Download PDF Manual


21


ba8_E9091_cic.book Seite 22 Mittwoch, 29. Oktober 2008 2:59 14


Voice activation system


The concept The voice activation system allows you to con- trol operation of various vehicle systems with- out removing your hands from the steering wheel. Individual menu items on the Control Display can be spoken as commands. It is not neces- sary to use the controller. The voice activation system transforms your oral commands into control signals for the selected systems and provides support in the form of instructions or questions. The voice activation system uses a special microphone located in the area of the interior rearview mirror, refer to page 14.


Precondition Via iDrive, select the language in which the voice activation system is operating, so that the spoken commands can be identified. Selecting the language for iDrive, refer to page 78.


Symbols in the Owner's Manual


{...} Say the specified commands word for word. {{...}} Indicates responses of the voice acti- vation system.


Saying commands


Activating voice activation system 1. Press the


button on the steering wheel.


This symbol on the Control Display and an acoustic signal indicate that the voice activation system is ready to receive spo- ken commands.


2. Say the command.


The command appears on the Control Dis- play.


This symbol appears on the Control Display


when you can enter additional commands. If no further commands are possible, continue by operating the item of equipment via iDrive.


Terminating or canceling voice activation system Press the or


button on the steering wheel


{Cancel}


In dialogs that call for a text of your choice, the procedure can only be canceled using the but- ton on the steering wheel.


Possible commands The commands available in each case depend on the menu item selected on the Control Dis- play. To have the available commands read aloud:


{Voice commands}


For example, if "CD/DVD" is selected, the com- mands for operating CD/Multimedia are read aloud .


22


ba8_E9091_cic.book Seite 23 Mittwoch, 29. Oktober 2008 2:59 14


Using alternative commands There are often a number of commands to run a function, e.g.:


{Radio on} or {Radio}


Calling up functions immediately via short commands Short commands enable you to perform certain functions immediately, irrespective of which menu item is selected, refer to page 243.


Example: selecting the track of a CD 1.


If necessary, switch on entertainment audio output.


2. Press the


button on the steering wheel.


3. Select the music track, e.g.:


{CD track 4} System says: {{Track 4}}


Setting the voice dialog You can set whether the system should use the standard dialog or a shorter variant. In the shorter variant of the voice dialog, the prompts and responses from the system are abbrevi- ated. 1. "Settings" 2. "Language/Units" 3. "Speech mode:"


Notes


For information on voice control of the telephone, refer to page 175.<


For voice commands, bear in mind the follow- ing: > Do not use the voice activation system to


initiate an Emergency Request. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a telephone connection.


> Pronounce the commands and digits


smoothly and at normal volume, avoiding excessive emphases and pauses. This also applies when spelling out and saying a full word during destination entry.


> When selecting a radio station, use the


standard pronunciation of the station name.


> For entries in the voice-activated phone


book, only use names in the language of the voice activation system and no abbrevia- tions.


> Keep the doors, windows and glass roof/


panorama glass roof closed to prevent interference from outside noise.


> Avoid ambient noise in the vehicle while


speaking.


4. To select the setting:


> "Default" > "Short"


23


ba8_E9091_cic.book Seite 24 Mittwoch, 29. Oktober 2008 2:59 14


ba8_E9091_cic.book Seite 25 Mittwoch, 29. Oktober 2008 2:59 14


Controls Controls


This chapter is intended to provide you with information for complete control of your vehicle. All features and accessories that are useful for driving and your safety, comfort and convenience, are described here.


ba8_E9091_cic.book Seite 26 Mittwoch, 29. Oktober 2008 2:59 14


Opening and closing


Remote control


Each remote control contains a rechargeable battery that is automatically recharged when it is in the ignition lock while the car is being driven. Use each remote control at least twice a year for longer road trips in order to maintain the batteries' charge status. In cars with convenient access*, the remote control contains a replace- able battery, refer to page 35. The settings called up and implemented when the car is unlocked depend on which remote control is used to unlock the car, refer to Per- sonal Profile, next column. In addition, information about service require- ments is stored in the remote control, refer to Service data in the remote control, page 216.


