eh-buddy
Mar 7 2009, 03:10 PM
list your gear they must be pre 85 or "old school"
parts wanted or parts for sale
if you have a need for that rare bit thats not at the wreckers but maybe with a boost member list it here
just no new style gear

im after holden coarse spline banjo diff centres and lj torana axles pm me if you have any
WattsyLX
Mar 7 2009, 08:00 PM
QUOTE(eh-buddy @ Mar 7 2009, 04:10 PM) [snapback]1283694166[/snapback]
list your gear they must be pre 85 or "old school"
parts wanted or parts for sale
if you have a need for that rare bit thats not at the wreckers but maybe with a boost member list it here
just no new style gear

im after holden coarse spline banjo diff centres and lj torana axles pm me if you have any
What ratio you chasing?
Ive got a few banjo coarse spline centres, however with my track record i try to collect them!
eh-buddy
Mar 7 2009, 08:41 PM
im after 3.55 or 3.9 if you have a centre out off a grey motored car its a 3.89
WattsyLX
Mar 8 2009, 01:08 PM
Sorry champ, only got one of each - 3.55 and 3.9 centre, but i could try and shake one out of a bloke i know who is bound to have several!
If you wanted a 2.78 or a 3.08 centre, ive got a few spares!
maxrs
Mar 8 2009, 01:22 PM
UC Sunbirds are good for the 3.9-1 diff ratio.
Anyone looking for MK2 Ford Escort parts in S/E Queensland?
PM me if you think i can help.
Mark
eh-buddy
Mar 8 2009, 01:57 PM
QUOTE(WattsyLX @ Mar 8 2009, 01:08 PM) [snapback]1283697212[/snapback]
Sorry champ, only got one of each - 3.55 and 3.9 centre, but i could try and shake one out of a bloke i know who is bound to have several!
If you wanted a 2.78 or a 3.08 centre, ive got a few spares!
if anyones a grey motored holden ie fx to ej there all 3.89 std i only need the crown wheel and pinion
there for hillclimber that i have also i wouldnt mind a 186 block and starfire rods
Sweeney_8874
Mar 8 2009, 02:57 PM
Hey if anyone has a bonnet for an ra23 celica pm me or send me an email at sweeney_8874@hotmail.com
spyder6052
Mar 8 2009, 03:40 PM
FB bonnet bar needed (not the EK one with the emblem)
Pokerchip
Mar 18 2009, 12:43 PM
hey guys, looking for any Rambler parts from 1964 onwards.
pm me or send me an email: pokerchip99@hotmail.com
cheers
DeadSled
Mar 18 2009, 02:28 PM
Hey EH Buddy,
I've got the diff out of my EK.. well its still in the EK.. but you know. Also have a 186 that i may not be using..
I'll be gettin into the Ek in a few weeks to get it finished, so if i end up not using the diff or the 186, i'll let you know.
Keep lookin in the meantime.
eh-buddy
Mar 18 2009, 05:00 PM
QUOTE(DeadSled @ Mar 18 2009, 02:28 PM) [snapback]1283759640[/snapback]
Hey EH Buddy,
I've got the diff out of my EK.. well its still in the EK.. but you know. Also have a 186 that i may not be using..
I'll be gettin into the Ek in a few weeks to get it finished, so if i end up not using the diff or the 186, i'll let you know.
Keep lookin in the meantime.
cheers im in no rush rebuilding the car
p.m sent too
the_random_hero
Mar 18 2009, 08:40 PM
Not super old school but will probably be of great help to some people. We just made jigs for headers to go with HK-ish era Holdens with a 5L conversion. As such, they are nice and cheap

