A1RM are fantastic, more bite than a standard pad when dead cold, and only get better when they get hot, and better still when they start to smoke up and the rotors go blue!

Bendix Ultimate's which I had before these for roughly the same price are absolutely terrible in comparison. Pads aren't noisy, basically the A1RM is awesome, will buy again in the future!

I used these pads on my S14... held up well! Similar in pad feel to Ferrodo DS2500s but without the hefty price tag

HPX Pads received Greg- fantastic delivery speed!!
Bedded them in last night and i can say i'm VERY impressed. They have more bight and better co efficient than the RB74's i was previously using with better pedal modulation.

Got my HPX pads bedded in now and they are very impressive. Progressive and pull up very smoothly, or VERY quick if you really want. They also produce stuff all dust and aren't noisy at all with my slotted rotors either. For the money these are excellent pads and much more confidence inspiring than the crappy pads that were on for compliance.

The QFM A1RM pads were a huge step up in pedal feel and control-ability...No more dead pedal, locking, ABS interference etc. The HPX pads I know nothing about but heard good things.

IMHO, if your ever doing a track day or maybe just hard driving, A1RM are the way to go...

Well the QFM HPX BRAKE PADS are bedded in and I`m very happy with them.
I can really feel the better braking performance.

My Calais was simply unstopable, brakes had no feel, no stopping power, it was no good at all. Then I discovered HPX brake pads. My car feels so much better, the car pulls up really quick with no brake noise and they don't fade at all.

THANKS GSL :yeah:

hey just wanna thank you for the qfm a1rm pads. i raced today at oran park and didnt get any brake fade what so ever. on the track for 15minute periods and driving hard they felt great!

Thought I'd add my 2c.

I recently made over my brakes with some braided lines, slotted rotors and the QFM A1RM pads. It wasn't just a pad change so I can't compare directly with the old set up however I'm bloody impressed with how the car pulls up now and I believe a lot of that is down to the new pads. The brake fade is quite minimul and significantly better than the stock Toyota pads I had on it previously. Slam on the brakes and it bites hard, time and time again. So much so that I sometimes feel if it pulled up quicker my face would somehow detach from my head and hit the windscreen like some weird crossover film between 'Gone in 60 seconds' and 'Face Off'. Unlike my old setup these certainly give me a sense of confidence through the twisties!

Either way, QFM A1RM pads = WIN

I just got the QFM A1RM's and they went well at sandown. Greg was very helpful and delivery was only 2 days.
Very cheap for $130. I don't think I'll be spending big on pads again after how they performed at Sandown.

I will monitor the wear but I get to about 220kmh before jumping on the brakes and they felt similar to my DS2500's.

Well said and i couldn't agree more. I have been running with QFM A1RM pads in my RZ Supra (4/2 pot) for about two months now and i have not looked back. I previously had Project Mu's and for street and the odd track day i would not recommend anything other than the A1RM's. A fantastic, excellent performing pad from the moment you leave the garage!

Hey mate,

Can i get a price on a set for an S15??

Just a bit of feedback on the A1RM that we installed on my girlfriends car a few months back. After a number of laps at Collie where previously her Ferodo's would start to get soggy, the QFM pads were still biting hard and gave her heaps more confidence in later braking. They were also biting harder from cold, and she didn't manage to get them to fade the entire time. I had a go and I was pretty impressed for the price of the pad!