Help - Search - Members - Calendar
Full Version: New Budget Motorsport Comming To Adelaide
Boostcruising.com > Global Club Discussions > AU: South Australia
GROWLY CUSTOM CNC
Hello everyone,

Just putting the word out :- there is a new form of motor sport starting close to Adelaide in the near future, with a track currently being built at Dutton aprox 85 km from the cbd . If you haven't heard of Dirt circuit, it is the cheapest form of organised motor sport in S.A and also one of the largest with over 300 cars competeing. Dirtcircuit is a truly unique sport which combines elements from many motor sports :- the sideways action of drift, speedway & rally, the straight line speed of the drags and the driving techniques of circuit racing. There are currently 9 specially constructed dirt circuit tracks in regonal South Australia that range in length from 700m to 1000m. Features of the tracks include chicanes, hairpins, sweepers, long and short straights ect... . Track layouts allow most cars to hit top speeds of between 140-200 kph. Tracks are constructed of clay, limestone or an oil impregnated surface. . Racing is run with up to 10 cars competing in 6 lap sprint races, in both directions. Every driver participates in 5 races per meeting including a 10 lap allcomers race. In all classes there is a aprox 30+ races per meeting. Due to the racing format a car can have two drivers, which halves the cost of racing if you build a car with a mate. Kids as young as 10 can drive in restricted childerens races.

The classes are as follows :-

New standard class :- VN -VT and equivelant falcons. No mods allowed ( Cars can be built for $1000 or less in this class )

Street stock :- Carby cars up to 4.2 L, valiants, falcons, commodores ect.. . Mods:- 350 cfm carbies, aftermarket cams and extractors, original engine position and no fibre glass panels.

Modified saloon :- Anything goes in this class :- Steel bodied cars , space frames, fibre glass bodys, standard, mid or rear mounted engines, turbos, blowers, injection, any vehicle engine combo eg :- 400 ci chev mid mounted in a Datsun 180 B ( don't laugh there are a few v8 powerded datsuns out there ). Cars in this class range from cheap wrecking yard racers to 600+ hp ,supercharged, spaced framed sedans and yes the 100 hp cars do occasionally battle it out in the same race with the 600hp cars. This class caters for all budgets again a car could bee built for less than $1000.

Open wheelers :- Again anything goes. No restrictions on engines, running gear ect.. . This class allows you to build a unique chassis / race car of your own design. Many cars run mid mounted V8s, auto transmissions, 9" diff or irs. There are now alot of turbo jap cars being built to give the v8's a run for thier money. These cars normally weigh between 600kg - 1000kg, so even with a standard engine you can achieve a great power to weight ratio. Its not unheard of for people to build cars exceeding a v8 supercar power to weight ratio for much less than $10k.

Here the best part, subs for the year costs only $20-00 per driver, there is a $10 nomination fee for each race meeting and we don't charge an arm or a leg to spectate :- Adults entery fee is only $5-00 at the gate . There will be a total of nine race meetings a year at the new club, but if you have the time you could race every weekend at any of the other 9 tracks. Each year there are 2 rounds of the State championships which is rotated between clubs.

If any one in the Metro area is interested in racing dirt circuit, we can volunteer experienced drivers to help you build a car and even source cheap materials and parts to get you out on the track. If you want any other information please call Matt on 0447739992 or email Matt@growly.com.au . There will be a free open day at the track in July for all those that are interested. We should have a good mixture of all types of cars racing and on display. I will put another post up when I have a firm date for the open day.

Cheers Matt Stirling

Here a few pictures :-

IPB Image

IPB Image

IPB Image


IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image


IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image
Rust
Only about 50 minute drive for me, it might give me an excuse to use the Jeep chassis sitting on my lawn.
SuperMazdaKart
sounds pretty good, be a good reason to get the Familia GTR out in some rally driving
All Torque
yea definatly sounds good smile.gif
mazdaguy01
This looks like a great format. Might be time to build myself a new toy smile.gif
SuperMazdaKart
We could all build a Scrappy Racer in 10 hours of time. Anyone watch Scrapheap Challenge? lol
mazdaguy01
QUOTE(SuperMazdaKart @ Mar 3 2009, 03:41 PM) [snapback]1283671196[/snapback]

We could all build a Scrappy Racer in 10 hours of time. Anyone watch Scrapheap Challenge? lol


Lol its so on!!!
I have just been looking at some import supra's or 180's. A car a angle grinder and some tube steel and were in business lol
SuperMazdaKart
Haha,

Find a diesel engine that can work under water, box chassis, make some tracks to attach to the wheels, DIY afterburner.

yeh! "Proper Job!"
Rust
What do you think guys, I have:

Bumpers, steering gear, shocks and crap.

