1989 Toyota Soarer MZ20  

srhead
  • srhead
  • Budding User
  • Member No.: 206,287
  • Joined: 8-November 10
  • Posts: 1,171
Post #1 post 27th January 2012 - 08:34 AM
list of parts below

engine, 3.2ltr 7mgte
os giken forged pistons
hks ring set
carrillo conrods and rod bolts
trd main bearings, acl race big ends bearings
all balanced bottom end
custom trap door sump
arp main studs
arp head studs
hks custom head gasket 2.0mm
cnc head porting to make the 7mgte head breath
toda cams in264/ex264 8.0mm lift
os giken adjustable cam gears
toda hd valve springs and retainer/shim kit
greedy timing belt and new idler bearing
trust t88 34d 18cm turbo kit
trust stainless steel maifold
trust external waste gate
triple plate os giken clutch, converted to a twin plate, 4 puck solid centre by jim berry race clutch
os giken pull to push convertor
r154 with os giken close ratio gear set
new clutch master cyl and slave
trd 2 way diff with 4.1.1 ratio

hks fcon pro v ecu with map sensor ( afm gone )
1000cc denso injectors
hks 8 heat range spark plugs
sard fpr
2x bosch 044 external fuel pumps
3 litre surge tank
r33 gtr lift pump intank
all fuel lines braided

trust 100mm thick intercooler
custom alloy intercooler pipes
alloy radiator
new water pump
new alternator
sard coolant overflow tank
3 inch exhaust
trust oil cooler kit with trust oil filter reloctator

work xd9 in grey
18x10 rears
18x9 front
work blue wheel nuts
braided brake lines
machined rotors and qfm pads
hsd hr coilovers
new front lower arm bushes and ball joint
safety 21 6 point roll cage
bride brix II drivers seat on bride seat rails
rolled rear guards
new windscreen

myt88 number plates

This post has been edited by srhead: Jan 28 2012, 08:10 AM
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20
1989 Toyota Soarer Mz20

Comments

  • Boost Network 28
  • riggaz
    Post #2

    Porn.

    SIK 31
    Post #3

    FUCK YEAH!

    NOL499
    Post #4

    1 of my favorite cars, so tough

    srhead
    Post #5

    Thanks guy, keep you eye on this car, was built by Marty at mw performance when he still owned it, now that I have it, I'm slowly going further with the build and want to chase 400rwkw this year, looking for some Niger cams and a microtech, or haltech if anyone has one for a 7mgte let me know.

    51LVY
    Post #6

    thought it looked familiar, use to always see it a mw. phat car

    VTR
    Post #7

    Win!

    jo88
    Post #8

    nice dude

    derb
    Post #9

    Another period correct piece of hotness, good shit mate. Loving all the 7M engines on here lately.

    EssR20
    Post #10

    Epic.

    krayziebenno
    Post #11

    never used to like this shape but examples like yours have since converted me. awesome example and GL with the future plans

    Who dat
    Post #12

    XD9'S look sexy as on this! Ive always loved these cars biggrin.gif

    srhead
    Post #13

    Thanks for the posts guys loveing the feed back, car I also in the classifieds if anyone wants a big hp monster. With even more potential.

    _Ben
    Post #14

    Good to see a 7M rather than the usual 1/2J smile.gif

    s1y180
    Post #15

    is this marty's old beast? if so nice smile.gif

    srhead
    Post #16

    yeah its martys old car, still runs like a rig and becoming beter every weeks lol

    NTG78
    Post #17

    I like this model Soarer

    clutch-monkey
    Post #18

    awesome! i love 80's and older jap stuff, these old soarers are cool.

    tavomagoo
    Post #19

    Best soarer I've seen. Nice work

    Datsun_dan64
    Post #20

    old school cool cool.gif haha

    supraddict
    Post #21

    This Mc lovin spec aka: Bad Ass

    matmarhar
    Post #22

    QUOTE (tavomagoo @ Jan 27 2012, 04:28 PM) *
    Best soarer I've seen. Nice work

    i tend to agree with this

    Slick Lad
    Post #23

    very nice mate

    1%ER
    Post #24

    Fail & then telling us it's forsale after yappin about chasing more HP...

    srhead
    Post #25

    1%er??? I don't understand? It is for sale. But I'm still working on the build 494hp on 1.1 bar, going to change tuners,run more boost and clean up the interior from grandma spec, I it doesn't sell. Now do you understand?

    tas_ae71
    Post #26

    Is that a triple core china rad? assuming you have a temp gauge, how does it go?

    srhead
    Post #27

    na its a custom one made here in aus.

    never gets over 80 to 90 degrees

    iv added a pic from the last dyno run on the sunshine coast in dec.

    aloshan
    Post #28

    nice man , very very nice.

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x