Integrated key


Press button 1 to release the key. The integrated key fits the following locks: > Glove compartment, refer to page 102
> Driver's door, refer to page 29


26


New remote controls Your BMW center can supply new remote con- trols with integrated keys as additional units or as replacements in the event of loss.


Personal Profile


The concept You can set many of your BMW's functions to suit your personal needs and preferences. Without any action on your part, Personal Pro- file ensures that most of these settings are stored for the remote control currently in use. When you unlock the car, the remote control used for the purpose is recognized and the set- tings stored for it are called up and imple- mented. This means that your personal settings will be activated for you, even if in the meantime your car was used by someone else with another remote control and the corresponding settings. The individual settings are stored for a maxi- mum of four remote controls. They are stored for two remote controls if convenient access* is in use.


Personal Profile settings For more information on specific settings, refer to the specified pages. > Assignment of programmable memory


keys, refer to page 20


> Response of the central locking system


when the car is unlocked, refer to page 27
> Automatic locking of the vehicle, refer to


page 30


> Automatic call-up* of the driver's seat posi-


tion after unlocking, refer to page 45
> Triple turn signal activation, refer to


page 58


ba8_E9091_cic.book Seite 27 Mittwoch, 29. Oktober 2008 2:59 14


> Settings for the display on the Control Dis-


play and in the instrument cluster: > 12h/24h format of the clock, refer to


page 74


> Date format, refer to page 75
> Brightness of Control Display, refer to


page 78


> Language on the Control Display, refer


to page 78


> Units of measure, refer to page 71


> Show visual warning for Park Distance Con-


trol PDC*, refer to page 80


> Light settings:


> Welcome lamps, refer to page 90
> Pathway lighting, refer to page 91
> Daytime running lamps, refer to page 91
> Automatic climate control: activating/deac-


tivating AUTO program, cooling function and automatic recirculated-air control, set- ting temperature, air flow rate and distribu- tion, refer to page 95 ff


> Entertainment:


> Audio volume, refer to page 142
> Tone control, refer to page 142
> Speed-dependent volume control, refer


to page 143


Central locking system


The concept The central locking system functions when the driver's door is closed. The system simultaneously engages and releases the locks on the following: > Doors > Luggage compartment lid/tailgate > Fuel filler door


Operating from outside > Via the remote control > Via the door lock*


> In cars with convenient access*, via the handles on the driver's and front passen- ger's doors


In addition, if the remote control is used, the interior lamps and the door's courtesy lamps* are also switched on or off. The alarm system* is also armed or disarmed. For further details of the alarm system, refer to page 33.


Operating from inside By means of the button for central locking, refer to page 30. In the event of a sufficiently severe accident, the central locking system unlocks automatically. In addition, the hazard warning flashers and inte- rior lamps come on.


Opening and closing: Using the remote control


Persons or animals in a parked vehicle could lock the doors from the inside. You


should therefore take the remote control with you when you leave the vehicle so that the latter can be opened from outside.<


Unlocking Press the The interior lamps, the courtesy lamps* and the welcome lamps come on.


button.


Setting unlocking characteristics You can set whether only the driver's door or the entire vehicle is to be unlocked when the button is pressed for the first time. iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Door locks"


27


ba8_E9091_cic.book Seite 28 Mittwoch, 29. Oktober 2008 2:59 14


3. "Unlock button"


4. Select a menu item:


> "All doors" Press the entire vehicle.


button once to unlock the


> "Driver's door only"


button once unlocks


Pressing the the driver's door and fuel filler door. Press the button twice to unlock the entire vehicle.


> "Comfort opening", refer to page 28


5. Press the controller.


Convenient opening Hold the button down. The windows and the glass roof*/panorama glass roof* are opened.


Locking Press the


button.


Switching on interior lamps While the car is locked: Press the You can also use this function to locate your vehicle in parking garages etc.


button.


Sedan: Unlocking the luggage compartment lid Press the The luggage compartment lid opens a short distance, regardless of whether it was locked or unlocked.


button for approx. 1 second.


