hey guys i have just bought a 1.3L sierra and just wondering wat engine conversions are possible for these and wat kind of money am i lookin at to do one.
any help would be much appreciated
cheers.

LS1.

I dont see why an sr20 wouldnt fit. I'm no expert on these, jump on HERE and no doubt you'll be able to get plenty more info and advice

a few mates have but Ca/13b/12a. VN/VP commo engines in sierras... i guess anything is possible with enough $$ but the wisest conversion would be a vitara V6

no wisest would be a 4age//agze as there are off the shelve conversion kits for these.
people put in GTI motors too. Suzisport sell kits for this too.

But, there is no real reason to change the motor in a sierra. they are more than capable off road with a few suspension mods.

4age or

1.6efi jimny motor with a supercharger.. one of the boys here has done that and it works well

g16a or g16b adaptor kits search lowrange off road u will also ned to do sump and pick up like 200 from suzi sport adaptor kit like 180 from low range go the 16a i did less wirring 32/36 carb off cortina 2lt set of extractors wiil go heaps good also try auszookers.com

hey guys thanks for all the ideas im leani more towards the 4age conversion as i have a mate with a spare motor just curious wats involved in these in the way of wiring and shit.
cheers

i have been askin around abit and a mate of mine has a head ecu wiring loom and both manifolds off a gti do these bolt onto the standard sierra motors.
cheers

Call Rod at 1 stop suzi shop. His sierra hammers, smokes 32 pedes like nothing and its still 4cyl suzi, might have a bit of boost in it though.

his sold it now im runing gti with 10psi and it spins 32s easy the best conversion ive done
http://www.youtube.com/watch?v=f0hkFzutpPI...feature=channel
ive 6.5.1 gears and nothing stops it up or down hills apart from a mising locker

hey mate i can get a gti head already machined with inlet and exhaust manifolds wiring harness and ecu just wondering do u know if these bolt on to the standard sierra 1.3 carby motors?
any help would be appreciated
cheers.

im pretty sure they bolt up, just that the swift gti block has forged pistons and crank. The gti block also has a crank cradle

there is an sr powered zook on outerlimits 4x4 for sale, save you a lot of headaches.

do u rekon the standard block would b stroung enough or id just be creatin more problems for myself?