This kit is brand new. My engine seized before i could put it on. Everything you need to go from carby to EFI. This kit can be used on any bike from 200cc to 300cc. All you would need to do is email the company to email you the correct tune for your bike, and use the stuff in the kit to load that tune onto the ECU.
Info: This EFI kit has below features: Electronic fuel injection (EFI) ECU controlled ignition system (CDI or inductive coil) Close-loop controls with an O2 sensor Dual fuel maps selectable by a manual switch (Performance Switch: ECO vs. RICH Mode) High fuel efficiency and low carbon emissions Decel-fuel-cut-off On board self-diagnosis with a MIL lamp Performance tuning for advanced users On-the-fly calibration Parts: 1.ECU 2.Harness (including the connectors) 3.Throttle Body Assembly or 34mm Throttle body (with IAC motor, and TPS sensor) Fuel injector (38/60/80/128/190g/248g/min) 4.Fuel pump assembly Fuel pump (compact size:38mm diameter) (comparative low power: 2A current) (Flow rate: 25L/h) Fuel pressure regulator(3bar) Fuel filter fuel hoses and clamps 5.MAP sensor (1.05bar) 6.Engine temperature sensor 7.Intake air temperature sensor 8.CDI - for ECU controlled spark advance (included, for both fuel and spark controls, fully programmable) 9.Oxygen sensor and bungs (included, to have close-loop fuel and self-tuning features) 10.Serial communication cable (to a computer) 11.USB adaptor (included, USB connectivity, and no more RS232 port needed) 12.CD - free tuning software (also downloadable) Categories: EFI Kit for 200cc to 300cc 1-cylinder engine (34mm throttle body)