Lancer Evolution Mr, race, street, show car Options

[lancercoupe]

I really spent lots of time on this, going over the car after i finished to clean up parts that i stuffed up on. Hope you like it. Please leave comment

This post has been edited by lancercoupe: Oct 31 2009, 02:53 PM

[Vegas]

Damn that looks shit i dont see where all the time was spent

[lancercoupe]

obviously people have different tastes

[Vegas]

obviously people have different tastes

No your just an idiot with no taste

[Matty Lowe]

i have said it once and ill say it again....your chops make me sad

[chayeah]

ummmmmmmmmmmm yeah what matty lowe and vegas said

[Ride!BMX]

bit silly. but getting better

This post has been edited by Ride!BMX: Oct 31 2009, 11:36 PM

[midget-boy]

get rid of the vinyl and it may actually be ok

[mullo]

i agree that is a pretty poor effort, particularly if you have spent a lot of time on it, try to use some imagination add some parts, bumpers, skirting, when you add writing try to change the setting from normal to overlay, or colour or linier dodge/burn which ever one looks best and lower the opacity to give a more realistic effect, it also looks like you blurred the crap out of all your edges, try lowerning the % of blur to lessen the impact.

vegas - matty - chayeah you should post your chop of the same car for criticism, and maybe give some helpful hints for lancercoup and then some improvements will come

here is what i came up with in about 3 hours



enjoy

This post has been edited by mullo: Nov 2 2009, 01:35 PM

[lancercoupe]

i agree that is a pretty poor effort, particularly if you have spent a lot of time on it, try to use some imagination add some parts, bumpers, skirting, when you add writing try to change the setting from normal to overlay, or colour or linier dodge/burn which ever one looks best and lower the opacity to give a more realistic effect, it also looks like you blurred the crap out of all your edges, try lowerning the % of blur to lessen the impact.

vegas - matty - chayeah you should post your chop of the same car for criticism, and maybe give some helpful hints for lancercoup and then some improvements will come

here is what i came up with in about 3 hours



enjoy

nice job there m8. When i put the vinyl on i changed the setting to screen. would overlay have look'd better

[lancercoupe]

when ever i try to put a body kit on a car it turns out something like this

[midget-boy]

i dont mind that ^^^

[mullo]

just try all the settings, some of them will look better than others, but you have to lower the opacity a little and it will then show through some of the light and shade of the car panels, your window ones look ok, with the skirts/bumpers, some of them just wont work very well, it is always better to have more panel on the skirt/bumper than is needed, then cut it out to the lines that the original car has, then use the eraser tool to blend out the panel edge, then you have to hue/sat and bright/contrast to get it to look as close a possible, then in some cases you will have to burn/dodge the added panels to add shading in the right areas (with the rear bumper you needed to burn the top of the bumper for it to match the darkness of the original car, keep the burn setting down to 4 or 5 with low flow, you will have to make a lot of passes but slower is better so you dont over do it, also you could erase the edge with around 10% with around 15%flow which will bring some of the original shading/colour through)

keep trying it all gets easier, i have only been casual photoshoping for around a year now, keep looking up some of the tutorials they always help
this one at carchops is quite good - car chops
and a big list here - photoshop tutorials

good luck

[Slav]

mullo is epic

[VTR]

I'm no expert on this but can't say the first chop is that great,the Honda S2000 is not too bad.

[H3R3TIC]

when ever i try to put a body kit on a car it turns out something like this

did you honestly chop this, its not like you lol

[lancercoupe]

did you honestly chop this, its not like you lol

yea, i didn't post it up cause people at the time were saying it was shit

[mullo]

just a little tidy up on this one, all you needed to do was to stretch the rear bumper to the shaded line and slightly erase out to create a smooth edge with some minor cloning to blend in, minor touch up on the side skirt, and extended the original car shape towards the front under the door, lifted the vent, minor touch up around the wheels, burned the areas of the car that are visible from inside of the wheel arch, cut the pic to remove the overlap at the top of the pic, and slightly change the contrast of the whole pic to give a slightly different look, other than that what you had done was pretty good actually, the only other thing i would suggest is to slightly adjust the rear spoiler as it seems to be sitting too far to the right of the pic (which i didnt do)

[midget-boy]

take that much time and they will look sick as

[lancercoupe]

people said that this was my best chop ever. would this be true.

This post has been edited by lancercoupe: Nov 7 2009, 03:49 PM

[mullo]

pretty good mate, only your cut edges around the black and the edges of the wheels is a bit how's ya mother, otherwise not too bad, looks like your edges are better from some of your recent pics, just have to zoom in far enough to get a good line

(tip - to quickly move the pic in any direction when zoomed in close, simply hold the space key/button and use the mouse to drag the pic in any direction you need, this is helpful when cutting around wheels or the body of the car)

and the touch ups on the honda only took 15-20 min, just a quick job

[midget-boy]

its damn good, the only thing i'd change is the rims, try the same chop only with show wheels (type it in on google images)

[trommie]

the original wouldv looked good if youd stopped at the wheels and paint.
that green s2k is alright, minus the wing it would look tonns better imo


This post has been edited by trommie: Nov 15 2009, 09:26 PM