 0078
−
Turning the switch to
’’ position turns on the
Headlights the ‘‘ parking lights, taillights, instrument panel lights, side-marker lights, and rear license plate lights.
Turning the switch to the ‘‘ position turns on the headlights.
’’
’’ or ‘‘
When the light switch is in the ‘‘ ’’ position, the lights on indicator comes on as a reminder. This indicator stays on if you leave the light switch on and turn the ignition switch to the ACCESSORY (I) or the LOCK (0) position.
If you leave the lights on with the key removed from the ignition switch, you will hear a reminder chime when you open the driver’s door.
−
Push the lever
High Beams forward and the high beam indicator will come on (see page back to return to low beams.
). Pull it
65
To flash the high beams, pull the lever back lightly, then release it. The high beams will stay on as long as you hold the lever back.
Fog Lights OnSportmodel Turn the fog lights on and off by turning the switch next to the headlight switch.
You can use the fog lights only when the headlights are on low beam. They will go off when the headlights are turned off.
Headlights
position, the high beam
Daytime Running Lights Canadianmodelsonly With the headlight switch off or in the headlights and the high beam indicator come on with reduced brightness when you turn the ignition switch to the ON (II) position and release the parking brake. They remain on until you turn the ignition switch off, even if you set the parking brake.
The headlights revert to normal operation when you turn them on with the switch.
73
2008 Fit 07/06/28 20:26:10 31SAA610 0079
Instrument Panel Brightness, Hazard Warning Button, Rear Window Defogger
Instrument Panel Brightness
Hazard Warning Button
Rear Window Defogger
INSTRUMENT PANEL BRIGHTNESS CONTROL KNOB
You can change the instrument panel brightness only when the light switch is on. Turn the knob on the upper part of the instrument panel to adjust the brightness.
You will hear a beep when maximum or minimum brightness is reached. You will also hear a beep when the maximum level is canceled by turning the knob a click to the left.
74
Push the button to turn on the hazard warning lights (four-way flashers). This causes all four outside turn signals and both turn indicators in the instrument panel to flash. Use the hazard warning lights if you need to park in a dangerous area near heavy traffic, or if your vehicle is disabled.
The rear window defogger will clear fog, frost, and thin ice from the window. Push the defogger button to turn it on and off. The indicator in the button comes on to show the defogger is on. You must manually shut off the rear window defogger when it is no longer needed.
2008 Fit 07/06/28 20:26:19 31SAA610 0080
Rear Window Defogger, Steering Wheel Adjustment
Make sure the rear window is clear and you have good visibility before starting to drive.
Steering Wheel Adjustment Make any steering wheel adjustment before you start driving.
The defogger wires on the inside of the rear window can be accidentally damaged. When cleaning the glass, always wipe side-to-side.
Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.
Adjust the steering wheel only when the vehicle is stopped.
1.
Push the lever under the steering column all the way down.
2.
Move the steering wheel so it points toward your chest, not toward your face. Make sure you can see the instrument panel gauges and indicators.
3.
Push the lever up to lock the steering wheel in position.
4.
Make sure you have securely locked the steering wheel in place by trying to move it up and down.
75
2008 Fit 07/06/28 20:26:27 31SAA610 0081
Keys and Locks
OnSportmodel
AllmodelsexceptSport
KEY NUMBER TAG
KEYS WITH TRANSMITTER
KEY NUMBER TAG
KEYS
Your vehicle comes with the two ignition keys.
76
You should have received a key number tag with your keys. You will need this key number if you ever have to get a lost key replaced. Use only Honda-approved key blanks.
These keys contain electronic circuits that are activated by the immobilizer system. They will not work to start the engine if the circuits are damaged.
Protect the keys from direct sunlight, high temperature, and high humidity.
Do not drop the keys or set heavy objects on them.
Keep the keys away from liquids. If they get wet, dry them immediately with a soft cloth.