I've got a RA60 Celica in the backyard that's just rusting to pieces. Interior is great, box is great, etc.
oldschoolxy
Mar 22 2009, 03:20 PM
any xw xy xa xb parts might be interested in pm me or let me know via this thread
also have a few here at home if your chasing something
kingjess23
Mar 22 2009, 03:37 PM
Valiant AP5/AP6 parts, pm if you have any, location toowoomba, cheers
Bellaute
Mar 23 2009, 08:31 AM
I am after a Holden EH distributor.
PM me if you have one available, this is to go into a HZ.
: )
eh-buddy
Mar 26 2009, 05:44 PM
has any one got a pair off 13 x 10 rims to suit torana stud pattern im after a pair for my hillclimb car 10" inch or wider
HRLL
Mar 27 2009, 09:56 AM
chassing a 68 galaxie front RHS blinker assembly...
and other various parts if have.
the_random_hero
Mar 27 2009, 06:57 PM
QUOTE(eh-buddy @ Mar 26 2009, 05:44 PM) [snapback]1283801746[/snapback]
has any one got a pair off 13 x 10 rims to suit torana stud pattern im after a pair for my hillclimb car 10" inch or wider

Thought about Superlights?
eh-buddy
Mar 28 2009, 05:49 AM
QUOTE(the_random_hero @ Mar 27 2009, 06:57 PM) [snapback]1283807469[/snapback]
Thought about Superlights?
the biggest they make is 13x8 but the 13x7 have a deeper offset i might buy the sevens and get them widdened though
AZNPRIDE
Mar 29 2009, 11:46 AM
I've got a set of 12 slotters to suit HQ-WB series.. They have 3 centre caps... they are a little rough but would clean up well. Tyres are in GC with 75-80% tread.
eh-buddy
Mar 30 2009, 04:34 AM
ive got an eh banjo diff housing and course spline axles if anyone wants them pm me
discus177
Apr 1 2009, 10:37 AM
I'm after an XB GT / XC GS bonnet with flutes, i'm also after a 302 / 351 clevo.
L4RGE
Apr 1 2009, 09:46 PM
I have a set 13 x 6 globelines off my HR, suit most early holdens.
Also have some tyres for the rims. Check my topics for pics. PM me if interested.
I'm after any HR parts, mainly concerned with finding a heater core and arm rests.
PM if you have anything.
thanks
woody01
Apr 9 2009, 06:06 PM
chasing parts for my 1977 honda civic hatch.
- passengers side door
- rear boot seal
- O out of honda on the boot
- 3 x 12" chrome wheel trims
all i can think of atm
lancercoupe
Apr 12 2009, 12:39 PM
chasing hq holden parts
- chrome bumpers
- genuine mud flaps
- bonnet
- gts dash
- gts guards
- any other gts parts
- arm rests
- rear seat
clutch-monkey
Apr 12 2009, 01:37 PM
hey guys, heard there was an old school swap meet/show n shine at cleveland soon?
eh-buddy
Apr 12 2009, 06:46 PM
QUOTE(lancercoupe @ Apr 12 2009, 12:39 PM) [snapback]1283889377[/snapback]
chasing hq holden parts
- chrome bumpers
- genuine mud flaps
- bonnet
- gts dash
- gts guards
- any other gts parts
- arm rests
- rear seat
ive got a pair off hz gts guards if you want em pm me
lancercoupe
Apr 14 2009, 06:56 PM
no thanks m8
also am chasing a 5 spead gear box for hq holden
Nate_138
Apr 15 2009, 09:27 PM
QUOTE(lancercoupe @ Apr 14 2009, 06:56 PM) [snapback]1283902599[/snapback]
no thanks m8
also am chasing a 5 spead gear box for hq holden
Celica or supra??? how much you willing to spend? is it goin behind a 202?
Nate_138
Apr 20 2009, 05:19 PM
anyone got a old gear knob?? like just a shit old woodgrain one? for the hr wagon i got.
Open to anything old looking just the guy i bought the car off has a shitty dildo looking one on it
harraser
Apr 28 2009, 06:01 PM
Have a uc torana salisbury diff complete drum to drum 3.9 gears mounts modified to suit lh/lx
Iam looking for big block chev engine parts
racerphill
Apr 28 2009, 06:18 PM
QUOTE(harraser @ Apr 28 2009, 06:01 PM) [snapback]1283977508[/snapback]
Have a uc torana salisbury diff complete drum to drum 3.9 gears mounts modified to suit lh/lx
Iam looking for big block chev engine parts
How much for the diff?
harraser
Apr 28 2009, 06:25 PM
550 or nearest offer
Pokerchip
May 1 2009, 12:41 PM
Looking for any rambler parts to suit a 1964 American.
Manily chrome trim parts
PM me with any info you have
lancercoupe
May 2 2009, 09:52 AM
QUOTE(Nate_138 @ Apr 15 2009, 09:27 PM) [snapback]1283909693[/snapback]
Celica or supra??? how much you willing to spend? is it goin behind a 202?
sorry m8 i ment 4 speed and i ahve already found 1
Nate_138
May 4 2009, 12:20 PM
Trying to get some blinds for the back of the hr wagon. Ive seen the ones on ebay but alot of people have got them and they seem to be really off white colour.
Also has anyone tried to put a different model blinds in ej eh wagon ect
cheers
carlover333
May 12 2009, 09:04 PM
Does anyone have a wb service manual?
thanks
PIG208
May 12 2009, 09:05 PM
Anyone have an LC Torana 6 Cylinder Grill???????
Doesn't have to be perfect, but not trashed either.
92ACE
May 13 2009, 02:52 PM
QUOTE (clutch-monkey @ Apr 12 2009, 01:37 PM)

