Help - Search - Members - Calendar
Full Version: Painted Tail Lights
Boostcruising.com > Technical > Technical Articles / How-To / FAQ
Medic_01
this is what boredom does to you. i painted my tail lights on my 04 accent one afternoon due to the lack of Altezza Clear Tailights for my model.

step one, remove tail light and mask areas not to be painted using masking or packing tape. Use thinner tape around any curves for a sharp finish. the removal was simple enough, just opening the hatch and unscrewing the light, then it just fell out. unclip the bulb wires, remembering which one whent where.

[attachmentid=41253] [attachmentid=47306]

[attachmentid=41254] [attachmentid=47307]

then using a spray can of plastic trim primer from any auto shop like supercheap, or auto one. lay down some coats, keeping them thin, it's better to do more thin coats than one thick one, (better finish). after which i followed with a can of spray paint that matched my paint code, (mixed at Auto 1).

[attachmentid=41255]

when dry, apply top coat clear, (or similar) spray paint and remove masking tape. clean any edges that are not straight, and re-install.

[attachmentid=41256]

there it is installed. it looks better than it was, but i have yet to clean the edges properly. don't wash the car for a day or so until it has set properly.

[attachmentid=41258]

it will do untill i can find Altezza style lights for my make.
opinions please..
mooky
one thing i would have use 3m fine line tape to do all the edges and that would have givin you razor sharp edges and no need to clean them up after
kikxz
looks nice man, good job
DreamensioN
That looks good - well done!
Matty_T
well done!! my opinion they look better than the altezzas. At least yours are original one of a kind, cool!!!!!!
PARIAH
Yeah ALteza'a are so overdone now
TRX_2012
you are telling me mate - every bloody honda i see has them!!
OIM.666
Thats well done mate.
fat tony
damn that looks good didn't Know it could be that easy. and it looks alot better than altezers
Medic_01
Cheers.

biggrin.gif
MJG
Haha! Holy shit, that looks brilliant. Great idea mate, don't even contemplate Altezza's now, I wouldn't change that a bit. Awesome facesjump.gif
TPG
dont agree with that honda comment - but meh over it.

nice work looks pretty good mate
Devil14
Awsome idea looks great also you think you could aply this to other cars and have it look as good?? Maybe como's


Tim.
caseyjohnphotography
very well done mate, good job with the lights..
MJG
For the record, I have been flicking through old Hot 4s mags, and there are at least 2 Accent's with Altezza lights, so they are definitely available tongue.gif

However, this looks much better thumbsup.gif
DerekGt
looks great! im planning on doing this to my n14 SSS... for some originality ... especially considering they dont make the rear clear tails for the N14 either! great work bud
Aleksi
That does look good!

Awesome job! And who thought boredom pays off once in a while...

Lancers = clear lights
CAREZ
yeah my mate has lancer gli with altezza lights
WAKU WAKU SAN !
looks better than altezza lights......more car has altezza than does not have altezza. eg. lancers look better with stock tail lights because 70% have clear. if i had mazda 6 or other car that come with clear lights i would get custom "non clear" tail lights for it. just my oppinion.
SMiTHBRo
ahh nice work they look great, might have to look into this for my car smile.gif
pImPiN_tHe_pInK
looks kool but i dont think i wud do that to my car
ming_s13
looks good nice work
delspek
looks good man
dwvr
looks good mate, im waiting see somebody put s sticker on to mask it so they get text or graphics on their lights
free idea for anybody doing a show car.
pattis
You should put a clear coat on the whole light when you have cleaned the lines up so it won't scratch as easy and will remove some of the bump when you drag you fingers over the paint. Good idea man!
*looks over at the spare vk tail lights*
Medic_01
thanks.
i have since cleaned the edges up, and they look very sharp.

for an eaiser alternative, one could use vinyl stickers, not as permanent, and easily reversed.
mds
hi just wondering is this legal in QLD?
Patch
looks really good...goodwork
Medic_01
can't see why it isn't legal. (havent been picked on yet)

the lights are still visible, brake, indicator, reverse and the "reflective" bits. i just painted all the other red plastic lense.

Benny R,
awesome idea mate looks really good, pretty cheap way of doing it rather than buying new tail lights
jared_pulse
i like that, im goin straight to my tail lights now haha
cheers
WizardHat
Looks good dude, Well done.
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.
Invision Power Board © 2001-2009 Invision Power Services, Inc.