Need Some Advice On Daihatsu Motors  

MrBlue
  • MrBlue
  • Site Newbie
  • Member No.: 372,670
  • Joined: 19-October 14
  • Posts: 11
  • From: Adelaide
Post #1 post 12th March 2015 - 07:23 AM
Hey guys.
Just looking around for some info/advice regarding the Daihatsu Charade G200rs motors.

I've owned the car for a while now and I'm craving a little more power.
Just wondering if anyone has any kind of advice on the matter of trying to do engine work to the stock HC motor or if I should just do the 1.6ltr applause swap that everyone seems to do. (The 1ltr GTti motor is out of the question because student life.)
I do plan on boosting it as well at some stage in the close future.

Thanks in advance for any advice.
Attached File  20150127_142608.jpg ( 2.14MB ) Number of downloads: 5
 
mudbutton
Post #2

There's a bloke doing hillclimb and sprints in a charade with an applause motor and it goes like a raped ape.

Presto
Post #3

There's also a bloke in an Excel that does hillclimbs that needs to go faster. wavey.gif

mudbutton
Post #4

Yeah good on ya. 😀
We've go a new head being ported and a reground cam getting done. So we're getting there. Problem is the little shitter is also a daily driver as well and the bride has gotten attached to it, so she won't strip out the interior.
Looks like I'm in the market for another little buzz box...

Presto
Post #5

I'm hoping to further upgrade my brakes. They are VT fronts so I now want to change to a VS V6 booster with VT master cylinder and Falcon AU reservoir.

mudbutton
Post #6

Why the falcon reservoir?

Presto
Post #7

The VS reservoir sits at the correct angle but the little screw that secures the reservoir to the master cylinder doesn't line up so it would require drilling and tapping. The Falcon reservoir lines up perfectly with the mounting hole and sits at the correct angle. The VT reservoir doesn't sit at the correct angle so can't hold the full amount of fluid. By using the VT master cylinder the front rotors are fed by a 1.25" bore which is better for the twin piston calipers when compared to the original single piston units which required a 1" bore. All I hope is that I see some improvement. Should all be sorted well before round 2 at Mt. Cotton.

mudbutton
Post #8

That's a lot of preparation going into round 2. In contrast, we may top up the tank with fresh 98.

  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x