Haha cheers boys! Big 24 now.
Bought myself a present yesterday - $1200 worth of tools haha

Now officially a drift pig.
OK so on a account of my bonnet needing to be replaced/repaired from where the handbrake failed and it rolled into my shed, i figured id try my hand at busting out a couple of bonnet vents before i get a new one and see how it goes.
Theyve still gotta be finished with a bit of pinchweld around the tin or something to neaten it up.
All I did was use the bonnet bracing as a guide and cut a couple of V shapes, leaving the tin attached along one face, so that i can bend it down and fit a piece of mesh along the front faces to hold the tin in place as well as look better than just a hole.
Pretty much looks how i expected is was going to. Pumps out a lot of hot air, but probably doesnt do too much function wise.

thats looks sweat nice cover up

Thanks man. looks a bit better not in photos i reckon - pretty proud of it haha - never taken to tin with a grinder before so i figured im ditching the bonnet anyway so i'll have a shot.

If you want R31 parts and panels i know of some for real cheap

Rubbed back the old R31 today, gettin up early in the AM to paint it. Removed the rear wing and painted it, deciding whether i put it back on or not - i'll post pics with and without it and let the people decide cos im comfy either way. Gotta pull the mud flaps off it too...
Went into my old work - autobarn - and had some paint mixed up. Went with the factory paint code, but added a decent amount of blue pearl, to really clean up the colour a bit and make it really flick along the body lines in the sun.
Also had a dark metallic charcoal mixed up which i will use on the bonnet, with a bit of flatting agent so it wont have any real sheen to it. The colour actually looks very carbon fibre-ish and i'll be painting my vented bonnet with that, and painting my standard bonnet in the same colour as the rest of the car.
I mixed up a real dark coppery-gold colour and ill be painting my white wheels with it too - i'll paint two tomorrow and the other two WHEN I GET THEM BACK FROM DAN (if your reading this haha).
I reckon itll look good - not sure whether to do around the windows in the same silver as the rest of the car, or if i should do them in the charcoal colour...
Seriously contemplating running some coilovers - so if anyone wants a set of new king springs and new shock absorbers for their skyline, literally done about 100km of driving TOPS, you can have them for $500. Thats $125 a corner for all new suspension, with lower, stiffer springs.

I knoew of some rear s13 coilover modded to fit an R31 for $350. they are teins.

hey man if you havnt sorted a bonnet yet ive got 1 here if ya want it, swap for your stove top lights if you want to, giv me a call, damien 0413549348

already got one man! even delivered it for moe. I have 3 pairs of stove tops now. I have aone tinted set, one untouched set, and one set that im cutting apart and customizing.

looking good mate
you decided what your gonna do with it?
sell it, keep it, hr31 it?

Looks awesome man. I bought an old R31 shadow not sure what series it is a while ago. Goes all right. I have stripped the interior to just the front seats and dash. Its white with all clean panels, straight through pipes from the cat, just got lowered king springs atm. But yeah i want to buy another for track and street use.

love the color, whats is it

atomic mica green?

its similar to atomic mica - i made the colour myself so there is no other car with this paint :-)
Its for sale at the moment - looks like one of the other boys at Bob Romano's is buying it.
Picking up my supra tomorrow if all goes well, and will start getting it ready.

looks to me some one cant make there mind up:P

that is 100% correct haha

painted and buffed!

looks fukn sweet as man, tinted stove tops u still got em, how much, n if you still have the extractors i'll take em off ya hands.

Awesome colour man. It looks sickk!

Ive got three sets of taillights, you can have a set for $50 if you want mate, and yeah i still have the extractors but i think a guy at work is grabbing them, he's buying the car and wants to fit them.
Cheers Nick! Oi i have to grab my two white rims back off Dan if he is going on wednesday, cos im painting them all.
Im having a look at a turbo'd R31 in ipswich tomorrow morning early so that could be interesting!

looks good man..
when u painting my 32??

haha ive been asked by HEAPS of people this week to paint their cars...
Takes me a weekend (two 12 hour days of solid work) to paint a car, including door jambs but not engine bay. Thats if there is no bodywork (dents etc) that need fixing.
Bob Romano Performance Motors charges $120 an hour to have me work on your car haha...

Photos of my two babys...
New gold one is a 1987 Ti, 160,000kms, looks like it just rolled of the showroom floor. Its beautiful!!!

series 2 for the win

also, series two blocks have the points for oil feed and return for a turbo drilled, tapped and plugged from factory = uber easy turbo conversion

do eeeeeeeeeeeettttttt

it is a turbo

No - Its a Ti. Top of the line luxury pack. Doesnt even have an LSD - only the silhouettes got those.
But its fast, and cheap to run! i drive to work and back which is an even mix of highway and city traffic, and i get 8.2L/100kms! Not bad for a big comfy car.
The Ti will NOT be being modified at all - i bought it off a very elderly gentleman and the car literally looks like its about 6 months old, in and out. I went to look at it with the intention of playing around with it, but when i saw it it was pretty clear that this car is NOT to be messed with and modified - its simply too original.
HOWEVER.....
Green Meanie gets registered soon, then it gets coilovers, ext gate turbo, front mount intercooler, bosche pump with surge tank, 3" turbo back exhaust, twin plate clutch, hydraulic handbrake, GTiR front brakes...
So i'll have two rego'd R31's - one an absolute missle that looks awesome, and one for just cruising...

gtir fron brakes :S

get some import struts (or coilovers) and put 32 or 33 brakes on

or if ur going s13 conversions get s14 brakes or 32 or 33 brakes too (and you can go to 5 stud at the same time)

Im comfy with having four studs. less work when changing tyres haha...
Im just transplanting stuff from another R31 straight into it. Pretty sure its running S13 LCA's and steering rack etc.

Hey man its me (my old account was branden ) your car is looking really cool man i like the green!!!! looking sweet as when im at archy next ill try my best to get heaps pics for you

OK so my front lip - which cost me $30 and 8 zip ties, is now fitted. its going to be trimmed into some sort of neat shape (a bit better than it is) and then painted the same dark bronze as the wheels and bonnet. I wanted to leave as much material as possible til it was mounted to the car, to allow me to cut it down a bit further. Its quite large at the moment.
I am making a rear lip at the moment too, will be finished by sunday afternoon i reckon.

is that a flip lip?

if so it looks sweet, well done

Thats exactly what it is :-)

looks the good mate well done

took my 31 for a thrash last night, never really realised how well it slid b4, and this is with a fucked lsd (that never spins twins anymore ) and fucked rear shocks (masses of body roll)

have to say i really enjoyed myself so i can see how you are having so much fun

but.......... you need to turbo it!!!!!!!!!!!! lol

hey robbie i may have found a bar u want! also a whole r31 its good for parts u can get for cheap!

Hey Brad - REALLY dont need another R31!!! what is the front bar...?

I fought u take save the panels just in case u need some spare ones! also i am not sure i tryed calling u in the weekend but u changed your number?

nah bwud number hasnt changed...

haha turns out i missed a number out

Couple of new pics showing the bonnet pins - i had originally bought them for my XB falcon but never used them.
It'll get down to archy again SOME week soonish i bloody hope.

hey mate still got those tinted tail lights, i'll pick up today if your home or meet u some where. txt me to let me know 0413549348