IPB Image

Chassis.

IPB Image

Rebuilt Cleveland that will only be used for the next 9 months.

IPB Image

Spare C4.

IPB Image

Some funky seats.

IPB Image

Carb, Alternator, Water pump.

IPB Image

Should I build a dirt racer? tongue.gif
TUF UTE
New standard class :- VN -VT and equivelant falcons. No mods allowed ( Cars can be built for $1000 or less in this class



lol 1000 dollar vn's are dangerous enough on the road lol... sounds like cheap dangerous fun though
B3ll3
omg mundi.....where u get all that stuff?

OT - CAN IT BE PINK????? biggrin.gif
Charmed
QUOTE(NIZMO-R33 @ Mar 3 2009, 06:16 PM) [snapback]1283672156[/snapback]

omg mundi.....where u get all that stuff?

OT - CAN IT BE PINK????? biggrin.gif


drool.gif

Hell yes

And I think we should all go up to Mundi's to watch the build up laugh.gif
B3ll3
QUOTE(Charmed @ Mar 3 2009, 05:19 PM) [snapback]1283672174[/snapback]

drool.gif

Hell yes

And I think we should all go up to Mundi's to watch the build up laugh.gif

hehe im up for a road trip to mundi's! thumbsup.gif
Charmed
QUOTE(NIZMO-R33 @ Mar 3 2009, 06:22 PM) [snapback]1283672195[/snapback]

hehe im up for a road trip to mundi's! thumbsup.gif


We can be supervisor's and the boys can work laugh.gif
B3ll3
QUOTE(Charmed @ Mar 3 2009, 05:25 PM) [snapback]1283672210[/snapback]

We can be supervisor's and the boys can work laugh.gif

lol sounds like my kinda plan... mamoru.gif
Rust
If it's pink, it'll have to be pornstar pink -

IPB Image

I'll also need to weld up some chassis gremlins, as it previously had a 5 litre and had done a bit of air time...

If everyone can keep their eye's peeled for a small coupe/fastback body that I can bastardise for it, that would be great, as one of my mates decided the Jeep body was an unwanted accessory that should be attacked with a 9" grinder angry.gif .

You guys are welcome to visit once I have the ball rolling smile.gif .
B3ll3
QUOTE(lostheadcase @ Mar 3 2009, 05:33 PM) [snapback]1283672268[/snapback]

If it's pink, it'll have to be pornstar pink -

IPB Image

I'll also need to weld up some chassis gremlins, as it previously had a 5 litre and had done a bit of air time...

If everyone can keep their eye's peeled for a small coupe/fastback body that I can bastardise for it, that would be great, as one of my mates decided the Jeep body was an unwanted accessory that should be attacked with a 9" grinder angry.gif .

You guys are welcome to visit once I have the ball rolling smile.gif .

you rock mundi!!!!! biggrin.gif
Charmed
QUOTE(lostheadcase @ Mar 3 2009, 06:33 PM) [snapback]1283672268[/snapback]

If it's pink, it'll have to be pornstar pink -

IPB Image



ohmy.gif

I think you need to paint my car that colour oopsie.gif
B3ll3
QUOTE(Charmed @ Mar 3 2009, 05:39 PM) [snapback]1283672301[/snapback]

ohmy.gif

I think you need to paint my car that colour oopsie.gif

hehehehe OUR cars that COLOUR drool.gif drool.gif drool.gif drool.gif
Rust
QUOTE(Charmed @ Mar 3 2009, 05:39 PM) [snapback]1283672301[/snapback]

ohmy.gif

I think you need to paint my car that colour oopsie.gif



QUOTE(NIZMO-R33 @ Mar 3 2009, 05:46 PM) [snapback]1283672347[/snapback]

hehehehe OUR cars that COLOUR drool.gif drool.gif drool.gif drool.gif


eek3.gif Still need to paint my daily...
mazdaguy01
Mundi with that pile of parts you could build a very nice little racer... Boost represent lol!!!

