#1
3rd September 2009 - 03:19 AM
Post |
|
---|---|
So, for no reasons other than wank factor and because I think I can, I'm going to plumb my UHF's external speaker output through my car's stereo using auto switiching relays so that I can cruise along listening to the radio or cd's but then when the squelch is broken on the UHF and there's a signal coming thru the ext. speaker, the radio is automuted and I hear the transmission through the 4 speaker in the car. Here is what im thinking, apologies for the crappy and confusing terminology again: The relay i can get from Jaycar is essentially a 4 in 1 so ill only need 1, but its easier in the drawing to put 4. This is what the dude at Jaycar suggested to me and what seems like the gayest idea ever: However i fear hes right as the external speakers on UHFs are only 5w, so i dont think it would be able to power 4x40w speakers as i my car. Lotssssss more farting about as i cant fit an amp behind my dash like i could the rest of this wiring! I was thinking about just going to Cashies and getting a small, cheap amp and just running the UHF through it as the audio in my car is fine as is. Less wiring, less of lots of things really. And i could fit a small one under my seat. Also, my research suggests that external speakers run at 8ohm as opposed to my car audio at 4ohm so i would need to drop that resistance somehow, yeah? Food for thought. Im thinking about just jigging up the original diagram and trying my luck as is. |
GTRwilson
Post #3
why does it have to be on a relay? Ive got mine setup(when i rarely use it) so the scanner just pugs into the AUX cable, which then runs through the HU, then amp, then car speakers. |
---|
If you have a BoostCruising account enter your user name and password into the yellow box.
Alternatively, you can quickly login with Facebook.
If you don't have an account create one below.
Create AccountLogin using your Facebook account!