Vy Ute Diff Cradle - will v6 diff cradle fit v8 vy  

mudchucka
  • mudchucka
  • Site Newbie
  • Member No.: 386,402
  • Joined: 26-November 16
  • Posts: 1
Post #1 post 26th November 2016 - 10:25 PM
help
recently got superpro bushes fitted by selbys tuggerah into diff cradle within a month crossmember bolts came loosecar was all over road scared shit outa me went back and he refitted and realigned a few months later same thing happened only lot worse went around a corner wasn,t fast and clunk ripped out one remainig bolt drivers side [outer] inner completely gone and the passenger side inner bolt gone outer bolt still in but hole ground out almost completely drivers side wheel sitting against inner guard I did feel this happening but when i checked bolts they were still there but couldn,t see they were loose again or the wear went back to selbys tuggerah but suprise surprise sold to pedders and gone
so here,s the thing I brought a complete diff cradle from wreckers outa later vy he recons its got 2 extra arms that apparently help with camber issues got it home and cleaned up ready to go in but while I,m considering changing over the superpro bushes[ minus the ones the bolts came outa] there is only one exhaust mount so I think it is a v6 not v8
my question is will it fit straight in if i weld on another bracket or should I return it which is going to be a major hassle borrowing a ute ect can anyonyone advise me i would be most grateful
  • Member Login

    If you have a BoostCruising account enter your user name and password into the yellow box.

    Alternatively, you can quickly login with Facebook.

    If you don't have an account create one below.

    Create Account
  • Login with Facebook

    Login using your Facebook account!

2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
Loading...
x