Im going to keep an eye out on the import auctions and pick something up. Should be heaps of fun!!!!
Rust
QUOTE(mazdaguy01 @ Mar 3 2009, 05:52 PM) [snapback]1283672398[/snapback]

Mundi with that pile of parts you could build a very nice little racer... Boost represent lol!!!

Im going to keep an eye out on the import auctions and pick something up. Should be heaps of fun!!!!


The neighbors must think I run a chop-shop....
It's just stuff that friends didn't need, or that I accepted as payment, or was swapped out.
TUF UTE
RA60 CELICA MUNDI !!
Charmed
QUOTE(NIZMO-R33 @ Mar 3 2009, 06:46 PM) [snapback]1283672347[/snapback]

hehehehe OUR cars that COLOUR drool.gif drool.gif drool.gif drool.gif


Fuck yes lol facesjump.gif

GROWLY CUSTOM CNC
QUOTE(lostheadcase @ Mar 3 2009, 04:53 PM) [snapback]1283671791[/snapback]

What do you think guys, I have:

Bumpers, steering gear, shocks and crap.

IPB Image

Chassis.

IPB Image

Rebuilt Cleveland that will only be used for the next 9 months.

IPB Image

Spare C4.

IPB Image

Some funky seats.

IPB Image

Carb, Alternator, Water pump.

IPB Image

Should I build a dirt racer? tongue.gif


You have got a bloody good starting point. As I see it you have two options whith that chassis, either drop a shell over top or build an open wheeler. In both casses I would cut the tailshaft down to about 1 1/2 feet (I can do this for you) and then mid mount the clevo. I would drop the chassis down about a foot or more and then use a HT front suspension and HQ brakes , the ht suspension is proven with a majority of the open wheelers using them, There are a few modifying tricks eg :- lay the cross member back on a 17 degree angle ect.... The rear diff will be suitable. We will run our first race meeting in 2010 so there is plenty of time to build a project like this.

QUOTE(mazdaguy01 @ Mar 3 2009, 06:22 PM) [snapback]1283672398[/snapback]

Mundi with that pile of parts you could build a very nice little racer... Boost represent lol!!!

Im going to keep an eye out on the import auctions and pick something up. Should be heaps of fun!!!!


If any of you guys are keen, Pm me you phone number and address and I will post a copy of the construction rule book. We may do a road trip to another track in the near future so everyone that is interested can check out the cars and meet some of the other drivers, I recommend that you attend the free open day at the new track in July.

Cheers Matt.
GROWLY CUSTOM CNC
He's a few pictures of our current build. It will run a 300kw atw 1JZ, 5 speed box, R200 diff, side mounted radiators, custom suspension ect.... Because of the open design rules we are running an venturi and skirts under the car. You din't need to get that carried away :- the current openwheeler state champion runs a mid mounted 351, auto, jag diff and holden front suspension. Hopefully we will have it running for our first race meeting.

IPB Image

IPB Image

IPB Image

IPB Image

IPB Image
mazdaguy01
QUOTE(GROWLY CUSTOM CNC @ Mar 4 2009, 09:48 AM) [snapback]1283675915[/snapback]


If any of you guys are keen, Pm me you phone number and address and I will post a copy of the construction rule book. We may do a road trip to another track in the near future so everyone that is interested can check out the cars and meet some of the other drivers, I recommend that you attend the free open day at the new track in July.

Cheers Matt.


PM sent smile.gif
TUF UTE
nooo no cover on it ... rat rod stlying for the win !
GROWLY CUSTOM CNC
Dirt drifting :-Here is a recent video of a mid mounted v8 falcon on a very loose track :- http://www.youtube.com/watch?v=qMgk_dEI0PA
GROWLY CUSTOM CNC
Here's another video taken a the Roxby track. They have put oil on their track and it has packed down like bitumen. There isn't much sliding but a heap of traction as you can see from the way the last open wheeler pulls out of the corner.

http://www.youtube.com/watch?v=5y1Ycq8TfZ0
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.