AllmodelsexceptSport The keys do not contain batteries. Do not try to take them apart.
2008 Fit 07/06/28 20:26:35 31SAA610 0082
If the system repeatedly does not recognize the coding of your key, contact your dealer.
Do not attempt to alter this system or add other devices to it. Electrical problems could result that may make your vehicle undrivable.
If you have lost your key and cannot start the engine, contact your dealer.
Always take the ignition key with you whenever you leave the vehicle alone.
The immobilizer system protects your vehicle from theft. If an improperly-coded key (or other device) is used, the engine’s fuel system is disabled.
When you turn the ignition switch to the ON (II) position, the immobilizer system indicator should come on for a few seconds, then go off. If the indicator starts to blink, it means the system does not recognize the coding of the key. Turn the ignition switch to the LOCK (0) position, remove the key, reinsert it, and turn the ignition switch to the ON (II) position again.
The system may not recognize your key’s coding if another immobilizer key or other metal object (i.e. key fob) is near the ignition switch when you insert the key.
Immobilizer System
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.
77
2008 Fit 07/06/28 20:26:43 31SAA610 0083
Ignition Switch
If the front wheels are turned, the anti-theft lock may make it difficult to turn the key. Firmly turn the steering wheel to the left or right as you turn the key.
You will hear a reminder beeper if you leave the key in the LOCK (0) or the ACCESSORY (I) position and open the driver’s door. Remove the key to turn off the beeper.
−
You can
ACCESSORY (I) operate the audio system and the accessory power socket in this position.
−
This is the normal key
ON (II) position when driving. Several of the indicators on the instrument panel come on as a test when you turn the ignition switch from the ACCESSORY (I) to the ON (II) position.
−
Use this position
START (III) only to start the engine. The switch returns to the ON (II) position when you let go of the key.
The ignition switch has four positions: LOCK (0), ACCESSORY (I), ON (II), and START (III).
−
You can insert or
LOCK (0) remove the key only in this position. To turn the key, push it in slightly. If your vehicle has an automatic transmission, the shift lever must also be in park.
78
If your vehicle has an automatic transmission, the shift lever must be in Park before you can remove the key from the ignition switch.
Removing the key from the ignition switch while driving locks the steering. This can cause you to lose control of the vehicle.
Remove the key from the ignition switch only when parked.
2008 Fit 07/06/28 20:26:51 31SAA610 0084
TAB
UNLOCK
LOCK
Each door has a lock tab on the top of the door. Push in the tab to lock the door, and pull it out to unlock.
AllmodelsexceptSport Each front door can be locked or unlocked with the ignition key.
OnCanadianDXmodel To lock the passenger’s door when getting out of the vehicle, push in the lock tab and close the door. To lock the driver’s door, pull and hold the outside door handle, then push in the lock tab. Release the handle, then close the door.
Door Locks
Power Door Locks
MASTER DOOR LOCK SWITCH
AllmodelsexceptCanadianDX To lock the doors and the tailgate, push the top of the master door lock switch on the driver’s door, push in the lock tab on the driver’s door, or use the key in the outside door lock on the driver’s door.
Pushing the bottom of the master door lock switch unlocks all doors and the tailgate.
CONTINUED
79
2008 Fit 07/06/28 20:26:58 31SAA610 0085
Door Locks
The lock tab on each passenger’s door locks and unlocks only that door. Pulling up the driver’s lock tab only unlocks the driver’s door. To unlock only the driver’s door from the outside, turn the key and release it. If you turn it again, the remaining doors and the tailgate unlock.
To lock a passenger’s door when getting out of the vehicle, push in the lock tab and close the door. To lock the driver’s door, remove key from ignition switch and push in the lock tab or push the top of the master door lock switch, then close the door.
80
LockoutPrevention With the driver’s door open and the key in the ignition switch, the master door lock switch is disabled. It is not disabled if the driver’s door is closed. If you try to lock the open driver’s door with the key in the ignition switch by pushing in the lock tab, the tabs on all doors pop up when you close the door.