The luggage compartment lid swings back and up when opened. Ensure that


28


there is sufficient clearance. To avoid locking yourself out by accident, do not place the remote control in the cargo bay. A previously locked luggage compartment lid is locked again after closing. Before and after each trip, check that the lug- gage compartment lid has not been inadvert- ently unlocked.<


button for approx. 1 second.


Sports Wagon: Unlocking the tailgate Press the The tailgate opens a short distance, regardless of whether it was locked or unlocked. The tailgate swings back and up when opened. Ensure that there is sufficient clearance. To avoid locking yourself out by accident, do not place the remote control in the cargo bay. A previously locked tailgate is locked again after closing. Before and after each trip, check that the tail- gate has not been inadvertently unlocked.<


If you press the button on the remote control a second time for a longer period


within three seconds, the roll-up cover is raised*. Before closing the tailgate, press the roll-up cover downward until it engages.<


Confirmation signals You can activate or deactivate the confirmation signals. iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Door locks" 3. "Flash when lock./unlock."


4. Press the controller.


ba8_E9091_cic.book Seite 29 Mittwoch, 29. Oktober 2008 2:59 14


Flashing when locking/unlocking the vehi-


cle is switched on.


Opening and closing: Using the door lock


Malfunctions The remote control may malfunction due to local radio waves. If this occurs, unlock and lock the car at the door lock with the integrated key. In vehicles without an alarm system* or conve- nient access*, only the driver's door can be locked and unlocked with the integrated key via the door lock. If the car can no longer be locked with a remote control, the battery in the remote control is dis- charged. Use the remote control on an extended trip to recharge the battery, refer to page 26. The remote control for convenient access* contains a battery that may have to be changed, refer to page 35.


For US owners only The transmitter and receiver units comply with part 15 of the FCC/Federal Communications Commission regulations. Operation is gov- erned by the following: FCC ID: LX8766S LX8766E LX8CAS Compliance statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: > This device must not cause harmful inter-


ference, and


> This device must accept any interference received, including interference that may cause undesired operation.


Any unauthorized modifications or changes to these devices could void the


user's authority to operate this equipment.<


You can set the way in which the car is unlocked, refer to page 27.


In vehicles without an alarm system* or convenient access*, only the driver's


door can be locked via the door lock.< To lock all doors, the fuel filler door and the lug- gage compartment lid at once: 1. With the doors closed, lock the vehicle


using the button for the central locking sys- tem in the interior, refer to page 30.


2. Unlock and open the driver's or front pas-


senger's door, refer to page 30.


3. Lock the vehicle.


> Lock the driver's door via the door lock


using the integrated key, or


> push down the locking knob on the front


passenger's door and close the door from the outside.


Convenient operation If the vehicle is equipped with an alarm system* or convenience access*, you can also operate the windows and the glass roof*/panorama glass roof* via the door lock. Hold the key in the position for unlocking or locking.


Watch during the closing process to ensure that no one is injured. Releasing


the key stops the operation.<


Manual operation In the event of an electrical malfunction, you can lock and unlock the driver's door by turning the


29


ba8_E9091_cic.book Seite 30 Mittwoch, 29. Oktober 2008 2:59 14


integrated key to the corresponding limit posi- tions in the door lock.


Automatic locking is switched on and is stored for the remote control currently in use.


Opening and closing: From inside


This button serves to unlock or lock doors and the luggage compartment lid/tailgate, but does not activate the anti-theft system. The fuel filler door remains unlocked.


Automatic locking You can also set the situations in which the car locks: iDrive, for operating principle refer to page 16. 1. "Settings" 2. "Door locks" 3. Select the desired function:


> "Lock if no door is opened"


The central locking system locks the vehicle after a brief time if no door has been opened.


> "Lock after start. to drive"


The central locking system locks the vehicle when you drive away.


Unlocking and opening doors > Either unlock the doors together using the button for the central locking system and then pull the door handle above the armrest or


> pull on the door handle of each door twice: the first time unlocks the door, the second time opens it.


Locking > Use the central locking button to lock all of


the doors simultaneously, or


> press down the safety lock button of a door. To prevent you from being locked out, the open driver's door cannot be locked using the lock button.


