Selling my 1997 180SX type x !
Reason for sale is im wanting to get more into drifting and dont wanna trash such an immaculate type x.
Car has the following mods.
Coilovers
Full exhaust - GKTECH dump + front combo. Just jap hi flow cat. Some unknown catback with cannon.
new water pump
17" Drifteks fronts 8" rears 9".
Pod Filter.
Tinted windows.
Nismo Shifter nob
Wing was taken off and boot holes welded before i got the car.
Turbo Timer + Lazy eyes controller.
Aftermarket Alarm.
Serviced every 5k with motul turbo lite.
When i got the car about 6 months ago i changed every fluid in the car. Dif Gearbox power steering brake everything you can think of lol.
Only ever run stock boost. Still has stock side mount.
I have most of the stock parts. All the EGR, Front Pipe, Air Box, Stock BOV etc.
Car has stereo but will most likley rip it out and replace with stock unless you wanna work something out.
Just replaced fuel pump with walbro.
Has HID headlight kit installed.
Car has 84,xxx on it.

Asking 13.8k with the stock type x wheels or swaps for a s13 / cheaper pig 180 with cash my way

hey mate got this if interested http://www.boostcruising.com/forums/index....howtopic=454996

you can keep your wheels and anything else you want let me know

hey mate consider swapping for anything else besides a s13/180?

check topics for cefiro

have u still got this?

Anyways Buddy i have an S13 Silvia i planned to bring it down here from Qld where i built it but i cant register it because of the modifications done to it its a CA18det its now 1.9ltr thanks to 20thou oversized forged CP pistons Spool Rods ACL Gaskets and Bearings with 1.3 mm MLS headgasket Tuned Length Manifold T28 BB off an S15 custom dump pipe to cat then 3 inch stainless exhaust ive spent more than 7k on the motor itself with machining and parts has a Exedy Heavy duty clutch Uras Kit modified front bar for more air flow alot more aswell if your interested let me no asap as i have another 180sx lined up. Car is still yet to be run as its having the Microtech lt10s wired in with the X4 ignition module. Pm me if keen