NEVER BEEN TO A BTA DYNO DAY? WELL YOU ARE MISSING OUT!
GET YOUR NAME DOWN IN THIS THREAD AND GET STRAPPED IN FOR A AWESOME DAY!


GUYS IT'S TIME TO RIP UP THE ROLLERS! ALL CARS WELCOME!


BTA Motorsports in association with Nizpro Turbocharging, Nizpro Dealers and Suppliers are holding this years second National Dyno Day.

How this works:

The National Dyno day is part of a 3 Day Dyno Competition. The first was on Saturday June 16th 2007. We are now ready for round 2, Saturday October 20th 2007. You can enter even if you did not compete in the last dyno day.

The dyno day will be held at BTA Motorsports and also on the same day in VIC, WA, QLD & SA.

If you will be attending the dyno day at BTA Motorsports, please read the details below, and add your name to the list in this thread.

If you will be attending the dyno day in your state, contact the appropriate Dealer/Supplier below.


Details:

Date: Saturday October 20th
Start time: 9 am
BTA Motorsports
Unit 2, 13 Harp St,
Campsie. NSW. 2194
Phone: (02) 9789 6075
Price: $50 for 3 runs, Includes a Printout.

Details: This dyno day is open to any vehicle make/model!
There is no horsepower limit, and Blowers etc are all welcome to be used.

There will be trophies awarded on the day.


Classes:

4 Cylinder Naturally Aspirated
4 Cylinder Forced Induction
6 Cylinder Naturally Aspirated
6 Cylinder Forced Induction
8 Cylinder Naturally Aspirated
8 Cylinder Forced Induction

There will be a BBQ and refreshments and nibbles served on the day.

What do you need to do?

1. Ensure you have at least 1/2 tank of fuel, there is nothing worse than running low on fuel on a full power run.
2. All vehicles must have exhaust systems complete from front to back.
3. If you have any special requirements in relation to the way to vehicle will be run, please let us know in advance.
4. The dyno day is held for rear wheel drive cars only, with the exception of 4WD's ONLY if they you take out your front drive shafters before arriving.

Legal Terms:

Prior to placing the vehicle on the dyno, you will be giving a form to sign authorising your vehicle to be placed on the dyno.

1. You must state on that the max RPM range to take your vehicle to.
2. By placing the vehicle on the dyno, and signing this form, we do not accept any responsibility whatsoever, in any way, manner or form in relation to any Engine/Fitment damage that may occur to the vehicle or yourselves.
3. Before your run, it is expected that the vehicle is warmed up and ready to go on the dyno.
4. Remember to check that your vehicles oil and water levels are correct.

What do I do now?

Put your name in this thread if you will be attending the day (October 20th), at BTA Motorsports in Campsie Sydney.

Remember, if you are not in NSW and want to attend the day at another location, contact the below Dealers/Suppliers for their information!


Our Details:

NSW:

BTA Motorsports
Unit 2, 13 Harp St,
Campsie. NSW. 2194
Phone: (02) 9789 6075

OTHER LOCATIONS FOR DYNO DAY 20th OCTOBER!


WA:

Xtreme Ford Tuning
16 Runyon Rd
Midvale. WA. 6056
PH: (04) 3340 5278

QLD:

Elite Automotive
166 Beatty Road
Archerfield, QLD 4108
PH: (07) 3274 2445

SA:

Adelaide Performance Engineers,
A division of Graham West Workshops Pty Ltd.
668 Marion Road Park Holme
South Australia.
PH: (08) 8277 5688

SA:

Morpowa Auto & Dyno Centre,
14 Famechon Cresent
Modbury North 5092. SA
PH: (08) 8264 2906