hey guys, heard there was an old school swap meet/show n shine at cleveland soon?
sure is mate, preety sure its end of may, but its on Pinky's website if u want to get exact dates
3000GTCapri
May 21 2009, 09:03 PM
Im after a lhs rear quarter panel for a mk 1 capri.
KAMIKAZE IND
May 24 2009, 02:35 PM
i have a celica 5 speed w57 i want to get rid of, pm me
lc5ltrnev
May 24 2009, 09:48 PM
QUOTE (kingjess23 @ Mar 22 2009, 03:37 PM)

Valiant AP5/AP6 parts, pm if you have any, location toowoomba, cheers
hi have ap5/6 sedan wayfair ute am wrecking
lc5ltrnev
May 24 2009, 09:52 PM
QUOTE (discus177 @ Apr 1 2009, 10:37 AM)

I'm after an XB GT / XC GS bonnet with flutes, i'm also after a 302 / 351 clevo.
hi have xb wagon gs bonnet grill dash steer wheel 302 auto 2 way tail gate
lc5ltrnev
May 24 2009, 09:58 PM
QUOTE (PIG208 @ May 12 2009, 09:05 PM)

Anyone have an LC Torana 6 Cylinder Grill???????
Doesn't have to be perfect, but not trashed either.
have you seen the price of them on ebay say grill 1500 no shit
eh-buddy
May 25 2009, 05:05 AM
i'm after a kombi if anyone knows where one is sitting dont care too much if its running or even rusty/written off ill look at anything prefer a std van or single cab ute not a poptop but whatever comes
pm me if you know off anything
lancercoupe
May 25 2009, 05:16 PM
wanted parts for hq
chrome washer bottle
chrome dipstick
chrome bonnet hinges
chrome brake booster
carlover333
May 25 2009, 10:03 PM
ive got some spare doors and wheel wells and pedals and a brake booster and 2 different calipers.
they wont be going yet as my wb is still in the build but if i dont use them someone might want them.
one of the doors has rust in the bottom, the other is good though.
panels are for wb, dunno about the other stuff
Nate_138
May 29 2009, 08:29 PM
WTB need a indicator switch for a ej eh hr hd ! cheers
HRCruiser
May 29 2009, 10:30 PM
QUOTE (Nate_138 @ May 29 2009, 08:29 PM)

WTB need a indicator switch for a ej eh hr hd ! cheers
Few of them on flea bay mate. Or try Andrew at A&B Holden wreckers at Slacks Creek. He has just gotten a HR Prem in not so long ago, few good parts left ....
A & B Holden Wreckers
Factory 2/ 18 Aranda St, Slacks Creek, QLD 4127
p: (07) 38081678
lancercoupe
May 29 2009, 11:08 PM
might be 1 at barsby wreckers
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please
click here.