Persons or animals in a parked vehicle could lock the doors from the inside. You


should therefore take the remote control with you when you leave the vehicle so that the latter can be opened from outside.<


Luggage compartment lid/ tailgate


In order to avoid damage, make sure there is sufficient clearance before opening the


luggage compartment lid/tailgate.<


Opening from inside


Press the button: the luggage compartment lid/ tailgate opens unless it has been locked.


30


ba8_E9091_cic.book Seite 31 Mittwoch, 29. Oktober 2008 2:59 14


Opening from outside


Sedan


Before closing the tailgate, press the cover downward until it engages.


Opening manually


Sports Wagon In the event of an electrical malfunction: 1. From the cargo bay, swing the cover on the


tailgate upward.


Press the button, see arrow, or the button on the remote control for a longer period. The lug- gage compartment lid will open slightly. It can now be swung upwards.


In the event of a malfunction, please con- tact your BMW center or a workshop that


works according to BMW repair procedures with correspondingly trained personnel.<


Sports Wagon


Press the button, see arrow, or the button on the remote control for a longer period. The tail- gate will open slightly. It can now be swung upwards. Press the button, see arrow, or the the remote control a second time for a longer period within three seconds: the roll-up cover is raised.


button on


2. Pull the ring upward. The tailgate is


unlocked.


3. Open the tailgate and close the cover again. The tailgate is locked as soon as it is pressed shut.


31


ba8_E9091_cic.book Seite 32 Mittwoch, 29. Oktober 2008 2:59 14


Locking or unlocking separately


Make sure that the closing path of the luggage compartment lid/tailgate is clear,


otherwise injuries may result.<


Sedan


The switch is located in the glove compartment. 1 Locking the luggage compartment lid 2 Unlocking the luggage compartment lid


Locking separately Push the switch in the direction of arrow 1. The luggage compartment lid is locked and cannot be unlocked using the central locking system. If you give the remote control without the inte- grated key to someone else while the glove compartment is locked, the luggage compart- ment lid cannot be opened. This is an advan- tage when valet parking, for example. Locking the glove compartment, refer to page 103.


Unlocking separately Push the switch in the direction of arrow 2.


Emergency release


Sports Wagon


Sports Wagon: opening and closing the rear window Small items can be loaded and unloaded quickly when the rear window is opened sepa- rately.


The roll-up cover is raised when the rear window is opened. Before closing the rear window, press the roll-up cover downward until it engages.<


Pull the lever in the cargo bay. The luggage compartment lid is unlocked.


Closing The handle recesses on the interior trim of the luggage compartment lid/tailgate make it easier to pull down.


32


Press the button: the rear window opens slightly. It can now be swung upwards.


ba8_E9091_cic.book Seite 33 Mittwoch, 29. Oktober 2008 2:59 14


Press the window shut to close it.


Make sure that the corners of any pointed or sharp-edged cargo are padded if they could bump against the rear window while the vehicle is in motion, otherwise the heating ele- ments of the rear window could be damaged.<


Switching off an alarm > Unlock the car with the remote control, refer


to page 27.


> Insert the remote control all the way into the


ignition lock.


Indicator lamp displays


Alarm system*


The concept The vehicle alarm system responds: > When a door, the hood or the luggage com-


partment lid/tailgate is opened


> To movements inside the vehicle: Interior


motion sensor, refer to page 33


> When the car's inclination changes, for


instance if an attempt is made to jack it up and steal the wheels or to raise it prior to towing away


> When there is an interruption in the power


supply from the battery


The alarm system signals unauthorized entry attempts for a short time by means of: > An acoustic alarm > Switching on the hazard warning flashers > Flashing the high beams


Arming and disarming When you lock or unlock the vehicle, either with the remote control or at the door lock, the alarm system is armed or disarmed at the same time. You can open the luggage compartment lid/tail- gate even when the alarm system is armed, by pressing the button on the remote control, refer to page 28. The lid is locked and moni- tored again as soon as you close it.


Panic mode* You can trigger the alarm system if you find yourself in a dangerous situation: Press the To switch off the alarm: press any button.


button for at least three seconds.


> The indicator lamp under the inside rear- view mirror flashes continuously: the sys- tem is armed.