Childproof Door Locks
LEVER
Unlock
Lock
The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear doors. Each rear door has a lock lever near the edge. With the lever in the LOCK position, the door cannot be opened from inside regardless of the position of the lock tab. To open the door, pull the lock tab up, and use the outside door handle.
2008 Fit 07/06/28 20:27:04 31SAA610 0086
AllmodelsexceptCanadianDX The tailgate will lock or unlock when you lock or unlock the driver’s door by using the key, the lock tab on the driver’s door, the master door lock switch or the remote transmitter (if equipped).
UNLOCK
LOCK
Tailgate
HANDLE
KEY
AllmodelsexceptSport You can lock or unlock the tailgate with the key.
To open the tailgate, pull the handle, then lift up.
CONTINUED
81
2008 Fit 07/06/28 20:27:12 31SAA610 0087
Tailgate
Unlocking the Tailgate
Lock
Unlock
OnSportmodel If the power door lock system cannot unlock the tailgate, unlock it manually.
Place a cloth on the edge of the cover, then use a small flat-tipped screwdriver to remove the cover on the back of the tailgate.
Push the release lever to the right as shown.
If you need to unlock the tailgate manually, it means there is a problem with the tailgate. Have the vehicle checked by your dealer.
TAILGATE HANDLE
To close the tailgate, hold the tailgate handle, lower the tailgate, then press down on the back edge.
Keep the tailgate closed at all times
while driving to avoid damaging the
tailgate and to prevent exhaust gas
from getting into the interior. See
Carbon Monoxide Hazard
53
on page
82
2008 Fit 07/06/28 20:27:19 31SAA610 0088
Remote Transmitter
LED
UNLOCK BUTTON
LOCK BUTTON
PANIC BUTTON
−
OnSportmodel
LOCK
Press this button once to
lock all doors and the tailgate. Some
exterior lights will flash once. When
you push LOCK twice within 5
seconds, the horn will sound to
verify that the doors and the tailgate
are locked and the security system
has set. You cannot lock the doors
and the tailgate if any door or the
tailgate is not fully closed or the key
is in the ignition switch.
−
Press this button once
UNLOCK to unlock the driver’s door. Push it twice to unlock the remaining doors and the tailgate. Some exterior lights will flash twice each time you press the button.
The ceiling light (if the ceiling light switch is in the door activated position) will come on when you press the UNLOCK button. If you do not open any door or the tailgate within 30 seconds, the light fades out. If you relock the doors and the tailgate with the remote transmitter before 30 seconds have elapsed, the light will go off immediately.
If you do not open any door or the tailgate within 30 seconds, they will automatically relock and the security system will set.
−
Press this button for
PANIC about 2 seconds to attract attention: the horn will sound, and the exterior lights will flash for about 30 seconds. To cancel panic mode, press any other button on the remote transmitter, or turn the ignition switch to the ON (II) position.
CONTINUED
83
2008 Fit 07/06/28 20:27:27 31SAA610 0089
Remote Transmitter
RemoteTransmitterCare
Avoid dropping or throwing the transmitter.
Protect the transmitter from extreme temperature.
Do not immerse the transmitter in any liquid.
If you lose a transmitter, the replacement needs to be reprogrammed by your dealer.
Replacing the Transmitter
Battery
If it takes several pushes on the
button to lock or unlock the doors
and the tailgate, replace the battery
as soon as possible.
Battery type: CR1616
SCREW
To replace the battery:
1.
Remove the screw at the base of the transmitter with a small Phillips-head screwdriver.
84
2008 Fit 07/06/28 20:27:35 31SAA610 0090
4.
Remove the old battery, and insert a new battery into the back of the cover with the
side facing down.
