#1
23rd May 2011 - 07:24 AM
Post |
|
---|---|
Hey all just wondering if anyone knows if a 31 skyline diff is same as 31 pintara. I know some are irs so they won't fit... cheers
|
iamhappy46
Post #5
R31 Silhouette have a factory BW LSD |
---|
pipster11
Post #6
R31 Silhouette have a factory BW LSD Coincidentally, the rebuild kits had run out of stock around the same time the AU Falcon was released. Thankfully, the BA/GF Falcon runs the exact same LSD in the Falcon, so the BW centre from a Falcon can be used in a R31 pretty sure they changed the diffs a lot with ba's especially with the move to irs, the ute/wagon diffs were still bw's but i think they are like bw81's or something i had a look for something to put in the 31 with no avail |
---|
toomanytoys
Post #7
pretty sure they changed the diffs a lot with ba's especially with the move to irs, the ute/wagon diffs were still bw's but i think they are like bw81's or something i had a look for something to put in the 31 with no avail all holden utes from vn to vs "should" have lsd centres and are still the bw78 28 spline. only the irs is the bw80 any yeh no parts swap over. but that still leaves a massive selection. I used a ba slippery for a vn, I might add the oil cost me nearly as much as the centre. |
---|
abouttimeglenn
Post #9
Yes they fit, i wreck them and have heaps of them skyline come out 3.89 gears and pintara 4.11 but all bolt up the same and in the same holes ect |
---|
toomanytoys
Post #11
the 3.89's from the skyline will give you better wheel speed if you have the grunt. As mentioned solid rear commodore ute's run the same centre 28 spline. the axles are different for the pintara 25 spline. be sure and get this right. Falcons pre independant also run the same centre. if you have the housing already just run skyline axles and chase up a centre. most wreckers will have one |
---|
kyledowdle158
Post #13
Yes they fit, i wreck them and have heaps of them skyline come out 3.89 gears and pintara 4.11 but all bolt up the same and in the same holes ect Are the axle the same length i wanna try fit the Pintra axle into my sigma because there the same spline and my length off my diff is the same as a 31?? |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!