> The indicator lamp flashes after locking:


doors, hood, luggage compartment lid/tail- gate or rear window are not properly closed. Even if you do not close the alerted area, the system begins to monitor the remaining areas, and the indicator lamp flashes con- tinuously after approx. 10 seconds. The interior motion sensor and the tilt alarm sensor are not activated.


> The indicator lamp goes out after unlocking:


your vehicle has not been disturbed while you were away.


> If the indicator lamp flashes after unlocking


until the remote control is inserted in the ignition, but for no longer than approx. 5 minutes: your vehicle has been disturbed while you were away.


Tilt alarm sensor The tilt of the vehicle is monitored. The alarm system reacts, e.g. to attempts to steal a wheel or tow the vehicle.


Interior motion sensor In order for the interior motion sensor to func- tion properly, the windows and glass roof must be completely closed*.


33


ba8_E9091_cic.book Seite 34 Mittwoch, 29. Oktober 2008 2:59 14


Avoiding unintentional alarms The tilt alarm sensor and interior motion sensor may be switched off at the same time. This pre- vents unintentional alarms, e.g. in the following situations: > In duplex garages > During transport on car-carrying trains,


boats/ships or on a trailer


> When animals are to remain in the vehicle


button on the remote control


Switching off tilt alarm sensor and interior motion sensor Press the again as soon as the vehicle is locked. The indicator lamp lights up briefly and then flashes continuously. The tilt alarm sensor and the interior motion sensor are switched off until the next time the vehicle is unlocked and subse- quently locked again.


> The engine can only be started when the


vehicle detects that the remote control cur- rently in use is inside the vehicle.


Comparison to the standard remote control In general, there is no difference between using convenient access or pressing the buttons on the remote control to carry out the functions mentioned above. You should therefore first familiarize yourself with the instructions on opening and closing starting on page 26. Special features regarding the use of conve- nient access are described below.


If you notice a brief delay while opening or closing windows or the glass roof/pan-


orama glass roof, the system is checking whether a remote control is inside the vehicle. Please repeat the opening or closing proce- dure, if necessary.<


Unlocking


Grasp the handle on the driver's or front pas- senger's door completely, arrow 1. This corre- sponds to pressing the


button.


Locking Touch the surface, arrow 2, with your finger for approx. 1 second. This corresponds to pressing the


button.


To preserve the battery, please make sure that the ignition and all electrical


consumers are switched off before locking the vehicle.<


Convenient access* Convenient access enables you to enter your vehicle without needing to hold the remote con- trol in your hand. All you need to do is wear the remote control close to your body, e.g. in your jacket pocket. The vehicle detects the corre- sponding remote control within the immediate vicinity or in the passenger compartment. Convenient access supports the following functions: > Unlocking/locking the vehicle > Unlocking the luggage compartment lid/


tailgate separately


> Engine starting > Convenient closure


Functional requirement > The vehicle or the luggage compartment


lid/tailgate can only be locked when the vehicle detects that the remote control cur- rently in use is outside of the vehicle.


> The vehicle cannot be locked or unlocked


again until after approx. 2 seconds.


34


ba8_E9091_cic.book Seite 35 Mittwoch, 29. Oktober 2008 2:59 14


Convenient closure For convenient closure, keep your finger on the surface, arrow 2.


Unlocking the luggage compartment lid/tailgate separately Press the button on the outside of the luggage compartment lid/tailgate. This corresponds to pressing the


button.


If the vehicle detects that a remote con- trol has been accidentally left inside the


locked vehicle's cargo bay after the luggage compartment lid/tailgate or rear window is closed, the lid will reopen. The hazard warning flashers flash and an acoustic signal* sounds.<


Switching on radio readiness Radio readiness is switched on by pressing the start/stop button, refer to page 53.


Do not depress the brake or the clutch, otherwise the engine will start.<


Starting the engine You can start the engine or switch on the igni- tion when a remote control is inside the vehicle. It is not necessary to insert a remote control into the ignition switch, refer to page 53.


Switching off the engine in cars with automatic transmission The engine can only be switched off when the selector lever is in position P, refer to page 54. To switch the engine off when the selector lever is in position N, the remote control must be in the ignition switch.