+
BATTERY
An improperly disposed of battery can hurt the environment. Always confirm local regulations for battery disposal.
5.
Install the parts in reverse order.
TAB
2.
3.
Separate the transmitter by prying its middle seam with your fingernail.
Inside the transmitter, separate the inner cover from the keypad by releasing the two tabs on the cover.
Remote Transmitter
AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.
Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.
ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.
85
2008 Fit 07/06/28 20:27:42 31SAA610 0091
Seats
−
11 13
Front Seat Adjustments Seepages forimportantsafety informationandwarningsabouthowto properlypositiontheseatsandseat- backs.
Make all seat adjustments before you start driving.
86
To adjust the seat forward and backward, pull up on the lever under the seat cushion’s front edge. Move the seat to the desired position, and release the lever. Try to move the seat to make sure it is locked in position.
LEVER
The seat can also be adjusted forward and backward using the lever on the side of the seat-back. Pull out the lever and push it forward, holding the seat-back with your hand. Move the seat to the desired position, and check the seat to make sure it is locked in position.
2008 Fit 07/06/28 20:27:50 31SAA610 0092
Rear Seat Adjustments
To change the seat-back angle of the front seat, pull up the lever on the outside of the seat bottom.
Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.
LEVER
You can adjust the angle of the rear seat-backs separately. To change the seat-back angle, pull up the release lever on the outer side of the seat- back.
Seats
Head Restraints Seepage forimportantsafety informationandawarningabout improperlypositioningheadrestraints.
13
Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from whiplash and other injuries.
CONTINUED
87
2008 Fit 07/06/28 20:27:55 31SAA610 0093
Seats
RELEASE BUTTON
The head restraints in the rear outer seating positions do not adjust for height. To remove one for cleaning or repair, push the release button, and lift the restraint up.
They are most effective when you adjust them so the center of the back of the occupant’s head rests against the center of the restraint.
FRONT
The front head restraints adjust for height. You need both hands to adjust a restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button sideways, and push the restraint down.
Failure to reinstall the head restraints can result in severe injury during a crash.
Always replace the head restraints before driving.
88
2008 Fit 07/06/28 20:28:03 31SAA610 0094
Reclining the Front Seats
Seats
SEAT-BACK ANGLE ADJUSTMENT LEVER
SLIDE LEVER
You can recline the seat-backs on the front seats so they are level with the rear seat cushions, making a large cushioned area. To do this:
2.
1.
Recline the rear seat-backs as far
backward as possible (see page
87
).
Remove the front head restraints (see page securely.
), and store them
88
CONTINUED
89
REAR CENTER
RELEASE BUTTON
When a passenger is seated in the rear center seating position, make sure the center head restraint is properly positioned.
Make sure the head restraint locks in position when you reinstall it.
2008 Fit 07/06/28 20:28:11 31SAA610 0095
Folding the Rear Seat Up The left and right rear seat cushions can be lifted up separately to make room for cargo.
Remove any items from the seat before you fold up the seat cushion.
Pull up the rear seat cushion, and fold the seat leg down. Push the seat cushion firmly against the seat-back to lock it.
Seats
3.
4.
Using the slide lever, move the front seat cushions as far forward as possible.
Pull up the seat-back angle adjustment lever, and pivot the seat-back backward until it is level with the rear seat cushion.
Reverse this procedure to return the front seats to the upright position.
When you return the seat-back to its upright position, hold the seat-back to keep it from going up too quickly.
Make sure you install the head restraints and securely lock the seats before driving.
90
2008 Fit 07/06/28 20:28:20 31SAA610 0096
Folding the Rear Seat Down The rear seat-backs can be folded down for more cargo room.
Each side folds down separately, so you can still carry a passenger in the rear outer seating position.
Remove any items from the seat before folding down the seat-back.
Make sure there are no items on the floor before folding down the seats.
LEG
FLOOR GUIDE
LATCH
To return the seat cushion to its original position, first make sure