Malfunction Convenient access may malfunction due to local radio waves. If this happens, open or close the vehicle via the buttons on the remote con- trol or using the integrated key. To start the engine afterward, insert the remote control into the ignition switch.


Warning lamps


The warning lamp in the instrument cluster lights up when you attempt to start the engine: the engine cannot


be started. The remote control is not inside the vehicle or is malfunctioning. Take the remote control with you inside the vehicle or have it checked. If necessary, insert another remote control into the ignition switch.


The warning lamp in the instrument cluster lights up while the engine is running: the remote control is no longer inside the vehicle. After the engine is switched off, the engine can only be restarted within approx. 10 seconds.


The indicator lamp in the instrument cluster comes on and a message appears on the Control Display: replace the battery in the remote control.


Replacing the battery The remote control for convenient access con- tains a battery that will need to be replaced from time to time. 1. Take the integrated key out of the remote


control, refer to page 26.


2. Remove the cover. 3.


Insert the new battery with the plus side fac- ing up.


4. Press the cover on to close.


Take the old battery to a battery collec- tion point or to your BMW center.<


35


ba8_E9091_cic.book Seite 36 Mittwoch, 29. Oktober 2008 2:59 14


Windows


To prevent injuries, watch the windows while closing them.


Take the remote control with you when you leave the car, otherwise children could operate the electric windows and possibly injure them- selves.<


Opening, closing


> Press the switch to the resistance point:


The window opens as long as you press the switch.


> Press the switch beyond the resistance


point: The window opens automatically. Press the switch again to stop the opening move- ment.


You can close the windows in the same manner by pulling the switch. There are separate switches in the rear seat armrests.


After switching off the ignition When the remote control is removed or the igni- tion is switched off, you can still operate the windows for approx. 1 minute as long as no door is opened.


Convenient operation For information on convenient operation via the remote control or the door lock, refer to page 27 or 29. For information on closing with conve- nient access, refer to Locking on page 28.


36


Pinch protection system If the closing force exceeds a specific value as a window closes, the closing action is interrupted and the window reopens slightly.


Despite the pinch protection system check and clear the window's travel path prior to closing it, otherwise the safety system might fail to detect certain kinds of obstruc- tions, such as thin objects, and the window would continue closing. Do not install any accessories that might inter- fere with window movement. Otherwise the pinch protection system could be impaired.<


Closing without pinch protection If there is an external danger, or if ice on the win- dows, etc., prevents you from closing the win- dows normally, proceed as follows: 1. Pull the switch past the resistance point and hold it there. Pinch protection is limited and the window reopens slightly if the closing force exceeds a certain value.


2. Pull the switch again past the resistance


point within approx. 4 seconds and hold it there. The window closes without pinch protection.


Safety switch


With the safety switch, you can prevent the rear windows from being opened or closed via the switches in the rear passenger area, by chil- dren, for example. When the safety function is switched on, the LED comes on.


Always press the safety switch when chil- dren ride in the rear, otherwise


unchecked closing of the windows could lead to injuries.<


ba8_E9091_cic.book Seite 37 Mittwoch, 29. Oktober 2008 2:59 14


Sedan: glass roof*, electric


To prevent injuries, watch the glass roof while closing it.


Take the remote control with you when you leave the car, otherwise children could operate the roof and possibly injure themselves.<


Raising Press the switch. > The closed glass roof is raised and the slid-


ing visor opens slightly.


> The open glass roof automatically travels into the raised position. The sliding visor remains completely open.


Opening, closing > Press the switch backwards to the resis-


tance point. The glass roof and the sliding visor open together as long as you hold the switch in this position.


> Press the switch backwards past the resis-


tance point. The glass roof and the sliding visor open automatically. Briefly press the switch again to stop the opening movement.


You can close the glass roof in a similar manner by pressing the switch forwards. The sliding visor remains open and can be closed by hand. For information on convenient operation via the remote control or door lock, refer to page 27 or 29.


After switching off the ignition When the remote control is removed or the igni- tion is switched off, you can still operate the roof


for approx. 1 minute as long as no door has been opened.


Pinch protection system If the glass roof encounters an obstruction dur- ing closing from approximately the middle of the opening in the roof, or during closing from the raised position, the closing movement is interrupted and the glass roof is opened again slightly.


Despite the pinch protection system check and clear the roof's travel path prior to closing it, otherwise the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the roof would con- tinue closing.<


Closing without pinch protection If there is an external danger, press the switch forward past the resistance point. The roof closes without pinch protection.


Following interruptions in electrical power supply After a power failure, there is a possibility that the glass roof can only be raised. The system must be initialized. BMW recommends having this work done by your BMW center.


Closing manually* In the event of an electrical malfunction, you can move the glass roof manually: 1. Unclip the front of the cover of the interior


lamps using the screwdriver from the onboard tool kit, refer to page 222.


37


ba8_E9091_cic.book Seite 38 Mittwoch, 29. Oktober 2008 2:59 14


2.


Insert the screwdriver into the openings on each side to press the clips.


it in your field of vision until it is shut. Take the remote control with you when you leave the car, otherwise children could operate the roof and possibly injure themselves.<


3. Remove the control unit. 4. Unplug the motor. Considerably less effort


will be required for manual operation.


5.


Insert the Allen wrench* supplied with the onboard tool kit, refer to page 222, into the opening provided. Move the glass roof in the desired direction.


6. Reinstall the control unit and reattach the


lamp cover.


Sports Wagon: Panorama glass roof*


To prevent injuries, exercise care when closing the panorama glass roof and keep


38


Raising Press the switch. The closed roof is raised and the sliding visor opens slightly.


Do not close the sliding visor forcibly with the roof in the raised position, as this


would damage the mechanism.<


Opening, closing


Sliding visor The sliding visor can be opened or closed sep- arately when the roof is in the closed or raised position. > Press the switch backwards to the resis-


tance point. The sliding visor opens as long as you keep the switch in this position.


> Tap the switch backwards past the resis-


tance point. The sliding visor opens automatically. Tap- ping the switch again stops the operation.


You can close the sliding visor in a similar man- ner by pressing the switch forwards.


Panorama glass roof When the sliding visor is open, proceed as described under Sliding visor. For information on convenient operation via the remote control or door lock, refer to page 28 or 29.


ba8_E9091_cic.book Seite 39 Mittwoch, 29. Oktober 2008 2:59 14


Opening and closing the roof and sliding visor at the same time Tap the switch twice in quick succession beyond the resistance point. Tapping the switch again stops the operation.


Convenience functions > With the roof open, press the switch twice:


The roof is raised.


> With the roof open, tap the switch twice in


the direction for opening: The roof is opened fully.


Comfort position In the comfort position, the roof is not com- pletely open, thus reducing wind noise in the passenger compartment. Each time the panorama glass roof is opened or closed completely, it stops in the comfort posi- tion. If desired, continue the movement by pressing the switch.


After switching off the ignition When the remote control is removed or the igni- tion is switched off, you can still operate the roof for approx. 1 minute as long as no door has been opened.


Pinch protection system If the panorama glass roof or the sliding visor encounters an obstruction while closing from a position about two-thirds closed, or during closing from the raised position, the closing movement is interrupted and the panorama glass roof and the sliding visor are opened again slightly.


Despite the pinch protection system check and clear the roof's travel path prior to closing it, otherwise the safety system might fail to detect certain kinds of obstructions, such as very thin objects, and the roof would con- tinue closing.<


Closing without pinch protection If there is an external danger, press the switch forward past the resistance point and hold it there. The roof closes without pinch protection.


Following interruptions in electrical power supply After a power failure, there is a possibility that the panorama glass roof can only be raised. The system must be initialized. BMW recommends having this work done by your BMW center.


Closing manually* In the event of an electrical malfunction, you can move the panorama glass roof manually: 1. Unclip the front of the cover of the interior


lamps using the screwdriver from the onboard tool kit, refer to page 222.


2.


Insert the screwdriver into the openings on each side to press the clips.


3. Remove the control unit.


39


ba8_E9091_cic.book Seite 40 Mittwoch, 29. Oktober 2008 2:59 14


Loading...
x